hit counter script
Sony DXC-D30WSP Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. DXC-D30WSP
  6. Service manual
Sony DXC-D30WSP Service Manual

Sony DXC-D30WSP Service Manual

Digital video camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Power HAD WS
DIGITAL VIDEO CAMERA
DXC-D30WS
DXC-D30WSP
SERVICE MANUAL
Vol. 1 (1st Edition)

Advertisement

Table of Contents
loading

Related Manuals for Sony DXC-D30WSP

Summary of Contents for Sony DXC-D30WSP

  • Page 1 DIGITAL VIDEO CAMERA DXC-D30WS DXC-D30WSP SERVICE MANUAL Vol. 1 (1st Edition) Power HAD WS...
  • Page 2 CAUTION ADVARSEL Danger of explosion if battery is incorrectly Lithiumbatteri - Eksplosjonsfare. replaced. Ved utskifting benyttes kun batteri som anbefalt av apparatfabrikanten. Replace only with the same or equivalent type Brukt batteri returneres recommended by the manufacturer. apparatleverandøren. Dispose of used batteries according to the manufacturer’s instructions.

  • Page 3: Manual Structure

    Introducing this manual This manual is the Service Manual Vol. 1 of the DIGITAL VIDEO CAMERA DXC- D30WS and DXC-D30WSP. This manual contains the operation manual related to the operations of this equipment, the replacement of the parts and adjustments.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS 1. OPERATING INSTRUCTIONS 2. SERVICE INFORMATION 2-1. BOARD LAYOUT ..........2-1 2-2. REMOVAL OF CABINET ........2-1 2-2-1. Removal of Side Plate ........2-1 2-2-2. Cautions on Disassembly/Assembly of Top Chassis ........... 2-2 2-3. REPLACEMENT OF MAIN PARTS ....2-2 2-3-1.

  • Page 5: Operating Instructions

    SECTION 1 This section is extracted from operation manual. OPERATING INSTRUCTIONS 1-1. DXC-D30WS/D30WSP DXC-D30WS/P(E)/V1...
  • Page 6 Table of Contents For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of Overview ................14 the FCC Rules. These limits are designed to provide About This Manual ............

  • Page 7: Overview

    Overview Advanced Menu Settings The Advanced menu of the DXC-D30WSL/D30WSPL Advanced menu page numbers Switchable between 16:9 and 4:3 aspect About This Manual camera differs from the Advanced Menu of the DXC- ratios DXC-D30 series DXC-D30WSL/D30WSPL D30 cameras in the following ways. This booklet constitutes an operation manual for DXC- Page 9 Page 10...

  • Page 8: Advanced Menu Settings

    Battery Pack Operating Times Advanced Menu Settings Video Output and Viewfinder Picture The following table shows the maximum continuous operating times when this camera (including viewfinder) is operated at normal temperature under The video output and viewfinder picture of this camera battery pack power.

  • Page 9: Specifications

    9 dB, 12 dB, 18 dB, 18 dB + DPR, 24 dB, 24 dB + DPR, hyper 242 (9 Imaging element Three-chip interline transfer CCD There is a range of Sony products available to meet 980 (horizontal) × 494 (vertical) gain (30 dB + DPR) Pixel resolution every conceivable video shooting requirement.

  • Page 10: Measuring Horizontal Resolution

    Specifications Cables and miscellaneous Measuring Horizontal Resolution The suffix number on a cable part number indicates the length in meters: e.g. a CCZ-A2 is 2 meters long. The number of effective pixels of this camera in (Approximate equivalents in feet: 2 m = 6 ft, 5 m = 16 4:3 resolution horizontal direction is 980.

  • Page 11: Chart Of Optional Components And Accessories

    Betacam SP VCR Computer CA-325B/325BP Camera Adaptor EVV-9000/9000P Hi- DXC-D30F/D30PF LC-421 Carrying Case 8 VCR DXC-D30K/D30PK CA-512/512P + S-VHS VCR DXC-D30L/D30PL (Panasonic) LCR-1 Raincover DXC-D30H/D30PH CA-513 + S-VHS Computer CMA-8A/ VCR (JVC) 8ACE AC power source © 1996 by Sony Corporation...
  • Page 12 Record these numbers in the spaces provided below. Refer Chapter 3 energy and, if not installed and used in accordance with the to them whenever you call upon your Sony dealer regarding instruction manual, may cause harmful interference to radio this product.
  • Page 13 Table of Contents Chapter 4 Chapter 5 Viewfinder Screen Viewfinder Screen Indications ........45 Adjustments and Settings for Special Cases ..........83 Indications and Changing the Viewfinder Display ........45 Settings Skin Detail Correction ............84 (Continued) Menus Viewfinder Normal Indications ........47 Adjusting Color in the Specified Area ......

  • Page 14: Product Configurations

    Product Configurations The eight models, DXC-D30F, DXC-D30K, DXC- and PAL versions and the components as shown in the D30L, DXC-D30H, DXC-D30PF, DXC-D30PK, figure below. The operation of the basic camera unit is DXC-D30PL, and DXC-D30PH, comprise both NTSC the same in all cases. DXC-D30F/D30PF DXC-D30K/D30PK DXC-D30L/D30PL...

  • Page 15: Features

    Features -inch IT type Power HAD CCD Recording and managing setup data Total level control system (TLCS) Dockable with various types of VTRs Even if the incoming light exceeds the range in which the standard auto iris can control exposure, the auto The DXC-D30/D30P Color Video Camera uses In addition to the setup menu that is displayed in the The DXC-D30/D30P docks with the DSR-1/1P...

  • Page 16: Location And Function Of Parts

    Location and Function of Parts Features Freeze mix function (when using DSR-1/1P) VTR data display Camera Head The freeze mix function superimposes any previously recorded still picture on the viewfinder screen to When connected to a VTR, the DXC-D30/D30P is facilitate framing the subject when reshooting the Right side view able to display the following data on the viewfinder...
  • Page 17 Location and Function of Parts 1 EZ (“easy”) MODE button and indicator 5 A.IRIS (auto iris) MODE switch and indicator CAM/DL: This setting uses the DynaLatitude Note Depress this button (EZ mode on) when you want to When you use the auto iris function (by setting the iris function, which finely adjusts the contrast of each The recording time displayed when this switch is set to be able to shoot immediately, with automatic...
  • Page 18 Location and Function of Parts @º ZEBRA switch @¡ UP/ON button 6 SHUTTER switch 8 AUDIO LEVEL knob Set this switch to the ON position to display a zebra Use this button to open displays and to make “ON” Use this switch to set the shutter speed, CLS (clear When the DSR-1/1P is attached, you can use this knob pattern (diagonal stripes) in the viewfinder.

  • Page 19: Vcl-916Bya Zoom Lens

    Use this connector to connect the switch for enabling Connect the lens connector. remote operation of the ClipLink function. !™ VF (viewfinder)connector (8-pin) For details of connectable switches, contact your Sony This is the connector for the DXF-40B/50B (or DXF- dealer. 40BCE/50BCE) viewfinder.

  • Page 20: Dxf-701/701Ce Viewfinder

    Location and Function of Parts 1 Focusing ring 7 MACRO button DXF-701/701CE Viewfinder Turn this ring to focus the lens on the subject. For close-up work, hold this button down while turning the MACRO ring. (See page 82.) 2 Manual zoom control 1 BATT indicator 8 MACRO ring For direct manual zoom control, set the ZOOM...

  • Page 21: Replacing The Lithium Battery

    (See page 79.) of lithium batteries may come loose when the camcorder is moved. If you have difficulty finding 7 Accessory fixing screw hole CR2032-type lithium batteries, contact your Sony Attach optional video lights or other accessories here. dealer. 8 Tally lamp...

  • Page 22: Fitting A Vtr

    Fitting a VTR This section explains how to attach the DSR-1/1P to When replacing the camera head grip with a camcorder Tighten the two screws in the grip, see “Using the Camcorder Grip” (page 23). the camera head. The method for attaching a PVV-3/ grip connector and the two 3P is similar.
  • Page 23 Fitting a VTR Attaching a camcorder grip to the PVV-3/3P Remove the VTR connection plate. Perform steps 2 to 4 in “Fitting a VTR”. VTR connection plate If the viewfinder is attached, adjust the viewfinder to the full-forward position. Remove the DSR-1/1P’s shoulder strap fitting and the For details, see “Adjusting the camera head connection plate.

  • Page 24: Fitting The Lens

    Fitting the Lens In the case of the DXC-D30F/D30PF/D30K/D30PK Using the triangular mark as a model, the lens is already fitted. In other cases, use the guide, push the lens connector following procedure to fit the lens. into the LENS connector on the camera head, until it clicks Remove the retaining rubber into place.

  • Page 25: Using Accessories

    Remove any microphone from the viewfinder before attach the CAC-12 Microphone Holder. adaptor in the LC-421 Carrying Case. beginning. For details, consult your Sony dealer. Pull the viewfinder connector VF connector out of the VF connector on the Using an Optional Microphone front of the camera head.

  • Page 26: Fitting To A Tripod

    Using Accessories Fitting an optional microphone Fitting to a Tripod Use the following procedure to attach an optional First fit the VCT-U14 Tripod Adaptor to the tripod, ECM-670 Microphone. then mount the camera on the tripod adaptor. Loosen the screw of the CAC- Microphone adaptor 12 Microphone Holder, then open the holder and replace the...

  • Page 27: Using The Carrying Case

    • Select a camera cable to fit the camera input connector on the VTR you are using. • The maximum camera cable extent is 10 m (33 ft). For details, consult your Sony dealer. NP-1A/1B Battery Packs (maximum two) - Fasten straps.

  • Page 28: Connecting A Number Of Cameras (Using A Camera Control Unit)

    CCU-M5/M5P/M7/M7P Camera configuration. CCU-M5/M5P Control Unit to provide video and color sync between Camera Control For details, consult your Sony dealer. cameras, and special effects and other devices to allow Unit switching, wipes and so forth. VBS OUT...

  • Page 29: Connecting A Number Of Cameras (Without Using A Camera Control Unit)

    CA-537/537P DXC-D30/D30P CA-537/537P DXC-D30/D30P For details, consult your Anton Bauer products supplier or a) Requires the special-purpose DC-500 Battery Case. Sony dealer. Cannot be used with a camera adaptor. GEN LOCK IN Battery low indications Using Battery Packs VTR/CCU/CMA VIDEO OUT...

  • Page 30: Camera Adaptor Power Supply

    Basic Procedure for Shooting Power Supply Camera Adaptor Power Supply The camera adaptor automatically operates on power supplied to the VTR/CCU/CMA connector from the portable VTR, CCU-M7/M7P Camera Control Unit, CMA-8A/8ACE AC Adaptor or other connected device. Note Before use, check that the device connected to the ZEBRA switch Focusing ring VTR/CCU/CMA connector is able to provide the...

  • Page 31: Shooting With The Dsr-1/1P

    Basic Procedure for Shooting Shooting with the DSR-1/1P If required, switch on the center marker and/or The DXC-D30/D30P docks with the DSR-1/1P to Press the VTR button on the camera head or the Reviewing the recording safety zone (basic menu page 6 and advanced configure the DSR-130/130P DVCAM Digital lens.

  • Page 32: Editing

    Shooting with the DSR-1/1P Press the TAKE button when you find a shot Setting Mark IN/OUT points as you shoot Setting cue points as you shoot Using the Edit Search Function where you would like to set a Mark OUT point. While Back Space Editing Instead of continuing shots from scene to scene, you You can make edit search operations easier by...

  • Page 33: Using The Freeze Mix Function

    Viewfinder Screen Indications Shooting with the DSR-1/1P There are four types of indication screen which appear Release the REV or FWD button when you find Play back the tape on which the image to be used Status indications Display by holding the in the viewfinder, as follows.

  • Page 34: Viewfinder Normal Indications

    Viewfinder Normal Indications Viewfinder Screen Indications immediately, move the cursor to the menu During normal operation, the following items can be Displaying the advanced menu and number and then press the DOWN/OFF button. indicated in the viewfinder. switching to the normal indications •...
  • Page 35 Viewfinder Normal Indications 5 Clip mode indication !¡ Audio recording level indicators Only when connecting the DSR-1/1P Note A “CLIP M” or “CLIP C” indication appears when These show the recording levels of audio channels 1 Indication Meaning Depending on the lens being used, this indication may you use the ClipLink function and record using the and 2 on the VTR.

  • Page 36: Status Indications

    B A T T : 1 3 . 0 V If an error message appears, contact your Sony dealer. To change the page or item self diagnostic function detects an abnormality. Be a) When both the DCC+ and DynaLatitude sure to access this page and perform error checking.
  • Page 37 Viewfinder Basic Menu Basic menu page 2 Basic menu page 3 Basic menu page 5 Item Settings MARKER ON (normal value), OFF Sets MARKER display ON/OFF. MARKER is displayed This menu is displayed only when an external sync when this setting is ON signal is input to the camera adaptor or VTR connected and is not displayed to the camera head.
  • Page 38 Viewfinder Basic Menu Basic menu page 7 Press the UP/ON button to select the required Basic menu pages 8 and 9 character. Each time you press the UP/ON button, the M A R K / C U E : M A R K The following display is shown when the DSR-1/1P is You can create a title of up to four lines, each of F R E E Z E : O F F...

  • Page 39: Contents And Settings Of Each Page

    Viewfinder Advanced Menu Viewfinder Basic Menu Press the UP/ON button once. Bring up the advanced menu pages by setting the Advanced menu page 1 POWER switch to ON while pressing the UP/ON The title is superimposed to the picture displayed button up (see page 46).
  • Page 40 REMOTE connector 1 (to be supported in future version). a) For more information about a connectable switch, contact your Sony dealer. Chapter 4 Viewfinder Screen Indications and Menus Chapter 4 Viewfinder Screen Indications and Menus...
  • Page 41 Viewfinder Advanced Menu To set the camera ID EZ mode settings Advanced menu page 7 Advanced menu page 8 The following settings are set for the camera head Press the MENU/STATUS switch to move the when EZ mode has been selected. cursor to ID SET.

  • Page 42: Setup Files

    Setup Files You can use setup files to reproduce a particular Move the cursor to SELECT FILE and use the UP/ Press the UP/ON button to call up the file. To To call up files recorded onto a tape (when configuration of settings.

  • Page 43: Changing File Settings

    Setup Files Page 11 Access advanced menu page 12. Changing File Settings PAGE12(NEXTm$ PREVm4) Item Settings PAGE12(NEXTm$ PREVm4) When using advanced menu page 10 or 11, you can FILE STORE –99 to ±0 (normal value) to FILE:*FILMLIKE change the settings about picture quality in setup files. Adjusts the saturation of the FILE STORE DESTINATION FILE...

  • Page 44: Using Setupnavi And Setuplog With The Dsr-1/1P

    Using SetupNavi and SetupLog with the DSR-1/1P Setup Files Press the UP/ON button to store the file. To abort The SetupNavi function records the setup menu and ”NO TAPE” is displayed if you neglected to load a the save operation, press the DOWN/OFF button setup files onto a tape, so that the same settings can be cassette.

  • Page 45: Recording The Menu Settings Onto A Tape

    Using SetupNavi and SetupLog with the DSR-1/1P The cursor (→) changes to the text entry cursor Status display (page 2) To abort the data recording while in progress Recording the Menu Settings (↓). Press the DOWN/OFF button. onto a Tape P L A T C R 2 : 3 4 5 6 :...

  • Page 46: White Balance Adjustment

    White Balance Adjustment Adjusting the white balance ensures that as lighting Make the following settings on the camera. conditions change white objects remain white in the • POWER switch: ON SAVE image and tones remain natural. • OUTPUT/DL/DCC+ switch: one of the CAM The color of light emitted varies from one light source positions to another, and as the lighting changes the apparent...

  • Page 47: Using The Preset White Balance Settings

    White Balance Adjustment The adjustment value is automatically saved in AUTO WHITE The color temperature is too low. Try Light Sources and Color Using the ATW (Auto Tracing memory A or B as selected above. -NG- the following, in this order of Temperature White Balance) Function precedence.

  • Page 48: Black Balance Adjustment

    Close the iris and try again. If this fails, from 400 to 450 lines (or 450 to 530 lines) to reduce switch is in one of the CAM positions. page 1. consult your Sony dealer. TRY AGAIN flicker. However, this increases the aliasing. BARS...

  • Page 49: Setting The Clock And Timestamping Recordings

    Setting the Clock and Timestamping Recordings Shutter Settings When using the clear scan function Use advanced menu page 8 to set the camera head’s Watching the monitor screen, adjust the frequency internal clock and record the date and time. PAGE 8(NEXTm$ PREVm4) to give minimum interference.

  • Page 50: Viewfinder Screen Adjustments

    Using an optional part allows you to modify the adjustment range to –2 to +1 diopters or –0.5 to +3 diopters. For details, consult your Sony dealer........................................... 1) Diopter: A unit to indicate the degree of convergence or divergence of a bundle of rays.

  • Page 51: Adjusting The Lens

    Adjusting the Lens Iris Adjustments Flange Focal Length Adjustment It is necessary to adjust the flange focal length (the • When a lens is fitted for the first time distance from the lens flange to the plane of the image •...

  • Page 52: Macrophotography

    Settings for Special Cases Adjusting the Lens Settings for special cases Macrophotography Shooting conditions Setting Effect Use the macro function when the subject is less than The background is very bright, and the Set the A.IRIS MODE switch to BACK L, This lightens the foreground.

  • Page 53: Skin Detail Correction

    In the event of operating problems If you should experience problems with the unit, contact your supplier or Sony service representative. Chapter 5 Adjustments and Settings Appendix...

  • Page 54: Warning Indications

    REMOTE connector 1: Stereo Lens mount Bayonet mount other fault in the heads, disconnect the recording only) mini-jack the recording power and consult your Sony Signal standards EIA standard signal (NTSC color system. dealer. REMOTE connector 2: 10-pin system) (DXC-D30) —...

  • Page 55: Related Products

    Telephoto: 51 × 38 mm WEX-2000 Wipe Pattern Extender (2 × 1 inches) DXF-50B/50BCE 5-inch Viewfinder (monochrome) There is a range of Sony products available to meet Focusing range Infinity to 0.9 m DXF-40B/40BCE 4-inch Viewfinder (monochrome) every conceivable video shooting requirement. For...

  • Page 56: Chart Of Optional Components And Accessories

    Chart of Optional Components and Accessories EC-0.5C2 Microphone Cable CCZ-A cable CCU-M7/M7P/M5/M5P Camera Control Unit ECM-690/672 and C-74 Microphone CCZ-A cable BVW-50/50P Betacam SP CAC-12 Microphone Holder CCZQ-A cable VO-8800/8800P U-matic CCZJ-A cable VHS VTR CA-537/ 537P Camera CCZ-A cable VA-5/5P + BVV-5/5PS Adaptor DXF-50B/50BCE/40B/...

  • Page 57: Service Information

    SECTION 2 SERVICE INFORMATION 2-1. BOARD LAYOUT CN-1294 board MB-785 board DC-DC converter NR-63 board CN-1349 board TG-197 board CN-1595 board CN-1594 board SE-366 board PA-219(B) board AT-125 board BP-30 board CN-1410 board CN-1684 board PA-221(R) board CN-1194 board ES-22 board IF-700 board PR-240 board VA-185 board...

  • Page 58: Cautions On Disassembly/Assembly Of

    Assembly: CAUTION 2-2-2. Cautions on Disassembly/Assembly of 1. Insert the partition to the rail of the upper board rail. Top Chassis When removing the top chassis, following items should be Upper board rail performed. If not, the connectors (CN503, CN504, CN505) should be damaged.
  • Page 59 4. Remove four screws (B3 × 10 : with washer). 6. Remove the CCD unit from transport holder for Disconnect the two connectors, CN2 and CN14 on the replacement CCD unit supplied from the Sony Part Center. MB-785 board. Pull out the Front unit Ass’y.

  • Page 60: Connectors And Cables

    2-4. CONNECTORS AND CABLES 2-4-1. Connector Input/Output Signals The main connector input/output signals are as follows: MONITOR OUT (JACK); 1.0 Vp-p ± 0.1 V, sync negative 75 Z VIDEO OUT (BNC); 1.0 Vp-p ± 0.1 V, sync negative 75 Z CAMERA/CA (50P, MALE) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 (EXTERNAL VIEW)
  • Page 61 CAMERA/CA (76P, MALE) (EXTERNAL VIEW) Signal Specification Signal Specification Zi > 600 Z VBS (CA) (X) OUT 1.0 Vp-p, SYNC NEGATIVE REC TALLY IN Zo = 75 Z ± 5 % S.D. (V/D) IN : 5 V NTSC : 0.286 Vp-p ± 10 % : 0 ±...
  • Page 62 REMOTE (10P, FEMALE) (EXTERNAL VIEW) Signal Specification Signal Specification (SPARE) (SPARE) (SPARE) VBS (RM) (X) 1.0 Vp-p, SYNC NEGATIVE 76P ID VBS (RM) (G) (SPARE) RS232C (C/RM) IN Zi > 10 kZ (SPARE) VTR START/STOP IN OPEN (4.5 ± 0.5 V) ..
  • Page 63 LENS (12P, FEMALE) VF (20P, FEMALE) (EXTERNAL VIEW) (EXTERNAL VIEW) Signal Specification Signal Specification : 0 ± 0.5 Vdc RET SW-IN Zi > 5 kΩ PEAKING CONT IN : 0 ± 0.5 V VTR START/STOP IN TRIG SWD EXT DC OUT 10.5 V to 17.0 Vdc, 2 A POWER +12 V DC GND GND for + 12 Vdc...

  • Page 64: Connection Connector

    2-4-2. Connection Connector 2-5-2. Replacement Way of ROM(IC102) Connections made with the connector panels during Note: When replacing the ROM, it is need that each installation or service, should be made with the connectors menu is reset. or complete cable assemblies specified in the following list, or equivalent parts.

  • Page 65: Dc-Dc Converter Voltage

    2-6. DC-DC CONVERTER VOLTAGE Voltage values can be check as following 1 to != points on MB-785 board and MIC connector. • MIC connector • MB-785 board GND. (EXTERNAL VIEW) CHECK POINT VOLTAGE VALUE CHECK POINT VOLTAGE VALUE _10 V CN117-2pin 5WD EXT.

  • Page 66: Service Mode Operation

    After performing the page of each menu, normally, the operation is performed the menu. When quitting the each menu, the screen is returned to the Menu Select Screen. • Connection: The menu screen is ensured by seen the viewfinder or MONITOR OUT of DXC-D30WS (for NTSC) or DXC-D30WSP (for PAL). 2-10 DXC-D30WS/P(E)/V1...
  • Page 67 • RESET object item and standard set value for setting (Table 1) PAGE ITEM Standard set value ← MPKNEE1 ← MPKNEE2 ← MPKNEE3 ← MPKNEE4 ← RPKNEE ← BPKNEE 9 (NTSC) SET UP - - - RESD OUT - - - BLKG - - - MAT DEST...
  • Page 68 • Page 1 RESET (for NTSC) (for PAL) The "RESET" mode is set to standard set PAGE 1 (NEXT PREV PAGE 1 (NEXT PREV value except each board adjustment values or differential adjustment values by each unit. (Refer to table 1.) RESET RESET (YES...
  • Page 69 • Page 5 Component Level Adjustment • Set the camera main unit to color-bar mode and perform the following PAGE 5 (NEXT PREV adjustments. Use an extension (EX) board to IF-700 board. W Y LVL W R-Y LVL W B-Y LVL Measurement Point Y LVL R-Y LVL...
  • Page 70 PREV changed. According to this, when replacing the TG-197 board R RG or EEPROM (IC1) on the TG-197 board, the reset is needed. G RG Contact your authorized Sony dealer. B RG R SUB G SUB B SUB EXIT MENU (YES...
  • Page 71 • Page 13 Various items setting 2 Standard value PAGE13(NEXT PREV GAMMA ON / OFF of GAMMA GAMMA MATRIX ON / OFF of MATRIX MATRIX ON / OFF of DETAIL ON / OFF of APERTURE YWCLP IRIS GAIN YWCLP Y WHITE CLP level setting :255 IRIS GAIN IRIS GAIN setting...
  • Page 72 • Page 17 Various setting 4 ATW ADJ Take in standard value of ATW Standard value setting of ATW PAGE17(NEXT PREV Standard value setting of ATW MIC ADJ Setting of a musical note mark indication AUTO(YES ATW ADJ FILTER Destination setting of filter (standard:2) MIC ADJ Note : In ATW ADJ, it is taken in the calculation standard value of...
  • Page 73 • Page 19 Selfdiagnosis 2 DISP SELECT PAGE19(NEXT PREV The contents of the defective items are changed. ERROR DISP 1/3 1: The result of latest error is displayed. DISP SELECT : 2: This selfdiagnosis is automatically carried out, and the defective PP-PMPD 000H PR-PMPD1...
  • Page 74 • Page 21 Selfdiagnosis 4 RC-PMPD PAGE21(NEXT PREV The details of check result for synchronization signal input and the ERROR DISP 3/3 internal RAM in RC LSI are displayed. DISP SELECT : 800H: The internal RAM of RC LSI is abnormal. RC- PMPD 000H RC- CY...
  • Page 75 DSP COM The details of check result for the communication between each LSI and microcomputer. 004H: The communication between RC LSI and microcomputer is abnormal. 002H: The communication between PR LSI and microcomputer is abnormal. 001H: The communication between PP LSI and microcomputer is abnormal.
  • Page 76 • Page 22 Present unit condition indication This is the communication of the production. PAGE22(NEXT PREV This is not related to service. 12.1V POWER 224h R GAIN 7e6h B GAIN 800h IRIS POS 000h 000h EXIT MENU (YES • Page 23 TG ROM OPERATION This display item is not used.

  • Page 77: Alignment

    • Digital voltmeter • Oscilloscope (100 MHz or more) • Vectorscope • Waveform monitor • B/W monitor (Sony PVM-91/122 or equivalent) • Color monitor (Sony PVM-1320 or equivalent) • AC Adaptor (Sony CMA-8/8A/8CE/8ACE) • Camera Adaptor (Sony CA-537/537P) • Frequency counter •...

  • Page 78: Switch Setting Before Adjustment

    3-1-3. Switch Setting Before Adjustment 3-1-4. Notes on Adjustment [DXC-D30WS, DXC-D30WSP] Note: (1) Before adjustment, be sure to allow for 10- minute warm-up time. Switch setting for camera side (2) When using the SERVICE menu, ADVANCE menu and BASIC menu, refer...

  • Page 79: Adjustment Item

    3-1-5. Adjustment Item (4) When replacing the CCD unit, be sure to perform the following adjustment items. 3-3-12. Pedestal Adjustment 3-2. Before Adjustment 3-3-13. Shading Adjustment 3-2-1. Color Bar Signal Confirmation 3-3-14. Flare Adjustment 3-2-2. Sensitivity Measurement Confirmation 3-3. Camera Adjustment (5) If the amplitude level of the measured 3-3-1.
  • Page 80 3-2. BEFORE ADJUSTMENT 3-2-2. Sensitivity Measurement Confirmation Note: 1. Before adjustment, connect the equipments Object: Overall white referring to “3-1-2. Connection”. Light: 3200K, 2000 lux 2. Before adjustment, Turn on POWER switch (If the pattern box is used, set the AUTO and allow for 10-minute warm-up time.

  • Page 81: Camera Adjustment

    3-3. CAMERA ADJUSTMENT 3-3-3. Y/R-Y/B-Y CLP Level Adjustment Equipment: Oscilloscope Note: Before the adjustment, enter the “PAGE 1” of To be extended: IF-700 board SERVICE menu, and perform the “RESET”. Preparation: OUTPUT/DL/DCC+ switch/camera side → BARS 3-3-1. Sub-Carrier Frequency Adjustment Trigger: HD (TP83/extension board) Equipment:...

  • Page 82: Y/Sync/R-Y/B-Y Level Adjustment

    3-3-4. Y/SYNC/R-Y/B-Y Level Adjustment NTSC : 700 ±20 mV W R-Y LVL TP60 : 525 ±20 mV NTSC : 700 ±20 mV Equipment: Oscilloscope R-Y LVL TP60 : 525 ±20 mV To be extended: IF-700 board Preparation: OUTPUT/DL/DCC+ switch/camera side →...

  • Page 83: Chroma (Vbs) Level Adjustment

    3-3-6. Chroma (VBS) Level Adjustment 3-3-7. Y (VBS) Level Adjustment Equipment: Verctorscope Equipment: Waveform monitor To be extended: ES-22 board To be extended: ES-22 board Preparation: Preparation: OUTPUT/DL/DCC+ switch/camera side • GAIN switch/Verctorscope → 75 % CAL → BARS • Adjust the PHASE control on the vectorscope so that Test point: VIDEO OUT connector/camera side the burst spot is overlapped to the 75 % axis.

  • Page 84: Y (Yc) Level Adjustment

    3-3-8. Y (YC) Level Adjustment 3-3-9. Chroma (YC) Level Adjustment Note: Be sure that “3-3-7. Y (VBS) Adjustment” is Equipment: Oscilloscope completed. To be extended: ES-22 board Preparation: OUTPUT/DL/DCC+ switch/camera side → BARS Equipment: Oscilloscope To be extended: ES-22 board Test point: TP64 (GND: TP65)/extension board Preparation:...

  • Page 85: Vf Sync/Blkg Level Adjustment

    3-3-10. VF SYNC/BLKG Level Adjustment 3-3-11. CCD Output Level Adjustment Equipment: Oscilloscope Note : • Use a reflection type with chart for this To be extended: ES-22 board adjustment, therefore, control the light so Preparation: OUTPUT/DL/DCC+ switch/camera side that the white area of chart is exactly 3200K →...

  • Page 86: Pedestal Adjustment

    3-3-12. Pedestal Adjustment 3-3-13. Shading Adjustment Equipment: Waveform monitor Note : Perform this adjustment when the lens or Test point: VIDEO OUT/Camera side CCD unit is replaced. Adjustment Procedure Object: White portion of pattern box 1. SERVICE menu “PAGE 15” Equipment: Waveform monitor, Oscilloscope →...

  • Page 87: Flare Adjustment

    3-3-14. Flare Adjustment 3-3-15. MIC LEVEL/MIC Level IND Adjustment Object: Grayscale chart Equipment: Oscilloscope Equipment: Waveform monitor Preparation: OUTPUT/DL/DCC+ switch/camera side → BARS Preparation: OUTPUT/DL/DCC+ switch/camera side →CAM/DCC+ Adjustment Procedure Adjustment Procedure 1. Test point: CL201/MB-785 board (GND: Capacitor, C202 + side/MB-785 1.

  • Page 88: Character Position Adjustment

    3-3-16. Character Position Adjustment PAGE 8 (NEXT PREV Equipment: Color monitor (or, B/W monitor) CLOCK IND CLOCK SET (START Preparation: OUTPUT/DL/DCC+ switch/camera side TONE → BARS XXdB XXXX Test point: MONITOR OUT connector/camera side 9 7 1 1 0 8 1 4 : 5 9 EXIT MENU (YES Adjustment Procedure...
  • Page 89 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
  • Page 90 Printed in Japan DXC-D30WS (UC) Sony Corporation 1997. 12 08 DXC-D30WSP (CE) 9-977-326-11 Image & Sound Communication Company ©1997 Published by Engineering Services Dept.

This manual is also suitable for:

Dxc-d30wsDxc-d30wslDxc-d30wspl

Table of Contents