Page 2
Operating Instructions 200MV Your new G-K vocal monitor represents the very latest advances (9,10,11) Auxiliary Level. Bass and Treble Controls technology has to offer. It was designed to give you full control of your These control the level and tone of the signals coming in the AUX. 1 voice over other voices and instruments in the monitor mix without and 2 jacks (#14) to go through the internal power amplifier.
Page 3
THE DIRECT OUTS PROVIDE BALANCED VERSIONS OF THE INPUT SIGNALS, CH. 1 DIRECT IS CH. 1 X 1 AND CH. 2 DIRECT IS CH. 2 INPUT X 5. NEITHER OUTPUT IS AFFECTED BY THE LEVEL CONTROLS OR THE EQ OR THE ECHO. HOWEVER, CH. 1 DIRECT IS AFFECTED BY THE -10dB PAD.
Page 4
200 MV Operating Instruction Power Switch Specifications The power switch on the 200MV is located on the rear panel above the fuse holder. Power @ 400Hz 100 Watts into 4 Ohms @ .1 THD Power Cord 72 Watts into 8 Ohms @ .1% THD The power cord is detachable and plugs into a socket located on Signal - to - noise Ratio :>80dB the rear panel.
Page 5
OPTIONAL : YOU CAN ADD DIGITAL DELAY OR OTHER EFFECTS TO MIC AND INSTRUMENT BY GOING FROM 'LINE OUT'. INTO EFFECT AND BACK INTO AUX. IN. (NOTE: THIS IS NOT AN IN LINE EFFECTS LOOP SO THE RETURN SIGNAL IS SIMPLY ADDED TO THE MAIN SIGNAL.) 200MV Mic Stand Bracket The 200MV is mic stand mountable for maximum potential.
Page 6
GALLIEN-KRUEGER • 2240 PARAGON DR. • SAN JOSE, CA 95131 US: (408) 441-7970 • FAX (408) 441-8085 EUROPE: 41.42.234520 • FAX: 41.42.239525...