Related Manuals for Electrolux EHG7762X
Summary of Contents for Electrolux EHG7762X
- Page 1 Gas hob - Газовая варочная поверxноcть INSTRUCTION BOOKLET РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ Mod./ Moд. EHG 7762 CZ-HR-SK-SLO-RO-RU 35687-2502...
-
Page 2: Important Safety Information
ENGLISH Important Safety Information These warnings are provided in the interest of safety. You read them carefully before installing MUST or using the appliance. About Installation, Cleaning and Manteinance • It is mandatory that all operations required for the • Under no circumstances should you attempt to repair installation are carried out by a qualified or competent the appliance yourself. -
Page 3: Table Of Contents
73/23 - 90/683 (Low Voltage Directive); 89/336 (Electromagnetical Compatibility Directive); 90/396 (Gas Appliances) MANUFACTURER: 93/68 (General Directives) ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna 298 - 47100 FORLI’ (Italy) and subsequent modifications. Instruction for the User Hob Burners Control Knobs The hob burners control knobs are situated on the hob front panel. -
Page 4: Using The Hob Correctly
Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a Burner minimum maximum bottom fitting the size of the burner used, so that flame diameter diameter will not spread beyond the bottom of the vessel (see the table beside). -
Page 5: Maintenance And Cleaning
Maintenance and Cleaning Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. Wash the enamelled components with warm soapy water. -
Page 6: Service And Original Spare Parts
Periodic Maintenance Periodically ask your local Service Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. To ensure the good operation of the hob and its safety features, it is necessary that the taps are periodically lubricated. -
Page 7: Instruction For The Installer
Instruction for the Installer Gas Connection The following instructions about installation and " " " " " maintenance must be carried out by qualified personnel in compliance with the regulation in Choose fixed connections or use a flexible pipe in force. -
Page 8: Electrical Connection
Electrical connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label);... -
Page 9: Adaptation To Different Types Of Gas
Adaptation to different types of gas ! ! ! ! ! Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see Table "Injectors"). -
Page 10: Building In
Building In Fig. 9 A = Auxiliary burner SR = Semi rapid burner R = Rapid Burner UR = Ultra rapid burner (triple crown) This hob can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. - Page 11 Possibilities for Fig. 14 Fig. 13 insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig.