Table of Contents
Advertisement
HCD-EC709i P /EC909i P
SERVICE MANUAL
Ver. 1.0 2010.03
• HCD-EC709iP is the amplifi er, CD player, tuner
and iPod/iPhone section in MHC-EC709iP.
• HCD-EC909iP is the amplifi er, CD player, tuner
and iPod/iPhone section in MHC-EC909iP.
Î iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
Î iPhone is a trademark of Apple Inc.
Î MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and
omson.
Î All other trademarks and registered trademarks are of
TM
®
their respective holders. In this manual,
and
marks
are not speci ed.
Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(
e United States model only)
Front Speaker
With 12 ohm loads, both channels driven, from 120 – 10,000 Hz;
rated 70 watts per channel minimum RMS power, with no more than
0.7% total harmonic distortion from 250 milliwatts to rated output.
Ampli er section
e following measured at AC 120 V, 60 Hz
(North American model)
e following measured at AC 240 V, 50/60 Hz
(Australian model)
HCD-EC909iP
North American model:
Front Speaker
RMS output power (reference):
180 W + 180 W (per channel at 12 , 1 kHz)
Subwoofer
RMS output power (reference):
180 W (at 12 , 80 Hz)
Australian model:
Front Speaker
Power output (rated):
85 W + 85 W (at 12 , 1 kHz, 1% THD)
RMS output power (reference):
180 W + 180 W (per channel at 12 , 1 kHz)
Subwoofer
RMS output power (reference):
180 W (at 12 , 80 Hz)
HCD-EC709iP
North American model:
RMS output power (reference):
180 W + 180 W (per channel at 12 , 1 kHz)
Australian model:
Power output (rated):
85 W + 85 W (at 12 , 1 kHz, 1% THD)
RMS output power (reference):
180 W + 180 W (per channel at 12 , 1 kHz)
Inputs
PC IN (stereo mini jack): Sensitivity 800 mV, impedance 22 kilohms
Outputs
SPEAKERS: Impedance 12
SUBWOOFER (MHC-EC909iP only): Impedance 12
Sony Corporation
9-889-760-01
Audio&Video Business Group
2010C05-1
Published by Sony Techno Create Corporation
©
2010.03
Photo: HCD-EC909iP
SPECIFICATIONS
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
*
is output is the value measurement at a distance of 200mm
from the objective lens surface on the Optical Pick-up Block
with 7mm aperture.
Frequency response: 20 Hz − 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 88 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section:
Tuning range
North American model: 87.5 MHz − 108.0 MHz (100 kHz step)
Australian model: 87.5 MHz − 108.0 MHz (50 kHz step)
Intermediate frequency: 225 kHz
AM tuner section:
Tuning range
North American model:
530 kHz − 1,710 kHz (10 kHz step)
531 kHz − 1,710 kHz (9 kHz step)
Australian model:
531 kHz − 1,710 kHz (9 kHz step)
530 kHz − 1,710 kHz (10 kHz step)
Intermediate frequency: 53 kHz
Australian Model
Model Name Using Similar Mechanism
Base Unit Name
Optical Pick-up Block Name
General
iPod/iPhone section
Compatible iPod/iPhone models:
Power requirements:
North American model: AC 120 V, 60 Hz
Australian model: AC 230 V − 240 V, 50/60 Hz
Power consumption:
HCD-EC909iP
North American model: 250 W
Australian model: 250 W
iPhone 3GS
iPhone 3G
iPhone
(0.5 W at the Power Saving Mode)
HCD-EC709iP
North American model: 200 W
Australian model: 200 W
(0.5 W at the Power Saving Mode)
Dimensions (W/H/D) (excl. speakers):
iPod nano
Approx. 200 mm × 306 mm × 389 mm
iPod classic
5th generation
iPod touch
120GB
Mass (excl. speakers):
(video camera)
2nd generation
160GB (2009)
HCD-EC909iP
Approx. 5.7 kg
HCD-EC709iP
Approx. 5.5 kg
Design and speci cations are subject to change without notice.
iPod nano
iPod classic
4th generation
iPod touch
160GB (2007)
(video)
1st generation
W
Standby power consumption: 0.5 W
W
Halogenated ame retardants are not used in the certain printed
wiring boards.
iPod nano
3rd generation
iPod nano
iPod classic
(video)
2nd generation
80GB
(aluminum)
iPod nano
iPod
iPod
1st generation
5th generation
4th generation
(video)
(color display)
iPod mini
iPod
4th generation
COMPACT DISC RECEIVER
US Model
Canadian Model
NEW
BU-D1BD73
DA11MMVGP
Advertisement
Table of Contents
Related Manuals for Sony HCD-EC709iP - Cd Deck Receiver Component
Summary of Contents for Sony HCD-EC709iP - Cd Deck Receiver Component
- Page 1 1st generation 5th generation SPEAKERS: Impedance 12 4th generation (video) (color display) SUBWOOFER (MHC-EC909iP only): Impedance 12 iPod mini iPod 4th generation COMPACT DISC RECEIVER Sony Corporation 9-889-760-01 Audio&Video Business Group 2010C05-1 Published by Sony Techno Create Corporation © 2010.03...
- Page 2 LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC- TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON- NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
-
Page 3: Table Of Contents
HCD-EC709iP/EC909iP TABLE OF CONTENTS SERVICING NOTES 5-5. Schematic Diagram - BD73 Board - ....... 19 ..........5-6. Printed Wiring Boards DISASSEMBLY - iPod & iPhone, JACK Section - ........20 5-7. Schematic Diagram 2-1. Disassembly Flow ............- iPod & iPhone, JACK Section - ........21 2-2. -
Page 4: Servicing Notes
HCD-EC709iP/EC909iP SECTION 1 SERVICING NOTES MODEL IDENTIFICATION NOTES ON HANDLING THE OPTICAL PICK-UP - Back Panel - BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc. - Page 5 HCD-EC709iP/EC909iP CAPACITOR ELECTRICAL DISCHARGE PROCESSING When checking the board, the electrical discharge is necessary for the electric shock prevention. Connect the resistors referring to the fi gure below. • POWER board (C103, C104) Both ends of respective capacitors. – POWER Board (Conductor Side) – 800 :/2 W C103 C104...
-
Page 6: Disassembly
HCD-EC709iP/EC909iP SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2. SIDE PANEL (L)/(R) 2-3. ORNAMENT PLATE (DOCK) OR iPod ASSY (Page 6) (Page 7) 2-5. TOP PANEL BLOCK 2-4. IP BOARD BLOCK, BASE (DOCK) BLOCK (Page 8) (Page 8) 2-6. -
Page 7: Ornament Plate (Dock) Or Ipod Assy
HCD-EC709iP/EC909iP 2-3. ORNAMENT PLATE (DOCK) OR iPod ASSY 2 Push in flat-head screwdriver. Note 1: Avoid a claw and put a flat-head screwdriver in. 3 claw 2 Push in flat-head screwdriver. 1 Open the iPod dock. Note 1: Avoid a claw and put a flat-head screwdriver in. -
Page 8: Ip Board Block, Base (Dock) Block
HCD-EC709iP/EC909iP 2-4. IP BOARD BLOCK, BASE (DOCK) BLOCK Note 1: This illustration sees the front panel from bottom side. 1 four screws (B2.6) 5 Remove two solders. Never put the sheet to the claw. 6 IP board block 2 sheet 4 flexible flat cable (13 core) (CN901) 0 boss... -
Page 9: Back Panel Block
HCD-EC709iP/EC909iP 2-6. BACK PANEL BLOCK (EC909iP) 3 screw (BVTP3 K 10) 3 screw (BVTP3 K 10) 4 back panel block 3 three screws (BVTP3 K 10) 2 fan connector (CN051) 1 Cut the wire holder. Note: In reassembling, use new wire holder to fasten the wire holder same as before. -
Page 10: Front Panel Block
HCD-EC709iP/EC909iP 2-8. FRONT PANEL BLOCK 3 Remove clamping. 5 sheet 1 flexible flat cable (25 core) 9 front panel block (CN603) Note 1: Confirm it is unquestionable for the open/close of the iPod dock after the lead wire is processed. 4 filament tape sheet... -
Page 11: Base Unit (Bu-D1Bd73)
HCD-EC709iP/EC909iP 2-10. BASE UNIT (BU-D1BD73) Note 1: This illustration sees the top panel block from base unit side. (EC709iP) 5 two vibration proof rubbers 2 stopper (D1) (green) 1 four floating screws (PTPWHM2.6) 8 base unit 4 two vibration proof rubbers (BU-D1BD73) (red) 6 four claws... -
Page 12: Test Mode
HCD-EC709iP/EC909iP SECTION 3 TEST MODE COLD RESET CD SERVICE MODE The cold reset clears all data including preset data stored in the This mode can move the SLED of the optical pick-up, and also can memory to initial conditions. Execute this mode when returning turn the optical pick-up laser power on and off. -
Page 14: Block Diagram - Cd Servo, Tuner Section
I-TU-ANSD O-TU-CE O-TU-CLK I-TU-DO O-TU-DI... -
Page 15: Block Diagram - Main Section
SCLK O-AUDIO-CLK SDATA O-AUDIO-DATA... -
Page 16: Block Diagram - Panel, Power Supply Section
100,... -
Page 18: Printed Wiring Board - Bd73 Board
CL403 CL406 CL405 CL404 SP– CL121 CL116 C112 C111 R113 C110 C101 SL– SP–... -
Page 19: 5-5. Schematic Diagram - Bd73 Board
0 R417 DVDD VVSS3 PCMLRSY VVDD3 PCMBCK DVDD15 PCMDA DVSS PCMREQ DVDD DVDD15 A(C2F) STDA DVSS STCK(FSEQ) DVDD STREQ(DEFECT) DOUT LIMIT-SW(CONT3) CL121 CONT4 CONT5(M-MUTE) CL120 XVSS VVDD1 XOUT PCKIST PDOUT0 CL106 XVDD PDOUT1 CL105 LRVDD VVSS1 LCHO SPDO LRREF SLDO RCHO LRVSS SLCO... -
Page 20: Printed Wiring Boards - Ipod & Iphone, Jack Section
R909 R908 R905 R906 TP9021 TP902 TP903 TP905 TP906 TP907 TP908 1-881-317- TP909... -
Page 21: 5-7. Schematic Diagram 6 - Ipod & Iphone, Jack Section
MODE1 MODE0 I2C_SDA RESET I2C_SCL... -
Page 22: 5-8. Printed Wiring Board 8 - Main Board (Component Side)
C727 C789 C788 C728 C787 C786 C729 C785 C784 C783 C719 R813 R812 Q803 Q804 C638 C699 C637 C809 R610 R642 C879 C654 C878 C877 C876... -
Page 23: 5-9. Printed Wiring Board 9 - Main Board (Conductor Side)
R736 R786 R785 R784 C714 R781... -
Page 24: 5-10. Schematic Diagram - Main Board (1/2)
R718 C768 C792 R720 R704 C767 470p C704 R706 R703 C766 C794 R705 L-OUT-(+) R717 L-OUT-(-) C769 L-OUT+(+) C791 L-OUT+(-) R719 L-IN-(-) 100p 16V 47 C707 C705 C727 R773 C712 L-IN-(+) 470p R707 C703 L-IN+(+) 100p C708 C706 C728 R708 C793 L-IN+(-) 1.5k... -
Page 25: Schematic Diagram - Main Board (2/2)
2SC3052F-T1-LF Q804 R621 R622 R623 22p C682 C809 iPod-R iPod-L 0.47 C649 TUNER-R 4.7k R648 C654 SCLK TUNER-L 4.7k R647 C653 CD-R R834 R652 C658 CD-L R651 C657 SB-R AUDIO-R 4.7k 0.022 R656 C662 C671 SURR C868 AUDIO-L C661 SB-L SEL-L R836 R677... -
Page 26: Printed Wiring Board - Panel Board
JW301 JL355 R368 R407 JW369 JW395 JW398 JW391 JW399 JW380 JW400 JW323 JW325 C348 C349 JW329 JW326 JL362... -
Page 27: Schematic Diagram - Panel Board
SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 I/O-IPOD-CLK SEG16 SEG15 I/O-IPOD-DAT SEG14 SEG16 SEG16 SEG13 SEG17 SEG17 SEG12 SEG18 I/O-iPhone-CP-CLK I-TU-DO SEG18 I-TU-DO SEG1 SEG19 I/O-iPhone-CP-DAT I-SUFFIX SEG19 I-SUFFX SEG10 SEG20 I-MODEL SEG20 I-MODEL... -
Page 28: Printed Wiring Board - Power Board
TP122 R126 R131 C162 JW009 JW033 JW008... -
Page 29: Schematic Diagram - Power Board
15.6 <0.4> <0.9> <0.5> <0.5> 110GLS0 MA2J1 D108 2SC3052F-T1-LF Q102 2SC3052F-T1-LF Q101 MAZ8043GMLS0 D051 10GMLS0 MAZ81 D052... - Page 30 R-OUT L-OUT GND1 (3.3V) VREF2 (4.3V) VREF1 GND3 (4.3V) VREF3 REGULATOR GND4 VVSS3 VVDD3 DVDD DVDD15 PCMLRSY DVSS PCMBCK PCMDATA DVDD PCMREQ DVDD15 FSEQ DVSS DEFFECT DVDD CONT3 DOUT CONT5 CONT4 VVDD1 XVSS PCKIST XOUT PDOUT0 PDOUT1 XVDD LRVDD VVSS1 LCHO SPDO LRREF...
- Page 31 HCD-EC709iP/EC909iP IC601 BD3499FV-E2 IC604 STK433-870-E IC606 STK433-070-S-E 28 FIL INPUT INPUT 27 GND GAIN SELECTOR PRE DRIVE PC BUS 26 SDA FINAL DRIVE PRE DRIVE LOGIC 25 SCL SEL2 INVERTER FINAL DRIVE STANDBY SEL1 24 VCC CIRCUIT VOL1 VOLUME VOL2 23 OUT1 SURROUND TREBLE/...
- Page 32 HCD-EC709iP/EC909iP • IC Pin Function Description PANEL BOARD IC301 MB90F830PF-GE1 (SYSTEM CONTROLLER) Pin No. Pin Name Description SEG32 Segment drive signal output to the liquid crystal display O-SP-RELAY Relay drive signal output terminal (for speaker) O-POWER Main power on/off control signal output terminal “H”: main power on O-CD-ON CD power on/off control signal output terminal...
- Page 33 HCD-EC709iP/EC909iP Pin No. Pin Name Description 63, 64 SEG0, SEG1 Segment drive signal output to the liquid crystal display Power supply terminal (+3.3V) Ground terminal 67 to 89 SEG2 to SEG24 Segment drive signal output to the liquid crystal display Power supply terminal (+3.3V) Ground terminal Main system clock output terminal (6 MHz)
-
Page 34: Exploded Views
HCD-EC709iP/EC909iP SECTION 6 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference The components identifi ed by mark 0 they may have some difference from the number in the exploded views are not sup- or dotted line with mark 0 are critical for original one. -
Page 35: Top Panel Section
HCD-EC709iP/EC909iP 6-2. TOP PANEL SECTION not supplied S351 (including sled motor, spindle motor) not supplied not supplied (spindle motor) not supplied not supplied (sled motor) (EC709iP) S001 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1748-697-A BD73 BOARD, COMPLETE 3-047-468-11 DAMPER... -
Page 36: Front Panel Section
HCD-EC709iP/EC909iP 6-3. FRONT PANEL SECTION not supplied (JACK HOLD board) not supplied (JACK board) not supplied not supplied (COVER board) Note: The hole of the front panel that passes the fl exible fl at cable (13 core) and the wire from the IP board block is different. Please pass it through a correct hole respectively. -
Page 37: Ipod Dock Section
HCD-EC709iP/EC909iP 6-4. iPod DOCK SECTION not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-120-664-02 PLATE, ORNAMENT (DOCK) (EC709iP) 3-277-576-01 ESCUTCHEON X-2348-584-1 IPOD ASSY (EC909iP) 4-120-666-01 LOCK (DOCK) 3-253-143-01 SCREW (B2.6), (+) P TAPPING X-2547-790-1 BASE (DOCK) ASSY A-1749-035-A... -
Page 38: Main Board Section
HCD-EC709iP/EC909iP 6-5. MAIN BOARD SECTION Note: Cover (tuner top) and cover (function top) cannot re-used. When these parts are removed, new parts must be replaced. (EC909iP) (EC909iP) not supplied not supplied not supplied #1 #1 not supplied not supplied M001 chassis section Ref. -
Page 39: Chassis Section
HCD-EC709iP/EC909iP 6-6. CHASSIS SECTION not supplied (POWER board) not supplied PT004 (AC HOLD board) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 254 4-162-453-01 CHASSIS (US) 1-834-967-21 CORD, POWER (AUS) 4-162-453-11 CHASSIS (CND) 4-225-252-01 CUSHION (FOOT) 0 PT004... -
Page 40: Electrical Parts List
HCD-EC709iP/EC909iP SECTION 7 BD73 ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- the parts list may be different from the uF: aF ber, please include the board name. parts specifi ed in the diagrams or the com- •... - Page 41 HCD-EC709iP/EC909iP BD73 JACK MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R201 1-218-446-11 METAL CHIP 1/10W R909 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R202 1-216-789-11 METAL CHIP 1/10W R910 1-218-892-11 METAL CHIP 0.5% 1/10W R203 1-216-864-11 SHORT CHIP R911...
- Page 42 HCD-EC709iP/EC909iP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C606 1-162-964-11 CERAMIC CHIP 0.001uF C671 1-164-227-11 CERAMIC CHIP 0.022uF C607 1-162-968-11 CERAMIC CHIP 0.0047uF C672 1-162-964-11 CERAMIC CHIP 0.001uF C608 1-162-970-11 CERAMIC CHIP 0.01uF C673 1-110-563-11 CERAMIC CHIP 0.068uF C609...
- Page 43 HCD-EC709iP/EC909iP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C732 1-100-566-91 CERAMIC CHIP 0.1uF C794 1-164-858-11 CERAMIC CHIP 22PF C733 1-128-991-21 ELECT CHIP 10uF C801 1-124-779-00 ELECT CHIP 10uF (EC909iP) C734 1-128-991-21 ELECT CHIP 10uF C735 1-126-969-11 ELECT...
- Page 44 HCD-EC709iP/EC909iP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C839 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V C873 1-162-923-11 CERAMIC CHIP 47PF (EC909iP) (EC909iP) C840 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V (EC909iP) C874 1-162-923-11 CERAMIC CHIP 47PF C841 1-137-765-21 ELECT CHIP...
- Page 45 HCD-EC709iP/EC909iP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR607 1-216-864-11 SHORT CHIP R616 1-216-817-11 METAL CHIP 1/10W JR608 1-216-864-11 SHORT CHIP R621 1-218-887-11 METAL CHIP 0.5% 1/10W R622 1-218-887-11 METAL CHIP 0.5% 1/10W JR609 1-216-864-11 SHORT CHIP R623...
- Page 46 HCD-EC709iP/EC909iP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R706 1-216-841-11 METAL CHIP 1/10W R707 1-216-817-11 METAL CHIP 1/10W R761 1-216-845-11 METAL CHIP 100K 1/10W R762 1-216-845-11 METAL CHIP 100K 1/10W R708 1-216-817-11 METAL CHIP 1/10W R763 1-216-797-11...
- Page 47 HCD-EC709iP/EC909iP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R821 1-216-809-11 METAL CHIP 1/10W R856 1-216-825-11 METAL CHIP 2.2K 1/10W (EC909iP) (EC909iP) R822 1-216-809-11 METAL CHIP 1/10W R857 1-216-817-11 METAL CHIP 1/10W (EC909iP) (EC909iP) R858 1-216-817-11 METAL CHIP 1/10W...
- Page 48 HCD-EC709iP/EC909iP PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1749-021-A PANEL BOARD, COMPLETE (EC909iP: US, CND) < IC > A-1749-022-A PANEL BOARD, COMPLETE (EC909iP: AUS) A-1749-023-A PANEL BOARD, COMPLETE (EC709iP: US, CND) IC301 A-1772-963-B IC MB90F830PF-GE1 (for SERVICE) A-1749-024-A PANEL BOARD, COMPLETE (EC709iP: AUS) IC302...
- Page 49 HCD-EC709iP/EC909iP PANEL POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R337 1-216-822-11 METAL CHIP 1.2K 1/10W < SWITCH > R340 1-216-833-11 METAL CHIP 1/10W R341 1-216-797-11 METAL CHIP 1/10W S301 1-762-875-21 SWITCH, KEYBOARD (I/1) (EC909iP) R342 1-216-809-11 METAL CHIP...
- Page 50 HCD-EC709iP/EC909iP POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C163 1-162-919-11 CERAMIC CHIP 22PF < RESISTOR > C164 1-162-923-11 CERAMIC CHIP 47PF R051 1-216-837-11 METAL CHIP 1/10W < CONNECTOR > R052 1-216-837-11 METAL CHIP 1/10W R053 1-216-837-11 METAL CHIP...
- Page 51 HCD-EC709iP/EC909iP POWER Ref. No. Part No. Description Remark R153 1-216-851-11 METAL CHIP 330K 1/10W R154 1-216-841-11 METAL CHIP 1/10W R155 1-216-833-11 METAL CHIP 1/10W R156 1-216-845-11 METAL CHIP 100K 1/10W R157 1-216-817-11 METAL CHIP 1/10W R158 1-216-827-11 METAL CHIP 3.3K 1/10W R159 1-216-827-11...
-
Page 52: Revision History
HCD-EC709iP/EC909iP REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2010.03...