Page 1 Administration HiPath 8000 OpenStage 20/40 OpenStage 60/80 www.siemens.de/enterprise...
Page 3: Table Of Contents
1.6.3 OpenStage 20 ........
Page 4 bkTOC.fm Inhalt Nur für den internen Gebrauch 3.3 IP Network Parameters ..........3-10 3.3.1 Quality of Service (QoS).
Page 5 bkTOC.fm Inhalt Nur für den internen Gebrauch 3.6 Multiline Appearance/Keyset ......... . . 3-50 3.6.1 Line key configuration .
Page 6 bkTOC.fm Inhalt Nur für den internen Gebrauch 3.12.1.2 HTTP Proxy ..........3-101 3.13 Password .
Page 7 bkTOC.fm Inhalt Nur für den internen Gebrauch 5.1.1 Web Interface Menu ..........5-1 5.1.1.1 Menu Structure .
Page 8 bkTOC.fm Inhalt Nur für den internen Gebrauch A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 9: Overview
uebersicht.fm Overview Important Notes Overview Important Notes Do not operate the equipment in environments where there is a danger of explosions. For safety reasons the phone should only be operating using the supplied plug in power unit. Use only original Siemens accessories! Using other accessories may be dangerous, and will invalidate the warranty, extended manufacturer’s liability and the CE mark.
Page 10: Maintenance Notes
uebersicht.fm Overview Maintenance Notes Maintenance Notes Do not operate the telephone in environments where there is a danger of ex- plosions. Use only original Siemens accessories. Using other accessories may be dan- gerous, and will invalidate the warranty and the CE mark. Never open the telephone or a key module.
Page 11: The Openstage Family
uebersicht.fm Overview The OpenStage Family The OpenStage Family 1.6.1 OpenStage 60/80 The Handset lets you pick up and dial calls in the usual manner. The Graphics Display provides intuitive support for telephone operation. The user-friendly Application Keys provide easy access to your telephone’s applications.
Page 12: Openstage 40
uebersicht.fm Overview The OpenStage Family 1.6.2 OpenStage 40 The Handset lets you pick up and dial calls in the usual manner. The Graphics Display provides intuitive support for telephone operation. The user-friendly Application Keys provide easy access to your telephone’s applications.
Page 13: Openstage 20
Overview Administration Interfaces 1.6.3 OpenStage 20 The Handset lets you pick up and dial calls in the usual manner. The Display provides intuitive support for telephone operation. The user-friendly Application Keys provide easy access to your telephone’s applications. Press the Function Keys to access frequently used telephony functions.
Page 14: Deployment Service (Dls)
uebersicht.fm Overview Administration Interfaces 1.7.2 Deployment Service (DLS) The Deployment Service (DLS) is a HiPath Management application for administering phones and soft clients in both HiPath and non-HiPath networks. It has a Java-supported, web-based user interface, which runs on an internet browser. For further information, please refer to the Deployment Service Administration Guide.
Page 15: Startup
inbetriebnahme.fm Startup Prerequisites Startup Prerequisites The OpenStage phone acts as an endpoint client on an IP telephony network, and has the fol- lowing network requirements: • An Ethernet connection to a network with SIP clients and servers. Only use switches in the LAN, to which the OpenStage phone is connected. An operation at hubs can cause serious malfunctions in the hub and in the whole network.
Page 16: Assembling And Installing The Phone
inbetriebnahme.fm Startup Assembling and Installing the Phone Assembling and Installing the Phone 2.2.1 Shipment • Phone • Handset • Handset cable • Subpackage: • Document „Information and Important Operating Procedures“ • Emergency number sticker • Emergency Number Sticker 2.2.2 Connectors at the bottom side OpenStage 60 Keyboard Power supply...
Page 17 Startup Assembling and Installing the Phone OpenStage 40 (similar to OpenStage 20, except [1] OpenStage 40 only Power supply Switch Headset Key Module Handset A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 18: Assembly
inbetriebnahme.fm Startup Assembling and Installing the Phone 2.2.3 Assembly Handset Insert the plug on the long end of the handset cable into the jack on the base of the tele- phone and press the cable into the groove provided for it. Next, insert the plug on the short end of the handset cable into the jack on the handset.
Page 19: Connecting The Phone
Sourcing Equipment) must meet the IEEE 802.3af specification. For details about the required power supply, see the following table: Model Power Consumption/Supply OpenStage 20 Power Class 1 OpenStage 20 G Power Class 2 OpenStage 40 Power Class 2 OpenStage 40 + 2nd Key Module Power Class 3...
Page 20 inbetriebnahme.fm Startup Assembling and Installing the Phone If applicable, connect the following optional jacks: • LAN connection to PC • Headset (accessory) • Connection to add-on device (accessory) • Connection to external keyboard (accessory) • USB master for connection to a USB device (e. g. accessory USB Acoustic Adapter) To prevent damage on the OpenStage phone, connect an USB stick using the adapter cable C39195-Z7704-A5.
Page 21: Quick Start
inbetriebnahme.fm Startup Quick Start Quick Start This section describes a typical case: the setup of an OpenStage endpoint in an environment using a DHCP server and the web interface. For different scenarios, cross-references to the corresponding section of the administration chapter are given. Alternatively, the DLS (Deployment Service) administration tool can be used.
Page 22: Set The Terminal Number
inbetriebnahme.fm Startup Quick Start Click on the tab „Administrator Pages“. In the dialog box, enter the admin password: The administration main page opens. The left column contains the menu tree. If you click on an item which is printed in normal style, the corresponding dialog opens in the center of the page.
Page 23 inbetriebnahme.fm Startup Quick Start In the left column, select System > System Identity to open the „System Identity“ dialog. Enter the terminal number, i. e. the SIP name / phone number. A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 24: Basic Network Configuration
inbetriebnahme.fm Startup Quick Start 2.3.3 Basic Network Configuration For basic functionality, DHCP must provide the following parameters: • IP Address: IP Address for the phone. • Subnet Mask (option #1): Subnet mask of the phone. • Default Route (option #3 „Router“): IP Address of the default gateway which is used for connections beyond the subnet.
Page 25: Extended Network Configuration
inbetriebnahme.fm Startup Quick Start 2.3.6 Extended Network Configuration To have constant access to network subscribers of other domains, you can enter a total of two more network destinations. For each further domain/subnet you wish to use, IP addresses for the domain and gateway, and a subnet mask must be entered. The option’s name and code are as follows: •...
Page 26: Using A Vendor Class
inbetriebnahme.fm Startup Quick Start 2.3.7.1 Using a Vendor Class It is recommended to define a vendor class on the DHCP server, thus enabling server and phone to exchange vendor-specific data exclusively. The data is disclosed from other clients. In the following, the configuration of vendor classes is explained both for a Windows DHCP Server and for Unix/Linux.
Page 27 inbetriebnahme.fm Startup Quick Start Press Add... to define a new vendor class. Enter „OptiIpPhone“ as Display name and give a description of this class. Provide the class name proper by setting the cursor underneath ASCII and typing „OptiIpPhone“. The binary value is displayed simultaneously. Click OK to apply the changes.
Page 28 inbetriebnahme.fm Startup Quick Start In the DHCP console menu, right-click the DHCP server in question and select Set Pre- defined Options from the context menu. In the dialog, select the previously defined OptiIpPhone class and click on Add... to add a new option.
Page 29 inbetriebnahme.fm Startup Quick Start In the following dialog, specify the option type as follows. (If the workaround for a pre-SP2 Windows 2003 Server has been applied, the option type dialog will be skipped for the first option.) • Name: Free text, e. g. „OptiIpPhone element 01“. •...
Page 30 inbetriebnahme.fm Startup Quick Start 11. If the VLAN is to be provided by DHCP: Repeat step 7 and 8, and then specify the option type as follows. If you want to proceed to the configuration of the DLS address, continue with step 13.
Page 31 inbetriebnahme.fm Startup Quick Start 13. If the DLS address is to be provided by DHCP: Repeat step 7 and 8, and then specify the option type as follows. • Name: Free text, e. g. „OptiIpPhone element 03“. • Data type: „String“. •...
Page 32 inbetriebnahme.fm Startup Quick Start 15. To define a scope, select the DHCP server in question, and then Scope, and right-click Scope Options. Select Configure Options... in the context menu. 16. Select the Advanced tab. Under Vendor class, select the class that you previously de- fined (OptiIpPhone) and, under User class, select Default User Class.
Page 33 inbetriebnahme.fm Startup Quick Start 17. The DHCP console now shows the information that will be transmitted to the corresponding workpoints. Information from the Standard vendor is transmitted to all clients, whereas in- formation from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in this vendor class.
Page 34: Using Option #43 „Vendor Specific
inbetriebnahme.fm Startup Quick Start Setup using a DHCP server on Unix/Linux The following snippet from a DHCP configuration file (usually dhcpd.conf) shows how to set up a configuration using a vendor class and the „vendor-encapsulated-options“ option. class "OptiIpPhone" { option vendor-encapsulated-options # The vendor encapsulated options consist of hexadecimal values for the option number (for instance, 01), the length of the value (for in- stance, 07), and the value (for instance, 53:69:65:6D:65:6E:73).
Page 35 inbetriebnahme.fm Startup Quick Start The following example shows a VLAN ID with the decimal value „10“. Providing Code Length VLAN ID Table 2-3 For manual configuration of the VLAN ID see Section 3.2.2.2, “Manual configuration of a VLAN ID”. The DLS IP address tag consists of the protocol prefix „sdlp://“, the IP address of the DLS serv- er, and the DLS port number, which is „18443“...
Page 36 inbetriebnahme.fm Startup Quick Start Enter tag 1, that is the vendor tag. If the VLAN ID is to be provided by DHCP: Enter the hexadecimal value in Data entry. Pro- viding the length is not required here, as the VLAN ID is always 4 Bytes long. In the exam- ple, the VLAN ID is 10 (Hex: 2A).
Page 37 inbetriebnahme.fm Startup Quick Start If the DLS address is to be provided by DHCP: Enter the DLS address in the Value field, using the following format: <PROTOCOL>:://<IP ADDRESS OF DLS SERVER>:<PORT NUMBER> For ensuring proper functionality, the port number should not be followed by any >...
Page 38 inbetriebnahme.fm Startup Quick Start The DHCP console now shows the information that will be transmitted to the corresponding workpoints. A31003-O1010-M100-3-76A9, 12/09/2007 2-24 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 39: Registering At The Hipath 8000
inbetriebnahme.fm Startup Quick Start 2.3.8 Registering at the HiPath 8000 For registration at the HiPath 8000 SIP server, a SIP user ID and passwort must be provided by the phone. The following procedure describes the configuration using the web interface (see Section 2.3.1, “Access the Web Interface (WBM)”;...
Page 40 inbetriebnahme.fm Startup Quick Start A31003-O1010-M100-3-76A9, 12/09/2007 2-26 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 41: Administration
Press the key repeatedly until the „Settings“ tab is active. (The key toggles between the Settings menu, the Applications menu, and the applications currently running.) OpenStage 20/40: Press the keys , and consecutively to select the administration menu.
Page 42 administration.fm Administration Access via Local Phone Navigate within the Administration Menu OpenStage 60/80 Use the TouchGuide to navigate and execute administrative actions in the administration menu. For using the TouchGuide, see the following figure: Press the key briefly: - scroll up Press the key: - confirm entries...
Page 43 Administration Access via Local Phone OpenStage 20 Use the 3-way Navigator to navigate and execute administrative actions in the administra- tion menu. Press the key briefly: - scroll up Hold down: - scroll to top of list Press the...
Page 44 Toggle between lowercase characters, uppercase characters, and digits. OpenStage 20/40 With the OpenStage 20/40, use the keypad for entering parameters. With the 3 way/5 way- Navigator, you can enter, delete, copy and paste characters and numbers as well as navi- gate within an entry and toggle the input mode.
Page 45: Lan Settings
administration.fm Administration LAN Settings LAN Settings 3.2.1 LAN Port Settings The OpenStage phone provides an integrated switch which connects the LAN, the phone itself and a PC port. By default, the switch will auto negotiate transfer rate (10/100 Mb/s, 1000 Mb/s with OpenStage 60/80 G) and duplex method (full or half duplex) with whatever equipment is connected.
Page 46 administration.fm Administration LAN Settings • PC port autoMDIX: Switches between MDI and MDI-X automatically. Value range: „On“, „Off“. Default: „Off“. Administration via WBM Network > Port configuration Administration via Local Phone --- Administration --- Network --- Port Configuration |--- LAN port type |--- PC port status |--- PC port type --- PC port autoMDIX...
Page 47: Vlan
administration.fm Administration LAN Settings 3.2.2 VLAN VLAN (Virtual Local Area Network) is a technology that allows network administrators to parti- tion one physical network into a set of virtual networks (or broadcast domains). Physically partitioning the LAN into separate VLANs allows a network administrator to build a more robust network infrastructure.
Page 48 administration.fm Administration LAN Settings Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration --- VLAN discovery A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 49: Manual Configuration Of A Vlan Id
administration.fm Administration LAN Settings 3.2.2.2 Manual configuration of a VLAN ID To configure layer 2 VLAN and QoS manually, first make shure that QoS layer 2 and 3 are con- figured as described in Section 3.3.1, “Quality of Service (QoS)”, and VLAN discovery is set to „Manual“...
Page 50: Ip Network Parameters
administration.fm Administration IP Network Parameters IP Network Parameters 3.3.1 Quality of Service (QoS) The QoS technology based on layer 2 and the two QoS technologies Diffserv and TOS/IP Pre- cedence based on layer 3 are allowing the VoIP application to request and receive predictable service levels in terms of data throughput capacity (bandwidth), latency variations (jitter), and delay.
Page 51: Layer 3 / Diffserv
administration.fm Administration IP Network Parameters Administration via WBM Network > QoS Administration via Local Phone --- Administration --- Network --- QoS --- Service |--- Layer 2 |--- Layer 2 voice |--- Layer 2 signalling --- Layer 2 default 3.3.1.2 Layer 3 / Diffserv Diffserv assigns a class of service to an IP packet by adding an entry in the IP header.
Page 52 administration.fm Administration IP Network Parameters Three drop levels Y are reserved for AFXY: AFX1 (low drop probability), AFX2 and AFX3 (High drop probability). In the case of low drop level, packets are buffered over an extended period in the case of high drop level, packets are promptly rejected if they cannot be for- warded.
Page 53: Use Dhcp
administration.fm Administration IP Network Parameters 3.3.2 Use DHCP If this parameter is set to „Yes“, the phone will search for a DHCP server on startup and try to obtain IP data and further configuration parameters from that central server. If no DHCP server is available in the IP network, please deactivate this option. In this case, the IP address, subnet mask and default gateway/route must be defined manually.
Page 54 administration.fm Administration IP Network Parameters Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration --- Use DHCP A31003-O1010-M100-3-76A9, 12/09/2007 3-14 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 55: Ip Address - Manual Configuration
administration.fm Administration IP Network Parameters 3.3.3 IP Address - Manual Configuration If not provided by DHCP dynamically, the phone’s IP address and subnet mask must be spec- ified manually. Data required • IP address: used for addressing the phone. • Subnet mask: subnet mask that is needed for the subnet in use.
Page 56: Default Route/Gateway
administration.fm Administration IP Network Parameters 3.3.4 Default Route/Gateway If not provided by DHCP dynamically (see Section 3.3.2, “Use DHCP”), enter the IP address of the router that links your IP network to other networks. If the value was assigned by DHCP, it can only be read.
Page 57: Specific Ip Routing
administration.fm Administration IP Network Parameters 3.3.5 Specific IP Routing To have constant access to network subscribers of other domains, you can enter a total of two more network destinations, in addition to the default route/gateway. This is useful if the LAN has more than one router or if the LAN is divided into subnets.
Page 58: Dns
administration.fm Administration IP Network Parameters 3.3.6 The main task of the domain name system (DNS) is to translate domain names to IP address- es. For some features and functions of the OpenStage phone, it is necessary to configure the DNS domain the phone belongs to, as well as the nameservers needed for DNS resolving. 3.3.6.1 DNS Domain Name This is the name of the phone’s local domain.
Page 59: Dns Servers
administration.fm Administration IP Network Parameters 3.3.6.2 DNS Servers If not provided by DHCP automatically, a primary and a secondary DNS server can be config- ured. Data required • Primary DNS: IP address of the primary DNS server. • Secondary DNS: IP address of the secondary DNS server. Administration via WBM Network >...
Page 60: Configuration & Update Service (Dls)
administration.fm Administration IP Network Parameters 3.3.7 Configuration & Update Service (DLS) The Deployment Service (DLS) is a HiPath Management application for administering work- points in both HiPath and non-HiPath networks. Amongst the most important features are: se- curity (e.g. PSS generation and distribution within an SRTP security domain), mobility for opti- Point and OpenStage SIP phones, software deployment, plug&play support, as well as error and activity logging.
Page 61: Snmp
administration.fm Administration IP Network Parameters Administration via Local Phone --- Administration --- Network --- Update Service (DLS) |--- DLS address |--- DLS port |--- Contact gap --- Security status 3.3.8 SNMP The Simple Network Management Protocol is used by network management systems for mon- itoring network-attached devices for conditions that warrant administrative attention.
Page 62 administration.fm Administration IP Network Parameters Data required • Trap sending enabled: Enables or disables the sending of a TRAP message to the SNMP manager. Value range: „Yes“, „No“. Default: „No“. • Trap destination: IP address or hostname of the SNMP manager that receives traps. •...
Page 63 administration.fm Administration IP Network Parameters Administration via WBM System > SNMP Administration via Local Phone --- Administration --- System --- SNMP |--- Trap sending enabled |--- Trap destination |--- Trap destination port |--- Trap community |--- Diag sending enabled |--- Diag destination |--- Diag destination port |--- Diag community |--- QoS traps to QCU...
Page 64: System Settings
administration.fm Administration System Settings System Settings 3.4.1 Terminal and User Identity 3.4.1.1 Terminal Identity Within a SIP environment, both Terminal Number and Terminal Name may serve as a phone number. The values are used in the userinfo part of SIP URIs. In order to register with a SIP registrar, the phone sends REGISTER messages to the registrar containing the contents of Terminal number Data required...
Page 65: Display Identity
administration.fm Administration System Settings 3.4.1.2 Display Identity If an individual name oder number is entered as Display identity, and Enable ID is activated, it is displayed in the phone’s status bar instead of the Terminal number or Terminal name. Administration via WBM System >...
Page 66: Emergency And Voice Mail
administration.fm Administration System Settings 3.4.2 Emergency and Voice Mail It is important that an Emergency number is configured. If a mailbox located at a remote serv- er shall be used, its Voice mail number must be entered. Administration via WBM System >...
Page 67: Date And Time
administration.fm Administration System Settings 3.4.3 Date and Time If the DHCP server in your network provides information about the SNTP server access, the correct date and time is automatically shown on the phone. If the DHCP server in your network does not provide an SNTP address, you have to set the SNTP address manually.
Page 68: No Sntp Server Available
administration.fm Administration System Settings 3.4.3.2 No SNTP server available If no SNTP server is available, date and time must be set manually. The manual setting of Time and Date is located in the user menu, not in the > administrator menu. Data required •...
Page 69: Response Timer
administration.fm Administration System Settings 3.4.3.3 Response Timer The Response timer is started whenever the phone sends a new message to the SIP server. If the timer expires before the phone gets a response from the SIP server, the phone assumes that the server had died and then attempts to contact the backup server, if configured.
Page 70: Outbound Proxy
administration.fm Administration System Settings 3.4.3.4 Outbound Proxy If this option set to „Yes“, the phone routes outbond requests to the configured proxy, i. e. the SIP server/registrar. The outbound proxy will fulfill the task of resolving the domain contained in the SIP request. If „No“ is set, the phone will attempt to resolve the domain by itself. If a Default OBP (Outbound Proxy) domain is set and the number or name dialed by the user does not provide a domain, this value will be appended to the name or number.
Page 71: Sip Transport Protocol
administration.fm Administration System Settings 3.4.3.5 SIP Transport Protocol Selects the transport protocol to be used for SIP messages. The values „UDP“, „TCP“, and „TLS“ are available. The default is „UDP“. Administration via WBM System > SIP interface Administration via Local Phone --- Administration --- System --- SIP Interface...
Page 72: Sip Addresses And Ports
administration.fm Administration System Settings 3.4.4 SIP Addresses and Ports 3.4.4.1 SIP Addresses In this group of parameters, the IP addresses or host names for the SIP server, the SIP regis- trar, and the SIP gateway are defined. SIP server address provides the IP address or host name of the SIP proxy server (Hipath 8000).
Page 73: Sip Ports
administration.fm Administration System Settings Administration via Local Phone --- Administration --- System --- Registration --- SIP Addresses |--- SIP server |--- SIP registrar --- SIP gateway 3.4.4.2 SIP Ports In this group of parameters, the ports for the SIP server, the SIP registrar, and the SIP gateway are defined (for further information see Section 3.4.4.1, “SIP Addresses”), as well as the SIP port used by the phone (SIP local).
Page 74: Sip Registration
administration.fm Administration System Settings Administration via Local Phone --- Administration --- Network --- Port Configuration |--- SIP server |--- SIP registrar |--- SIP gateway --- SIP local 3.4.5 SIP Registration Registration is the process by which centralized SIP Server/Registrars become aware of the existence and readiness of an endpoint to make and receive calls.
Page 75 administration.fm Administration System Settings Data required • Registration timer (seconds): Expiry time of the registration in seconds. Default value: 3600. • Server type: Type of server the phone will register to. Value range: „Other“, „HiQ8000“. Default value: „HiQ8000“. • Realm: Protection domain for authentication. •...
Page 76: Sip Session Timer
administration.fm Administration System Settings 3.4.6 SIP Session Timer Session timers provide a basic keep-alive mechanism between 2 user agents or phones. This mechanism can be useful to the endpoints concerned or for stateful proxies to determine that a session is still alive. This is achieved by the phone sending periodic re-INVITEs to keep the session alive.
Page 77 administration.fm Administration System Settings Administration via WBM System > Registration Administration via Local Phone --- Administration --- System --- Registration --- SIP session |--- Session timer --- Session duration A31003-O1010-M100-3-76A9, 12/09/2007 3-37 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 78: Sip Survivability
administration.fm Administration System Settings 3.4.7 SIP Survivability The survivability feature will allow the SIP User Agent to register with a backup SIP proxy which will be used to make and receive calls when the primary SIP proxy fails or is not reachable due to a network failure.
Page 79 administration.fm Administration System Settings Administration via WBM System > Registration Network > Port configuration A31003-O1010-M100-3-76A9, 12/09/2007 3-39 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 80 administration.fm Administration System Settings Administration via Local Phone --- Administration --- System --- Registration --- SIP Session --- SIP Survivability |--- Backup registration flag |--- Backup proxy address |--- Backup transport --- OBP flag --- Administration --- Network --- Port Configuration --- Backup proxy A31003-O1010-M100-3-76A9, 12/09/2007 3-40...
Page 81: Features - Configuration
administration.fm Administration Features - Configuration Features - Configuration 3.5.1 Allow Refuse This parameter defines whether the Refuse Call feature is available on the phone. The possible values are „Yes“ or „No“. The default is „Yes“. Administration via WBM System > Features > Configuration Administration via Local Phone --- Administration --- System...
Page 82: Group Pickup
administration.fm Administration Features - Configuration 3.5.2 Group Pickup 3.5.2.1 Feature Code This feature allows a user to collect a call from any ringing phone that is in the same pickup group. To be a member of a Call Pickup group, the phone must be configured with the corre- sponding URI of the Call Pickup group service provided by the server.
Page 83: Pickup Alert (V1R3.X Only)
administration.fm Administration Features - Configuration 3.5.2.2 Pickup alert (V1R3.x only) If desired, an incoming call for the pickup group can be indicated acoustically. The Group pickup tone allowed parameter activates or deactivates the generation of an alert tone for incoming pickup group calls. By default, it is set to „Yes“. If this is activated, Group pick- up as ringer determines whether the current ringtone or an alert beep is used.
Page 84: Transfer On Hangup
administration.fm Administration Features - Configuration 3.5.3.2 Transfer on Hangup This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled, and A goes on-hook, B gets connected to C.
Page 85: Callback Uris
administration.fm Administration Features - Configuration 3.5.4 Callback URIs The Callback option allows the user to request a callback on certain conditions. The callback request is sent to the SIP server. The Code for callback busy requests a callback if the line is busy, i.
Page 86: Message Waiting Address
administration.fm Administration Features - Configuration 3.5.5 Message Waiting Address The MWI (Message Waiting Indicator) is an optical signal which indicates that voicemail mes- sages are on the server. Depending on the SIP server / gateway in use, the Message waiting server address, that is the address or host name of the server that sends message waiting notifications to the phone, must be configured.
Page 87: System Based Conference
administration.fm Administration Features - Configuration 3.5.6 System Based Conference The Conference URI provides the number/URI used for system based conferences. This fea- ture is not available with every system. It is recommended not to enter the full URI, but only the user part. For instance, enter >...
Page 88: Uacsta Interface
administration.fm Administration Features - Configuration 3.5.8 uaCSTA Interface uaCSTA is a limited subset of the CSTA protocol, which allows external CTI applications to in- teract with the phone. If Allow uaCSTA is enabled, applications which support the uaCSTA standard have access to the OpenStage phone.
Page 89: Not Used Timeout
administration.fm Administration Features - Configuration 3.5.9 Not Used Timeout This parameter sets the timeout for the local user and admin menu in minutes. When the time interval is over, the menu is closed and the administrator/user is logged out. The timeout may be helpful in case a user does a long press on a line key unintentionally, and thereby invokes the key configuration menu.
Page 90: Multiline Appearance/Keyset
administration.fm Administration Multiline Appearance/Keyset Multiline Appearance/Keyset This feature is available only on OpenStage 40 and OpenStage 60/80 phones. > A phone that has more than one line associated to it, and therefore works as a multiline phone, is referred to as „keyset“. The lines are assigned to the phone by setting up a separate line key for each line.
Page 91 administration.fm Administration Multiline Appearance/Keyset For the configuration of line keys, the use of the DLS (Deployment Service) is recom- > mended. For operating the DLS, please refer to the DLS user’s guide. Alternatively, the web interface or the local menu can be used. Note that the creation of a new line key and the configuration of some parameters can not be accomplished by the pho- ne’s local menu.
Page 92 administration.fm Administration Multiline Appearance/Keyset • Allow in Overview: Determines whether the line appears in the phone’s line overview. Value range: „Yes“, „No“. Default: „Yes“. A new line key can only be added by use of the WBM or, preferably, the DLS. Once >...
Page 93 administration.fm Administration Multiline Appearance/Keyset Administration via Local Phone The configuration of a line via Local phone is only possible when the line key has been created via Web interface or DLS before. --- Administration --- System --- Features --- Configuration --- Keyset Lines --- Details For Keyset Line <xx>...
Page 94: Configure Keyset Operation
administration.fm Administration Multiline Appearance/Keyset 3.6.2 Configure Keyset Operation The following parameters provide general settings which are common for all keyset lines. The Rollover ring setting will be used if the keyset is currently active in a call when an incoming call arrives on a different line.
Page 95 administration.fm Administration Multiline Appearance/Keyset • „none“: To answer a call, the user manually selects a line by pressing its line key before going off-hook, or by pressing the speaker key. Manual line selection overrides auto- matic line preferences. Line action mode determines the consequence for an established connection when the line key is pressed.
Page 96 administration.fm Administration Multiline Appearance/Keyset • Line action mode: Determines the consequence for an established connection when the line key is pressed. Value range: „Hold“, „Release“. Default: „Hold“. • Show focus: Determines whether the line Key LED blinks or is steady when it is in use. Value range: „Yes“, „No“.
Page 97 administration.fm Administration Multiline Appearance/Keyset Administration via WBM System > Features > Keyset Operation Administration via Local Phone --- Administration --- System --- Features --- Keyset operation |--- Rollover ring |--- LED on registration |--- Originating line preference |--- Terminating line preference |--- Line action mode |--- Show focus |--- Reservation timer...
Page 98: Direct Station Select (Dss)
administration.fm Administration Multiline Appearance/Keyset 3.6.3 Direct Station Select (DSS) This feature is available only on OpenStage 40/60/80, and requires HiPath V 3.0. > A DSS key is a special variant of a line key. It enables a direct connection to a target phone, allowing the user to pick up or forward a call alerting the DSS target and make/complete a call to the DSS target.
Page 99: Settings For A Dss Key
administration.fm Administration Multiline Appearance/Keyset Administration via Local Phone --- Administration --- System --- Features --- Feature Access --- Call establish |--- Deflect to DSS --- Refuse DSS pickup --- Administration --- System --- Features --- Configuration --- General --- DSS Pickup timer 3.6.3.2 Settings for a DSS key The Key label <n>...
Page 100 administration.fm Administration Multiline Appearance/Keyset • User ID: SIP user ID of the DSS destination. • Password: Password corresponding to the SIP user ID. • Outgoing calls: Determines whether forwarding and DND at the target phone will be over- ridden on a DSS call. Value range: „Normal“, „Direct“.
Page 101: Key Modules
administration.fm Administration Multiline Appearance/Keyset 3.6.4 Key Modules A Key module provides 12 additional program keys. It is available for the OpenStage 40, 60 and 80. A maximum of 2 key modules can be connected to one phone. The configuration of a key on the key module is just the same as the configuration of a phone key.
Page 102: Dialing
administration.fm Administration Dialing Dialing 3.7.1 Canonical Dialing Settings Call numbers taken from a directory application, LDAP for instance, are mostly expressed in canonical format. Moreover, call numbers entered into the local phone book are automatically converted and stored in canonical format, thereby adding „+“, Local country code, Local na- tional code, and Local enterprise number as prefixes.
Page 103 administration.fm Administration Dialing • Initial extension digits / Initial digits: List of initial digits of all possible extensions in the local enterprise network. If, for instance, the extensions 3000-5999 are configured in the HiPath 8000, each number will start with 3, 4, or 5. Therefore, the digits to be entered are 3, 4, 5.
Page 104 administration.fm Administration Dialing • International gateway code: • „Use national code“: Defaultvalue. All international formatted numbers will be dialled explicitly by using the access code for the international gateway to replace the „+“ pre- fix. • „Leave as +“: All international formatted numbers will be prefixed with „+“. Administration via WBM Locality >...
Page 105 administration.fm Administration Dialing Administration via Local Phone --- Administration --- Local Functions --- Locality --- Canonical dial settings |--- Local country code |--- National prefix digit |--- Local national code |--- Minimum local number length |--- Local enterprise node |--- PSTN access code |--- International access code |--- Operator code |--- Emergency number...
Page 106: Canonical Dial Lookup
administration.fm Administration Dialing 3.7.2 Canonical Dial Lookup The parameters given here are important for establishing outgoing calls and for recognizing in- coming calls. In the local phonebook, and, mostly, in LDAP directories, numbers are stored in canonical for- mat. In order to generate an appropriate dial string according to the settings in Internal num- bers and External numbers (->...
Page 107 administration.fm Administration Dialing Administration via Local Phone --- Administration --- Local Functions --- Locality --- Canonical Dial Lookup |--- Local code 1 |--- International code 1 |--- Local code 2 |--- International code 2 |--- Local code 3 |--- International code 3 |--- Local code 4 |--- International code 4 |--- Local code 5...
Page 108: Mobility
administration.fm Administration Mobility Mobility The Mobility feature requires a DLS server. If the phone is mobility enabled by the DLS, a mo- bile user can log on to the phone and thereby have his own user settings transferred to the phone.
Page 109: Transferring Phone Software, Application And Media Files
Service) or WBM (Web Based Management). For all user data, which includes files as well as phonebook content, the following > amounts of storage place are available: • OpenStage 20/40: 4MB • OpenStage 60/80: 8MB 3.9.1 FTP/HTTPS Server There are no specific requirements regarding the FTP server for transferring files to the Open- Stage phone.
Page 110 administration.fm Administration Transferring Phone Software, Application and Media Files Administration via WBM File transfer > Defaults Administration via Local Phone --- Administration --- File Transfer --- Defaults |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path --- HTTPS base URL A31003-O1010-M100-3-76A9, 12/09/2007...
Page 111: Phone Software
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.3 Phone Software The firmware for the phone can be updated by downloading a new software file to the phone. Do not disconnect the phone from the LAN or power unit during software update. An active update process is indicated by blinking LEDs and/or in the display.
Page 112 administration.fm Administration Transferring Phone Software, Application and Media Files Administration via WBM File transfer > Phone application Administration via Local Phone --- Administration --- File Transfer --- Phone app |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path...
Page 113: Download/Update Phone Software
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.3.2 Download/Update Phone Software If applicable, phone software should be deployed using the Deployment Service (DLS). Alter- natively, the download can be triggered from the web interface or from the Local phone menu. When the download has been successful, the phone will restart and boot up using the new soft- ware.
Page 114: Music On Hold
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.4 Music on Hold If enabled by the user, the Music on Hold (MoH) sound file is played when a call is put on hold. The following formats for Music on Hold are supported: •...
Page 115 administration.fm Administration Transferring Phone Software, Application and Media Files Administration via WBM File transfer > Hold music Administration via Local Phone --- Administration --- File Transfer --- Hold Music |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path...
Page 116: Download Music On Hold
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.4.2 Download Music on Hold If applicable, Music on Hold should be deployed using the Deployment Service (DLS). Alterna- tively, the download can be triggered from the web interface or from the local phone menu. Start Download via WBM In the File transfer >...
Page 117: Picture Clips
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.5 Picture Clips Picture clips are available only on OpenStage 60/80 phones. > Picture Clips are small images used for displaying a picture of a person that is calling on a line. The supported file formats for picture clips are JPEG and PNG (recommended).
Page 118 administration.fm Administration Transferring Phone Software, Application and Media Files Administration via WBM File transfer > Picture clip Administration via Local Phone --- Administration --- File Transfer --- Picture Clip |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path...
Page 119: Download Picture Clip
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.5.2 Download Picture Clip If applicable, picture clips should be deployed using the Deployment Service (DLS). Alterna- tively, the download can be triggered from the web interface or from the local phone menu. Start Download via WBM In the File transfer >...
Page 120: Ldap Template
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.6 LDAP Template LDAP is available only on OpenStage 60/80 phones. > The LDAP template is an ASCII text file that uses an allocation list to assign directory server attributes to input and output fields on an LDAP client. The LDAP template must be modified correctly for successful communication between the directory server and the LDAP client.
Page 121 administration.fm Administration Transferring Phone Software, Application and Media Files Administration via WBM File transfer > LDAP Administration via Local Phone --- Administration --- File Transfer --- LDAP |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL...
Page 122: Download Ldap Template
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.6.2 Download LDAP Template If applicable, LDAP templates should be deployed using the Deployment Service (DLS). Alter- natively, the download can be triggered from the web interface or from the local phone menu. The OpenStage phone supports LDAPv3.
Page 123: Logo
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.7 Logo The logo is a background image for the telephony interface. Logos are available only on OpenStage 40/60/80 phones. > The supported file formats are JPEG and PNG. The ideal size and resolution values are is as follows: OpenStage 60: •...
Page 124 administration.fm Administration Transferring Phone Software, Application and Media Files • FTP username: User name for accessing the server. • FTP password: Password corresponding to the user name. • FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to „HTTPS“.
Page 125: Download Logo
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.7.2 Download Logo If applicable, logos should be deployed using the Deployment Service (DLS). Alternatively, the download can be triggered from the web interface or from the local phone menu. Start Download via WBM In the File transfer >...
Page 126: Screensaver
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.8 Screensaver The screensaver is displayed when the phone is in idle mode. It performs a slide show consist- ing of images which can be uploaded using the web interface. Screensavers are available only on OpenStage 60/80 phones. >...
Page 127 administration.fm Administration Transferring Phone Software, Application and Media Files Administration via WBM File transfer > Screensaver Administration via Local Phone --- Administration --- File Transfer --- Screensaver |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL...
Page 128: Download Screensaver
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.8.2 Download Screensaver If applicable, screensavers should be deployed using the Deployment Service (DLS). Alterna- tively, the download can be triggered from the web interface or from the local phone menu. Start Download via WBM In the File transfer >...
Page 129: Ringer File
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.9 Ringer File Custom Ringtones can be uploaded to the phone. The following file formats are supported: • WAV format. The recommended specifications are: • Audio format: PCM • Bitrate: 16 kB/sec •...
Page 130 administration.fm Administration Transferring Phone Software, Application and Media Files Data required (if not derived from Defaults) • Download method: Selects the protocol to be used. Value range: „FTP“, „HTTPS“. Default: „FTP“. • Server address: IP address or hostname of the FTP/HTTPS server in use. •...
Page 131: Download Ringer File
administration.fm Administration Transferring Phone Software, Application and Media Files 3.9.9.2 Download Ringer File If applicable, ringtone files should be deployed using the Deployment Service (DLS). Alterna- tively, the download can be triggered from the web interface or from the local phone menu. Start Download via WBM In the File transfer >...
Page 132: Directory Settings
administration.fm Administration Directory Settings 3.10 Directory Settings 3.10.1 LDAP LDAP is available only on OpenStage 60/80 phones. > The Lightweight Directory Access Protocol enables access to a directory server via an LDAP client. Various personal information is stored there, e.g. the name, organisation and contact data of persons working in an organisation.
Page 133 administration.fm Administration Directory Settings Administration via WBM Local Functions > Directory settings Administration via Local Phone --- Administration --- Local Functions --- Directory Settings |--- LDAP server address |--- LDAP server port |--- LDAP authentication |--- LDAP user name --- LDAP password A31003-O1010-M100-3-76A9, 12/09/2007 3-93 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 134: Speech
administration.fm Administration Speech 3.11 Speech 3.11.1 RTP Base Port This parameter sets the port to be used for speech data, which is transmitted by RTP (Real- Time Transport Protocol). The default port number is 5010. Administration via WBM Network > Port Configuration Administration via Local Phone --- Administration --- Network...
Page 135: Codec Preferences
administration.fm Administration Speech 3.11.2 Codec Preferences If Silence suppression is activated, the transmission of data packets is suppressed on no con- versation, that is, if the user doesn’t speak. The OpenStage phone provides the codecs G.711, G.722, and G.729. When a SIP connection is established between two endpoints, the phones negotiate the codec to be used.
Page 136 administration.fm Administration Speech Administration via Local Phone --- Administration --- Speech --- Codec Preferences |--- Silence suppression |--- Packet size |--- G.711 |--- G.729 --- G.722 A31003-O1010-M100-3-76A9, 12/09/2007 3-96 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 137: Audio Settings
administration.fm Administration Speech 3.11.3 Audio Settings The usage of microphone and speaker for speakerphone mode can be controlled by the ad- ministrator. Both microphone and loudspeaker can be switched on or off separately. By default, both micro- phone and loudspeaker are switched on. Administration via WBM Speech >...
Page 138: Applications
administration.fm Administration Applications 3.12 Applications 3.12.1 XML Applications (V1R3.x only) The XML application interface is available for the OpenStage 60/80 phones running > V1R3.x software. 3.12.1.1 Basic Configuration The XML interface enables server-based applications with a set of GUI elements. The techno- logies commonly used in web applications can be used: Java Servlets, JSP, PHP, CGI etc., de- livered by servers such as Tomcat, Apache, Microsoft IIS.
Page 139 administration.fm Administration Applications Data required • Display name: Program name to be displayed on the phone. Value specifications: • It must be unique on the phone. • It cannot contain the ’^’ character. • It cannot not be empty. • Its length cannot not exceed 20 characters.
Page 140 administration.fm Administration Applications Administration via Local Phone --- Administration --- Applications --- XML |--- Add application |--- Display name |--- Application name |--- Server address |--- Server port |--- Protocol |--- Program name |--- XML trace enabled --- Debug program name --- Add Xpressions |--- Display name |--- Application name...
Page 141: Http Proxy
administration.fm Administration Applications 3.12.1.2 HTTP Proxy The HTTP data transfer between the phone and the server on which the remote program is run- ning can be handled be an HTTP proxy, if desired. First, the proxy itself must be configured. Enter the IP address of the proxy it in the Network > IP configuration >...
Page 142: Password
administration.fm Administration Password 3.13 Password The passwords for user and administrator can be set here. They have to be confirmed after en- tering. The factory setting is „123456“; it should be changed after the first login. Administration via WBM Authentication > Change Admin password Authentication >...
Page 143: Troubleshooting: Lost Password
administration.fm Administration Troubleshooting: Lost Password 3.14 Troubleshooting: Lost Password If the administration and/or user password is lost, and there is no DLS available, new passwords must be provided. For this purpose, a factory reset is necessary. Take the following steps to initiate a factory reset: On the phone, press the key to activate the administration menu (the...
Page 144: Factory Reset
administration.fm Administration Factory Reset 3.15 Factory Reset This function resets all parameters to their factory settings. A special reset password is required for this operation: „124816“. Administration via WBM Maintenance > Factory reset Administration via Local Phone --- Administration --- Maintenance --- Factory reset A31003-O1010-M100-3-76A9, 12/09/2007 3-104...
Page 145: Diagnostics
administration.fm Administration Diagnostics 3.16 Diagnostics 3.16.1 Display General Phone Information General information about the status of the phone can be displayed if desired. Displayed Data • MAC address: Shows the phone’s MAC address. • Software version: Displays the version of the phone’s firmware. •...
Page 146: Lan Monitoring
administration.fm Administration Diagnostics 3.16.2 LAN Monitoring The LAN port mirror facility allows for monitoring all network traffic at the phone’s LAN port. For further information, see Section 3.2.1, “LAN Port Settings”. Additionally, there is a possibility to monitor LAN traffic and port settings in the Local user menu: --- User --- Network information |--- IP address...
Page 147: Ip Tests
administration.fm Administration Diagnostics 3.16.3 IP Tests For network diagnostics, the OpenStage phone can ping any host or network device to deter- mine whether it is reachable. Additionally, the IP route to a host or network device can be traced using the traceroute tool contained in the phone software. The Pre Defined Ping tests provide pinging for a pre-defined selection of servers: DLS, SIP server, and SIP registrar.
Page 148: Process And Memory Information
administration.fm Administration Diagnostics 3.16.4 Process and Memory Information The processes currently running on the phone’s operating system as well as their CPU and memory usage can be monitored here. 100 processes are displayed on the web page. For fur- ther information, please refer to the documentation of the "top" command for Unix/Linux sys- tems.
Page 149: Fault Trace Configuration
administration.fm Administration Diagnostics 3.16.5 Fault Trace Configuration Error tracing and logging can be configured separately for all components, i. e. the services and applications running on the OpenStage phone. The resulting files can be downloaded via the WBM. The File size (bytes) parameter sets the maximum file size. When the maximum size is reached, the file is deleted, and a new trace file is generated.
Page 150 Involved in the passing of call related information and signaling to and from the CSTA ser- vice. • Component registrar Handles data relating to the type of phone, e.g. OpenStage 20/40 HFA/SIP, OpenStage 60/ 80 HFA/SIP. • Data Access service Allows other services to access the data held within the phone database.
Page 151 administration.fm Administration Diagnostics Used by the Husim phone tester to exchange data with the phone for remote control, test- ing and monitoring purposes. • Java Any Java applications running on the phone will be run in the Java sandbox controlled by the Java service.
Page 152 administration.fm Administration Diagnostics Involved in the creation and parsing of SIP messages. This service communicates directly with the SIP stack. • Service framework This is the environment within which other phone services operate. It is involved in the starting and stopping of services. •...
Page 153 administration.fm Administration Diagnostics Administration via WBM Diagnostics > Fault Trace Configuration A31003-O1010-M100-3-76A9, 12/09/2007 3-113 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 154: Easy Trace Profiles
administration.fm Administration Diagnostics 3.16.6 Easy Trace Profiles In order to simplify tracing for a specific problem, the tracing levels can be adjusted using pre- defined settings. The Easy Trace profiles provide settings for a specific area, e. g. call connec- tion.
Page 155: Call Log Issues
administration.fm Administration Diagnostics 3.16.6.3 Call Log Issues Administration via WBM Easy Trace Profiles > Call log issues 3.16.6.4 LDAP Phonebook Administration via WBM Easy Trace Profiles > Phonebook application issues - central LDAP phonebook 3.16.6.5 DAS Connection Administration via WBM Easy Trace Profiles >...
Page 156: Dot1X
administration.fm Administration Diagnostics Easy Trace Profiles > DLS data errors 3.16.6.7 Dot1x Administration via WBM Easy Trace Profiles > Dot1x 3.16.6.8 Help Application Issues Administration via WBM Easy Trace Profiles > Help application issues 3.16.6.9 Sidecar Issues Administration via WBM Easy Trace Profiles >...
Page 157: Key Input
administration.fm Administration Diagnostics 3.16.6.10 Key Input Administration via WBM Easy Trace Profiles > Key input problems 3.16.6.11 LAN Connectivity Administration via WBM Easy Trace Profiles > LAN connectivity 3.16.6.12 Local Phonebook Administration via WBM Easy Trace Profiles > Phonebook application issues - Local phonebook A31003-O1010-M100-3-76A9, 12/09/2007 3-117 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 158: Messaging
administration.fm Administration Diagnostics 3.16.6.13 Messaging Administration via WBM Easy Trace Profiles > Messaging application issues 3.16.6.14 Speech Administration via WBM Easy Trace Profiles > Speech 3.16.6.15 Tone Administration via WBM Easy Trace Profiles > Tone issues A31003-O1010-M100-3-76A9, 12/09/2007 3-118 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 159: Usb Backup/Restore
administration.fm Administration Diagnostics 3.16.6.16 USB Backup/Restore Administration via WBM Easy Trace Profiles > USB Backup/Restore 3.16.6.17 Voice Dialling Administration via WBM Easy Trace Profiles > Voice Dialling 3.16.6.18 Web Based Management Administration via WBM Easy Trace Profiles > EasyTrace: WebM A31003-O1010-M100-3-76A9, 12/09/2007 3-119 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 160: Common Levels For All Parameters
administration.fm Administration Diagnostics 3.16.6.19 Common Levels for All Parameters With special EasyTrace profiles, all tracing parameters can be set to one tracing level at once. These profiles are named after their functions: • EasyTrace: All OFF • EasyTrace: All FATAL •...
Page 161: Qos Reports
administration.fm Administration Diagnostics 3.16.7 QoS Reports 3.16.7.1 Conditions and Thresholds for Report Generation For details about the functionality, please refer to the release notes. > The generation of QoS (Quality of Service) reports which are sent to a QCU server (see Sec- tion 3.3.8, “SNMP”) is configured here.
Page 162 administration.fm Administration Diagnostics Non-compressing codecs / Compressing codes: • Lost packets (per 1000 packets): When the number of lost packets exceeds this maxi- mum value during the observation interval, a report is created. Default: 10. • Consecutive lost packets: When the number of lost packets following one another ex- ceeds this maximum value during the observation interval, a report is created.
Page 163 administration.fm Administration Diagnostics Administration via Local Phone --- Administration --- Network --- QoS --- Reports |--- Generation |--- Mode |--- Report interval |--- Observe interval --- Minimum session length |--- Send now --- Thresholds |--- Maximum jitter |--- Round-trip delay |--- Non-compressing: |--- ...Lost packets (K) |--- ...Lost consecutive...
Page 164: View Report
administration.fm Administration Diagnostics 3.16.7.2 View Report OpenStage phones generate QoS reports using a HiPath specific format, QDC (QoS Data Col- lection). The reports created for the last 6 sessions, i. e. conversations, can be viewed on the WBM. To enable the generation of reports, please ensure that: •...
Page 165 administration.fm Administration Diagnostics • Silence suppression: Number of silence suppression activation objects found in the RTP stream received. A silence suppression activation object is defined as a period of silence when no encoded voice signals were transmitted by the sender. •...
Page 166 administration.fm Administration Diagnostics • maximum jitter; • lost packets; • consecutive lost packets; • consecutive good packets. • HiPath Switch ID: Unique number identifying the HiPath switch to which the endpoints are assigned. • LTU number: In HiPath 4000 only, the shelf identification is taken from the shelf containing a gateway.
Page 167 administration.fm Administration Diagnostics Data viewing via WBM: Diagnostics > QoS reports > View Session Data A31003-O1010-M100-3-76A9, 12/09/2007 3-127 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 168: Core Dump
administration.fm Administration Diagnostics 3.16.8 Core dump If Enable core dump is checked, a core dump will be initiated in case of a severe error. The core dump will be saved to a file. By default, this function is activated. When File size unlimited is checked, there is no size limit for the core dump file. By default, it is not checked.
Page 169: Bluetooth
administration.fm Administration Bluetooth 3.17 Bluetooth The Bluetooth interface can be enabled or disabled here. By default, it is enabled. Bluetooth is available only on OpenStage 60/80 phones. > Administration via WBM Administration via Local Phone --- Administration --- Bluetooth --- Enable A31003-O1010-M100-3-76A9, 12/09/2007 3-129 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 170 administration.fm Administration Bluetooth A31003-O1010-M100-3-76A9, 12/09/2007 3-130 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 171: Examples And Howtos
beispiele.fm Examples and HowTos Canonical Dialing Examples and HowTos Canonical Dialing 4.1.1 Canonical Dialing Settings The following example shows settings suitable for the conversion of given dial strings to canon- ical format. Parameter Example value Explanation Local country code International country code for the UK. National prefix digit Used in front of national codes when dialled without international prefix.
Page 172: Canonical Dial Lookup
beispiele.fm Examples and HowTos Canonical Dialing 4.1.2 Canonical Dial Lookup The following example shows settings suitable for recognizing incoming numbers and assign- ing them to entries in the local phone book. Parameter Example value Explanation Local code <1> Enterprise node prefix (here: Nottingham). International code <1>...
Page 173: How To Create Logo Files For Openstage 60/80 Phones
beispiele.fm Examples and HowTos How to create logo files for OpenStage 60/80 phones How to create logo files for OpenStage 60/80 phones This HowTo describes the creation of a logo file in PNG format suitable for OpenStage 60/80 phones. Because of performance issues half transparency in the alpha channel of the png >...
Page 174 beispiele.fm Examples and HowTos How to create logo files for OpenStage 60/80 phones Create a New Image Create an image with the size and resolution according to the phone type: Phone Type Size (px) Resolution (dpi) OpenStage 60 240 x 70 70,55 OpenStage 80 480 x 142...
Page 175 beispiele.fm Examples and HowTos How to create logo files for OpenStage 60/80 phones Save the image Finally, save the image in PNG format. A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 176 beispiele.fm Examples and HowTos How to create logo files for OpenStage 60/80 phones A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 177: Technical Reference
referenz.fm Technical Reference Menus Technical Reference Menus This section describes the structure of the administration menus of the OpenStage > phone. For information on user menus, please refer to the user manual. 5.1.1 Web Interface Menu 5.1.1.1 Menu Structure Admin Login Bluetooth Network IP configuration...
Page 178 referenz.fm Technical Reference Menus File transfer Defaults Phone application Hold music Picture Clip LDAP Logo Screensaver Ringer file Ringer file Local functions Directory settings Locality Canonical dial settings Canonical dial lookup Date and time Speech Codec preferences Audio settings General information Authentication Change Admin password Change User password...
Page 179 referenz.fm Technical Reference Menus Phonebook application issues - Local phonebook Messaging application issues Speech Tone issues USB Backup/Restore Voice Dialling EasyTrace: WebM EasyTrace: All FATAL EasyTrace: All ERROR EasyTrace: All WARNING EasyTrace: All LOG EasyTrace: All TRACE EasyTrace: All DEBUG QoS Reports Generation View Session Data...
Page 180: Web
referenz.fm Technical Reference Menus 5.1.1.2 Web Pages Admin Login Bluetooth IP configuration A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 181 referenz.fm Technical Reference Menus IP configuration (V1R3.x) Update Service (DLS) A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 182 referenz.fm Technical Reference Menus Port configuration Port configuration (V1R3.x) System Identity A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 183 referenz.fm Technical Reference Menus SIP interface Registration A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 184 referenz.fm Technical Reference Menus SNMP Configuration DSS settings A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 185 referenz.fm Technical Reference Menus Program keys Line A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 186 referenz.fm Technical Reference Menus Key Module 1 Key Module 2 A31003-O1010-M100-3-76A9, 12/09/2007 5-10 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 187 referenz.fm Technical Reference Menus Keyset operation Services Defaults A31003-O1010-M100-3-76A9, 12/09/2007 5-11 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 188 referenz.fm Technical Reference Menus Phone application Hold music Picture Clip A31003-O1010-M100-3-76A9, 12/09/2007 5-12 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 189 referenz.fm Technical Reference Menus LDAP Logo Screensaver A31003-O1010-M100-3-76A9, 12/09/2007 5-13 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 190 referenz.fm Technical Reference Menus Ringer file Directory settings Canonical dial settings A31003-O1010-M100-3-76A9, 12/09/2007 5-14 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 191 referenz.fm Technical Reference Menus Canonical dial lookup Date and time Codec preferences Audio settings General information A31003-O1010-M100-3-76A9, 12/09/2007 5-15 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 192 referenz.fm Technical Reference Menus Change Admin password Change User password Fault trace configuration A31003-O1010-M100-3-76A9, 12/09/2007 5-16 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 193 referenz.fm Technical Reference Menus Bluetooth HeadSetProfile Call connection Call log issues Phonebook application issues - central LDAP phonebook A31003-O1010-M100-3-76A9, 12/09/2007 5-17 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 194 referenz.fm Technical Reference Menus DAS connection DLS data errors Dot1x Help application issues Issues with the sidecars A31003-O1010-M100-3-76A9, 12/09/2007 5-18 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 195 referenz.fm Technical Reference Menus Key input problems LAN connectivity Phonebook application issues - Local phonebook Messaging application issues A31003-O1010-M100-3-76A9, 12/09/2007 5-19 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 196 referenz.fm Technical Reference Menus Speech Tone issues USB Backup/Restore Voice Dialling A31003-O1010-M100-3-76A9, 12/09/2007 5-20 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 197 referenz.fm Technical Reference Menus EasyTrace: WebM Easy Trace: All OFF A31003-O1010-M100-3-76A9, 12/09/2007 5-21 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 198 referenz.fm Technical Reference Menus EasyTrace: All FATAL EasyTrace: All ERROR A31003-O1010-M100-3-76A9, 12/09/2007 5-22 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 199 referenz.fm Technical Reference Menus EasyTrace: All WARNING EasyTrace: All LOG A31003-O1010-M100-3-76A9, 12/09/2007 5-23 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 200 referenz.fm Technical Reference Menus EasyTrace: All TRACE EasyTrace: All DEBUG A31003-O1010-M100-3-76A9, 12/09/2007 5-24 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 201 referenz.fm Technical Reference Menus Generation A31003-O1010-M100-3-76A9, 12/09/2007 5-25 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 202 referenz.fm Technical Reference Menus View Session Data A31003-O1010-M100-3-76A9, 12/09/2007 5-26 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 203 referenz.fm Technical Reference Menus IP tests Memory information Core dump Restart phone A31003-O1010-M100-3-76A9, 12/09/2007 5-27 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 204 referenz.fm Technical Reference Menus Factory reset HPT interface A31003-O1010-M100-3-76A9, 12/09/2007 5-28 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 205: Local Phone Menu
referenz.fm Technical Reference Menus 5.1.2 Local Phone Menu Menu Further information ... |--- Administration |--- Applications |--- CPP |--- Java --- XML |--- Add application |--- Display name -> Section 3.12.1 |--- Application name -> Section 3.12.1 |--- Server address ->...
Page 206 referenz.fm Technical Reference Menus Menu Further information ... |--- DLS port -> Section 3.3.7 |--- Contact gap -> Section 3.3.7 --- Security status -> Section 3.3.7 |--- QoS |--- Service |--- Layer 2 -> Section 3.3.1.1 |--- Layer 2 voice ->...
Page 207 referenz.fm Technical Reference Menus Menu Further information ... |--- Default OBP domain -> Section 3.4.3.4 |--- SIP transport -> Section 3.4.3.5 --- Response timer (ms) -> Section 3.4.3.3 |--- Registration |--- SIP addresses |--- SIP server -> Section 3.4.4.1 |--- SIP registrar ->...
Page 208 referenz.fm Technical Reference Menus Menu Further information ... --- Keyset Lines --- Details For Keyset Line <n> |--- Address -> Section 3.6.1 |--- Ring on/off -> Section 3.6.1 --- Selection order -> Section 3.6.1 |--- Keyset operation |--- Rollover ring ->...
Page 209 referenz.fm Technical Reference Menus Menu Further information ... |--- Server -> Section 3.9.4.1 |--- Port -> Section 3.9.4.1 |--- Account -> Section 3.9.4.1 |--- Username -> Section 3.9.4.1 |--- Password -> Section 3.9.4.1 |--- FTP path -> Section 3.9.4.1 |--- HTTPS base URL ->...
Page 210 referenz.fm Technical Reference Menus Menu Further information ... --- Filename -> Section 3.9.7.1 |--- Screensaver |--- Use default -> Section 3.9.8.1 |--- Download method -> Section 3.9.8.1 |--- Server -> Section 3.9.8.1 |--- Port -> Section 3.9.8.1 |--- Account -> Section 3.9.8.1 |--- Username ->...
Page 211 referenz.fm Technical Reference Menus Menu Further information ... |--- Emergency number -> Section 3.7.1 --- Initial digits -> Section 3.7.1 |--- Canonical lookup |--- Local code 1 -> Section 3.7.2 |--- International code 1 -> Section 3.7.2 |--- Local code 2 ->...
Page 212 referenz.fm Technical Reference Menus OpenStage 60/80 V1R3.x only. OpenStage 60/80 only. V1R3.x only. OpenStage 40/60/80 only. A31003-O1010-M100-3-76A9, 12/09/2007 5-36 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 213: Glossary
bkglos.fm Glossary Nur für den internen Gebrauch Glossary Address of Record (AoR) A ->SIP ->URI that represents the „public address“ of a SIP user resp. a phone or line. The format is similar to an E-mail address: „username@hostname“. (for a definition, see RFC 3261) ADPCM Adaptive Differential Pulse Code Modulation.
Page 214 bkglos.fm Glossary Nur für den internen Gebrauch The Deployment Service (DLS) is a HiPath management application for the administration of workpoints, i. e. IP Phones and IP Clients, in both HiPath- and non-HiPath networks. Domain Name System. Performs the translation of network domain names and computer hostnames to ->IP addresses.
Page 215 bkglos.fm Glossary Nur für den internen Gebrauch Graphical User Interface. HTTP Hypertext Transfer Protocol. A standard protocol for data transfer in ->IP networks. Internet Protocol. A data-oriented network layer protocol used for transferring data across a packet-switched internetwork. Within this network layer, reliability is not guaranteed. IP address The unique address of a terminal device in the network.
Page 216 bkglos.fm Glossary Nur für den internen Gebrauch Light Emitting Diode. Cold light illumination in different colours at low power consumption. MAC Address Media Access Control address. Unique 48-bit identifier attached to network adapters. MDI-X Media Dependent Interface crossover (X). The send and receive pins are inverted. This MDI allows the connection of two endpoints without using a crossover cable.
Page 217 bkglos.fm Glossary Nur für den internen Gebrauch Quality of Service. The term refers to control mechanisms that can provide different priority to different users or data flows, or guarantee a certain level of performance to a data flow in accordance with requests from the application program. The OpenStage phone allows for the setting of QoS parameters on layer 2 and layer 3 (DiffServ).
Page 218 bkglos.fm Glossary Nur für den internen Gebrauch SNMP Simple Network Management Protocol. Used for monitoring, controlling, and administra- tion of network and network devices. SNTP Simple Network Time Protocol. Used to synchronize the time of a terminal device with a timeserver.
Page 219 bkglos.fm Glossary Nur für den internen Gebrauch VLAN Virtual Local Area Network. A method of creating several independent logical networks within a physical network. For example, an existing network can be separated into a data and a voice VLAN. VoIP Voice over IP.
Page 220 bkglos.fm Glossary Nur für den internen Gebrauch A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 221: Index
OperaAdminSIX.fm Index Nur für den internen Gebrauch Index Address of Record (AoR) 6-1 FTP settings 3-69 Administration Menu (Local Menu) 3-1 Function Keys 1-3, 1-4, 1-5 Administration Menu (Local Menu, Navigati- on) 3-2 Graphics Display 1-3, 1-4 Application Keys 1-3, 1-4, 1-5 Group pickup 3-42 Audio Keys 1-3, 1-4 Handset 1-3, 1-4, 1-5...
Page 222 OperaAdminSIX.fm Index Nur für den internen Gebrauch PBX 6-4 Vendor Class (DHCP) 2-12 Phone software (Download) 3-71 VLAN 2-11, 3-7 Picture Clips (Download) 3-77 Voice mail number 3-26 PoE (Power over Ethernet) 2-5, 6-4 Program Keys 1-3, 1-4 WBM 1-5 PSTN 6-4 WBM (Web Based Management) 6-7 Web Interface (WBM) 2-7...
Page 223 OperaAdminSIX.fm Index Nur für den internen Gebrauch A31003-O1010-M100-3-76A9, 12/09/2007 HiPath 8000 - OpenStage Family, Administrator Manual...
Page 224 Copyright © Siemens Enterprise Communications GmbH & Co. KG 12.9.07 Hofmannstr. 51, D-81359 München Ref. No.: A31003-O1010-M100-3-76A9 The information provided in this document contains merely general descriptions or characteristics of per- formance which in case of actual use do not always apply as described or which may change as a result of further development of the products.

This manual is also suitable for:

Openstage 40 Openstage 60 Openstage 80

Siemens OpenStage 20 Administration

1 Overview

2 Startup

3 Administration

4 Examples and Howtos

5 Technical Reference

Glossary

Index

Quick Links

Related Manuals for Siemens OpenStage 20

Summary of Contents for Siemens OpenStage 20

This manual is also suitable for:

Table of Contents