SAFETY PRECATUTIONSS ..............................2 1. SPECIFICATIONS ................................3 2. PARTS IDENTIFICATION ..............................4 3. DISASSEMBLY................................5-31 REMOVING AND REPALCING REFRIGERATOR DOORS ....................5 DOOR ....................................6-7 SUB, PCB .....................................8 DOOR ALIGNMENT ................................9 FAN AND FAN MOTOR ..............................9-10 REFRIGERATOR LIGHT (TOP) ............................. 11-12 MULTI DUCT ..................................
1. SPECIFICATIONS 1-1 LMXC23796* 22.5 cu.ft. ITEMS SPECIFICATIONS ITEMS SPECIFICATIONS DOOR DESIGN Side Rounded VEGETABLE TRAY Clear Drawer Type DIMENSIONS (inches) 35 3/4 X 32 1/8 X 70 1/4 (W X D X H)22.5 cu.ft. COMPRESSOR Linear NET WEIGHT (pounds) 168kg(371 lb) EVAPORATOR Fin Tube Type...
2. PARTS IDENTIFICATION Adjustable Refrigerator Shelf The shelves in your refrigerator are adjustable to meet your individual storage needs. LED interior lamps Door-In-Door Case The interior lamps light up A convenient storage area for the inside of the refrigerator. frequently-used items that require easy access.
3. DISASSEMBLY 3-1 REMOVING AND REPLACING REFRIGERATOR DOORS ● Removing Refrigerator Door CAUTION: Before you begin, unplug the refrigerator. Remove food and bins from doors. ● Left Door -FIG. 2 1. Disconnect water supply tube by pushing back on the disconnect ring (3).-FIG. 1 2.
3-8 DISPENSER 3-10 CustomChill DISPLAY 2) Holding the inner side of 1) Pull out the drain the dispenser pull forward to remove. 3) Remove the lead wire. CAUTION: When replacing the dispenser cover make sure the lead wire does NOT come off and the water line is not pinched by the dispenser.
With both hands, pull out each rail simultaneously until both rails are fully extended. Grasp the drawer on each side and hook the door supports into the rail tabs located on both sides. Remove the screws on both the left and right rails.