Page 1
Life's Good PLASMA Please read this manual carefuDly before operating your set and retain it for future reference. 60PN5700 P/NO : MFL67701717 (1304_REVO0) www.lg.com...
Page 2
MPORTANT SAFETY NSTRUCT IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warninq£ Follow all instructions. • Do not use this apparatus near water. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
Page 3
MPORTANTSAFETY NSTRUCTONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit It is recommended that appliances be from the apparatus. placed upon a dedicated circuit;...
Page 4
• If you smell smoke or other odors coming LG Electronics. Unauthorized modification from the TV, unplug the power cord and contact an authorized service center. could void the user's authority to operate this product.
Page 5
MPORTANTSAFETY NSTRUCTONS • Dot Defect For USA and Canada The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could This equipment has been tested and found see fine dots on the screen while you're to comply with the limits for a Class B digital viewing the TV.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
TABLE OF' CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL LICENSES WATCHINGTV Turning the TV on for the first time OPEN SOURCE SOFTWARE NOTICE USING THE USER GUIDE TABLE OF CONTENTS SPECIFICATIONS INSTALLATION PROCEDURE MAINTENANCE ASSEMBLING AND PREPARING Cleaning Your TV - Screen, frame,...
NSTALLAT ON PROCEDURE / ASSEMBL NG AND PREPAR INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.
Page 9
ASSEMBL NG AND PREP2_R Power Cord Owner's Manual Remote Control, Batteries (AAA) (See p.28) Stand Screws Ferrite Core Stand Body, Stand Base (See p.14) 7 EA, MSx16 (Depending on model) (See p.14) (See p. 11 ) Power Cord Holder (Depending on model) (See p.17)
Page 11
ASSEMBLNGAND PREPARNG (Depending on model) .._NOTE ......................................• How to use the ferrite core - If there are three ferrite cores, follow as shown in Figures 1-1, Figure 2, Figure 3 - If there are four ferrite cores, follow as shown in Figures 1-2, Figure 2, Figure 3 1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
ASSEMBLNGANDPREPARNG Parts buttons Remote Control Sensors Power Indicator Screen ..Speakers Button Description Scrolls through the saved channels. _'/_ Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. Changes the input source.
MBLNGAND RREP,t_RNG ° When transporting a large TV, there should Lifting moving be at least 2 people. ° When transporting the TV by hand, hold the TV as shown in the following illustration. When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of...
ASSEMBL NG AND PREPAR Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching stand If you are not mounting the TV to a wall, use the following instructions to attach the stand.
An optional wall mount can be used with your Lift and tilt the TV into its upright position on a LG Television. Consult with your local dealer for table. a wall mount that supports the VESA standard - Leave a 10 cm (4 inches) (minimum) space used by your TV model.
Page 16
• If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. • Do not over tighten the screws as this may cause damage to the TV and void your warranty.
MBLNGAND ARNG 1"7 Tidying cables Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. Gather and bind the cables with the cable holder. Cable Holder Power Cord Holder (Depending on model) r-_\,_,o CAUTIO •...
18 MAKNGCONNECTONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device's connection, refer to the manual provided with each device..
MAKNGCONNECTONS Connecting to a HD receiver, Player or VCR Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device, Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.
MAKNGCONNECTONS DVI to HDMI Connection Transmits digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
MAKNGCONNECTONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE • Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. •...
MAKNG CONNECTONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE • If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.
MAKNG CONNECTONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. •...
MAKNG CONNECTONS Connecting to a PC .._ NOTE • It is recommended to use the HDMI connection for the best image quality. • Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. •...
MAKNGCONNECTONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speakers. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
MAKNGCONNECTONS Connecting a USB Device Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. Choose input port t-o connect.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, insert batteries (I .5 V AAA) matching the (+) and (-) ends to the label inside the compartment, and close the battery cover.
Page 29
btOT CONT + VOL - Adjusts the volume level. Accesses your favorite channel list. SETTINGS Accesses the main menu, MUTE Qg" Mutes all sounds. ACHv Scrolls through the saved channels. | PAGE ! Moves to the previous or next screen. INFO @ Shows information on the current program.
W/_TCHNGTV WATCHING Turning the TV on for the first ..NOTE ..................time • To display images in the best quality for your home environment, select Home Use. When you turn the TV on for the first time, the • Store Demo is suitable for the retail Initial setting screen appears.
An index of key words present in the User Guide. Provides the detailed information on the functions of LG Smart TV when the Internet is connected. (it may not be available depending on the country!language.)
Less than 80 % Storage Temperature -20°C _ 60 °C (-4 °F _ 140 °F) Storage Humidity Less than 85 % (60PN5700-UA) Dimensions With stand t,386.8 x 874 x 340 (mm) (Width x Height x 54.5 x 34.4 x 13.3 (inch) Depth) 1,386.8 x 821.7 x 57 (mm)
Page 33
SPEC F CAT ONS iVert_ca_ FrequenCy Resolution Horizontal Frequency I Vertical Frequency ReSOlution Hodzontal (kHz) (Hz) (Hz) Frequency (kHZ) 640 x 480 31.469 59,94 31.469 59.94 720 x 480 31.50 60.00 800 x 600 37.879 60,31 44.96 59.94 024 x 768 48.363 60,00 1280 x 720...
MA NTENANCE MAINTENANCE Cleaning Your Clean your TV regularly to keep the best performance and to extend the product lifespan. Screen, frame, cabinet stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent.
Turn the TV off/on. When connecting to the PC, • Reconnect the HDMI cable. 'No Signal' or 'Invalid Format' is Restart the PC with the TV on. displayed. EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit 'www.lg.com'.
Page 39
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: ?IHE iSSUE • The home theater entertainment experience is a growing trend larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper...
Page 40
Life's Good inquires co_r _r enls vis}l wwwJg co_r ol caJJ_ 1-800-243-0000 USA,ConsuF_rUs÷F The model and serial number of the TV is 1-888-865-3026 USA,Co_<_<_,_ci_l us_,_ located on the back and/or one side of the TV. 1-888-542-2623 CANADA Record it below should you ever- need service. MODEL SERIAL www,...
Page 41
Life's Good EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn...
Page 42
KEY CODES KEY CODES • This feature is not available for all models. Code Function Note C°de Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button...
• LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 44
EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
Page 45
EXTERNALCONTROLDEVICESETUP Communication Parameters • Baud rate " 9600 bps (UART) • Stop bit 1 bit • Communication code : ASCII code • Data length " 8 bits • Parity None • Use a crossed (reverse) cable. Command reference list ,COMMA"O!,COM A"02 COMMA.D1 OMMAND2 Hexadecima,) (Hexadecimal)
Page 46
EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 47
EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute I_ To control Power Off of the set. on, TV will not display OSD.
Page 48
EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
Page 49
EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
Page 50
EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
Page 51
EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...