Installation Instructions Ceramic Cooktops KM 421 KM 424 KM 427 en - US, CA To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 05 647 580...
IMPORTANT SAFETY INSTRUCTIONS Note to the installer: Please leave these instructions with the consumer. Installation The minimum distances given in these instructions must be observed to ensure safe operation and to reduce the risk of fire. To prevent damage, install cabinetry recommended and the venting hood before installing the cooktop.
However, under certain circumstances it may be possible for an installation in these applications. Please contact the nearest Miele Dealer or the Miele Technical Service Department with specific requirements. Because of the heat radiated from this type of appliance we do not recommend installing it over a drawer.
Appliance and cut-out dimensions KM 421 ( 8 5 m ( 8 m ( 6 1 4 2 m m m m ) ( 5 3 ( 8 5 i n . * max.R3/16 max.R4mm ( 6 0 a Spring clips...
Page 6
Appliance and cut-out dimensions KM 424 ( 8 5 m ( 8 m m m ) ( 7 6 3 m ( 5 3 2 ( 8 5 * max.R3/16 max.R4mm ( 7 4 a Spring clips ^ Make the countertop cut-out following If, during installation, the seal the dimensions given in the around the frame does not sit flush...
Page 7
Appliance and cut-out dimensions KM 427 ( 8 5 m ( 8 m ( 8 5 ( 5 3 2 m ( 9 0 3 m m ) * max.R3/16 max.R4mm i n . ( 8 8 a Spring clips ^ Make the countertop cut-out following If, during installation, the seal the dimensions given in the...
Installation Installing the spring clips Granite countertops ( 7 5 m 3 ” For granite countertops, the spring clips, b, must be placed in position and secured with double-sided tape. In addition, coat the edges of the ^ Fix the supplied spring clips, a, at spring clips with silicone sealant.
Installation Installing the cooktop ^ Feed the power cord down through The cooktop must not be the cut-out and connect the permanently sealed into the appliance to the power supply. countertop when installed. The ^ Position the cooktop on the spring sealing strip under the edge of the clips, a.
Please leave these instructions with the consumer. Power supply: Please check the data plate. KM 421: – 240 VAC, 60 Hz, 30 A fuse rating – 208 VAC, 60 Hz, 30 A fuse rating KM 424: – 240 VAC, 60 Hz, 40 A fuse rating –...
Page 12
Alterations rights reserved / 4810 M.-Nr. 05 647 580 / 03 For the most updated manual see the Miele website.