Canon iR1600 Series Service Manual page 559
Hide thumbs
Also See for iR1600 Series:
- Copying manual (70 pages) ,
- Reference manual (194 pages) ,
- Service manual (554 pages)
Table of Contents
Advertisement
E719
The communication between the card reader and the image processor
PCB is disrupted.
Possible cause The wiring is faulty (short circuit, open circuit). The card reader is faulty.
The image processor PCB is faulty.
Note
Be sure to clear the error in service mode : #12 CLEAR>CARD.
Remedy
1) Connector
NO : Correct the connection.
2) Image processor PCB
YES : End.
NO : Replace the image processor PCB.
If E719 is indicated, the fault in communication is retained by the RAM
on the image processor even when the power switch has been turned off
and then on; be sure to execute #12 CLEAR>CARD in service mode be-
fore making corrections.
E733
The communication between the DC controller PCB and the image pro-
cessor PCB is disrupted.
Possible cause The flexible cable is faulty (short circuit, open circuit). The DC controller
PCB is faulty.
The image processor PCB is faulty.
Remedy
1) Connector
NO : Correct the connection
2) DC controller PCB
YES : End.
NO : Replace the image processor PCB.
COPYRIGHT© 2002 CANON INC.
Is the connection and the wiring for the connector (J1131) of the
card reader and the connector (J10/J210) on the image processor
PCB normal?
Try replacing the card reader. Is the fault corrected?
Is the connection and the flexible cable for the connector (J104) on
the DC controller PCB and the connector (J35/J235) on the image
processor PCB normal?
Try replacing the DC controller PCB. Is the fault corrected?
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
13-181
- Quick Links:
- System Configuration
- E010/E100
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
