Whirlpool WHES33 Installation And Operation Manual
Demand controlled water softener
Hide thumbs
Also See for WHES33:
- Installation and operation manual (24 pages) ,
- Installation and operation manual (28 pages)
Table of Contents
Advertisement
Model WHES20
Model WHES30
Model WHES33
How to install, operate
and maintain your Demand
Controlled Water Softener
Do not return water softener to store
If you have any questions or concerns when
installing, operating or maintaining your water
softener, call our toll free number:
1-866-986-3223
Monday- Friday, 8 AM - 7 PM EST or visit
www.ecodynewatertreatment.com
When you call, please be prepared to provide
the model and serial number of your product,
found on the rating decal, typically located on
the rim below the salt lid hinges.
Systems tested and certified by NSF International
against NSF/ANSI Standard 44
for hardness reduction and efficiency,
and certified to NSF/ANSI Standard 372.
Systems tested and certified by the Water Quality
Association against CSA B483.1.
Manufactured and warranted by
Ecodyne Water Systems
1890 Woodlane Drive
Woodbury, MN 55125
7335121 (Rev. D 10/18/12)
Advertisement
Table of Contents
Related Manuals for Whirlpool WHES33
Summary of Contents for Whirlpool WHES33
- Page 1 Model WHES20 Model WHES30 Model WHES33 How to install, operate and maintain your Demand Controlled Water Softener Do not return water softener to store If you have any questions or concerns when installing, operating or maintaining your water softener, call our toll free number:...
-
Page 2: Table Of Contents
Customizing Features / Options ....12-14 Programming the Water Softener (Models WHES30 & WHES33) Customizing Features / Options ..15-18 Routine Maintenance . -
Page 3: Specifications & Performance Claims
Operational efficiency is the actual efficiency after the system has been installed. It is typically less than the rated efficiency, due to individual application factors including water hardness, water usage, and other contaminants that reduce a softener's capacity. Model WHES20 Model WHES30 Model WHES33 Model Code LE20 LE31 LE33 8,700 @ 1.7 lbs. -
Page 4: Water Softener Safety
Water Softener Safety Your safety and the safety of others are very important. We have provided many safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... -
Page 5: Inspect Shipment
Inspect Shipment The parts required to assemble and install the water Remove and discard (or recycle) all packing materials. softener are included with the unit. Thoroughly check To avoid loss of small parts, we suggest you keep the the water softener for possible shipping damage and small parts in the parts bag until you are ready to use parts loss. -
Page 6: Installation Requirements
Installation Requirements LOCATION REQUIREMENTS PLUMBING CODES Consider all of the following when selecting an installa- All plumbing must be completed in accordance with tion location for the water softener. national, state and local plumbing codes. = Do not locate the water softener where freezing In the state of Massachusetts: The Commonwealth temperatures occur. - Page 7 Installation Requirements VALVE DRAIN REQUIREMENTS 1/4” NPT Thread Barbs for 3/8” Using the flexible drain hose (included), measure and I.D. Tubing cut to the length needed. Flexible drain hose is not Hose Clamp allowed in all localities (check your plumbing codes). If local codes do not allow use of a flexible drain hose, a Drain Hose rigid valve drain run must be used.
-
Page 8: Dimensions
Dimensions 19” 3-3/8” 18” IN – OUT 43-5/16” 36-1/2” 35” FIG. 8 Installation Instructions TYPICAL INSTALLATION Ground Hard Water Conditioned Clamp Water To Outside Faucets Pipe Ground Clips 1” NPT Sweat Water Softener Clamp Adaptor (not Valve included) 1” NPT Plug-in Threaded Transformer... - Page 9 Installation Instructions TURN OFF WATER SUPPLY Nozzle Top Cover Venturi Brine Tank 1. Close the main water supply valve, located near the Assembly Overflow well pump or water meter. Elbow Nut - 2. Open all faucets to drain all water from house pipes. Ferrule NOTE: Be sure not to drain water from the water Salt...
-
Page 10: Install Salt Storage Tank Overflow Hose
Installation Instructions COMPLETE INLET AND OUTLET PLUMBING Measure, cut, and loosely assemble pipe and fittings from the main water pipe to the inlet and outlet ports of the water softener valve. Be sure to keep fittings fully together, and pipes squared and straight. Be sure hard water supply pipe goes to the water sof- Electrical Shock Hazard tener valve inlet side. -
Page 11: Test For Leaks
Installation Instructions TEST FOR LEAKS ADD WATER AND SALT TO THE SALT STORAGE TANK To prevent air pressure in the water softener and plumbing system, complete the following steps in order: 1. Fully open two or more softened cold water faucets Excessive Weight Hazard close to the water softener, located downstream Use two or more people to move and lift salt... -
Page 12: Programming The Water Softener (Model Whes20) Customizing Features / Options
Programming the Water Softener (Model WHES20) Display UP button PRESS TO SCHEDULE PROGRAM HOLD TO START RECHARGE FIG. 15 RECHARGE button DOWN button PROGRAM button SET WATER HARDNESS NUMBER When the transformer is plugged into the electrical outlet, a model code and a test number (example: 1. -
Page 13: Whes20 Customizing Features/Options
Programming the Customizing Water Softener Features / Options (Model WHES20) (Model WHES20) SET RECHARGE (REGENERATION) TIME RECHARGE NOW 1. Press the PROGRAM button once again to display The RECHARGE button is used to initiate an immedi- a flashing “2:00AM” and the words “RECHARGE ate recharge. - Page 14 Customizing Features / Options (Model WHES20) SALT EFFICIENCY MAXIMUM DAYS BETWEEN REGENERA- TIONS When this feature is ON, the water softener will oper- ate at salt efficiencies of 4000 grains of hardness per The water softener automatically controls regenera- pound of salt or higher (May recharge more often tion frequency.
-
Page 15: Programming The Water Softener (Models Whes30 & Whes33) Customizing Features / Options
When the transformer is plugged into the electrical outlet, the model code (“LE31” fro Model WHES30 or “LE33” for Model WHES33) and a test number (exam- ple: J3.0), are briefly shown in the display. Then the words “CURRENT TIME” appear and 12:00 PM FIG. -
Page 16: Whes30 & Whes33 Customizing Features/Options
Programming the Customizing Water Softener Features / Options (Models WHES30 & WHES33) (Models WHES30 & WHES33) continued from previous page NOTE: As with all other water system applications, leaks may occur. Leaks may not be immedi- 2. Press the UP or DOWN buttons to set your ately apparent. - Page 17 Customizing Features / Options (Models WHES30 & WHES33) SET SALT LEVEL WATER FLOW INDICATOR Whenever the softener has water flowing from the The water softener has a salt monitor indicator light to outlet port, the display will show water droplets scroll- remind you to add salt to the storage tank.
-
Page 18: Clean Feature Minutes
Customizing Features / Options (Models WHES30 & WHES33) CLEAN / CLEAR WATER IRON REDUCTION MAXIMUM DAYS BETWEEN REGENERA- TIONS This feature is beneficial on water supplies containing ferrous (clear water) iron. The default setting is OFF. The water softener automatically controls regenera- When this feature is set to ON, an additional back- tion frequency. -
Page 19: Adding Salt
Routine Maintenance ADDING SALT CLEANING THE NOZZLE & VENTURI Lift the salt lid and check the salt storage level fre- A clean nozzle & venturi (See Figure 43) is a necessity quently. If the water softener uses all the salt before for the water softener to work properly. -
Page 20: Troubleshooting
Troubleshooting (Model WHES20) AUTOMATIC ELECTRONIC DIAGNOSTICS 3. The letter “P” and a dash (or dashes) indicate POSITION switch operation (See Figure 45). If the This water softener has a self-diagnostic function for letter appears, the switch is closed. If the dash the electrical system (except input power and/or water shows, the switch is open. -
Page 21: Resetting To Factory Defaults
Troubleshooting (Model WHES20) RESETTING TO FACTORY DEFAULTS 2. After observing fill, press the RECHARGE button to move the softener’s valve into the brine position. A To reset the electronic controller to its factory default slow flow of water to the drain will begin. Verify for all settings (time, hardness, etc.): brine draw from the brine tank by shining a flash- light into the brinewell and observing a noticeable... -
Page 22: Automatic Electronic Diagnostics
Use the following procedures to advance the water model code (“LE31” for Model WHES30 or “LE33” softener through the regeneration cycles to check for Model WHES33) shows in the display. This operation. code identifies the softener model. If an incorrect... - Page 23 Troubleshooting (Models WHES30 & WHES33) RESETTING TO FACTORY DEFAULTS 2. After observing fill, press the RECHARGE button to move the softener’s valve into the brine position. A To reset the electronic controller to its factory default slow flow of water to the drain will begin. Verify for all settings (time, hardness, etc.):...
-
Page 24: Exploded View & Parts List
Softener Exploded View Valve Assembly See Pages 26 & 27 for parts... - Page 25 Repl. Brine Tank (PWA), Model WHES20 7248706 Ground Clamp Kit Repl. Electronic Control Board 7335155 (PWA), Models WHES30 & WHES33 Bypass Valve 7278434 (incl. 2 ea. of Key No. 73) Top Cover & Faceplate Assembly, 7267108 Model WHES20 (order following decal) 7139999 Drain Hose, 20 ft.
- Page 26 Valve Exploded View Wear Strip Seal Cross-section View...
- Page 27 Valve Parts List Part No. Description Part No. Description Turbine & Support Assembly 7224087 Screw, #8-32 x 1” (2 req.) – 7113040 (includes 1 ea. of Key Nos. 74, 75 7286039 Motor (incl. 2 ea. of Key No. 50) & 2 ea. of Key No. 73) 0900857 Screw, #6-20 x 3/8”...
-
Page 28: Warranty
The factory warranty for your water softener is shown below. The one year full warranty period on parts and labor can be extended to two years from the date of purchase if you use Whirlpool™ WHE-WSC Water Softener Cleanser on your system. Use one bottle of Whirlpool™ WHE-WSC Water Softener Cleanser, as directed, every four months from the date of purchase of the water softener.