Page 1
User manual Notice d’utilisation Electronic Gas Hob Table de cuisson électronique à gaz EHS 7043 K...
Page 3
Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable.
English The innovative features of your gas hob Your new gas hob offers several innovative functions that distinguish it from Residual heat indicator to advise conventional gas hobs. that the pan supports and the burners are still hot. Electronic control of all functions.
Contents For the User The innovative features of your gas hob ............3 For your safety ....................5 Description of the hob ..................7 Operating instructions ..................8 Touch controls ................... 8 How to light a burner .................. 9 How to turn off a burner ................11 In case of ignition failure ................
For your safety This new appliance is easy to use. Nevertheless, it is important to carefully read this booklet before installing or using the appliance for the first time. This will allow you to obtain best performance, avoid improper actions, use the appliance in complete safety and also respect the environment.
Page 7
or industrial purposes. make it unusable, by cutting off the It is dangerous to modify or try to modify cable. the characteristics of this product. Keep the appliance clean. Food residuals The symbol on the product or on its increase the risk of fire. packaging indicates that this product may This appliance cannot be cleaned with not be treated as household waste.
Description of the hob Timer control zone Semirapid Semirapid burner burner Child Safety Control Main Auxiliary Rapid ON/OFF burner burner Rear switch left Rear right burner burner control control zone zone Front right Front left burner burner control zone control zone Guide to Use the instructions The following symbols will be found in the text to guide you throughout the...
Operating instructions Before using the appliance, remove all packaging, including the advertising labels and any protective film. Touch Controls The hob is supplied with special Touch Controls. To operate your hob, simply touch the required control with a fingertip. Ensure to only touch one control at a time during use.
" How to light a burner 1. Touch the main ON/OFF Control about 3 seconds to switch on the hob. The red indicator next to the touch control lights up, an acoustic signal sounds and the hob is ready to use. 2.
Page 11
- If touch control is selected, the burner automatically lights at medium flame level (three flame level indicators illuminate). 4. To adjust the burner flame level, use the Increasing or Decreasing Touch Control. The residual heat indicator lights up immediately after the burner is lit. This means that the cooking zone is getting hot: the indicator remains on until the pan support and the burner have...
" How to turn off a burner 1. To turn off a burner press the relevant Burner Ignition Touch Control . All the flame level indicators go off. The residual heat indicator remains on until the pan support and the burner have cooled down.
" In case of accidental extinguishing (automatic reignition) If the burner flame is accidentally extinguished (draughts, spilling of liquids, etc.), the gas flow is immediately interrupted. After about 20 seconds, the ignition device automatically repeats the ignition procedure. Upon reignition, the burner flame is first set at maximum level, then it is automatically adjusted to the level set before it was accidentally extinguished.
" How to turn off all the burners at once In case of unexpected safety hazard (spilling of liquids, children hazard, etc.), you can immediately turn off all the hob burners at once by touching the main ON/OFF Control " Burner Safety Cut-off Function If you leave one or more burners lit and...
" Protection against overheating If the hob is used intensively, e.g. several burners at maximum level for a long time, a temperature sensor detects possible overheating and automatically adjusts all the lit burners to minimum. If the hob temperature keeps rising although the flame level has been reduced, all the lit burners are automatically turned off and a safety device is set on all the four...
“Lock” Control for about 3 seconds. The red indicator next to the “Lock” symbol goes off and an acoustic signal sounds. It is highly recommended to activate the child safety function every time the hob is not operated. In case of a power failure, the hob stores the children safety function setting in the system memory.
" How to programme a burner to switch off To programme a burner to switch off, proceed as follows: 1. If necessary, activate the hob by touching the main ON/OFF Control for about 3 seconds. 2. Light the burner and adjust the flame level using the Increasing or Decreasing controls (see par.
Page 18
5. The timer starts the countdown a few seconds after the cooking time has been set. 6. During the last ten seconds, the timer starts beeping to advise that the cooking time is about to end. 7. An acoustic signal sounds at the end of the cooking time.
" How to set the Minute Minder Function You can use the timer as a simple minute minder when none of the burners are operating. The hob must be activated in order to use the timer as a minute minder. Proceed as follows: 1.
Safety and energy saving advice For a correct use of the hob To ensure maximum burner efficiency lower gas consumption, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table). If you use a saucepan which is Burner diameter diameter...
Cooking Table Recommended cooking time (Where no DISHES BURNER POWER recommendation is given, times should be set according to your personal requirements) Soups Broths 15-20 minutes Fish Court- bouillon Hollandaise Sauces Bechamel 10 minutes Aurore Endives Peas in sauce 25-30 minutes Vegetables Provence tomatoes 15-20 minutes...
Cleaning and maintenance Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply and wait until it has cooled down. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which...
In order to place the pan supports in the proper way, make sure that the longest arm of the pan support is positioned in correspondance with the hole placed at the base of the burner as shown in the picture. This way, the pan support will be stable and fixed.
Something not working Some operating problems may be solved with simple maintenance operations or and without the intervention of Technical Assistance. PROBLEM CAUSE SOLUTION ! There are blown fuses in the THE HOB !Have the fuses replaced. domestic electrical system. DOESN’T Switches are turned off or WORK...
Periodical maintenance Ensure that the condition and efficiency of the gas pipe and any pressure regulator are periodically checked. If any anomalies are detected, do not ask for repairing but always have the part replaced. Instructions for the Installer Technical Data Gas burner power Rapid burner (large) 2.9 kW (G20/G25) - 2.7 (G30/G31)
Instructions for the installer The following instructions about ! ! ! ! ! installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. The regulation to be applied for this type of installation is NBN D 5I.003 : "Installations functioning with combustible gas lighter than air".
Page 27
diameter and lenght of the tube in front and behind the meter; section of transit of variuos tubes positioned on the circuit; diameter of eventual connections. IMPORTANT To ensure a correct operation, a saving of energy and the long- life of the appliance, the voltage pressure of the appliance must correspond to the recommended values.
Electrical connection Replacing the power The appliance is designed to be connected to 230 V monophase electricity supply. cable The connection must be carried out in When replacing the cable, only use compliance with the laws and regulations in H05V2V2-F (T90), H05 BB-F type cables force.
Adaptation to different types of gas Replacing the injectors 1. Remove the pan supports. 2. Remove the burner caps and crowns. 3. Using a 7 mm socket spanner unscrew and remove the injectors, then replace them with the ones required for the new type of gas (see table “Burner characteristics”).
Page 30
Burner characteristics BURNER NOMINAL REDUCED NORMAL POWER THERMAL THERMAL POWER POWER L.P.G. NATURAL GAS 28-30/37 mbar Inj. Inj. 1/100 1/100 20mbar 25mbar Auxiliary 0,33 0,095 0,111 Semi-rapid 0,45 0,181 0,210 Rapid Natural gas: 0,65 0,276 0,321 But/Prop:2,7...
Page 31
Setting the hob for the new gas type 1. If necessary, activate the top by touching the main ON/OFF Control for about 3 seconds. 2. Touch the Timer Control repeatedly to select the auxiliary burner (front left burner) on the burner selection display . 3.
5. Touch the Decreasing Control select the required type of gas. 6. After selecting the type of gas, switch off the hob touching the main ON/OFF Control 7. Touch the main ON/OFF Control again to reactivate the hob. The appliance is automatically set to the normal “User Mode”.
Page 33
3. If the minimum level is too low or not satisfactory to maintain the burner lit, touch the Increasing or Decreasing Control to carry out a fine adjustment (visual check). 4. Switch off the hob touching the main ON/ OFF Control...
Building In A = Auxiliary burner Dimensions are given in millimetres SR = Semirapid burner R = Rapid burner Fig. 1 The hob is designed to be inserted in modular kitchen units with depth of 550 - 600 mm and having proper characteristics. The building-in is also possible in modular units with a 600 mm width: in this case, the cut-out in the work top must be carried...
Page 35
Fitting the hob to the worktop Before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below.
Installation possibilities Building over a kitchen unit with door Proper arrangements must be taken in Fig. 5 designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig.
Page 37
Hanging furniture units or hoods must be placed at 650 mm. minimum from the hob (Fig. 6). The electronic gas hob can only be installed over a built-in oven equipped with cooling fan. If the hob is installed over a built-in oven equipped with pyrolytic cleaning function, the hob must not be in use...
Declaration of guarantee terms Declaration of guarantee terms Declaration of guarantee terms Declaration of guarantee terms Declaration of guarantee terms Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or after the guarantee period.
Page 39
13. A repair under guarantee does not mean that the normal guarantee period will be extended nor that a new guarantee period begins. 14. We give a twelve month guarantee for repairs, limited to the same defect. 15. Except in the event where liability is legally imposed, this declaration of guarantee terms excludes any compensation for damage outside the appliance for which the consumer wishes to assert his rights.
European guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications: •...