(p. 19). Otherwise you risk serious permanent damage to your hearing. Only use original Siemens batteries (100% mercury-free) and -charging devices. Otherwise you risk serious damage to health and property: The battery could explode, for instance.
Page 5
The phone may cause interference in the vicinity of TV sets, radios and PCs. Use only Siemens original accessories. This will avoid potential risks to health or property and ensure compliance with all relevant regulations.
Phone overview Call key Displayed/selected phone number. /name displayed, take calls. Show last phone numbers dialled in standby mode. On/Off/End key • Switched off: hold down to switch on. • During a conversation or in an application: press briefly to finish. •...
Page 7
Integrated antenna Do not obstruct the phone above the battery cover unnecessarily. Loudspeaker Display Input keys Camera Hold down in standby mode: Start camera function (p. 35). Ringtone • Hold down in standby mode: Switch all audible signals on/off (except alarm).
Display symbols Display symbols (selection) Signal strength. Charging. Battery charge level, e.g. 50%. Phonebook è Records Surf & Fun/Service provider portal É Organiser ç Messages Camera • Extras File system Ñ Settings All calls are diverted. Ringer off. Short ring (beep) only. Ringtone only, if the caller is stored in the Phonebook.
Getting started The front and back covers of the casing (CLIPit™ p. 99) as well as the keypad can be changed in a matter of seconds - no tools required. Please switch the phone off first: Assembling Dismantling Note Your phone is supplied with a protective file applied to the display and the display cover of the front shell.
Insert SIM card/battery The service provider supplies you with a SIM card on which all the im- portant data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.
Charge battery The battery is not fully charged when delivered. Plug charger cable into the bottom of the phone, plug power supply unit into a mains pow- er socket and charge for at least two hours. Display when charging is in progress During charging.
Switch on, off / PIN entry Switch on/off Hold down On/Off/End key. Enter PIN The SIM card can be protected with a 4- to 8-digit PIN. Enter the PIN using the number keys. The charac- ters **** sure nobody can read your PIN on the display.
General instructions User guide The following symbols are used to explain operation: Enter numbers or letters. On/Off/End key. Call key. Press control key (left/right). Press control key (top/bottom). Displays a function. §Menu§ Function dependent on service provider, may require special registration. Without SIM card If you switch on the phone without a SIM card you can still use some...
Standard functions Option menus Menu functions are made available in options menus. A selection of functions that occur frequently is shown here. §Options§ Open menu. Edit Open the entry to edit. Capacity Display available capacity. View Display entry. Delete / Delete entry/delete all Delete all entries after confirmation.
Security The phone and SIM card are protect- ed against misuse by several security codes. Keep these confidential numbers in a safe place where you can access them again if required. Codes Protects your SIM card (personal identification number). PIN2 This is needed to set the charge detail display and to access additional functions requiring...
Following the third unsuccessful at- tempt, access to the phone code and the functions that use it is denied. If this happens please contact Siemens Service (p. 95). Clear SIM card barring If the PIN is entered incorrectly three times, the SIM card is barred.
Where do I get what? Additional ring tones, logos, animations and Java applications are available from your service provider or directly from Siemens. Service provider portal Depending on your service provider, you may have direct access on your phone to its portal via menu options or bookmarks.
Calling Dialling with number keys The phone must be switched on (standby mode). Enter number (always with area code/interna- tional dialling code). A short press clears §Clear§ the last digit, a long press clears the entire phone number. Press the Call key. The displayed phone number is dialled.
If the number is busy If the called number is busy or cannot be reached because of network problems several options are available (depending on the service provider). An incoming call or any other use of the phone interrupts these functions. Either Auto.
Accept call The phone must be switched on (standby mode). An incoming call will interrupt any other use of the phone. Press. §Answer§ Press. A phone number transmitted by the network is displayed or the corresponding name if it is contained in the Phonebook (p.
Swap between 2 calls Establish a second connection You can call another number during a call. Open call menu y menu§ Hold The current call is put on hold. Call held Now dial the new phone number (Phonebook When the new connection is established: Open call menu y menu§...
Conference Call up to 5 parties one by one and link them together in a conference call. Some of the functions described may not be supported by your service provider or may have to be enabled specially. You have established a connection: Open menu and select y menu§...
Babysitter If this is active, only one number can be dialled. Switch on ¢ m ¢ Security §Menu§ ¢ Babysitter Press. §Select§ Enter phone code. The phone code (4- to 8-digits) is set by you and entered at the first security setting.
Text entry Text entry without T9 Press number key repeatedly until the required letter appears. After a brief interval the cursor will advance. Example: Press once briefly to type the letter a, twice to type b, etc. Hold down to write the number.
Text entry with T9 "T9" deduces the correct word from the individual key entries by making comparisons with an extensive dictionary. Activate, deactivate T9 Open text menu. §Options§ Select. Text input T9 preferred Select. Activate T9. §Change§ Select Input language Select the language in which you want to compose your message.
Page 26
Additional information Set a full stop. A word is concluded if it is followed by a space. Within a word, a full stop represents an apostrophe or hyphen: e.g. §provider.s§ Go to the right. Ends a word. Press briefly: Swap between: abc, Abc, shown in top line of display.
Correct a word Words written with T9: Move left or right, word by word, until the required word is §highlighted§. Scroll through the T9 word suggestions again. » Deletes the character to §Clear§ the left of the cursor and displays a new possible word! Words not written with T9: Move letter by letter to...
Phonebook Enter frequently used phone numbers in the Phonebook with a special name. If a phone number is stored with a name, it appears on the display when you are called. You can assign important phone numbers to different groups. <New entry>...
Call (search for an entry) Open Phonebook. Select a name with the first letter and/or scroll. Number is dialled. Call using record no. A record number is automatically assigned to every new entry in Phonebook. Enter record number. Press. Press. Change entry Select entry in Phonebook.
Select Picture. The file system (p. 88) is opened and a list of the pictures is displayed. Select picture. The picture is displayed. §Select§ The picture is assigned to §Select§ the phone number. It appears with a in the Phonebook. Delete/change picture Select entry with picture in Phonebook.
<Mobile> Phonebook entries are stored in the phone memory when the SIM card memory is full. Completing phone numbers in the Phonebook Digits may be replaced by a “?” when phone numbers are entered in the Phonebook: Press down. These wildcards must be replaced with numbers before dialling (e.g., with the extension numbers in a phone system).
Apply voice dialling Press down (in standby mode). Now state the name; the number is dialled. Additional information Noisy environments may affect voice recognition. Delete/renew recording You can delete or renew the voice recording for a Phonebook entry. Open Phonebook. Select entry with voicedialling.
Change group name Give the selected group a §Rename§ new name. Additional information group: Contains all Phonebook entries that do not belong to a group (name cannot be changed). SMS to group ...p. 40 Ring tone for group Assign a ring tone to a group that plays when one of its members calls you.
Records Your phone stores the phone numbers of calls for convenient redialling. ¢ Z §Menu§ Press. §Select§ Select call list. Press. §Select§ Select phone number. Dial phone number. Display information on §View§ the phone number. 10 phone numbers can be stored in each call list: Calls missed The phone numbers of calls that you...
Durat/charges You can display charge details and the duration of different types of calls while you speak, as well as setting a unit limit for outgoing calls. ¢ Z ¢ §Menu§ Durat/charges Select type of call: Last call All outg. calls All incoming Remain.
Camera Photos you have taken with the integrated camera may be viewed, saved, • used as wallpaper, startup and shutdown animation and screen- saver, and • sent as an MMS message. Switch on ¢ • §Menu§ Press down (in standby mode).
Automatic, Indoor, Outdoor White bal- ance Set with: Info Displaying help text. Photo album Open menu. §Options§ View pictures Select. Scroll through photos taken. Photo options You can • use the displayed photo as wallpa- per, startup and shutdown anima- tion and screensaver, and •...
Voice message/mailbox ¢ ] ¢ §Menu§ Setup ¢ Voice message Most service providers offer a mailbox, in which a caller may leave a voice message for you • if your phone is switched off or not ready to receive, • if you do not want to answer, •...
You can transmit and receive very long messages (up to 760 characters) on your phone. They are automati- cally composed of several "normal" SMS messages (note higher charges). Additionally you can insert pictures and sounds in an SMS. Depending on the service provider, e-mails and faxes can also be sent and e-mails received via SMS (change setting if necessary, p.
Text options Open text menu §Options§ Save Save composed text in draft list. Picture&sound Add pictures, animations and sounds into mes- sage (see following text). Text modules Insert text module (p. 26). Format Line feed Small font, Medium font, Large font Underline Def.
Additional information EMS (Enhanced Messaging Service) You can use this service to send pictures and sounds in addition to (formatted) texts (p. 39). Playback only occurs if the destina- tion phone supports the EMS standard. This can result in messages that are longer than a single SMS.
Read SMS Arrival of new SMS an- … nounced on display Service provider 01.10.2003 … To read the SMS press the left control key. 01.10.2003 Date/time Tel. no./sender 55536989876 Are we meeting tomorrow? Message Reply Scroll through message line by line. See below.
Phone number/URL in SMS Phone numbers §markiert§ be dialled or saved in the Phonebook. It is also possible to select and call URLs (Inter- net addresses) directly and start an HTTP download. The HTTP profile (p. 70) or WAP profile (p. 54) must be set and acti- vated.
List options Each list offers different functions: View View entry. Reply Answer incoming SMS messages immediately. Mark a.un- Mark message as unread. read Save no. to Copy a highlighted phone number to Phonebook. Archive Move SMS message to archive. Send via ... Select an SMS profile for transmission (p.
SMS profiles ¢ ] ¢ Setup §Menu§ Up to 5 SMS profiles can be set. The transmission characteristics of an SMS are defined in these. The pre- setting depends on the SIM card in- serted. Select profile. Open menu. §Options§ Change sett.
The Multimedia Messaging Service enables you to send texts, pictures (also photos) and sounds in a com- bined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show". Depending on your phone's settings, you will receive either the complete message automatically or notifica-...
Sound: Press §Insert§. Filesystem: select a stored melody (see also p. 88). New sound: tones, for sending by MMS only (see below). Slide duration: Enter length of display for individual pages (minimum 0.1 seconds). New recording The phone records via its micro- phone.
Text options Open menu. §Options§ Line feed Start new line. Save Save MMS text. Clear text Delete the whole text. Text mod- Insert text module (p. 26). ules (For standard functions see p. 13) MMS options Different functions are available, depending on the context: Insert line Extend address field by...
Read MMS Automatic presentation §Play§ of the MMS. Use any key to cancel. Scroll page by page with the control key. Call up individual pages directly by number key. Attachments An MMS can contain several attach- ments. Open menu. §Options§ Attachments Select.
Page 50
List options Different functions are available, depending on the list/context. View Show MMS Info. Play Read MMS. Reply Reply to MMS immediately. Receive Start inward transmission of MMS when only notification is highlighted (p. 50). Receiv.all Start receipt of all new MMS messages.
MMS profiles ¢ ] ¢ Setup §Menu§ A number of MMS profiles can be se- lected. The transmission characteris- tics of an MMS are defined in these. Select profile. Open menu. §Options§ Change sett. Select. Expiry time Select the period in which the service centre is to try to deliver the message: Manual,...
CB services ¢ ] ¢ §Menu§ Setup ¢ CB services Some service providers offer information services (info channels, Cell Broadcast). If reception is activated, your Topic list you with messages on the activated topics. Receive CB You can activate and deactivate the CB service.
Surf & fun Internet browser (WAP) Get the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can download games and applications to your phone. Internet access may require registration with the service provider. Note Depending on your service provider, you may have direct access to its portal instead...
Resume Call up most recently visited page still in the memory. Go to... Enter URL to access WAP page directly, e.g. wap.my-siemens.com Select from list of most recently visited WAP addresses. Reload Reload page. Inbox Inbox for messages from the WAP server (WAP push).
Sounds (ringer)/silent alert on/off ...p. 62 Applications and games can be found at: wap.my-siemens.com or on the Internet at: www.my-siemens.com/city Games and applications Applications and links that are already stored on the phone are found under: ¢...
Page 57
Receive information If information required, say, by an application that has already been installed, is received via SMS, the symbol appears in the display. Pressing on the left of the control key starts the relevant application and the information is processed. Additional information The following key control is used for many games (virtual joystick):...
Internet. Downloading or running applications will not affect or change the software already installed on your Java™-enabled mobile phone. Siemens excludes all warranty and liability claims in respect of or in connection with any applications subsequently installed by the customer and any software not included in the original delivery package.
Setup Profiles Several settings can be stored in a phone profile in order, for example, to adapt the phone to the surrounding level of noise. • Five standard profiles are provided with default settings. They can be changed however: Normal envi. Quiet environ.
Rename Change individual profile (except default profiles). Car Kit If a Siemens original Car Kit (p. 100) is used, the profile is activated automatically as soon as the phone is inserted into the cradle (p. 75). Headset If an original Siemens headset is (p.
Display ¢ m ¢ Display §Menu§ ¢ Select function. Language Set the language of the display text. When "automatic" is set, the language of your service provider is used. If a language that you do not understand happens to be set, the phone can be reset to the language of your service provider with the following input (in standby mode):...
Timeout Set period after which the screensaver starts. Security Phone-code protected termination of screensaver. Auto key The keypad is locked lock automatically if no key has been pressed for one minute in standby mode. Unlocking: Hold Additional information You can also receive individual logos, screensavers and animations by SMS (p.
Audio ¢ m ¢ Audio §Menu§ ¢ Select function. You can set the tones to match your needs. Ringer setting Activate/deactivate all On/Off tones. Reduce ring tone to a Beep short signal (beep). Additional information Switch ringtone on/off. Display: Beep. Display: ringer off.
¢ m ¢ Audio §Menu§ ¢ Select function. Ring tones Set different ring tones for types of call/functions. Select: New ringtone Incoming calls Alarm Alarm clock Messages Cell broadcast Start melody End melody An already assigned ring §Select§ tone is played back or the list of possible ring tones is displayed.
Keys ¢ m ¢ Keys §Menu§ ¢ Select function. Any to answer Incoming calls can be accepted by pressing any key (except for Auto key lock If activated, the keypad is locked automatically if no key has been pressed for one minute in standby mode.
Page 66
Set up call divert (example): The most common condition for call divert is, for example: Unanswered Select Unanswered. (Includes the conditions reachable, Busy, see below) Press. §Select§ Select. Enter the phone number to which the caller will be diverted (If not already entered) Select this phone number ·...
Page 67
Clear all All set diverts are cleared. Additional information Note that the divert is stored in the network and not in the phone (e. g., when the SIM card is changed). Check condition or delete it First select the condition. §Select§...
¢ m ¢ Phone setup §Menu§ ¢ Select function. Phone identity The phone identity number (IMEI) is displayed. This information may be useful for customer service. Alternative input in standby mode: # 0 6 # Software version Display the software version for your phone in standby mode: # 0 6 #, then press §Info§.
§Options§ Open menu. Set the timezone. Rename Assign a new name to time zone. Activate/deactivate daylight saving. When daylight saving is activated a sun icon appears on the display. Auto The time zone is switched timezone automatically to local time by the network.
• The access profiles must be configured manually. If necessary, check with your service provider for details. Current settings for each service provider may be found in the Internet under www.my-siemens.com/customercare in the FAQ section. Select profile. Open menu. §Options§ Change sett.
Page 71
APN: Enter service provider address. Login name: Enter login name. Password: Enter password (shown as a series of asterisks). DNS1 / (optional). DNS 2: Save settings. §Save§ ¢ m ¢ §Menu§ Connectivity ¢ Select function. HTTP profile Select profile. Fax/data mod. Fax/data mode using a PC With the phone and a connected PC, you can transmit and receive faxes...
Security ¢ m ¢ Security §Menu§ ¢ Select function The phone and SIM card are protected against misuse by several security codes. Codes control, Change PIN, Chg.phonecode, (p. 14). Babysitter (Phone-code protected) Only one phone number can be dialled. To do this hold down the right control key (p.
Page 73
¢ m ¢ Security §Menu§ ¢ Select function Barrings Barring restricts the use of your SIM card (this is not supported by all service providers). You need a 4-digit password which your service provider will give you. You may need to be registered separately for each barring.
Network ¢ m ¢ Network §Menu§ ¢ Select function Line This function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone. Select line Select the currently used phone number.
Page 75
Your service provider is displayed: Display list of preferred §List§ networks. Create new entry: • Select empty line, press §Entry§, then select another entry from the list of service providers and confirm. Change/delete entry: • Select entry, press §Change§, then select another entry from the list of service providers and confirm or press §Clear§.
Accessories §Menu§ ¢ Select function. Car Kit Only in combination with an original Siemens handsfree Car Kit (p. 100). The profile is activated automatically as soon as the phone is inserted into the cradle. Auto answer (Factory default: off) Calls are accepted automatically after a few seconds.
My menu Press. §Menu§ Press. §My menu§ Create your own menu with frequently used functions, phone numbers or WAP pages. The list of 10 possible entries is preset. You can, however, change it as you want. Select the required entry. §Select§...
Organiser Calendar ¢ ç ¢ Calendar §Menu§ You can enter appointments in the calendar. Time and date must be set for the calendar to work correctly (p. 67). Monthly overview Aug 2003 Info Press briefly to page between days, hold down to page between months.
Page 79
Memo. Text input for description. Call. Enter phone number. Shown with alarm. Meeting. Text input for description. Birthday Anniversary È Enter name and date. Then make further entries field by field. Description: Description of what the appointment involves. Date: Date of appointment. Time: Time of appointment.
Alarm When the set date and time are reached there is an audible and a visual alarm. If an alarm is missed it appears in the list of missed appointments (p. 80). Alarm type Memo/Meeting: the text is shown in the display. Alarm type Call: The phone number is displayed and can be dialled immediately.
Notes ¢ ç ¢ Notes §Menu§ Use your phone as a notepad. ç Notes <New entry> Shopping list Flight number New entry Press. §Select§ Enter text, up to 150 characters. Open menu. §Options§ Store entry. Save Text entry options Open menu. §Options§...
Time zones Set the time zone for your area. Select the required time zone from list ... … and set it. §Set§ §Options§ Open menu. Set the timezone. Rename Assign a new name to time zone. Activate/deactivate daylight saving. If summertime is activated, a sun is shown on the display.
Extras Note Depending on your service provider, the menu Extras may also include Games & more. See the (p. 52) column for further functions. Alarm clock ¢ y ¢ §Menu§ Alarm clock The alarm will ring at the time set by you, even when the phone is switched off.
Currency conv ¢ y ¢ Currency conv §Menu§ Calculate the exchange rates. You can enter three currencies. If no currency has yet been entered, press for the first input. §OK§ Otherwise: §Options§ Open menu. New entry Select and enter symbols for the currencies.
Countdown ¢ y ¢ Countdown §Menu§ A set time elapses. The last 3 seconds are indicated by a beep. At the end a special beep sounds. Set period of time. §Set§ Start counter. §Start§ Interrupt counter. §Stop§ Change period of time. §Change§...
New ringtone ¢ y ¢ New ringtone §Menu§ You can use the phone’s microphone to record tones and sounds and then use these as ring tones (p. 63). Start recording. The §Record§ current recording duration and available time remaining are displayed. End recording.
Fast access key The control key (left) and the number keys 2 to 9 (speed dialling numbers) can each be assigned an important phone number or a function. The phone number can then be dialled or the function started at the touch of a button. Additional information The control key (left) may be preconfigured by the service provider (e.g.
Speed dialling keys Number keys 2 to 9 can be used as speed dialling numbers for fast access. For available key assignments see p. 86. Number key 1 is reserved for the mailbox number (p. 37). Change In standby mode: Press a number key (2- 9).
Filesystem To organise your files, you can use the file system like a PC file manager. The file system assigns special folders to different data types. §Menu§ KÑ A list of the folders and files is displayed. Navigate through this list using the control key: scroll up and down.
Page 90
Filesystem options Open menu. §Options§ Open Open folder. Move Place marked file or folder in temporary memory. Copy Copy marked file into temporary memory. Paste Transfer content of temporary memory into current folder. New folder Create new folder. Attributes Display information on file or folder selected.
Siemens Data Suite Siemens Data Suite is a software package that extends the functionality of your phone together with a Windows® PC. The telephone and PC are connected by data cable (accessories, p. 99). For error-free data transfer, the telephone must be in standby mode (e.g.
Messenger Using the Messenger, you can organise your short messages conveniently from your PC: • Save SMS messages on your PC to free up memory on your phone. • You can create messages on your PC and send them from your phone.
Questions & Answers If you have any questions on the use of your phone, you can contact us at www.my-siemens.com/customercare around the clock. As further help we have listed below some frequently asked questions and answers. Problem Possible causes Phone cannot be On/Off key not pressed long switched on.
Page 94
Problem Possible causes No network Weak signal. connection. Outside GSM range. Invalid SIM card. New network not authorised. Network call barring is set. Network overloaded. Phone loses Signal too weak. network. Calls not possible. Second line set. New SIM card inserted. Charge limit reached.
Page 95
Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider. Contact Siemens Service (p. 95). Check with your service provider. Check settings (p. 70). # 9 9 9 9 #...
(IMEI, to display press * # 0 6 #), the software version (to display, press * # 0 6 #, then info) and if available, your Siemens Service customer number. If repair work is necessary, please contact one of our service centres: Abu Dhabi ...0 26 42 38 00...
Care and maintenance Your phone has been designed and manufactured to the highest of standards and should be treated with the greatest of care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity! Precipitation, humidity and liquids contain minerals that will corrode electronic...
Product data Declaration of conformity Siemens Information and Communication mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The declaration of conformity (DoC) concerned has been signed.
Carrying Cases A range of carry cases is available from specialist shops or our online shop: Original Siemens Accessories www.siemens.com/ mobilestore Power Li-ion battery (700 mAh) EBA-510 Spare battery.
Optional Car Kit accessories Car Handset HKO-550 VDA Adapter Cable HKO-560 Car Data Adapter HKO-530 Push To Talk Key HKO-520 Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessories www.siemens.com/ mobilestore...
After six months, if the battery is clearly suffering from loss of performance, we recommend that you replace it. Please buy only Siemens original batteries.
• In the case of new devices and their com- ponents exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
• In the case of new devices and their com- ponents exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
0.67 W/kg****. The SAR information can also be found on the Siemens web site at www.my-siemens.com While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the legal requirements.
Page 106
SAR - European Union (RTTE) Further information: www.who.int/peh-emf, www.mmfai.org, www.my-siemens.com ** The CE mark confirms that the product is in compliance with the legal requirements of the European Union as a prerequisite for the plac- ing on the market and the free movement of goods within the Euro- pean internal market.
The highest SAR value for this model phone when tested for use at the ear 0.67 W/kg***. SAR information can also be found at www.my-siemens.com While there may be differences between the SAR levels of various phones and at various positions, they all meet the international guidelines for safe RF exposure.
Menu tree > <New entry> Phonebook è <Special books> Groups > Internet Surf & fun É Games & more Filesystem Ñ > Calendar Organiser ç Alarm Notes Missed alarms Time zones Calend. setup > New SMS Messages New MMS Inbox Draft >...
> Unsent Messages Sent SMS archive Text modules Setup > Calls missed Records Calls received Calls dialled Erase records Durat/charges > SIM services Extras Alarm clock Calculator Currency conv Stopwatch Countdown New ringtone > Voice command > > > Voice message CB services >...
Page 110
Camera • > Profiles Setup Display Audio > Language Text input Wallpaper Logo Colour scheme Screensaver Start up anim. Shutdn anim. Own greeting Big letters Illumination Contrast > Ringer setting Silent alert Volume Ring tones > T9 preferred Input language >...
> Audio Setup Keys Phone setup Clock Connectivity > Ring tones Call screening Key tones Minute beep Info tones > Any to answer Auto key lock Key tones > Call waiting Hide ID Divert Fact. settings Filesystem Phone identity Auto off >...
Page 112
> Connectivity Setup Security Network > GPRS info Authentication Data services HTTP profile Fax/data mod. > Codes Babysitter ‚ Only Last 10 only This SIM only Barrings > Line Network info Choose network Auto network Pref. network Band selection Fast search User group >...
Page 113
> Accessories Setup Note on Surf & fun Depending on your service provider, you may have direct access to its portal instead of the Surf & fun menu option. Contact your service provider for details of the services offered on the portal.
Index Accessories... 99 Account limit... 34 Agenda ... 77 Alarm Alarm clock... 82 Appointment ... 78 Switch off ... 79 Type ... 79 Alarm clock ... 82 All calls (call time/charge) ... 34 All calls (diversion) ... 65 All incoming (Barrings) ... 72 Answering service (external)...
Page 115
Conference... 21 Connection profile... 69 Contacts Management... 90 Contrast (message on display) ... 61 Control code (DTMF) ... 32 Countdown ... 84 CSD data ... 69 Currency converter ... 83 Customer care ... 95 Data exchange (settings) ... 68 Data Exchange Software... 90 Date format...
Page 116
Last 10 only... 71 Limit (call time/charge) ... 34 Logo, provider logo ... 60 Loss of phone, SIM card ... 98 Mailbox ... 37 Maintenance of phone... 97 Menu My menu ... 76 Speed dialling ... 14 Steuerung... 12 Menu tree ... 107 Message CB ...
Page 117
Profiles ... 58 Security ... 71 Short message (SMS)... 38 Shown in the display ... 7 Shut down animation ... 61 Siemens City Portal ... 16 Siemens Data Suite... 90 Signal strength ... 11 Silent alert... 62 SIM card Clear barring... 15 Insert...