1. Safety and Cautions …………………………………………………………………………………………7 Contents 2. Look and Feel …………………………………………………………………………………………………8 3. Getting Started ……………………………………………………………………………………………… 10 Box contents ………………………………………………………………………………………………… 10 Installing the battery …………………………………………………………………………………… 11 Charging your battery …………………………………………………………………………………… 11 MicroSD Card Loading …………………………………………………………………………………… 12 4. Essential Topics …………………………………………………………………………………………… 13 Communication Control keys …………………………………………………………………………...
Page 3
Answering a call …………………………………………………………………………………………… 17 Dialing a phone number ………………………………………………………………………………… 17 Rejecting an incoming call …………………………………………………………………………… 17 Dialing a number from call history ………………………………………………………………… 18 Ending a call ………………………………………………………………………………………………… 18 Dialing a number from Contacts …………………………………………………………………… 18 Adding a Contact …………………………………………………………………………………………… 18 Silencing a ring………………………………………………………………………………………………...
1. Safety and Cautions • Switch off the mobile phone in the vicinity of chemical plants, gas stations and other locations containing explosive objects. • Keep the mobile phone away from small children. • Switch off the mobile phone as instructed where signs are present. • Switch off the mobile phone before boarding planes and during flight. • Obey the local laws while driving. When hands free function is available, use the hands free calling device to ensure safety. • Take special care when using the mobile phone in the vicinity of such devices as pacemakers, hearing aids and electro-medical equipment, which may be affected by the mobile phone. When using other medical equipment, verify with suppliers and medical staff that the equipment will not be affected. • There is no warranty or guarantee for accessories not produced by the original mobile phone manufacturer. • Never attempt to disassemble the mobile phone. Opening the unit may void any warranty. • Attempting to charge the mobile phone without the battery installed can damage the phone and create a fire hazard. • Charge the mobile phone in a well-ventilated environment, and keep it away from flammable or explosive objects. • To avoid demagnetization, keep the handset away from magnetic substances such as magnetic discs or credit cards. • Keep the handset away from liquids. Remove the battery if the handset gets wet. Do not attempt to use the mobile phone under these circumstances. • Avoid using the mobile phone in extreme temperature environments. Never leave the mobile phone exposed directly to sunlight or in an extremely humid or dust-filled environment. • Do not clean the handset with liquids or detergents. • ...
• The original mobile phone manufacturer will not honor any warranties or guarantees if the above instructions are not followed by the mobile phone user. • Please recycle the Lithium-ion batteries or dispose of them properly. Do not dispose of the batteries by throwing them into the household waste. 2. Look and Feel...
Right side Left side 3. Getting Started Box contents • 1 phone • 1 battery • 1 microUSB wall charger • 1 user manual • 1 user quick start guide Installing the battery 1. Remove the rear cover of the phone. There is a slot at the bottom rear of the phone for a coin or fingernail. 2. Place the battery in the opening. Be sure that the contacts align between the phone and battery. 3. Replace the rear cover.
Warning: If the phone is on when removing the battery, you may lose stored information. Charging your battery The phone comes with a 2 piece charger (USB cable and AC adapter) To charge the phone: 1. Connect the USB cable to the AC adapter. 2. Connect the AC adapter to the wall power socket. 3. Remove the USB cover on the lower left side of the phone. 4. Connect micro USB connector on the USB cable to the phone. The phone can also be charged from a USB port on a computer.
• While the battery is charging, the battery symbol will gradually scan from right to left. • A new battery must be fully charged before it is used for the first time. • To keep the battery functioning optimally, it is recommended that you occasionally discharge the battery fully by consuming the power until the phone is switched off automatically. • During the course of charging, it is normal for the phone and the battery to heat up slightly. The phone will automatically protect itself when battery temperature rises to control temperature variation by extending the charging time. • The handset will give an alert as the battery is running out. When the power has run out, the handset will be switched off automatically. • Actual time of usage of the battery varies according to different operation modes and settings of network base station. If you use the phone when battery is rather low, the phone may switch off automatically. • You may choose to charge the battery under power-off or standby state. If the phone is charged under power-off state, it will start and display the graphic denoting that the unit is charging. • When the battery is fully charged, charging operation stops automatically. The battery symbol on the screen will maintain a graphic showing that the battery is full. At this time, please unplug the charging cable. • Calls can be made while charging. MicroSD Card Loading The MicroSD card slot is located underneath the battery. Please follow the battery installation instructions above to access the MicroSD card slot. The MicroSD card slot is located in the upper right corner of the battery well. ...
1. To insert the MicroSD card, unlock and open the cover by gently sliding the microSD card slot cover in the upward direction until it clicks. 2. Lift the cover, place the MicroSD card in the slot so that the contacts of the microSD card and the phone mate. There is an outline of the card to ensure the card seats properly in the slot. 3. Close the cover, and lock the MicroSD card slot by gently sliding the cover in the downward direction until it clicks. 4. Reinsert the battery and back cover, following the battery instructions above. 4. Essential Topics Communication Control keys The Answer /Send key is used for answering a call, making a call (after a number has been entered), or for dialing from the call history. The End/On/Off key is used for ending a call (during dialing and communication state), or for exiting a menu to ...
return to standby menu. Pressing and holding this key will switch the phone on or off. Navigation keys and Soft keys The Navigation key is used to scroll across the screen. The button at the center of the Navigation key is used to Select an item. The Left Soft key is used to enter the menu. The Menu Return/Right Soft key is used to return to the previous menu. The functions of the two soft keys depend on the application and the functions that are being accessed. The End/On/Off key is used to return to the standby screen from anywhere in the menu. Standby screen The Standby screen provides user the ability to access 5 common and frequently used icons: Contacts, Messages, Multimedia, Calendar and Info Portal. The Navigation key is used to scroll across the icons and the Select button is used to make the selection. The Keypad Keys from 0 to 9, * and # are used for dialing. Inputting password, letters, symbols etc., is accomplished by the QWERTY keyboard. See the section on input method for further details. Backlight After the mobile phone is in standby for a period of time (length of time is set by the user), the phone will turn off the screen backlight to save power. If the screen backlight goes out, you can press any key on the phone’s keypad to turn on the backlight again. Backlight off delay time can be changed by the following steps:...
1. From the Standby screen, press the Left Soft key 2. Select Settings 3. Select Display Setup 4. Select LCD Back Light 5. Select either 10s, 20s, 30s or Always on Alert modes There are multiple user-selectable tones available for text message and call notifications. Please follow the paths below for selecting the modes and the specific tones for each type. For Text message alerts: 1. Select Profiles from the main menu 2. Select one of the Profile Settings (Normal, Loud, Vibrate, or Silent) 3. Select Personalize 4. Select Incoming call alert / Ringtone / Message alert tone / Roaming Ringtone 5. Select the tone 5. Display Icons Signal strength received by the antenna Battery level indicator...
Page 16
Alarm clock Vibrate icon Unread messages Ring icon Silent Vibrate first then ring Missed call Keypad locked Roaming Bluetooth Create new text message Inbox Audio player Outbox Camera Sentbox Recorder Draftbox Search Delete...
6. Basic Operations Turning on the phone Press the End/On/Off key and hold for 5-6 seconds. The phone will automatically search the network as long as the phone has no password protection. After the phone has registered on the network, the signal strength will be displayed at the top right corner of the screen. The phone is now in the standby state and you can make or answer a call. Your phone remains in a searching state if it fails to find the available network system. If a password for the phone is required after it is switched on, please input the password, and then press the right soft key for confirmation. After unlocking, the phone will display the signal strength. Turning off the phone Press the End/On/Off key and hold for 5-6 seconds. Warning: If you switch off the phone by removing the battery, you may lose stored information. Answering a call Press the Answer/Send key. Dialing a phone number In the standby state, enter the telephone number (include country and area codes if necessary) and press the Answer/Send key. Rejecting an incoming call Press the End/On/Off key. ...
• The call will go directly to voicemail, if that service is active. • If you have subscribed to caller ID service, then during an incoming call the caller ID will be displayed on the screen. If this number is already saved in the contacts list then caller’s name will also be displayed on the screen. Note: If you have subscribed to the call forwarding services, incoming calls may be forwarded to the specified number automatically. Dialing a number from call history Press the Answer/Send key, select number from the list and press the Answer/Send key again. Ending a call Press the End/On/Off Key. When a call is ended, the call timer stops and the text ‘Call Ended’ is displayed on the screen. Dialing a number from Contacts 1. Select Contacts from the main menu 2. Select Contact List 3. Scroll through the list and select the contact to dial 4. Press the Answer/Send key to dial the number Adding a Contact To add a new contact 1. Select Contact icon from standby menu...
2. Press Left Soft key to select Options 3. Select Create New Contact 4. Select Name to enter name using key pad 5. Press Left Soft key to select OK 6. Select contact number 7. Press Left Soft key to select Edit 8. Enter contact numbers 9. Press Left Soft key to select OK 10. Press Save then Left Soft key to select Yes to save contact Silencing a ring Press the # key and hold for 3 seconds. To change from ringtone to vibrate, Press the # key and hold for 3 seconds. Press the # key again to revert back to ringtone. Adjusting the volume during a call During a conversation, you may press the volume up and down key (on the right side of the phone) to adjust the volume of earpiece. Missed call If there are missed calls, the missed call symbol will be displayed on the main screen. Missed calls can be viewed by selecting the Call History icon on the main menu.
7. Using the Menu Accessing the main menu Press the Menu/Left Soft key. Returning to the previous menu Press the Menu Return/Right Soft key. Returning to the standby screen from anywhere in the menu Press the End/On/Off key. Navigating the menus Use the Navigation key, then press Select key (in the center of the Navigation key). The standby screen menu has five options, Contacts, Messages, Multimedia, Calendar and Info Portal. Standby Screen Menu Selection Contacts ...
Page 21
By pressing the Menu/Left soft key, the following 12 main menu icons can be viewed. Messages C all History Contacts Multimedia Camera Info Portal Internet Tools & Games ...
8. Messages Messaging is a network service. You may be required to subscribe to the service from your network operator prior to sending and receiving text messages. A message is sent to the messages center of the network, then to the targeted user by the network. If the targeted user’s phone is off or out of network area, the network will store the message temporarily. When the phone receives a new text message, you will be prompted according to setting and the Unread Messages icon will appear at the top of the main screen to indicate unread text message. To open and read an incoming Text message 1. Select the Messages Icon, then 2. Select the type of Message a. Select Text Messaging (for simple text messages, up to 140 characters), then select Inbox b. Select Picture Messaging (for attached, multimedia files (photos, video, audio, etc), then select Inbox New text Message (SMS) You can create a text message in this menu. Every text message has a capacity of 140 characters. To create a new text message 1. Select Messages icon 2. Select Text Messaging 3. Select New Text Message 4. U se the key pad and type your message Once the text has been entered, the following options are available, by pressing the left soft key.
• S end to: send text message •Insert: 1. Insert Contact info: Insert contact number. 2. Insert text template: Insert common phrase in the text message. It provides you with 12 common phrases. • S ending Options: Set delivery priority, delivery report, immediate/schedule delivery • Text Entry: Select input method (see Text Input Method section) • Save to Drafts: Save to outbox. • Cancel Message: Return to information list interface Inbox The Inbox is used for reading text messages received. In the inbox, the phone can store up to 50 text messages. You may press up and down-navigation key to browse the message list. In the message Read mode, the following options are available. • Reply: Reply to the text message you are currently reading. • Forward: Forward the text message you are currently reading to others. • Move to Hot Messages. • D elete: Delete the text message you are currently reading. Outbox This feature is used to store sent and failed messages. In the message Read mode, the following options are ...
• D elete: Delete the message currently being read. • D elete Multiple: Delete multiple items. • Clean up Message: Delete all Outbox messages. • New Text Message: Create a new text message. Sentbox The Sentbox is used for storing the text messages you have sent and selected the Save and Send option in the Send to menu. • D elete: Delete the message currently being read. • D elete Multiple: Delete multiple items. • C lean up Message: Delete all Outbox messages. • New Text Message: Create a new text message. Draftbox After editing a new text message, choose “Save”. The message will be saved into the draft box. • Delete: Delete the message currently being read. • Delete Multiple: Delete multiple items. • Clean up Message: Delete all Outbox messages. • New Text Message: Create a new text message. Template There are 12 common short phrases stored in the phone. You can add, then edit or delete your own common ...
Deferred Lists messages that have been deferred sending. Hot Messages Stores messages that the user deems are important or ‘hot’. Settings • Auto Delete: On/Off • Memory Status: Displays the amount of memory being used for Contacts and text messages. • Signature: Set signature information. Delete • ALL: Delete all text messages stored in the outbox, inbox, sentbox, outbox. • I nbox: Delete all text messages in the inbox in the phone. • Outbox: Delete all text messages stored in the outbox. • Sentbox: Delete all text messages in the sentbox in the phone. • Draftbox: Delete all text messages in the draftbox in the phone. • V oice Mail: Delete all messages in voicemail. Voice Mail By selecting the Voice Mail menu, the phone will automatically access the Voice Mail service. The Voice Mail service can also be accessed by holding the “1” key in standby mode. Picture Messaging (MMS) Your cell phone can also send and receive MMS. This means you can send messages that contain photos, sounds, and text through a MMS service. When sending a MMS message, the receiver must be using a MMS compatible cell phone in order for them to ...
view your message. Note: This feature can only be used with a network provider or service that supports MMS. MMS messages can only be received and viewed by devices with MMS compatibility or e-mail features. Please contact your local network operator for setting up MMS messaging. Create a Picture Message (MMS) To create a Picture Message 1. S elect Messages icon 2. Select Picture Messaging 3. Select Create Picture Messaging Within Create Picture Messaging, you can enter the following fields: i. Receiver: Set the number or e-mail address of the receiver. ii. E dit Content: Edit the content of the MMS. Press “Edit” to enter the following options. • E-mail address. • I nsert: You can insert images, sounds or other elements using the cell phone or T-FLASH. • Preview: Preview the inserted multimedia elements. • Add: You can add a new page, theme, number to CC, number to BCC, or Slideshow Time: Set the time when the images change in the previewed multimedia message. 4. Press the Left Soft key for the options to Send, Add, Save as draft, Save as Template. Inbox This menu allows you to review your received MMS messages. • ...
• F orward: Forward the selected MMS message to another person. • Delete: Delete the current MMS message. • Delete All: Delete all the MMS messages in the Inbox. • L ock/Unlock: When in locked mode, message cannot be deleted. Outbox MMS messages that failed to send or are being sent are stored in the Outbox. The following operations can be performed on the messages in the Outbox: • Resend: Resend the selected MMS message. • D elete: Delete the current MMS message. • D elete All: Delete all the MMS messages in the Inbox. • Lock/Unlock: When in locked mode, message cannot be deleted. Drafts MMS messages can be optionally stored in Drafts after being edited. The following operations can be performed on messages in Drafts: • F orward: Forward the selected message. • Delete: Delete the current MMS message. • D elete All: Delete all the MMS messages in the Inbox. • L ock/Unlock: When in locked mode, message cannot be deleted. Sent MMS messages there were successfully sent are stored in Sent. The following operations can be performed on ...
• Send Again: Resend the selected MMS message. • Forward: Forward the selected message. • Delete: Delete the current MMS message. • Delete All: Delete all the MMS messages in the Inbox. • Lock/Unlock: When in locked mode, message cannot be deleted. Templates Edited MMS messages can be stored in Templates. Settings This menu allows you to make the following settings to the configuration for sending and receiving messages. • Profile: Select a Public mobile or User-defined Network. • Send: Save sent items: Set to enable or disable the save sent items. Delivery time: Set the delivery time as Immediate, 1 hour, 3 hours, 6 hours, or 12 hours. • Receive: Retrieval Mode: Set the retrieval mode as automatic or manual. • Edit Settings: S ignature: Set to enable or disable the signature. Slide Time: Set the switch time when previewing MMS message slideshows to 2 seconds, 5 seconds, 8 seconds, or 10 seconds.
• Save Picture Messages: Select the storage location as internal memory card or cell phone. 9. Contacts To enter a contact 1. From the Main Menu select the Contacts Icon 2. Select Create New Contact 3. Enter the contact information in the various fields 4. Select Save to store the contact information To dial from your contacts list 1. From the Main Menu or Standby screen select the Contacts Icon 2. Select Contact List 3. Select the contact 4. Highlight the contact’s phone number you would like to dial 5. Press Answer/Send key to dial the phone number In the Contacts menu from the Menu screen the following options are available: Contact list Display all contacts.
Set Speed Dial Enables the user to assign speed dial keys to a phone number in the contact list. Speed dial number 1 is reserved for voice mail; 2 through 9 can be set by the user. Memory info Display the memory status of the phonebook in the phone. 10. Downloads This phone provides access to the BREW ™ (binary runtime environment for wireless) catalogue downloading feature. The BREW Shop lets users browse the carrier's Application Download Server to see what applications are available for purchase or trial. From the main menu screen, select the Download Icon. Within the Download menu, there are two options: Downloads and Settings, plus a Help feature. Within the Downloads, you can select Catalogue or About. Within the Settings menu, you can select Order Apps, Move Apps, Manage Apps, Main Menu View, Screen Savers or View Log. 11. Tools & Games Select the Tools & Games Icon from the main menu, and then select Tools or Games. Under the Tools section, the following Items apply.
Alarm You may set up to 6 alarms. 1. P ress the up and down-navigation key in the tools main menu and select Alarm. 2. Press the up and down-navigation key to select one of the alarms and press the left soft key to access the alarm setting. 3. Press the left and right-navigation key in the alarm clock setting interface to select alarm clock setting content. You may set the alarm clock using State (On/Off), Time, Mode and Prompt. 4. The AM/PM is set by pressing the center of the navigation keys. 5. When you have selected and set each item, press the up and down-navigation key to select the next line; when you have selected time, you can input the time directly. Notes This function is a place to write notes to yourself, assign a type of note and store them. 1. Select Notes 2. Select Create Note 3. Save Calculator The Calculator can perform four standard operations (add, subtract, multiply, divide). Use 0-9 keys to input a value. The layout of the calculator matches the keypad, so that multiplication is shown with the “*” key, the enter key is the Left Soft Key sign, addition is with the “+” key and so on. You can also press the navigation keys to select one of the four operations: add, subtract, multiply and divide. ...
1. P ress the number keys to enter a value 2. Select an operation 3. Press numeric keys to input the second operation value 4. Select the = key. The result will be displayed on the screen. To perform multiple mathematical operations, you must press equal (=) after each operation. Stopwatch This unit provides two stopwatch functions: common mode and loop mode. The Common Mode is a simple stopwatch, on/off and reset. 1. Press “Select” to start timing. 2. Press Select or left soft key to stop. 3. Press again to continue timing. If there is a time noted, press the right soft key to clear. The Loop Mode is so that additional time segments can be added, started and stopped to record various activities within the event. The “add” button adds another loop while recording the previous loop’s time. World Time To view the time in different locations of the world, scroll right/left across the map. Calendar You can view the current date or scroll the calendar to view other months. You can also view weekly or daily calendar entries, by going to: 1. Select “Option” 2. Select Week View or Day View Schedule: You may schedule an event into the calendar, with date, time and an alarm to notify you of that ...
event, by going to: 1. Scrolling to a date, 2. Select “Option” 3. Select “Make a note” a. Type of event: Meeting, Birthday, Memo, etc. b. Entering Subject, Location, Time, etc c. Repeat, Alarm, Alarm Date d. Done e. Save Downloads The Download menu can be accessed from this level of the menu as well as from the main menu. See the section above for details. Games This handset provides two full-graphic games: Russian Block and Snake. 1. Select Games from the menu to access the game list. 2. Press the Menu/Left Soft key to confirm. 3. When the game interface and description of the selected game appears, press the Menu/Left Soft key again to start the game. Both games allow turning the audio On/Off and provide Help and High Scores. Please see the menu for each game for Rules and Help.
12. Call History Call History can be accessed from the menu screen by selecting the Call History icon from the main menu. Missed calls If there are missed calls, you can view the detailed information of the missed calls in the ‘missed calls’ menu. Each record contains the number (and the contact name if number is already in the phonebook), date, time etc. Press the up and down-navigation key to view the information of other missed calls. Press the ‘Call control’ key to dial the selected number and press the right soft key to return to higher-level menu. Missed calls are divided into the following two situations: 1. If the number is not stored in the phone, the phone number will be displayed in the missed call list. Select the number and press the left soft/menu key to access the sub-menu of this missed call, which has the following 5 items: • D elete: Delete this missed call number record. • Save to Contacts • Dial • Send SMS: Send text message to this missed call number. • Blacklist: Block all incoming calls from this number 2. I f this number is already stored in the phone, the caller’s name will be displayed in the missed call list. Received calls The phone saves the 20 most recently received calls automatically. Functional operation and display mode is the same as those of missed calls.
Dialed calls The phone saves the 20 most recently dialed calls automatically. Functional operation and display mode is the same as those of missed calls. Delete log • Delete Missed Calls: Delete all records of missed calls. • Delete Received Calls: Delete all records of received calls. • D elete Dialed Calls: Delete all records of dialed calls. • Delete All: Delete all records of recent calls. Call time • Last Call Time • T otal Dialed: Total of all dialed calls time since the timer was reset last time. • Total Received: Total of all received calls time since the timer was reset last time. • Total Call Time • Total Life Time 13. Profiles The Profiles setting is used to customize the phone’s alerts and ringtones. To select and personalize the Profile settings, select the Profiles icon from the main menu. There are five predefined profile settings which can be customized: Normal, Loud, Vibrate, Silent, and Airplane Mode.
Page 36
Note: in Airplane Mode, please consult airline staff about the use of Airplane Mode in flight. Turn off your phone whenever instructed to do so by airline staff. Airplane Mode turns off your phone’s calling features in locations where wireless phone use is prohibited. You cannnot make or receive calls in Airplane Mode, but you can use your phone’s other non-calling features Activate Set to be current active profile. Personalize You are able to customize the following settings for each of the above choices: • Incoming call alert: Alert method for incoming calls. • Voice volume: Set the speaker volume. • Ringtone: Select the incoming ring tone. • Ring volume: Set the ring volume for incoming calls. • Vibrating alert: Select whether or not to enable vibration. • Message alert tone: Select the text message alert tone. • Roaming Ringtone • Keypad tone: Set the keypad tone. • Auto Answer: Set auto answer time. • Speakerphone: Select whether or not to enable the speaker.
14. Settings Settings features can be accessed from the menu screen by selecting the Settings icon from the main menu. Phone Setup • L anguage: Choose English or French • Greeting: Switch between Enable and Disable. The greeting is shown when the phone is powered on and can be edited by highlighting the current greeting and pressing the left soft/menu • Clock Format: Set between 12 hour (w/AM and PM) or 24 hour. • Roaming: Select Automatic to enable roaming or Home Only to disable roaming. • USB Disk Mode: Enables the transfer of date between a PC and the installed microSD card on the phone using the data cable. Display Setup • W allpaper: Select a picture as the background image on the phone. • LCD Backlight: The backlight time can be set to turn off after 10, 20, or 30 seconds. It can also be set to always on, however the longer a backlight is on the faster the battery will drain. • Brightness: You can select the brightness level of the LCD backlight using the left/right navigation key. Call Setup • Call Duration Reminder: Set the reminder to sound during calls at 45 seconds, 50 seconds, 55 seconds, or off. • Call Connect Notification: If this feature is turned on, then a notification will sound each time a call is connected. ...
• Blacklist: You can set up a blacklist. After enabling the blacklist, the phone numbers listed in the blacklist will not be able to call this phone. o Status: Disable/Enable. o B lacklist List: Up to nine blacklisted entries can be added. You can edit the list through this menu. Security Setup To make changes in the Security menu, you must correctly input the phone password. The initial password is 1234. • Phone Lock: If “Enabled”, when the phone is powered on you will be prompted to enter the phone’s password correctly to use the phone. • Keypad Lock: The keypad lock can be set to be enabled after 5 seconds, 30 seconds, 60 seconds, or 5 minutes. To unlock the keypad, press “*” then the Answer/Send key. Even when locked, you may answer an incoming call. • Call History Lock: If enabled the phone will require the password to be entered each time you access the phone’s Call History. • P honebook Lock: If enabled, the phonebook cannot be viewed until the password is entered. • Message Lock: If enabled, the phone will require the password to be entered to access messages. • Change Password: Change the password using this option. The Old Password must be entered before a new one is accepted. Enter the same new password twice and press the left soft/menu key to confirm. The new password will then become effective. During this course you may press the right soft key to discard the change at any time and return to higher-level menu. You can create separate passwords for the phone lock, the call history lock, the phonebook lock, and the message lock. • Restore Factory Settings: This function is used for restoring to the default factory settings.
Phone Info Displays the information about the phone. 15. Internet To access the Internet, Select Internet Icon from the main menu. This feature allows your phone to browse the internet. • Home Page: A home page can be saved with each mode. When using WAP to browse, the home page for this mode will first be accessed. • Enter URL: Enter the URL for the website to be connected. • Search: Highlight to select a search engine to perform searches, then enter text criteria To search on. • Search: Enter key search words • History: You can review the latest accessed web pages. • Bookmarks: Multiple bookmarks can be created. Enter the Options menu and you can perform the following operations on Bookmarks: Open: Log in to the selected web address. Add bookmark: Add a new bookmark. Delete bookmark: Delete the selected bookmark. D elete all bookmarks: Delete all the bookmarks. Edit bookmark: Edit the name and web address of the selected bookmark. Lock bookmark: Lock the bookmark. N ew directory: Add a new directory. ...
Details: View the details on the selected bookmark. Reset: Restore default settings. • P ush Box: Store information on messages to notify the user about WAP site messages. • S ave web pages: Use to save a page for reviewing the web page later. • Advanced Options: Advanced options are primarily used to configure certain internet parameters and information. • A bout: Display browser and platform version numbers. • E xit Browser: Exit the browser and return to the menu interface. 16. Camera Operation To activate the camera (from the standby mode) press the Camera key at the lower right side of the phone. The camera can also be accessed from the menu screen by selecting the Camera Icon. The camera can be accessed in either of three ways: simply by pressing the button on the side of the phone, thru the main menu or thru the multimedia menu. Once you are in the camera interface, you can use this feature to take pictures as you wish. Select “Camera” to enter the interface. Note: Please follow local laws and regulations when using this cell phone to take pictures. 17. Multimedia Multimedia features can be accessed by selecting the Multimedia Icon.
Audio Player The music player is provided for you to play all music file types stored on the cell phone or storage card. Supported music file formats include: MP3, MIDI, AMR, AAC, WAV, and QCP. The music player interface icons are sequentially: Previous, Pause, Play, Stop, and Next. You can move the cursor using the left and right keypad and then press the “OK” key to perform an operation. Press the left keypad to enter to options. The functions for the “Options” provided are as follows: • Add To List: New songs can be added from the file manager. • Play: Play the currently selected song. • Play List: After selected a play list, the music player interface will display the items in the list. They can be play in order or songs can be selected from the list. • Repeat: Repeat the song. • Bluetooth Playback: After connecting a Bluetooth device, the music can be heard through Bluetooth earphones. • D elete: Delete the currently selected song. • D elete All: Clear the play list. • Artist Note: When adding new music to the phone, select “Update Playlist” at the first “Option” screen.) When the Audio player is active, the buttons on the left side of the phone provide Rewind/Previous Selection, Pause/Play and Forward/next Selection choices. Camera The camera is also accessible within this menu screen. See the section on Camera for further details.
Recorder This feature allows the recording of voice through the phone’s microphone. The files will be stored in the phone’s memory and the size of the file depends upon the amount of memory available. Standard functions in this feature are: • Record • Play • Pause • Stop • Rewind • Fast Forward Note: Please obey all applicable laws when recording conversations. Gallery This phone provides memory space for use by the user. SD Micro cards (of optional capacity) are also supported. You can use these features to easily manage the directories and files of all forms stored on the cell phone or SD Micro card. 1. Enter Gallery 2. G o to “Phone” (or “Card” if available) 3. Select Open: Use this function to enter the root directory of the memory. Default system directories, created data directories, and account files will be listed at the root directory (the root directory will only contain system folders the first time the phone is turned on or if the user has yet to create any directories). ...
4. Or click “Options” to access the following operations: • M anage: The following actions can be performed on the files listed: copy, move, delete, rename, and view properties. Add Option in the Manage menu: • Mark • New Directory • M emory Status: Display available space and total capacity. 18. Bluetooth The Bluetooth features of the phone can be accessed by selecting the Bluetooth Icon from the menu screen. To set up a new Bluetooth device: 1. Select Device Search: When a Bluetooth device is enabled, all Bluetooth hands free devices and Bluetooth devices will be searched for. Bluetooth devices are then added and paired. 2. After detecting a Bluetooth hands free device, a Bluetooth password must be entered to perform the pairing. (Bluetooth passwords are set by other Bluetooth devices.) 3. Once pairing completes, it will connect with the device. Other options include: 1. D iscoverable: Enable this function find devices within three minutes. 2. F ound Devices: Display detected devices. 3. M anage: List the devices connect to the cell phone. Bluetooth hands free devices and Bluetooth devices can be deleted and configured. Pair: Pair with the device selected. Remove: Remove the selected device from the list. ...
Browse Files: When browsing files, the selected device must be successfully paired. Setup Bluetooth: Enable and disable Bluetooth, rename, and device status. 19. Text Input Method This handset supports full English and French. You can set the language under the path [Settings] > [Phone Setup] > [Language]. Multiple text entry modes are available in the SMS text input screen. By selecting, ‘More” and then ‘Text Entry,’ the mode can be changed. The icon in the upper left of the SMS screen changes to show the modes. • Abc –first letter capitalized • a bc –all letters lower case • A BC –all letters upper case • E n –predictive text in English • Fr–predictive text in French • 123-numeric In the predictive text modes, after the first two letters are input, suggestions to the word are noted at the bottom of the screen. By pressing the ‘navigation’ key to the right, additional words are presented. By selecting the word and pressing the ‘select’ key, that word is entered. Sym This key brings up a separate screen showing commonly used symbols. This is active for one keystroke only. Cap C hanges the case of letters for one keystroke, reverting back to standard case with the next key pressed. Alt C hanges the key from letter to the related number or punctuation, for one keystroke only.
Appendix I Common Fault Diagnoses Trouble Possible reasons The phone cannot be 1. Check to make sure battery is charged switched on 2. Check to make sure battery is installed properly 1. Check if the charger is connected with the phone correctly. 2. Check if the charger is connected with the socket correctly. Battery cannot be charged 3. Check to make sure that the battery is holding charge. The performance of the battery will degrade over time. 1. The signal is too weak, or there may be some radio interference. View the signal Fail to link the network indicator on the screen to see whether any bars are showing Check to make sure the phone is registered in the network. Check whether the screen Cannot make a call displays signal indicator. 1. Check to make sure the phone is registered in the network. Cannot answer a call 2. Enable the ‘call forwarding’ function 3. Check to make sure the ‘Blacklist incoming’ function is enabled. Unable to use some Consult with network operator for whether it supports these functions and whether functions subscription is required. ...
Appendix II Abbreviations and explanations MMS Multimedia Message Service SMS Short Message Service *Coverage disclaimer: Various services through this device, such as roaming, may require upgrades or additional charges from the carrier. Please contact your provider for additional information. Disclaimer Note: Some of the contents in this printed material may differ from your phone depending on the software level and/or your service provider’s requirements.
FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 48
▶ RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.
Page 49
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on.
Page 50
Guide de l'utilisateur du téléphone mobile...
Page 51
Table des matières 1. Sécurité et précautions ……………………………………………………………………………………………………………………… 7 2. Regardez et touchez …………………………………………………………………………………………………………………………… 8 3. Démarrage ………………………………………………………………………………………………………………………………………… 10 Contenu de la boîte ……………………………………………………………………………………………………………………………10 Installation de la pile ………………………………………………………………………………………………………………………… 10 Charge de la pile ………………………………………………………………………………………………………………………………… 11 Chargement de la carte MicroSD …………………………………………………………………………………………………………12 4.
Page 52
Composition ……………………………………………………………………………………………………………………………………… 17 Refus d'un appel entrant ……………………………………………………………………………………………………………………17 Composition à l'aide de l'historique des appels …………………………………………………………………………………18 Fin d'un appel …………………………………………………………………………………………………………………………………… 18 Composition à l'aide des Contacts ………………………………………………………………………………………………………18 Ajout d'un contact ……………………………………………………………………………………………………………………………… 18 Mise en sourdine d'une sonnerie ………………………………………………………………………………………………………19 Ajustement du volume pendant un appel ……………………………………………………………………………………………19 Appel en absence ………………………………………………………………………………………………………………………………...
Page 53
Messages Hot ……………………………………………………………………………………………………………………………………24 Réglages ……………………………………………………………………………………………………………………………………………24 Supprimer …………………………………………………………………………………………………………………………………………25 Messagerie vocale ……………………………………………………………………………………………………………………………25 Messagerie de photo (MMS - messagerie multimédia) ………………………………………………………………………25 Créer un message de photo (MMS) …………………………………………………………………………………………………… 26 Boîte de réception ……………………………………………………………………………………………………………………………26 Boîte d'envoi ……………………………………………………………………………………………………………………………………27 Brouillons …………………………………………………………………………………………………………………………………………27 Envoyé ………………………………………………………………………………………………………………………………………………27 Modèles ……………………………………………………………………………………………………………………………………………28 Réglages ……………………………………………………………………………………………………………………………………………28 9.
Page 55
15. Internet …………………………………………………………………………………………………………………………………………… 39 16. Opération de la caméra …………………………………………………………………………………………………………………… 40 17. Multimédia ……………………………………………………………………………………………………………………………………… 41 Lecteur audio ……………………………………………………………………………………………………………………………………41 Caméra ………………………………………………………………………………………………………………………………………………42 Magnétophone …………………………………………………………………………………………………………………………………42 Galerie ………………………………………………………………………………………………………………………………………………42 18. Bluetooth ………………………………………………………………………………………………………………………………………… 43 19. Méthode de saisie de texte ……………………………………………………………………………………………………………… 44 Annexe I Diagnostics d'erreurs courantes ………………………………………………………………………………………………… 45 Annexe II Abréviations et explications ………………………………………………………………………………………………………...
Page 56
1. Sécurité et précautions • Fermez le téléphone mobile à proximité des usines chimiques, des stations-service et autres lieux contenant des objets explosifs. • Gardez le téléphone mobile éloigné des petits enfants. • Fermez le téléphone mobile si les indications le demandent. •...
Page 57
• Le fabricant d'origine du téléphone mobile n'honorera aucune garantie ou assurance si les instructions ci-dessus ne sont pas suivies par l'utilisateur du téléphone mobile. • Veuillez recycler les piles au lithium-ion ou les éliminer correctement. N'éliminez pas les piles en les jetant avec les ordures ménagères.
Page 59
Côté droit Côté gauche 3. Démarrage Contenu de la boîte • 1 téléphone • 1 pile • 1 chargeur microUSB pour prise murale • 1 manuel de l'utilisateur • 1 guide de démarrage rapide d'utilisateur Installation de la pile 1. Retirez le couvercle arrière du téléphone. Il y a une fente à l'arrière et en bas du téléphone pour insérer une pièce de monnaie ou un ongle.
Page 60
Avertissement : Si le téléphone est en marche lors du retirement de la pile, vous pouvez perdre les informations mémorisées. Charge de la pile Le téléphone est fourni avec un chargeur à 2 composants (câble USB et adaptateur c.a.) Pour charger le téléphone : Connectez le câble USB à...
Page 61
s'arrête automatiquement. • Pendant la charge, il est normal que le téléphone et la pile chauffent légèrement. Lorsque la température de la pile augmente, le téléphone se protège automatiquement en prolongeant le temps de charge. • Le téléphone émet une alerte lorsque la pile est déchargée. Lorsque la pile est complètement déchargée, le téléphone s'arrête automatiquement.
Page 62
soit correctement installée dans le logement. 3. Fermez le couvercle et verrouillez le logement de la carte microSD en faisant glisser délicatement le couvercle vers le bas jusqu'à ce qu'il émette un déclic. 4. Réinsérez la pile et le couvercle arrière en suivant les instructions ci-dessus concernant la pile. 4.
Page 63
Navigation est utilisé pour sélectionner un élément. La touche programmable gauche est utilisée pour accéder au menu. La touche Retour de menu/Touche programmable droite est utilisée pour retourner au menu précédent. Les fonctions des deux touches programmables dépendent de l'application et des fonctions auxquelles vous accédez.
Page 64
Modes d'alerte Il existe plusieurs tonalités optionnelles à l'utilisateur, disponibles pour les notifications de message de texte et d'appel. Veuillez suivre les chemins ci-dessous pour sélectionner les modes et les tonalités particulières à chaque type. Pour les alertes de message de texte : 1.
Page 65
Itinérance Bluetooth Créer nouveau message de texte Boîte de réception Lecteur audio Boîte d'envoi Caméra Boîte des messages envoyés Magnétophone Boîte des brouillons Recherche Supprimer 6. Opérations de base Mise en marche du téléphone Appuyez sur la touche Fin/Marche/Arrêt et maintenez-la enfoncée pendant 5 à 6 secondes. Le téléphone cherchera automatiquement le réseau s'il n'a pas de protection par mot de passe.
Après la mise en tension, si un mot de passe est requis pour le téléphone, veuillez saisir le mot de passe, puis appuyer sur la touche programmable droite pour valider. Après le déverrouillage, le téléphone affichera l'intensité du signal. Mise à l'arrêt du téléphone Appuyez sur la touche Fin/Marche/Arrêt et maintenez-la enfoncée pendant 5 à...
Composition à l'aide de l'historique des appels Appuyez sur la touche Répondre/Envoyer, sélectionnez le numéro sur la liste et appuyez de nouveau sur la touche Répondre/Envoyer. Fin d'un appel Appuyez sur la touche Fin/Marche/Arrêt. Lorsqu'un appel est terminé, la minuterie d'appel s'arrête et le texte « Call Ended » (Appel terminé) s'affiche sur l'écran.
Saisissez les numéros de contact. Appuyez sur la touche programmable gauche pour sélectionner OK. 10. Appuyez sur Enregistrer, puis appuyez sur la touche programmable gauche pour sélectionner Oui et enregistrer le contact. Mise en sourdine d'une sonnerie Appuyez sur la touche # et maintenez-la enfoncée pendant 3 secondes. Pour passer de la sonnerie au vibreur, appuyez sur la touche # et maintenez-la enfoncée pendant 3 secondes.
Page 69
Navigation dans les menus Utilisez la touche Navigation, puis appuyez sur la touche Sélection (au centre de la touche Navigation). Le menu de l'écran d'Attente a cinq options : Contacts, Messages, Multimédia, Calendrier et Portail d'info. Sélection de menu d'écran d'Attente Contacts Messages Multimédia...
Profils Réglages Bluetooth Téléchargements Chaque groupe de menus est divisé en sous-menus de plusieurs éléments. Les fonctions de menu peuvent vous permettre de définir, vérifier ou modifier les divers réglages fonctionnels du téléphone pour satisfaire vos exigences personnelles. Veuillez vous reporter à la « Liste des options de menu » ci-dessous pour sélectionner les fonctions que vous souhaitez.
a. Sélectionnez Messagerie de texte (pour les messages de texte simples, d'un maximum de 140 caractères), puis sélectionnez Boîte de réception b. Messagerie d'image (pour les fichiers multimédias joints (photos, vidéo, audio, etc.)), puis sélectionnez Boîte de réception Nouveau message de texte (SMS) Vous pouvez créer un message de texte dans ce menu.
• Annuler le message : Retour à l'interface de liste d'information. Boîte de réception La boîte de réception est utilisée pour lire les messages de texte reçus. Dans la boîte de réception, le téléphone peut mémoriser un maximum de 50 messages de texte. Vous pouvez appuyer sur la touche de navigation vers le haut et vers le bas pour naviguer dans la liste des messages.
sélectionnez l'option Enregistrer et envoyer dans le menu Envoyer à. • Supprimer : Supprimez le message que vous lisez actuellement. • Supprimer plusieurs : Supprimez plusieurs éléments • Éliminer message : Supprimez tous les messages de la boîte d'envoi • Nouveau message de texte : Créez un nouveau message de texte. Boîte des brouillons Après avoir modifié...
• État de mémoire : Affiche la quantité de mémoire utilisée pour les contacts et les messages de texte. • Signature : Définir les informations de signature. Supprimer • TOUT : Supprimez tous les textes de message enregistrés dans la boîte d'envoi, la boîte de réception, la boîte des messages envoyés et la boîte des brouillons.
Créer un message de photo (MMS) Pour créer un message de photo (MMS) 1. Sélectionnez l'icône Messages 2. Sélectionnez Messagerie de photo 3. Sélectionnez Créer messagerie de photo Dans Créer messagerie de photo, vous pouvez saisir les champs suivants : i.
• Supprimer : Supprimez le message MMS en cours. • Supprimer tout : Supprimez tous les messages MMS dans la boîte de réception. • Verrouiller/Déverrouiller : Dans le mode verrouillé, le message ne peut pas être supprimé. Boîte d'envoi Les messages MMS dont l'envoi a échoué ou qui sont envoyés sont enregistrés dans la boîte d'envoi. Les opérations suivantes peuvent être effectuées à...
• Supprimer tout : Supprimez tous les messages MMS dans la boîte de réception. • Verrouiller/Déverrouiller : Dans le mode verrouillé, le message ne peut pas être supprimé. Modèles Les messages MMS modifiés peuvent être enregistrés dans Modèles. Réglages Ce menu vous permet d'apporter les réglages suivants à la configuration d'envoi et de réception des messages. •...
9. Contacts Pour saisir un contact 1. Sur le Menu principal, sélectionnez l'icône Contacts . 2. Sélectionnez Créer nouveau contact. 3. Saisissez les différents champs des informations de contact. 4. Sélectionnez Enregistrer pour mémoriser les informations de contact. Pour composer à partir de votre liste de contacts 1.
des contacts. Le numéro 1 de composition abrégée est réservé pour la messagerie vocale, les numéros 2 à 9 peuvent être définis par l'utilisateur. Info de mémoire Affiche l'état de mémoire de l'annuaire téléphonique dans le téléphone. 10. Téléchargements Ce téléphone fournit l'accès à la fonction de téléchargement de catalogue BREW ™ (binary runtime environment for wireless, environnement de temps d'exécution binaire pour les appareils sans fil).
2. Appuyez sur la touche de navigation vers le haut et vers le bas pour sélectionner l'une des alarmes et appuyez sur la touche programmable gauche pour accéder au réglage d'alarme. 3. Appuyez sur la touche de navigation gauche et droite dans l'interface de réglage de réveil pour sélectionner le contenu du réglage de réveil.
1. Appuyez sur les touches de chiffre pour saisir une valeur. 2. Sélectionnez une opération. 3. Appuyez sur les touches numériques pour saisir la deuxième valeur de l'opération. 4. Sélectionnez la touche =. Le résultat sera affiché sur l'écran. Pour effectuer de multiples opérations mathématiques, vous devez appuyer sur = après chaque opération. Chronomètre Cette unité...
Programmer : Vous pouvez programmer un événement dans le calendrier, avec la date, l'heure et une alarme pour vous avertir de cet événement, de la façon suivante : 1. Défilement à une date. 2. Sélectionnez « Option ». 3. Sélectionnez « Créer une note ». a.
12. Historique des appels Vous pouvez accéder à l historique des appels sur le menu principal en sélectionnant l'icône Historique des appels à partir du menu principal. Appels en absence S'il existe des appels en absence, vous pouvez visualiser les informations détaillées des appels en absence dans le menu «...
Appels composés Le téléphone enregistre automatiquement les 20 plus récents appels composés. Les fonctions et le mode d'affichage sont les mêmes que pour les appels en absence. Supprimer relevés • Supprimer les appels en absence : Supprimez tous les relevés d'appels en absence. •...
Remarque : Dans le Mode avion, veuillez consulter le personnel de la ligne aérienne concernant l'utilisation du Mode avion pendant le vol. Arrêtez votre téléphone si le personnel de la ligne aérienne vous le demande. Le Mode avion arrête les fonctions d'appel du téléphone dans les lieux où l'utilisation des téléphones sans fil est interdite.
Configuration du téléphone • Langue : Choisissez anglais ou français • Message d'accueil : Alterner entre Activer et Désactiver. Le message d'accueil est indiqué lorsque le téléphone est mis en marche et peut être modifié en mettant en surbrillance le message d'accueil en cours et en appuyant sur la touche programmable gauche/menu.
État : Désactiver/Activer. Liste noire : Un maximum de neuf entrées de liste noire peuvent être ajoutées. Vous pouvez modifier la liste sur ce menu. Configuration de sécurité Pour effectuer des modifications dans le menu Sécurité, vous devez saisir correctement le mot de passe du téléphone.
• Restaurer les réglages d'usine : Cette fonction est utilisée pour restaurer les réglages aux valeurs initiales par défaut. Info de téléphone Affiche les renseignements concernant le téléphone. 15. Internet Pour accéder à l'Internet, sélectionnez l'icône Internet sur le menu principal. Cette fonction vous permet de naviguer sur l'Internet avec votre téléphone.
Nouveau répertoire : Ajoutez un nouveau répertoire. Détails : Visualisez les détails du signet sélectionné. Réinitialiser : Réinitialisez les réglages par défaut. • Boîte d'alerte WAP : Enregistrer des informations sur les messages pour notifier l'utilisateur des messages du site WAP. •...
17. Multimédia Les fonctions multimédias peuvent être sélectionnées par l'icône Multimédia. Lecteur audio Le lecteur de musique est fourni pour que vous puissiez reproduire tous les types de fichiers musicaux enregistrés sur le téléphone cellulaire ou la carte de mémoire. Les formats de fichiers musicaux supportés incluent : MP3, MIDI, AMR, AAC, WAV et QCP.
Lorsque le lecteur audio est activé, les boutons sur le côté gauche du téléphone fournissent les choix suivants : Retour/Sélection précédente, Pause/Lecture et Avance/Sélection suivante. Caméra La caméra est aussi accessible dans cet écran de menu. Voir la section sur la caméra pour de plus amples détails.
répertoires du système par défaut, les répertoires de données créés et les fichiers de compte seront indiqués dans le répertoire racine (le répertoire racine contiendra seulement les dossiers du système la première fois que le téléphone sera mis en marche ou si l'utilisateur n'a pas encore créé de répertoires). 4.
o Appareiller : Jumeler avec l'appareil sélectionné. o Retirer : Retirez l'appareil sélectionné de la liste. o Naviguer fichiers : Lorsque vous naviguez dans les fichiers, l'appareil sélectionné doit être appareillé avec succès. o Configurer Bluetooth : Activer ou désactiver Bluetooth, renommer et état de dispositif. 19.
Annexe I Diagnostics d'erreurs courantes Problème Raisons possibles Le téléphone ne peut pas 1. Assurez-vous que la pile est chargée. être mis en marche 2. Assurez-vous que la pile est installée correctement. 1. Vérifiez si le chargeur est connecté correctement au téléphone. La pile ne peut pas être 2.
Annexe II Abréviations et explications Multimedia Message Service (service de messagerie multimédia) Short Message Service (messagerie SMS) *Avis de non responsabilité de couverture : Divers services sur cet appareil, tels que l'itinérance, peuvent nécessiter des mises à niveau ou des frais additionnels facturés par le fournisseur. Veuillez contacter votre fournisseur pour des renseignements supplémentaires.
Page 96
Règlementation de la FCC : Ce téléphone mobile est conforme à la partie 15 des Règlements de la FCC. Son opération est sujette aux deux conditions ci-après : (1) Cet appareil ne doit pas causer d'interférence nuisible, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement non souhaité.
Page 97
▶ Renseignements concernant l'exposition RF (DAS) Ce téléphone mobile satisfait aux exigences gouvernementales pour l'exposition aux ondes radio. Ce téléphone est conçu et fabriqué de façon à ne pas dépasser les limites d'émission pour l'exposition à l'énergie de radiofréquence (RF) déterminées par la Commission fédérale des communications (FCC) du Gouvernement des É.-U.
Page 98
ce modèle de téléphone sont déposés auprès de la FCC et peuvent être trouvée sous la section Display Grant (Afficher les octrois) de http://www.fcc.gov/oet/fccid après avoir cherché l'ID FCC U46-M570 Pour l'utilisation de ce téléphone porté sur le corps, le téléphone a été testé et satisfait aux directives d'exposition RF de la FCC pour l'utilisation avec un accessoire qui ne contient pas de métal et aux positions du combiné...