hit counter script
NEC UNIVERGE NEAX 2000 IPS General Description Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Server
  5. UNIVERGE NEAX 2000 IPS
  6. General description manual
NEC UNIVERGE NEAX 2000 IPS General Description Manual

NEC UNIVERGE NEAX 2000 IPS General Description Manual

Family of products
Hide thumbs Also See for UNIVERGE NEAX 2000 IPS:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , Configuration Manual
19
U
NIVERGE
2000 IPS
NEAX
Family of Products

General Description

March, 2007
ISSUE 6
NEC Unified Solutions, Inc.

Advertisement

Table of Contents
loading

Related Manuals for NEC UNIVERGE NEAX 2000 IPS

Summary of Contents for NEC UNIVERGE NEAX 2000 IPS

  • Page 1: General Description

    NIVERGE 2000 IPS NEAX Family of Products General Description March, 2007 ISSUE 6 NEC Unified Solutions, Inc.
  • Page 2 NEC Unified Solutions, Inc. reserves the right to change the specifications, functions, or features, at any time, without notice. NEC Unified Solutions, Inc. has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Unified Solutions, Inc. and shall not be reproduced without prior written approval from NEC Unified Solutions, Inc.

  • Page 3: Table Of Contents

    REGULATORY INFORMATION ....................1 EGULATORY EQUIREMENTS ......................1 FCC P 15 R EQUIREMENTS ......................1 FCC P 68 R EGISTRATION ......................2 (DID) C IRECT NWARD IALING ALLS ....................5 EGULATORY NFORMATION NALOG ELEPHONES ..............5 EARING OMPATIBILITY ......................6 CS-03 ........................6 NDUSTRY ANADA AFETY ERTIFICATIONS ........................7 AFETY NSTRUCTIONS ........................8...
  • Page 4 NSTALLATION ..........................148 YSTEM DMINISTRATION ......................149 AINTENANCE ..........................150 MP P ROGRAM OWNLOAD ......................154 MA4000 M ANAGEMENT YSTEM ....................157 UNIVERGE NEAX 2000 IPS D OCUMENTATION ..............160 CHAPTER 7 SPECIFICATIONS ....................161 ROCESSORS ..........................161 OWER ............................166 YSTEM APACITY .........................168 IP R EMOTE ETWORK APACITY ....................174...

  • Page 5: Regulatory Information

    UNIVERGE NEAX 2000 IPS General Description Page 1 Issue 5...

  • Page 6: Fcc Part 68 Registration

    UNIVERGE 2000 IPS NEAX Complies With Part 68 FCC Rules FCC Registration Numbers Ringer Equivalence: 1.6B NEC Unified Solutions, Inc. MADE IN USA UNIVERGE NEAX 2000 IPS General Description Page 2 Issue 5...
  • Page 7 PN-DTA (PRT) 04DU9-1SN 6.0P PN-DTA (PRT) 04DU9-1ZN 6.0P PN-DTA (CCT) 04DU9-BN 6.0P PN-DTA (CCT) 04DU9-DN 6.0P PN-DTA (CCT) 04DU9-1KN 6.0P PN-DTA (CCT) 04DU9-1SN 6.0P PN-DTA (CCT) 04DU9-1ZN 6.0P PN-4BRT 02IS5 6.0Y UNIVERGE NEAX 2000 IPS General Description Page 3 Issue 5...
  • Page 8 REGULATORY INFORMATION Service Requirements In the event of equipment malfunction, all repairs will be performed by NEC or an authorized distributor. It is the responsibility of users requiring service to report the need for service to NEC or to one of their authorized distributors.

  • Page 9: Direct-Inward Dialing (Did) Calls

    Some of these laws incorporate strict penalties. Regulatory Information On Analog Telephones NEC single-line telephones comply with Part 68 of FCC Rules. On the bottom of the equipment is a label that states, among other information, the FCC registration number and ringer equivalence number (REN) for the equipment.

  • Page 10: Hearing Aid Compatibility

    NEC-type single-line telephone sets used in conjunction with the UNIVERGE 2000 NEAX IPS are hearing aid compatible. If other than NEC-type single-line telephone sets are to be used with this system, ensure that these are hearing aid compatible. Industry Canada CS-03 Certification number: 140 5976 A Load Number of the equipment: 1.0...

  • Page 11: Safety Certifications

    Never touch an uninsulated telephone wire or terminal, unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Note: More detailed precautions are included in this manual. UNIVERGE NEAX 2000 IPS General Description Page 7 Issue 5...

  • Page 12: Safety Instructions

    Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. UNIVERGE NEAX 2000 IPS General Description Page 8 Issue 5...
  • Page 13 This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme a la norme NMB-003 du Canada. UNIVERGE NEAX 2000 IPS General Description Page 9 Issue 5...

  • Page 14: Chapter 1 Introduction

    Dterm Series i telephone features. On the WAN side, the system can provide peer-to-peer connections over IP networks with the voice compression, on a CCIS basis (CCIS over IP) or Remote PIM (Remote PIM over IP). UNIVERGE 2000 IPS NEAX UNIVERGE NEAX 2000 IPS General Description Page 10 Issue 5...
  • Page 15 Dterm MATWorX Server Assistant Server (via LAN) DtermIP Remote PIM over IP with Survivability DtermIP WLAN Handset Dterm SP30 Dterm Client PC INASET Figure 1-1 System Outline of an IPS UNIVERGE NEAX 2000 IPS General Description Page 11 Issue 5...

  • Page 16: Hardware Architecture

    Line & Trunk Cards PZ-M606-A Application Processors PN-24IPLA IP PAD* Firmware Processors * The PN-24IPLA is a daughter board for the 8IPLA when up to 32 IP PADs for desired. UNIVERGE NEAX 2000 IPS General Description Page 12 Issue 5...
  • Page 17 To meet the specific needs of the customer’s environment, the UNIVERGE 2000 IPS NEAX provides the following installation methods: Floor Standing Installation Wall-mounting Installation IEC standard 19 inch Rack-mounting Installation UNIVERGE NEAX 2000 IPS General Description Page 13 Issue 5...
  • Page 18 Remote PIM. When the IP network/main PBX recovers, the Remote PIM can be restored to normal mode with a system initialization by manual operation or automatically (Selectable by system data setting). • IPS Remote PIM with CP24-D MP • IPS with CP31-D MP UNIVERGE NEAX 2000 IPS General Description Page 14 Issue 5...

  • Page 19: Software Architecture

    MP. (Dual MPs are configured with the same serial number) Generic Program (Basic System Software) Description Remarks Basic Business/Hotel/Motel Features for: 64 LT Ports, 5 T1/DCH, 48 ISDN-BRI Trunks. 64 Port System Software NEC Customer Software License Agreement Required UNIVERGE NEAX 2000 IPS General Description Page 15 Issue 5...
  • Page 20 Phone and can support either Business or ACD mode. SP-30-4 ACD Seat License The SP30/SP30 ACD Soft-Phone also requires IP Seat License. To support eight simultaneous soft-phone sessions would require eight Soft-Phone Licenses plus 8 IP Seat Licenses. UNIVERGE NEAX 2000 IPS General Description Page 16 Issue 5...

  • Page 21: Technical Terms

    Ethernet Control Card TDSW Time Division Switch Tone/Music Source EXPMEM Memory Expansion Card Interface Card ISDN-channel Handler Card CODEC Card ISDN Line Circuit Card Voice Mail Card IP Trunk Card External Key UNIVERGE NEAX 2000 IPS General Description Page 17 Issue 5...

  • Page 22: Trunking Diagram

    CHAPTER 1 INTRODUCTION Trunking Diagram This figure shows a typical trunking diagram of the UNIVERGE 2000 IPS system. NEAX UNIVERGE NEAX 2000 IPS General Description Page 18 Issue 5...

  • Page 23: Univerge Neax 2000 Ips

    2000 IPS is not available for the IPS NEAX Installation Methods The UNIVERGE can be installed on the desktop or into the 19-inch rack. Wall NEAX Mount Installation is not available. UNIVERGE NEAX 2000 IPS General Description Page 19 Issue 5...

  • Page 24: Univerge Neax

    This feature can reduce the bandwidth used on the WAN that is connected to CO lines at • Remote Site, rather than DtermIP at remote location or the Media Converter (MC) accommodation. UNIVERGE NEAX 2000 IPS General Description Page 20 Issue 5...

  • Page 25: Remote Pim Over Ip

    No MN Alarm Indication • Network Conditions and Payload Item Requirement Remarks Protocol TCP/IP transparent Support the quality 120ms(one way)/240ms(return) Maximum class A, B of IP Delay Time 150ms(one way)/300ms(return) Telephone UNIVERGE NEAX 2000 IPS General Description Page 21 Issue 5...
  • Page 26 T1. Peer-to Peer IP station calls over Asymmetrical networks such as ADSL may realize higher bandwidth utilization, compression can be specified by location numbers in system data. UNIVERGE NEAX 2000 IPS General Description Page 22 Issue 5...
  • Page 27 7. When unstable conditions occur in the network, the Remote Site can be manually set to survivable mode (override automatic) until stability in the network is established. This prevents the Remote Site from resetting normal mode to survivable mode etc. UNIVERGE NEAX 2000 IPS General Description Page 23 Issue 5...
  • Page 28 Equipment Name Remarks PZ-M606-A On board Ethernet Interface card SPN-8IPLA IP PAD 8 Port PAD with built-in compression PZ-24IPLA 24 Port PAD Expansion, mounts on SPN-8IPLA Registration “not” required Note: UNIVERGE NEAX 2000 IPS General Description Page 24 Issue 5...

  • Page 29: Chapter 2 System Configuration

    IPs + 192 LT ports + 508 D IPs + 64 IP-PADs 128 Wireless + 64 IP-PADs 128 Wireless + 128 PTP CCIS 128 PTP CCIS Physical PIM Virtual PIM UNIVERGE NEAX 2000 IPS General Description Page 25 Issue 5...
  • Page 30 512 LT ports term term term term + 696 D + 632 D + 568 D + 504 D Physical PIM Virtual PIM Figure 2-2 System Configuration with DtermIP (1020-Port Configuration) UNIVERGE NEAX 2000 IPS General Description Page 26 Issue 5...

  • Page 31: Installation Methods

    PIM #0 PIM #4 PIM #0 PIM #4 BASE BASE BASE BASE BASE BASE BASE BASE (320 ports) (384 ports) (448 ports) (512 ports) Figure 2-2 System Configuration in Floor-standing Installation UNIVERGE NEAX 2000 IPS General Description Page 27 Issue 5...
  • Page 32 CHAPTER 2 SYSTEM CONFIGURATION Wall-mounting Installation The UNIVERGE 2000 IPS can be wall-mounted with single or multiple PIM NEAX configurations (maximum of eight PIMs). Figure 2-3 Wall-mounting Installation UNIVERGE NEAX 2000 IPS General Description Page 28 Issue 5...
  • Page 33 19 inch Rack-mounting Installation The UNIVERGE 2000 IPS can be mounted in the IEC-standard 19 inch rack up to four NEAX PIMs. (IEC: International Electro-technical Commission) Figure 2-4 19-inch Rack-mounting Installation UNIVERGE NEAX 2000 IPS General Description Page 29 Issue 5...

  • Page 34: Modules And Installation Hardware

    Dual MP System: PIM 1 – PIM 7 Single MP System: Not used PIMMK SN1730 PIMMK Dual MP System: PIM 0 BATTMH SN1731 BATTMH 1 per STACK, Max.2 per system UNIVERGE NEAX 2000 IPS General Description Page 30 Issue 5...
  • Page 35 1/STACK 19 INCH RACK BRACKET (B) (19 inch Rack-mounting Installation) Mounting Bracket MOUNTING BRACKET OPTION (1/STACK) I/F Bracket I/F BRACKET ASSEM OPTION (1/SYSTEM) Base Tray BASE TRAY ASSEM OPTION (1/STACK) UNIVERGE NEAX 2000 IPS General Description Page 31 Issue 5...
  • Page 36 Backup time is approx. 3 hours when PHS (Wireless PS) is not accommodated and approx. 2 hours when PHS (Wireless PS) is accommodated in the system. The batteries are varied depending on the requested backup time. The battery shall be locally provided. UNIVERGE NEAX 2000 IPS General Description Page 32 Issue 5...

  • Page 37: Circuit Cards

    Line/Trunk (LT) Cards • IP PAD, Line Circuit (LC), Central Office Trunk (COT), Tie Line Trunk (LDT/ODT), etc. Application Processor (AP) Cards • SMDR/PMS/CIS/Hotel Printer Interface (AP00) T1/E1 Digital Trunk Interface (DTI) UNIVERGE NEAX 2000 IPS General Description Page 33 Issue 5...

  • Page 38: Ips S C

    For voice compression, the 4VCT card is required. For Legacy terminal connection via the IP network with H.323 protocol, the IPT card is required. For voice compression, the 4VCT card is required. UNIVERGE NEAX 2000 IPS General Description Page 34 Issue 5...
  • Page 39 Connection via the Intranet is only supported. • For Voice over IP (H.323), a H.323 Gatekeeper is required for converting between IP • address and station number. The IP trunk provides only Point-to-Point connection. • UNIVERGE NEAX 2000 IPS General Description Page 35 Issue 5...
  • Page 40 In the voice communication via the Internet, the connection and communication • delay may occur and the voice quality may deteriorate. The Virtual IPT and IPT card does not support Dynamic Host Configuration Protocol • (DHCP) service. UNIVERGE NEAX 2000 IPS General Description Page 36 Issue 5...
  • Page 41 PAD-B.) 8IPLA does not support T.30 FAX. (T.30 FAX requires the 32IPLA-A) When providing the T.30 FAX communication the PN-32IPLA-A IP PAD-D/E card and the PN-16VCTAA IP PAD-B are required. UNIVERGE NEAX 2000 IPS General Description Page 37 Issue 5...

  • Page 42: Ips Ips

    The port capacity of the Virtual MC is different depends on the number of Physical MC. The port allocation varies with the version of system. Software Port Allocation for Each Physical MC Configuration UNIVERGE NEAX 2000 IPS General Description Page 38 Issue 5...
  • Page 43 CHAPTER 2 SYSTEM CONFIGURATION UNIVERGE NEAX 2000 IPS General Description Page 39 Issue 5...
  • Page 44 CHAPTER 2 SYSTEM CONFIGURATION UNIVERGE NEAX 2000 IPS General Description Page 40 Issue 5...

  • Page 45: Dmr

    CPU, the following options that are built-in on the CP24 are not available with the CP31: No built-in DAT. • Only one RS Port. • No built-in DK (external/relay key). • No MN Alarm Indication • UNIVERGE NEAX 2000 IPS General Description Page 41 Issue 5...
  • Page 46 MC-1 LT ports LT ports 8 Virtual 8 Virtual MC-0 MC-0 LT ports LT ports LT ports LT ports 256 AP Ports/system 256 AP Ports/system MODULAR CHASSIS Software Port Allocation UNIVERGE NEAX 2000 IPS General Description Page 42 Issue 5...

  • Page 47: Remote Pim Over Ip System Outline

    This feature displays the link state between Main Site and Remote Site on the • designated Dterm or DtermIP at both sites, and allows users at both sites to notice the link failure. UNIVERGE NEAX 2000 IPS General Description Page 43 Issue 5...

  • Page 48: Remote Pim Over Ip System Conditions

    If the network is short of the requirement, it may cause the delay operation of system, the delay and deterioration of voice packets, disconnection of calls, and frequent changeover to survival mode at Remote Site. UNIVERGE NEAX 2000 IPS General Description Page 44 Issue 5...
  • Page 49 The number of ports accommodated at one Remote Site should be a maximum of • 256. This is the sum of maximum 128 physical ports (one built-in FP), maximum 128 IP ports (two Virtual FP), and AP ports such as ISDN, etc. UNIVERGE NEAX 2000 IPS General Description Page 45 Issue 5...
  • Page 50 - All services using MP built-in DK or DK card are not available. - MP built-in DAT and Digital Announcement Trunk (DAT) card are not available. - RS Port No.1 is not available with CP31-D. UNIVERGE NEAX 2000 IPS General Description Page 46 Issue 5...
  • Page 51 The MJ/MN alarm indications are not available at Remote Site. If a fault occurs at • Remote Site, the fault is notified to the Main Site and MJ/MN alarm is indicated at the Main Site. UNIVERGE NEAX 2000 IPS General Description Page 47 Issue 5...
  • Page 52 When the link between Main Site and Remote Site recovers and the Remote Site starts subordinate operation to the Main Site (normal mode), the flashing lamp of the button goes out. UNIVERGE NEAX 2000 IPS General Description Page 48 Issue 5...

  • Page 53: Chapter 3 Terminals

    60 Console Add-On Module/DSS/BLF Dterm Cordless Terminals Dterm Cordless II Dterm Cordless Lite II Dterm Headset Cordless II Plantronics CT Cordless PS - Wireless Handset Dterm SP30 (IP Soft Phone) INASET UNIVERGE NEAX 2000 IPS General Description Page 49 Issue 5...

  • Page 54: Sn716 Desk Con

    1000 ft. (304 m) AC Adapter PN-PW00 1000 ft. (304 m) PN-4DLCM/4DLCQ AC Adapter 4000 ft. (1200 m) *Cable length is based on the diameter of the cable and the terminal impedance. UNIVERGE NEAX 2000 IPS General Description Page 50 Issue 5...
  • Page 55 Attendant Delay Announcement Audible Indication Control Attendant Lockout Call Processing Indication Attendant Overflow Call Queuing Attendant Override Call Splitting Note: For Detail of each feature refer to Chapter 9 Feature Description. UNIVERGE NEAX 2000 IPS General Description Page 51 Issue 5...
  • Page 56 Lamp arrive at the console. Allows the attendant to extend an Key & Start Start Basic outgoing call to a station. Completion of Lamp outgoing pulse will be recognized. UNIVERGE NEAX 2000 IPS General Description Page 52 Issue 5...
  • Page 57 Steady lamp indicates trouble conditions in the Alarm Alarm Basic PBX. Position Position When the attendant position (console) is Basic Lamp Available Available available to process calls, the lamp lights. UNIVERGE NEAX 2000 IPS General Description Page 53 Issue 5...
  • Page 58 Keys while calling a busy station: B.V—Busy Verification Keys while calling a DND station: DDOVR—DND override Keys while accessing Hotel feature: RC—Room Cut off MW—Message Waiting DD—Do not Disturb WU—Wake up call RESET—Reset UNIVERGE NEAX 2000 IPS General Description Page 54 Issue 5...

  • Page 59: Dterm Series I Analog Terminals

    Ring/Handset Receive Volume. Fully modular with Built-in Wall Mount Unit, Flash Key, Mute DTH-1-1 (BK) TEL Key, Handset Cord, Message Waiting, Redial Key, three different Ring Tones, Volume Control UNIVERGE NEAX 2000 IPS General Description Page 55 Issue 5...
  • Page 60 Speakerphone, etc., located on back of telephone Wall-Mount Unit Built-in Electrostatic Discharge Can Withstand +/- 20kv Discharge c-UL (Ul 60950 3rd Edition) FCC part 15, 68, Approvals IC (Industry Canada) UNIVERGE NEAX 2000 IPS General Description Page 56 Issue 5...

  • Page 61: Dterm Series I (Ip) Terminals

    DtermIP terminals are class B devices and comply with U.S. FCC regulations for office and residential use as well as the Canadian Inference-causing Equipment Regulations. 8-Button Display 16-Button Display 32-Button Display 16-Button LD UNIVERGE NEAX 2000 IPS General Description Page 57 Issue 5...
  • Page 62 32 Line/Feature Access/ Programmable Feature Access Keys 11 Dedicated Function Keys: Feature, Recall, Conference, Redial, Hold, Transfer, Answer, Speaker, Microphone, Directory, Message 4 Local Soft Keys Controls (detail functions are dependent on PBX) UNIVERGE NEAX 2000 IPS General Description Page 58 Issue 5...
  • Page 63 Built-in Wall Mount All Models: Yes Built-in Headset Jack Dterm 8, 16, 16LD, 32 models only Housing Color: Black All Models: Yes Housing Color: White Dterm 8, 16, 16LD, 32 models only UNIVERGE NEAX 2000 IPS General Description Page 59 Issue 5...
  • Page 64 Tilt up: 9.09" x 9.88" x 5.28" Tilt down: 9.09" x 9.88" x 4.17" DtermIP 16LD Weight: 2.91lbs Tilt up: 9.09" x 9.57" x 5.28" Tilt down: 9.09" x 9.57" x 4.17" DtermIP 32D Weight: 2.84lbs UNIVERGE NEAX 2000 IPS General Description Page 60 Issue 5...
  • Page 65 Voltage: 48V Current: 92ma Power Consumption: 6.4W Audio Algorithm: G.711, G.729A, G.723.1 Protocol Support: 802.3af and CDP (NDP with ILPA integration) 10/100 base T (IEEE 802.3), RJ 45 multi-port Switch UNIVERGE NEAX 2000 IPS General Description Page 61 Issue 5...

  • Page 66: Dterm Series I (Tdm) Digital Terminals

    All Dterm Series i telephones are Class B devices and comply with U.S. FCC regulations for office and residential use, and with requirements of the Canadian Interference-Causing Equipment Regulations. 2-Button Non-Display 8-Button Non-Display UNIVERGE NEAX 2000 IPS General Description Page 62 Issue 5...
  • Page 67 CHAPTER 3 TERMINALS 8-Button Display 16-Button Display 32-Button Display 60-Line DSS/BLF Console 4-Button Display UNIVERGE NEAX 2000 IPS General Description Page 63 Issue 5...
  • Page 68 - AP(A): Analog TEL connection without Ringing Signal Generation or Disconnect Signal - AD(A): Tape-recorder connection - CT(A): CTI Adapter, RS-232-C (9-pin) interface - IP-R: VoIP Adapter Note 1: Not available with DTR-2DT and DTR-4D terminals. UNIVERGE NEAX 2000 IPS General Description Page 64 Issue 5...
  • Page 69 The large LCD display of the 16LD-ADM allows quick and easy identification of associated buttons. The 16 buttons on each of the expansion modules can be programmed as speed dial keys or a directory number. UNIVERGE NEAX 2000 IPS General Description Page 65 Issue 5...
  • Page 70 LAN or an IP network device such as a router, DSL modem or cable modem. Requires an AC-R ADP. AC-R Unit AC adapter for DSS/BLF Console, AP(A), AP(R), or IP-R Unit UNIVERGE NEAX 2000 IPS General Description Page 66 Issue 5...
  • Page 71 Note 2: When using 8DLC card, it is not available for long line function, even if it is equipped with AC Adapter. Note 3: The DSS/BLF Console requires local AC/DC supply. Note 4: DTR-2DT and DTR-4D terminals do not support long line adapters. UNIVERGE NEAX 2000 IPS General Description Page 67 Issue 5...

  • Page 72: Dterm Seriese (Tdm) Digital Terminals

    Multiline Terminal, functions of the soft keys are displayed in the third line on the LCD. If the status of the Multiline Terminal changes, the soft keys displayed will change automatically. UNIVERGE NEAX 2000 IPS General Description Page 68 Issue 5...
  • Page 73 CHAPTER 3 TERMINALS Dterm Series E Terminals 8-Line Non-Display 8-Line Display 16-Line Display 32-Line Display 60-Line DSS/BLF/Add-On Module UNIVERGE NEAX 2000 IPS General Description Page 69 Issue 5...
  • Page 74 This terminal is available in Black (BK) or White (WH). 60-Line DSS/BLF/Add-On Module 60 programmable line keys (each with a two-color LED) This terminal is available in Black (BK) or White (WH). UNIVERGE NEAX 2000 IPS General Description Page 70 Issue 5...
  • Page 75 ADA-U (Ancillary Device Adapter) APR-U (Analog Port Adapter with Ringing) HFU-U (External Handsfree Unit) ACA-U (AC Adapter Unit) WMU-U (External Wall mount Unit) WMU-W (External Wall mount Unit for DTP-2 Terminals) UNIVERGE NEAX 2000 IPS General Description Page 71 Issue 5...
  • Page 76 Dterm Series E display phones. IPW-2U (P-P) With this adapter, you can upgrade the 8, 16, 32-button Dterm Series E terminals to VoIP when using Peer to Peer connection. UNIVERGE NEAX 2000 IPS General Description Page 72 Issue 5...
  • Page 77 Note 3: When using 8DLC card, it is not available for long line function, even if it is equipped with AC Adapter. Note 4: The DSS/BLF Console requires local AC/DC supply. UNIVERGE NEAX 2000 IPS General Description Page 73 Issue 5...

  • Page 78: Dterm Cordless Terminals

    Business is not lost because of callers being able to reach a live person. The NEC Cordless application is the ideal solution for those businesses that require mobility but do not want to invest in a full-blown wireless solution.
  • Page 79 Dterm Cordless II Telephone Features Advanced Digital Technology eliminates noise and provides an extended range. Direct interface to digital interface port on NEC telephone systems. Programmable Function Keys let you utilize features of your telephone system with the Dterm Cordless Multiline Terminal.
  • Page 80 Wall Mountable Separate Base Unit Wall Mountable Separate Charging Unit Easy Installation Compact Handset Design Use with an NEC Digital Multiline Terminal or as a stand-alone device Dterm Cordless Lite II Telephone Specifications General: Frequency Control: Phase Lock Loop Modulation: 900 MHz FM with ADPMC (digital) Operating Temperature: 0°...
  • Page 81 Dterm Headset Cordless II allows mobility and sound quality to handsfree conversations on your Dterm Series i TDM phone with an APR-R Adapter. This NEC cordless, along with an APR-R device, eliminates the need for a handset mechanical lifter. The Dterm Headset Cordless II and Series I with an APR-R allow you to conveniently and automatically answer calls with the touch of a button.

  • Page 82: Wireless Dterm Ps Handset

    No static or fading – audio quality indistinguishable from a desktop phone. • Small lightweight handset with long battery life. • Low power operation for compatibility in any environment. • Up to 512 PS Handsets • 216 PS Simultaneous Connections • UNIVERGE NEAX 2000 IPS General Description Page 78 Issue 5...
  • Page 83 4 line, 18 Digit LCD Display (with scrolling) • User-defined soft keys • And the provisioning of the Dterm PS data port facility to allow software updates protects your investment. UNIVERGE NEAX 2000 IPS General Description Page 79 Issue 5...
  • Page 84 Group Assistant is designed to manage and maintain Directory and Speed Dial entries for an entire workgroup. The PS Interface Cable connects to the PC serial port and to the Dterm PS interface port, on the bottom of the handset. UNIVERGE NEAX 2000 IPS General Description Page 80 Issue 5...

  • Page 85: Dterm Softphone (Sp30)

    Dterm SP30 provides an interface to Microsoft’s Telephony Application Programming Interface (TAPI) via NEC OpenWorX integration, allowing TAPI-enabled applications, such as Outlook and ACT, to make and receive calls. The Dterm SP30 has the ability to use a wireless handset (PS) for all voice connections instead of the USB handset.
  • Page 86 CHAPTER 3 TERMINALS UNIVERGE NEAX 2000 IPS General Description Page 82 Issue 5...
  • Page 87 Conferences do not require users to be Dterm SP30 users for voice only conference calls. Only Dterm SP30 users will utilize additional features like application sharing and messaging during call. UNIVERGE NEAX 2000 IPS General Description Page 83 Issue 5...
  • Page 88 When configuring the Dterm SP30 to a 2 line display, the display is able to switch (1 second intervals) between the normal 2 lines of display. UNIVERGE NEAX 2000 IPS General Description Page 84 Issue 5...
  • Page 89 In those case where there was no voicemail message was left, the user had no way of identifying whether calls were received or not. Users can confirm visual that a call was received and immediately reply to the caller when they become available. UNIVERGE NEAX 2000 IPS General Description Page 85 Issue 5...
  • Page 90 CHAPTER 3 TERMINALS Application Collaboration: The NEC Dterm SP30 allows users to share ideas, information and programs in a variety of ways while either in a point-to-point connection or 6/8 party conference mode. Videoconferencing - The Dterm SP30 audio and videoconferencing feature lets you communicate with anyone on the NEC Network.

  • Page 91: Inaset Tm

    IP network. The INASET is Dynamic Host Configuration Protocol (DHCP) compatible and doesn’t require the need to be co-located with the UNIVERGE NEAX equipment. INASET supports G.711, G.729a and G.723.1 audio compression for low-bandwidth requirements. UNIVERGE NEAX 2000 IPS General Description Page 87 Issue 5...
  • Page 92 The INASET 320G has a 5.1” LCD with gray scale display and 32 programmable keys. Supports Power over ITR-320G-1 (BK) Ethernet (POE) (802.3af and Cisco Discovery Protocol). Available in black only UNIVERGE NEAX 2000 IPS General Description Page 88 Issue 5...
  • Page 93 • Direct powering with external wall-plug adapter PBX System Requirements UNIVERGE 2000 IPS R6.1or higher • NEAX • IPPAD Card • 8 Seat Licenses: Supports up to 8 INASET terminals UNIVERGE NEAX 2000 IPS General Description Page 89 Issue 5...

  • Page 94: Chapter 4 Equipment Description

    Houses two pairs of batteries for protection from long power interruption (for 3 hours). Modular Chassis (MC) with Ringer. Each MC SN-1737 IPSMJ supports 56 physical ports (7 LT/AP card slots). UNIVERGE NEAX 2000 IPS General Description Page 90 Issue 5...

  • Page 95: Installation Hardware

    Installation of Stationary Equipment. RACK MOUNT KIT (U) For DM (E) Modular Chassis - Two 19” rack-mounting ears, quantity two 1” ears. One set is included with System Package and each Expansion Module. UNIVERGE NEAX 2000 IPS General Description Page 91 Issue 5...

  • Page 96: System Power

    For DM (E) Modular Chassis - Ring Generator Unit (RGU) mounts on top of the PZ-PW131. One is included in each PIMMJ. PW139 PZ-PW139 Ring Voltage: 85/75Vac; Ring Current: 0.05A UNIVERGE NEAX 2000 IPS General Description Page 92 Issue 5...

  • Page 97: Common Control Cards

    BUS interface functions as a driver/receiver of various signals, adjusts gate delay timing and cable delay timing, monitors I/O Bus and PCM BUS, MP Program Download (FTP). One card is required per system. UNIVERGE NEAX 2000 IPS General Description Page 93 Issue 5...
  • Page 98 I/O Bus and PCM BUS. When the system consists of three MCs or more, one each of this card is mounted respectively in the MP slot of MC2, MC4, and MC6. UNIVERGE NEAX 2000 IPS General Description Page 94 Issue 5...

  • Page 99: Line/Trunk (Lt) Cards

    [–27 V version, 2-wire type] PN-4DLCT 4 Circuit Digital Line Card (-48V), used for Dterm Series E and Series i Terminals. PZ-PW122 Power Supply Required to provide Long Line function. UNIVERGE NEAX 2000 IPS General Description Page 95 Issue 5...
  • Page 100 Legacy Line/Trunk Interface. And Provides voice compression DSP control functions such as voice compression control, DTMF relay same as IP-PAD (PN-8IPLA) card. Used to expand the IP-PAD channel up to 32- channels. UNIVERGE NEAX 2000 IPS General Description Page 96 Issue 5...
  • Page 101 To be mounted in PFT slot of PIM. One card per PIM. PZ-4PFTA 4 Circuit Power Fail Transfer (PFT). Mounts in each IPS DM (E) IPSMJ (includes mounting hardware and POWER CA-PFT.) UNIVERGE NEAX 2000 IPS General Description Page 97 Issue 5...

  • Page 102: Application Processor (Ap) Cards

    ETS 300 172 by ETSI at the Q reference point between PBX’s SPN-CFTC 32 Party Digital Conference (Group Call/Meet Me) • Group Call Automatic • Group Call Broad Cast • Group Call Two Way Calling UNIVERGE NEAX 2000 IPS General Description Page 98 Issue 5...
  • Page 103 Note 1: The Expansion Memory is the on-board sub-memory card for the AP00-B. It provides additional memory capacity. System Capacity w/o EXPMEM with EXPMEM (SMDR call record) SPN-AP00B MRC-C(AP) 1600 27000 SPN-AP00B MRC-H(AP) 2620 23580 UNIVERGE NEAX 2000 IPS General Description Page 99 Issue 5...
  • Page 104 Expands number of Wireless PS handsets to 512. SPN-SC01 DCH-Q DCH Card for Wireless Roaming (Q.931.a) 1 Card per system. Installed With PN-24DTA-A / 30DTC. AP Number 4-15 & 20-31 Lower AP Hwy UNIVERGE NEAX 2000 IPS General Description Page 100 Issue 5...

  • Page 105: Chapter 5 Feature Description

    • An incoming DID line/Tie line call has been terminated to a station and encounters a busy or no answer condition • Internal Recorded Message in place of Music on Hold • Night Announcement UNIVERGE NEAX 2000 IPS General Description Page 101 Issue 5...
  • Page 106 The Attendant has the ability to enter and remove individual stations from Do Not Disturb (DND). Additionally, the Attendant can set one preassigned group of stations into, or out of, Do Not Disturb. UNIVERGE NEAX 2000 IPS General Description Page 102 Issue 5...
  • Page 107 This feature allows the Attendant to confer privately with one party on an Attendant handled connection without the other party overhearing. Call Waiting Display This feature provides a visual indication to the Attendant when one or more calls are waiting to be answered. UNIVERGE NEAX 2000 IPS General Description Page 103 Issue 5...
  • Page 108 Unsupervised Trunk-to-Trunk Transfer By Attendant This feature allows an Attendant to transfer an incoming or outgoing call on one trunk to an outgoing trunk and exit the connection before the called party answers. UNIVERGE NEAX 2000 IPS General Description Page 104 Issue 5...
  • Page 109 This feature allows the system to provide a recorded announcement to an incoming caller placed in queue to an ACD group. A single announcement, or two separate announcements, can be provided. UNIVERGE NEAX 2000 IPS General Description Page 105 Issue 5...
  • Page 110 This feature works as a timed reminder. When a call remains on Hold, Camp-On or ringing unanswered for a fixed interval after being transferred, the station that initiated the hold, transfer, or Camp-On is automatically alerted. UNIVERGE NEAX 2000 IPS General Description Page 106 Issue 5...
  • Page 111 In case of Call Back no answer, the Call Back to the setting station is initiated immediately after the called station goes on hook after making a call or accessing a feature. UNIVERGE NEAX 2000 IPS General Description Page 107...
  • Page 112 When a forwarded call is rerouted to a station that has also set a Call Forward, the call can be forwarded to another station. A call can be forwarded up to a maximum of five times, as specified in system programming. UNIVERGE NEAX 2000 IPS General Description Page 108 Issue 5...
  • Page 113 When a call is parked by Call Park - Tenant, the call can be retrieved from Call Park-Tenant by any station within the tenant from which the call was originally parked. UNIVERGE NEAX 2000 IPS General Description Page 109 Issue 5...
  • Page 114 Terminal, the calling party's information can be confirmed by the indications on the LCD. When a station is in conversation and the CID display key is pressed, the following information will be displayed on the lower line of the LCD. UNIVERGE NEAX 2000 IPS General Description Page 110 Issue 5...
  • Page 115 This feature provides a station user the ability to add-on another party (trunk or station) to a call already in progress. Single Line Telephone users can add up to one additional party and Multiline Terminal users can add up to two additional parties. UNIVERGE NEAX 2000 IPS General Description Page 111 Issue 5...
  • Page 116 This feature permits a station user to hold any incoming or outgoing CO call, tie line call, or any intra-office call while originating a call to another station user within the system. UNIVERGE NEAX 2000 IPS General Description Page 112...
  • Page 117 Direct Digital Interface This service feature provides the capability to connect trunks from the UNIVERGE 2000 NEAX IPS directly to T1 carrier links using either a private or public network. UNIVERGE NEAX 2000 IPS General Description Page 113 Issue 5...
  • Page 118 Do Not Disturb - Set/Cancel/Status Display • Automatic Wake Up No Answer - Status Display/Cancel • Agent Busy Out - UCD - Status Display • Line Lockout - Status Display • Room Cutoff - Set/Cancel/Status UNIVERGE NEAX 2000 IPS General Description Page 114 Issue 5...
  • Page 119 Do Not Disturb in a day (the time is programmable by the system). The timetable can be assigned for day of the week. The different timetable can also be assigned for specific dates of the year. UNIVERGE NEAX 2000 IPS General Description Page 115 Issue 5...
  • Page 120 This feature allows a station user or attendant dial-access to local voice paging equipment and connects both parties automatically after the paged party has answered the page by dialing an access code. UNIVERGE NEAX 2000 IPS General Description Page 116 Issue 5...
  • Page 121 Multiline Terminal. The user may continue talking on the handset at the same time. Hands-free Answerback This feature allows the station user to answer a voice call without lifting the handset. UNIVERGE NEAX 2000 IPS General Description Page 117 Issue 5...
  • Page 122 This feature allows selected stations to reach the Attendant simply by going off-hook. Individual Attendant Access This feature permits a user to call a specific Attendant by dialing an Attendant call code. UNIVERGE NEAX 2000 IPS General Description Page 118 Issue 5...
  • Page 123 And, the IP Enabled Dterm also communicates with legacy stations and trunks (TDM based) via IPPAD (IP Packet Assembler/Disassembler). The IP Enabled Dterm provides users with all features currently available in Dterm Series E/Series i terminals. UNIVERGE NEAX 2000 IPS General Description Page 119 Issue 5...
  • Page 124 Waiting lamp of the corresponding station. 4. The VMS, upon receiving retrieved message information, will send the Message Waiting lamp control data requesting the system to extinguish the Message Waiting lamp of the corresponding station. UNIVERGE NEAX 2000 IPS General Description Page 120 Issue 5...
  • Page 125 CCSA Lines Code Calling Equipment, Dictation Equipment, Foreign Exchange (FX) Lines, Radio Paging Equipment, and Wide Area Telephone Service (WATS) lines. Refer to separate features, Direct Inward Dialing (DID), and Tie Line Access for more applications of Miscellaneous Trunk Access. UNIVERGE NEAX 2000 IPS General Description Page 121 Issue 5...
  • Page 126 MP upgrade program from FTP server using MATWorX IPS. Immediate or scheduled changeover to the upgrade program is available. It is also possible to change back to the previous program that was in use before the changeover (changeback). UNIVERGE NEAX 2000 IPS General Description Page 122 Issue 5...
  • Page 127 This feature allows selected stations to activate a change from day mode to night mode by dialing a special code. Day/Night Mode Change by System Clock This feature provides automatic activation of Day/Night Mode Change by using System Clock. UNIVERGE NEAX 2000 IPS General Description Page 123 Issue 5...
  • Page 128 Periodic Time Indication Tone This feature provides a periodic tone to the station user who has made an outgoing call. This feature can be allowed or denied for each station. UNIVERGE NEAX 2000 IPS General Description Page 124 Issue 5...
  • Page 129 • Dterm Series E • IPK/Electra Elite Automatic Idle Return This feature returns a station to the idle state after 3 seconds of reorder tone is received due to the distant end disconnecting. UNIVERGE NEAX 2000 IPS General Description Page 125 Issue 5...
  • Page 130 By pressing the mute key again, the mute status returns to original conversation. My Line Number Display This feature enables a Multiline Terminal to display My Line (Primary Extension) number on the LCD during the Multiline Terminal in idle state. UNIVERGE NEAX 2000 IPS General Description Page 126 Issue 5...
  • Page 131 The Volume Control keys are located on the lower front side of Multiline Terminals (UP and DOWN). Remote Hold This feature allows a Multiline Terminal user to hold it on the line button of transferred terminal, by pressing the Hold key. UNIVERGE NEAX 2000 IPS General Description Page 127 Issue 5...
  • Page 132 Save and Repeat This feature allows a Multiline Terminal to save a specific dialed number and then redial that number at a later time. UNIVERGE NEAX 2000 IPS General Description Page 128 Issue 5...
  • Page 133 Station Hunting - Secretarial is initiated when a busy secretarial station in a Station Hunting - Circular group or Station Hunting - Terminal group is reached. UNIVERGE NEAX 2000 IPS General Description Page 129 Issue 5...
  • Page 134 System Clock Setup by Station Dialing This feature enables a Station User to set up the System Clock, from Single Line Telephone, Multi-line Terminal, and PS. UNIVERGE NEAX 2000 IPS General Description Page 130 Issue 5...
  • Page 135 For this feature, trunks must be assigned to the line keys on the Multiline Terminal. Incoming calls on CO lines can be answered on the appropriate trunk line appearance. UNIVERGE NEAX 2000 IPS General Description Page 131 Issue 5...
  • Page 136 On incoming DID/Tie line calls, the system can be assigned a threshold that limits the number of calls in queue. When the queue size threshold is exceeded, incoming callers are connected to busy tone. UNIVERGE NEAX 2000 IPS General Description Page 132 Issue 5...
  • Page 137 VMS. Voice over IP - (H.323) Voice over IP allows the system to transmit voice conversations over a corporate Intranet using ITUT H.323 protocol. UNIVERGE NEAX 2000 IPS General Description Page 133 Issue 5...
  • Page 138 Access Code, the secretary station can voice override the conversation between the boss and another party (station or trunk). When the conversation is interrupted, the boss can hear the secretary but the other party is unaware of the Voice Override. UNIVERGE NEAX 2000 IPS General Description Page 134 Issue 5...

  • Page 139: Ccis Features

    This feature allows calls to an inoperative number, through a CCIS trunk, to be intercepted and automatically routed to a recorded announcement informing the caller that an inoperative number was dialed and giving the Listed Directory Number for information. UNIVERGE NEAX 2000 IPS General Description Page 135 Issue 5...
  • Page 140 LAN and WAN. For connections between legacy terminals, voice signals are transmitted via IP-PADs. This connection is also available when the distant systems are 2400 IPX supporting peer-to-peer connections. UNIVERGE NEAX 2000 IPS General Description Page 136 Issue 5...
  • Page 141 This service feature provides the Attendant with a visual indication of incoming and outgoing trunk calls during an attendant-to-trunk connection within the CCIS network. Trunk Group number and trunk identification code are displayed. UNIVERGE NEAX 2000 IPS General Description Page 137 Issue 5...
  • Page 142 Link Alarm Display - CCIS This feature provides an indication on external equipment when the CCIS link is connected/disconnected, when the system is initialized, or when the CCH is in make-busy. UNIVERGE NEAX 2000 IPS General Description Page 138 Issue 5...
  • Page 143 As soon as a CCIS trunk becomes available, stations in the queue will be called back on a first-come, first-served basis. UNIVERGE NEAX 2000 IPS General Description Page 139 Issue 5...
  • Page 144 Multiline Terminal in another office. This path is established from the calling party to the called party’s built-in speaker. If the called party’s MIC lamp is on, the called party can have a conversation in hands-free. UNIVERGE NEAX 2000 IPS General Description Page 140 Issue 5...
  • Page 145 IPS offices need to have R12.1 software installed. Voice Mail Private Password - CCIS Voice Mail Password can be prevented from displaying in LCD of Multiline Terminals when connected to the voice mail system via CCIS. UNIVERGE NEAX 2000 IPS General Description Page 141 Issue 5...

  • Page 146: Isdn Features

    (WATS) network, as well as WATS from other carriers, can be used. ® MEGACOM 800 Service/800 WATS Ultra WATS ® AT&T’s MEGACOM 800 (Inward WATS) network, as well as 800 WATS provided by other carriers, can be used. UNIVERGE NEAX 2000 IPS General Description Page 142 Issue 5...
  • Page 147 Q-SIG Circuit Switched Basic Call – ETSI Version Q-SIG conforms to ETS 300 172. This feature enables NEC’s PBX to connect to NEC’s PBX or other manufacturer by using Layer 3 protocol for the signaling for the support of circuit mode bearer services at the Q reference point.

  • Page 148: Wireless Features

    PS station or MAT/CAT. CCIS Interface This feature allows the WCS to be integrated with NEC PBXs with CCIS interface. Calling Name Display - PS Without answering incoming calls or hold calls terminates to the PS, the calling party’s name can be confirmed by the indications on the LCD.
  • Page 149 PS user can originate or receive a call in any place of a network provided by multiple PBXs that communicate by JT-Q931a protocol over IP Trunks (IPT+VCT) or Peer to Peer Trunks. UNIVERGE NEAX 2000 IPS General Description Page 145...
  • Page 150 Point and SIP Handler and operates under the control of the virtual CS on the SIP Handler. Station-to-Station calls between WLAN stations and calls between WLAN stations and existing stations/trunks are available. UNIVERGE NEAX 2000 IPS General Description Page 146 Issue 5...

  • Page 151: Chapter 6 System Overview

    The attachment-plug receptacles in the vicinity of the PBX are all to be of a grounding type, and the equipment grounding conductors serving these receptacles are to be connected to earth ground at the service equipment. UNIVERGE NEAX 2000 IPS General Description Page 147 Issue 5...

  • Page 152: Ac Power Requirements

    Various installation Methods To meet the specific needs of the customer's environment, UNIVERGE 2000 IPS provides NEAX the following installation methods: Floor Standing Installation Wall-mounting Installation IEC standard 19 inch Rack-mounting Installation UNIVERGE NEAX 2000 IPS General Description Page 148 Issue 5...

  • Page 153: System Administration

    4. A line/trunk card (PN-AUCA/PN-DK00/ /PN-4DAT/PN-4RSTF/PN-4VCTI) is not assigned, even if mounted. 5. An application card is not assigned, even if mounted. 6. No tenant assignment is provided. (Tenant 01 is assigned) UNIVERGE NEAX 2000 IPS General Description Page 149 Issue 5...

  • Page 154: Maintenance

    If a password is forgotten, access to system programming will be limited and a system initialization with subsequent programming may be required. 8. When the Customer Administration Terminal is offline for programming, it cannot access normal terminal functions. UNIVERGE NEAX 2000 IPS General Description Page 150 Issue 5...
  • Page 155 Microsoft Word or Excel, directly from its Toolbar. Connecting to a PBX There are three ways to connect your PC to an NEC PBX: Use a modem to establish a dial-up connection. Use a serial cable to establish a direct connection.
  • Page 156 PBX. This list is referred to as a script, which can be saved and run at anytime. You can also use the MACH Script Editor to perform many other operations. UNIVERGE NEAX 2000 IPS General Description Page 152...
  • Page 157 Data assignment by device number (stations, trunks, and Attendant Console) Copying of station data from one station to other stations (when adding sequential stations in groups) Release / Reconnection of backup batteries Display of station line status UNIVERGE NEAX 2000 IPS General Description Page 153 Issue 5...

  • Page 158: Mp Program Download

    FTP servers can be used. Immediate or scheduled changeover to the upgrade program is available. It is also possible to change back to the previous program that was in use before the changeover (changeback). MP Download Process UNIVERGE NEAX 2000 IPS General Description Page 154 Issue 5...
  • Page 159 When using a single FTP server to update multiple sites in remote PIM network schedule the file transfer at least 7 minutes or more apart so that bandwidth and the number of connections to the FTP server are not exceeded. UNIVERGE NEAX 2000 IPS General Description Page 155 Issue 5...
  • Page 160 PC/Work station for FTP Professional Windows XP Professional (Internet Information Server (IIS) supplied with Note Windows 2000/XPProfessional can be used) Note: MATWorX and FTP server program can be used on the same PC. UNIVERGE NEAX 2000 IPS General Description Page 156 Issue 5...

  • Page 161: Ma4000 Management System

    Any HTTP 1.1 compliant Internet Explorer 5.5 or greater Input Device: Mouse & 101 Key Keyboard Mouse & 101 Key Keyboard Windows® 98 SE Windows 2000/XP with latest Operating System: Service Pack UNIVERGE NEAX 2000 IPS General Description Page 157 Issue 5...
  • Page 162 Service Pack latest Service Pack Microsoft® SQL MSDE with the Microsoft SQL 2000 Personal or Database: latest Service Pack Standard depending on the OS with the latest Service Pack UNIVERGE NEAX 2000 IPS General Description Page 158 Issue 5...
  • Page 163 Provides Microsoft SQL 2000 database CD with one MA4000 SQL 2000 Generic PKG folder containing Personal Edition and one folder containing Standard Edition 1 required when managing UNIVERGE NEAX 2000 IPS MA4000 IPS Manager Option Voice Servers 1 License is required for each IPS extension to be...

  • Page 164: Univerge Neax 2000 Ips Documentation List

    CHAPTER 6 INSTALLATION, PROGRAMMING, AND MAINTENANCE UNIVERGE 2000 IPS Documentation List NEAX NEC offers a full complement of documents for the UNIVERGE 2000 IPS product line. NEAX Technical documentation is available on Compact Disk (CD ROM) or on the WEB through NTAC On-Line.

  • Page 165: Chapter 7 Specifications

    (Flash ROM) (SDRAM) 32-Bit 16MB 64MB MP (PN-CP31-D) (ElanSC520) (Flash ROM) (SDRAM) FP (PN-CP15) 16-bit (25MHz) 768KB FP (PN-CP33) 16-bit (25MHz) 768KB 512KB AP (PN-AP00-B) 16-bit (8MHz) 512KB (Flash ROM) UNIVERGE NEAX 2000 IPS General Description Page 161 Issue 5...
  • Page 166 I/O Bus and PCM BUS. When the system consists of three MCs or more, one each of this card is mounted respectively in the MP slot of MC2, MC4, and MC6. UNIVERGE NEAX 2000 IPS General Description Page 162 Issue 5...
  • Page 167 In case of Dterm IP, the synthesized melody is provided built in to IP adapter. Note 3: MP Program Download (FTP) is for Stand Alone Systems Only (CP24D.) Note 4: No. 1 Port includes a built-in modem for a remote connection of the MAT. UNIVERGE NEAX 2000 IPS General Description Page 163 Issue 5...
  • Page 168 Refer to the Figure 4-2 on next page for the port allocation of the Time Division Switch. Note 2: In case of Dterm IP, the synthesized melody is provided built in to IP adapter. UNIVERGE NEAX 2000 IPS General Description Page 164 Issue 5...
  • Page 169 • Memory: Program Area (384 kb), Work Area (384 kb) • BS01 Function Name Code Remarks Firmware Processor Card used with the PN-CP15 2000 IPS. NEAX UNIVERGE Firmware Processor Card used with the PN-CP33 2000 IPS UNIVERGE NEAX UNIVERGE NEAX 2000 IPS General Description Page 165 Issue 5...

  • Page 170: Power

    On-hook conditions: 30 mega-ohms DC Resistance Off-hook conditions: 1,700 ohms On-hook conditions: 20 kilo-ohms (300 to 3,400Hz) Impedance 8 kilo-ohms (at 24Hz) Looped conditions: 600 ohms Leak Current 0 mA at on-hook conditions UNIVERGE NEAX 2000 IPS General Description Page 166 Issue 5...
  • Page 171 Attenuation rate: 12 dB per octave or more at 3.4 kHz above Signal Attenuation Attenuation level: -40 dBm or less at 3.4 kHz and above -70 dBm or less at 50 kHz and above UNIVERGE NEAX 2000 IPS General Description Page 167 Issue 5...

  • Page 172: System Capacity

    Note 4: The total number of trunk line and DTI channel shall be 256 or less. (Each trunk line and DTI channel are required to assign the “Trunk Number” by system data programming and maximum number of system parameter for “Trunk Number” is 256.) UNIVERGE NEAX 2000 IPS General Description Page 168 Issue 5...
  • Page 173 Name Display / Guest Name Display Speed Calling-Station (Station Speed Dial) Set 10000 MP built-in SMDR Call Record 1024 Note 5: It is possible to connect 4 applications at the same time. UNIVERGE NEAX 2000 IPS General Description Page 169 Issue 5...
  • Page 174 Note 4: The total number of trunk line and DTI channel shall be 256 or less. (Each trunk line and DTI channel are required to assign the “Trunk Number” by system data programming and maximum number of system parameter for “Trunk Number” is 256.) UNIVERGE NEAX 2000 IPS General Description Page 170 Issue 5...
  • Page 175 Name Display / Guest Name Display Speed Calling-Station (Station Speed Dial) Set 10000 MP built-in SMDR Call Record 1024 Note 5: It is possible to connect 4 applications at the same time. UNIVERGE NEAX 2000 IPS General Description Page 171 Issue 5...
  • Page 176 Note 3: The total number of trunk line and DTI channel shall be 256 or less. (Each trunk line and DTI channel are required to assign the “Trunk Number” by system data programming and maximum number of system parameter for “Trunk Number” is 256.) UNIVERGE NEAX 2000 IPS General Description Page 172 Issue 5...
  • Page 177 Name Display / Guest Name Display Speed Calling-Station (Station Speed Dial) Set 10000 MP built-in SMDR Call Record 1024 Note 4: It is possible to connect 4 applications at the same time. UNIVERGE NEAX 2000 IPS General Description Page 173 Issue 5...

  • Page 178: Ip Remote Network Capacity

    Authorization Code / Forced Account Code / 3000 Remote Access to System(DISA)Code Message Reminder Set 1024 Name Display / Guest Name Display Speed Calling-Station (Station Speed Dial) Set 10000 MP built-in SMDR Call Record 1024 UNIVERGE NEAX 2000 IPS General Description Page 174 Issue 5...
  • Page 179 8 to 32 using the 8IPLA w/24IPLA. Note 2: Message Waiting Indication available via Stutter Dial Tone. Note 3: Remote PIMs Support up to 2 Virtual PIMs for assignment of DtermIP/ INASET only. UNIVERGE NEAX 2000 IPS General Description Page 175 Issue 5...
  • Page 180 Central Office Trunk (Lines) DID w/4DIT 2W/4W E&M 1.5M 1.5M(PRT) ISDN 4BRT (card) PFT Connections Note 1: Remote PIMs Support up to 2 Virtual PIMs for assignment of DtermIP/ INASET only. UNIVERGE NEAX 2000 IPS General Description Page 176 Issue 5...
  • Page 181 12 Channel 10 Channel Payload size for Virtual IPT Max. Voice Channels Per IPT Payload Size G.729a G.711 G.723.1 10 ms. – 20 ms. – 30 ms. 40 ms. – UNIVERGE NEAX 2000 IPS General Description Page 177 Issue 5...

  • Page 182: Ip Specifications

    0 dB to +16 dB (+2 dB unit) Setting is available per Location 0 dB to –16 dB (–2 dB unit) PAD Control 0 dB to –16 dB For connection via the IPT card UNIVERGE NEAX 2000 IPS General Description Page 178 Issue 5...

  • Page 183: Univerge Neax Ips

    Cooling by FAN Safety Standard Complied with UL60950, CSA22.2 No. 950, EN60950, AS3260 Complied with VCCI Class A, FCC Part 15 Class A, EN55022 Class A, AS/NZS 3548 Class A UNIVERGE NEAX 2000 IPS General Description Page 179 Issue 5...

  • Page 184: Line Conditions

    Max. 3,950 meters Note 1: Cable length is based on cable with 0.5mm diameter and without lightning arresters Note 2: DTR-2DT and DTR-4D terminals do not support long line adapters. UNIVERGE NEAX 2000 IPS General Description Page 180 Issue 5...

  • Page 185: Zone Transceiver Line Conditions

    3958m (13000ft) Note: Zone Transceiver is provided –48V power in normal condition. The table at –45V and at –43V show ZT Line Conditions in the event of lower voltage status. UNIVERGE NEAX 2000 IPS General Description Page 181 Issue 5...

  • Page 186: Traffic Capacity

    Authentication by DRS-System Based Available Authentication by MAC Address Available Confirmation when overriding Available Dialing Log-out feature access code Available Log-out Function key Available Soft key Available DHCP Inter-working with DHCP server Available UNIVERGE NEAX 2000 IPS General Description Page 182 Issue 5...

  • Page 187: Chapter 8 System Performance

    Meets North America TI-04 Standards Return Loss More than 15 dB (300 ~ 3,400 Hz) Station: 600 W Line Impedance Trunk: 600 or 900 W Leakage Resistance More than 20,000 W UNIVERGE NEAX 2000 IPS General Description Page 183 Issue 5...

  • Page 188: Rotary Dial Pulse And Dtmf Signaling

    32 to 240 msec. -10 dBm (low group) Signal Level -46 to -5 dBm - 8 dBm (high group) Unwanted Frequency Not Applicable 40 dB below the power of signal frequency Components UNIVERGE NEAX 2000 IPS General Description Page 184 Issue 5...
  • Page 189 (3) Sender/Receiver Specifications Description Specifications Sender Sender Transmitted Level -8 dbm to -11.5 dBm Frequency Variation +/- 2 Hz Receiver Sensitivity Range -35 dBm to 0 dBm Frequency Variation +/- 12 dBm UNIVERGE NEAX 2000 IPS General Description Page 185 Issue 5...

  • Page 190: Audible Tones And Ringing Signal

    Note: The 2000 IPS has the capability to detect the above type of signal from Central Office and to transmit the above type of signal to PBX stations. Built-In Modem on MP Card DESCRIPTION SPECIFICATIONS MODEM 33.6 kbps UNIVERGE NEAX 2000 IPS General Description Page 186 Issue 5...

  • Page 191: Dimensions And Weight

    (when all slots are occupied) Heat Dissipation MAX. AC POWER PIM NO. MAX BTU (BTU/h) CONSUMPTION (W/h)* 1226 2452 1080 3678 1440 4904 1800 6130 2160 7356 2520 8582 2880 9805 UNIVERGE NEAX 2000 IPS General Description Page 187 Issue 5...

Table of Contents