hit counter script
LG 32WL30MS Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. 32WL30MS
  6. Owner's manual
LG 32WL30MS Owner's Manual

LG 32WL30MS Owner's Manual

Monitor signage
Hide thumbs Also See for 32WL30MS:
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating your set and retain it
for future reference.
MONITOR SIGNAGE MODELS
32WL30MS
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG 32WL30MS

Summary of Contents for LG 32WL30MS

  • Page 1 OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating your set and retain it for future reference. MONITOR SIGNAGE MODELS 32WL30MS www.lg.com...

  • Page 2: Table Of Contents

    CONTENTS CONTENTS LICENSES ENTERTAINMENT - Connecting to a wired network - Network Status ASSEMBLING AND - Connecting USB storage devices PREPARING - Browsing files Accessories - Viewing movies Optional Accessories - Viewing photos Parts and buttons - Listening to music Storage Method for Panel Protection - Viewing the Contents List - Correct Method - DivX® VOD Guide - Incorrect Method - Using PIP/PBP Connecting the Speakers Connecting the stand CUSTOMIZING SETTINGS To install in a Portrait Layout Using the Kensington security system Accessing the main menus Mounting on a wall - PICTURE settings - AUDIO settings...
  • Page 3 CONTENTS IR CODES CONTROLLING THE MULTIPLE PRODUCT Command reference list Transmission / Receiving protocol...

  • Page 4: Contents

    LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video- on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

  • Page 5: Assembling And Preparing

    ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. POWER MONITOR ENERGY INPUT SAVING . , ! PQRS WXYZ 1/a/A CLEAR - * # MARK BRIGHT NESS MUTE MENU AUTO S.MENU BACK TILE EXIT Remote Control and Batteries RGB Cable CD (Owner's Manual, SuperSign Power Cord Elite-w, SuperSign Elite-c Program/ SuperSign Manual) / Card CAUTION Do not use any pirated items to ensure the safety and product life span. Any damages or injuries by using pirated items are not covered by the warranty. NOTE The accessories supplied with your product may vary depending on the model.

  • Page 6: Optional Accessories

    ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. ST-320T SP-2000 Cable holder/ Stand Speaker Cable Tie Screws Screws Diameter 4.0 mm x Pitch 0.7 mm x Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm(Included Spring Washer) Length 8 mm(Included Spring Washer) Stand kit Speaker kit NOTE Cable holder/Cable tie may not be available in some areas or for some models. Optional accessories are not included for all models.

  • Page 7: Parts And Buttons

    ASSEMBLING AND PREPARING Parts and buttons Power Indicator LED On : Power is on LED Off: Power is off Screen Buttons Connection panel Screen Marks Description Turns the power on or off. AUTO/SET Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Adjusts the volume level. Adjust the up and down. MENU Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. IR Receiver This is where the unit receives signals from the remote control. Power Indicator Turns red when the monitor is turned on; blinks red when it is in Energy Saving mode. NOTE You can set the Power indicator to on or off by selecting OPTION in the main menu.

  • Page 8: Storage Method For Panel Protection

    ASSEMBLING AND PREPARING Storage Method for Panel Protection Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully If the product is tilted onto the bezel, the bottom of for. Do not let the panel not to touch the floor. the panel may be damaged. Panel Cushion Panel When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down. Panel If the product is tilted onto the edge of the panel, the panel may be damaged. If there is not a cushion available, ensure the floor is clean and then lay the product down carefully with the panel facing either upward or downward. At this time, be careful for objects not to fall on the panel.

  • Page 9: Connecting The Speakers

    ASSEMBLING AND PREPARING Connecting the Speakers Connecting the stand - Only on some models. - Only on some models. Connect an input signal cable to use before Place a soft cloth on the table and put the installing the speakers. product with the screen facing downward. Connect the stand as shown in the following picture. Mount the speaker by using a screw as shown in the following. Then connect the speaker cable. Use the screws to secure the stand on the rear side of the product as shown in the diagram. After installing your speakers, use holders and cable ties to organize the speaker cables.

  • Page 10: To Install In A Portrait Layout

    ASSEMBLING AND PREPARING To install in a Portrait Using the Kensington Layout security system When installing in a Portrait Layout, rotate the The Kensington security system connector is monitor clockwise 90 degrees (when facing the located at the back of the Monitor. For more screen). information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor and a table. NOTE The Kensington security system is optional. You can obtain additional accessories from most electronics stores.

  • Page 11: Mounting On A Wall

    ASSEMBLING AND PREPARING Mounting on a wall CAUTION Disconnect the power before installing or For proper ventilation, allow a clearance of 10 moving the monitor. Otherwise electric shock cm on each side and from the wall. Detailed may occur. installation instructions are available from your If you install the Monitor on a ceiling or dealer, see the optional Tilt Wall Mounting Bracket slanted wall, it may fall and result in severe Installation and Setup Guide. injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. D o not over tighten the screws as this may cause damage to the Monitor and void your warranty. 10cm U se screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. 10cm 10cm 10cm 10cm NOTE Use screws that are listed on the VESA standard screw specifications. The wall mount kit includes an installation If you intend to mount the Monitor to a wall, attach manual and necessary parts. Wall mounting interface (optional parts) to the back The wall mount bracket is optional. You can of the set. obtain additional accessories from your local When you install the Monitor using the wall dealer.

  • Page 12: Remote Control

    REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the POWER POWER ENERGY ENERGY INPUT INPUT MONITOR MONITOR MONITOR remote control sensor on the Monitor set. SAVING SAVING . , ! . , ! PQRS PQRS WXYZ WXYZ 1/a/A 1/a/A CLEAR CLEAR - * # - * # MARK MARK...
  • Page 13 REMOTE CONTROL POWER MONITOR ENERGY INPUT SAVING . , ! PQRS WXYZ 1/a/A CLEAR - * # MARK BRIGHT NESS POWER MUTE MENU MENU AUTO AUTO S.MENU S.MENU BACK BACK TILE TILE EXIT EXIT ENERGY INPUT MONITOR SAVING . , ! MENU (See p.37) PQRS WXYZ...

  • Page 14: Using The Monitor Set

    USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC RGB connection Transmits the analog video signal from your PC to Your Monitor set supports the Plug & Play* feature. the Monitor set. Connect the PC and the Monitor set with the 15 pin signal cable as shown the * Plug & Play: A PC will have a built-in driver for following illustrations. the monitor, no extra software is needed. Select RGB input. Back of the product. NOTE It is recommended to use the Monitor set with the HDMI connection for the best image quality. To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as D-sub 15 pin cable and DVI/HDMI cable provided with the product. If you turn the Monitor set on when the set becomes cold, the screen may flicker. This is (not included) normal. Macintosh Some red, green, or blue spots may appear Adapter on the screen. This is normal. (not included) RGB OUT AUDIO OUT CAUTION PC/MAC Connect the signal input cable and tighten NOTE it by turning the screws clockwise.

  • Page 15: Dvi Connection

    USING THE MONITOR SET DVI connection HDMI connection Transmits digital video signal from your PC to Transmits digital video and audio signals from your the Monitor set. Connect the PC and the Monitor PC to the Monitor set. Connect the PC and the set with the DVI cable as shown the following Monitor set with the HDMI cable as shown in the illustrations. following illustrations. Select DVI input. Select HDMI input. Back of the product. Back of the product. (not included) (not (not included) included) HDMI DVI OUT AUDIO OUT NOTE Use a High Speed HDMI™ Cable. Please check the PC environment if you cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI. If you want to use HDMI-PC mode, you must set the input label to PC mode. When HDMI PC is used, a compatiblity problem could occur.

  • Page 16: Adjusting The Screen

    USING THE MONITOR SET Adjusting the screen Customizing image options Customize basic and advanced options of each Selecting an image mode image mode for the best screen performance. Display images in its optimized settings by Press MENU to access the main menus. selecting one of the preset image modes. Press the Navigation buttons to scroll to Press MENU to access the main menus. PICTURE and press OK. Press the Navigation buttons to scroll to Press the Navigation buttons to scroll to PICTURE and press OK. Picture Mode and press OK. Press the Navigation buttons to scroll to Press the Navigation buttons to scroll to an Picture Mode and press OK. image mode you want and press OK. Press the Navigation buttons to scroll to an Select and adjust following options, and then image mode you want and press OK. press OK. Mode Description Option Description Vivid Adjusts the video image for the retail Backlight A djusts the brightness of the screen environment by enhancing the contrast, by controlling the LCD backlight. If brightness, color, and sharpness. you decrease the brightness level, Standard Adjusts the image for the normal the screen becomes darker and the environment.

  • Page 17: Customizing Pc Display Options

    USING THE MONITOR SET Adjusting the sound Customizing PC display options Customize options of each image mode for the Selecting an sound mode best image quality. Play the sound in its optimized settings by This function works in the following mode: selecting one of the preset sound modes. RGB[PC] mode. Press MENU to access the main menus. Press MENU to access the main menus. Press the Navigation buttons to scroll to Press the Navigation buttons to scroll to AUDIO and press OK. PICTURE and press OK. Press the Navigation buttons to scroll to Sound Press the Navigation buttons to scroll to Mode and press OK. Screen and press OK. Press the Navigation buttons to scroll to a Select and adjust following options, and then sound mode you want and press OK. press OK. Mode Description Option Description Standard Select when you want standard-quality Resolution Selects a proper resolution. See sound. “Customizing PC display options”. Music Select when you listen to music. Auto Sets to adjust the screen position, clock, Cinema Select when you watch movies. Config.

  • Page 18: Customizing Sound Options

    Press the Navigation buttons to scroll to Monitor set. AUDIO and press OK. Press the Navigation buttons to scroll to Sound Mode and press OK. CAUTION Press the Navigation buttons to scroll to a If a fixed image displays on the screen for sound mode you want and press OK. a long period of time, it could be imprinted and become a permanent disfigurement on Select and adjust following options, and then the screen. This is “image burn” or “burn-in” press OK. and not covered by the warranty. If the aspect ratio is set to 4:3 for a long Option Description period of time, image burn may occur on Infinite LG's Infinity Sound option provides 5.1 the letterboxed area of the screen. Sound channel stereo sound quality from two speakers. Treble Increases the intensity of the high frequency part of audio. Bass Increases the intensity of the low NOTE frequency part of audio. You can also change the image size by Reset Resets the sound mode to the default accessing the main menus. setting. When you are finished, press EXIT. When you return to the previous menu, press MODE...
  • Page 19 USING THE MONITOR SET - 16:9 : This selection will allow you to adjust the - 4:3 : This selection will allow you to view a picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the DVDs). screen. - Just Scan : This Selection will allow you view - Zoom : This selection will allow you to view the the picture of best quality without loss of original picture without any alteration, while filling the picture in high resolution image. Note: If there is entire screen. However, the top and bottom of noise in original Picture, You can see the noise the picture will be cropped. at the edge. Just Scan - 1:1 : The aspect ratio is not adjusted from the - Cinema Zoom : Choose Cinema Zoom when original. (Only HDMI PC, DVI-D PC, RGB PC) you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted.

  • Page 20: Using The Input List

    USING THE MONITOR SET Using the input list Selecting an input source Press INPUT to access the input source list. Press the Navigation buttons to scroll to one of the input sources and press OK. Input source Description AV(CVBS) Watch video from a VCR or other external devices. Component Watch the content from a DVD or other extemal devices, or through a digital set-top box View a PC display on the screen HDMI Watch contents from a PC, DVD of Digital set-top box other high definition devices DVI-D View a PC display on the screen Plays the multimedia file saved in the USB.

  • Page 21: Entertainment

    ENTERTAINMENT ENTERTAINMENT Connecting to a wired network To set up the network settings: (Even if your dis- play has already connected automatically, running setup again will not harm anything), Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra- Press MENU to access the main menus. tion and set up the network settings. Press the Navigation buttons to scroll to NET- Only supports wired network connection. WORK and press OK. After making a physical connection, a small number of networks may require the display net- Press the Navigation buttons to select Net- work settings to be adjusted. For most networks, work Setting and press OK. the display will connect to automatically without If you already set Network Setting, select any adjustments. Resetting. The new connection settings resets For detail information, contact your internet pro- the current network settings. vider or router manual. Select IP Auto Setting or IP Manual Setting. - If selecting IP Manual Setting, press the Navigation and Number buttons. IP address- es will need to be input manually. - IP Auto Setting: Select this if there is a DHCP server (Router) on the local area net- work (LAN) via wired connection, the display will automatically be allocated an IP address. Router If you’re using a broadband router or broad- Router band modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be deter- mined. When you are finished, press EXIT.

  • Page 22: Network Status

    Many network connection problems during set up can often be fixed by re-setting the router Network Status or modem. After connecting the display to the network, quickly power off and/or disconnect Press MENU to access the main menus. the power cable of the network router or cable modem. Then power on and/or connect the Press the Navigation buttons to scroll to NET- power cable again. WORK and press OK. Depending on the internet service provider Press the Navigation buttons to select Net- (ISP), the number of devices that can receive work Status. internet service may be limited by the applica- ble terms of service. For details, contact your Press OK to check the network status. ISP. When you are finished, press EXIT. LG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment. Option Description LG is not responsible for problems within your Setting Return to the network setting menu. internet connection. Test the current network status after set- You may experience undesired results if the Test ting the network. network connection speed does not meet the Close Return to the previous menu. requirements of the content being accessed. Some internet connection operations may not...

  • Page 23: Connecting Usb Storage Devices

    ENTERTAINMENT Connecting USB storage devices Tips for using USB storage devices Only a USB storage device is recognizable. Connect USB storage devices such as a USB If the USB storage device is connected flash memory, external hard drive to the display through a USB hub, the device is not recog- and use multimedia features (See "Browsing files" on page 24). nizable. Connect a USB flash memory or USB memory A USB storage device using an automatic card reader to the Display as shown on the follow- recognition programme may not be recog- ing illustration. The My media screen appears. nized. A USB storage device which uses its own driver may not be recognized. The recognition speed of a USB storage device may depend on each device. Please do not turn off the display or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files. Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system provided with the Windows op- CAUTION erating system. In case of a storage device Do not turn the display off or remove a USB formatted as a different utility program which storage device while EMF(my media) Menu is not supported by Windows, it may not be is activated, as this could result in loss of...

  • Page 24: Browsing Files

    ENTERTAINMENT Be sure to back up important files since data Browsing files stored in a USB memory device may be Access the photo, music, or movie lists and browse damaged. We will not be responsible for any files. data loss. Connect a USB storage device. If the USB HDD does not have an external power source, the USB device may not be Press MENU to access the main menus. detected. So be sure to connect the external Press the Navigation buttons to scroll to My power source. Media and press OK. - Please use a power adaptor for an external power source. We do not guarantee an USB Press the Navigation buttons to choose cable for an external power source. from Movie List, Photo List, Music List or Contents List and press OK. If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. If a USB memory device is connected to a USB multi-card reader, its volume data may Movie List Photo List Music List Contents List not be detected. If the USB memory device does not work properly, disconnect and reconnect it. Page 1/1 Photo List How fast a USB memory device is detected USB External Drive1 Page 1/1 differs from device to device.
  • Page 25 ENTERTAINMENT Supported file format Type Supported file format Music Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T Bit rate 32 to 320 RP,TP,ASF,WMV,FLV) y Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. y Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. kHz, 24 kHz avi(motion-jpeg)/*. y Sampling rate MPEG2.5 Layer3 : 8 kHz, mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting 11.025 kHz, 12 kHz file Content File Extensions : *.cts/ *.cse Video format : DivX 3.11, DivX4, DivX5. DivX6 (when Movie using Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*. SuperSign beta-1/beta-2, trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*. Manager) Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*. JPEG, Sorenson H.263 mkv(motion JPEG) Audio format : Dolby Digital, AAC, Mpeg, MP3, Video format: MPEG1, MPEG2, MPEG4,H.264/ LPCM, HE-AAC, ADPCM, WMA AVC, DivX 3.11, DivX4, DivX5. DivX6...

  • Page 26: Viewing Movies

    ENTERTAINMENT Viewing movies Play a movie. Play video files on display. Your display shows all NOTE of the video files saved in a USB storage device or shared folder on a PC. Non-supported files are displayed the preview image by icon only Abnormal files are displayed in the form of Press the Navigation buttons to scroll to My bitmap Media and press OK. Press the Navigation buttons to scroll to Movie List and press OK. Press the Navigation buttons to scroll to a Control playback by using the following buttons. folder you want and press OK. Press the Navigation buttons to scroll to a file you want and press OK. 01:02:30 / 02:30:25 Page 1/1 Movie List MENU Option Hide Exit Drive1 Page 1/1 USB1 USB Drive Button Description Stops the playback Move Play Page Change...
  • Page 27 ENTERTAINMENT Tips for using playing video files Video options Some user-created subtitles may not work Press MENU to access the Pop-Up menus. properly. Press the Navigation buttons to scroll to Set Some special characters are not supported Video Play., Set Video. or Set Audio. and in subtitles. press OK. HTML tags are not supported in subtitles. Subtitles in languages other than the sup- ported languages are not available. NOTE The screen may suffer temporary interrup- tions (image stoppage, faster playback, etc.) Option values changed in Movie List does when the audio language is changed. not affect Photo List and Music List. A damaged movie file may not be played Option value changed in Photo List and Mu- correctly, or some player functions may not sic List are changed likewise in Photo List be usable. and Music List excluding Movie List. Movie files produced with some encoders When replaying the video file after stopping, may not be played correctly. you can play from where it stopped previ- If the video and audio structure of recorded ously. file is not interleaved, either video or audio is outputted. Videos with resolutions higher than 1920X1080@25/30P may not work properly depending on the frame. Movie files other than the specified types and formats may not work properly. Max bitrate of playable movie file is 20 Mbps. (only, Motion JPEG : 10 Mbps) We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/...
  • Page 28 ENTERTAINMENT When you select the Set Video Play, Code Page Support Language Latin1 English, Spanish, French, Press the Navigation buttons to scroll to show German, Italian, Portuguese, the Picture Size, Audio Language, Subtitle Danish, Romanian, Norwegian, Language or Repeat. Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Press the Navigation buttons to scroll to make Latin2 Bosnian, Polish, Croatian, Czech, appropriate adjustments. Slovak, Slovenian, Serbian, Hungarian Latin4 Estonian, Latvian, Lithuanian Cyrillic Bulgarian, Macedonian, Russian, Ukrainian, Kazakh Menu Description Greek Greek Picture Size Selects your desired picture Turkish Turkish format during movie play. Korean Korean Audio Changes the Language Group of the Language audio during movie play. Files with a single audio track cannot be selected.

  • Page 29: Viewing Photos

    ENTERTAINMENT When you select the Set Video, Page 1/1 Photo List USB1 USB Drive Drive1 Page 1/1 Press the Navigation buttons to scroll to make appropriate adjustments. When you select the Set Audio, Move View Page Change Change Numbers Exit To Music List Mark Mode Press the Navigation buttons to scroll to show Page 1/1 the Sound Mode, Clear Voice II or Balance. Photo List Mark Mode USB1 USB Drive Drive1 Page 1/1 Press the Navigation buttons to scroll to make appropriate adjustments. Move Mark Page Change Exit View Marked Mark All Unmark All Exit Mark Mode Viewing photos View image files saved in a USB storage device. Menu Description The displays on the screen may differ from the model.
  • Page 30 ENTERTAINMENT Using photo options ENERGY Press the ENERGY SAVING button SAVING( repeatedly to change the brightness of Use the following options while viewing photos. your screen. Option y Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). y TransitionEffect: Set the view mode of the slideshow. y BGM: Selects a music folder for the background music. Press the Navigation buttons to scroll to select the Repeat or Random. Press the Navigation buttons to scroll to make appropriate adjustments. 2/13 NOTE Hide MENU Option Exit Slideshow You cannot change the music Options Number of selected photos folder while the background music is playing. You can only select the MP3 folder saved on the device that Option Description...
  • Page 31 ENTERTAINMENT When you select the Set Photo View, Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. Press the Navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide. Door Open Pushes the current slide like opening or closing the door as it plays to the next slide. /Close Shutter Pushes the current slide like drawing or pulling down the blind as it plays to the next slide Fade In Fades the slide out slowly before playing to the next slide.

  • Page 32: Listening To Music

    ENTERTAINMENT Listening to music When you select the Set Video, Press the Navigation buttons to scroll to make appropriate adjustments. Press the Navigation buttons to scroll to My Me- dia and press OK. Press the Navigation buttons to scroll to Music List and press OK. When you select the Set Audio, Press the Navigation buttons to scroll to a folder Press the Navigation buttons to scroll to show you want and press OK. the Sound Mode, Clear Voice II or Balance. Press the Navigation buttons to scroll to a file Press the Navigation buttons to scroll to make you want and press OK. appropriate adjustments. Page 1/1 Music List USB1 USB Drive Drive1 Page 1/1 001. - B01.mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3 00:00...
  • Page 33 ENTERTAINMENT Tips for playing music files Control playback by using the following buttons. This unit cannot support the ID3 Tag embedded MP3 files. Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 NOTE 004. - B04.mp3 005. - B05.mp3 006. - B06.mp3 007. - B07.mp3 008. - B08.mp3 00:00 00:00 00:00 00:00 00:00 005. - B05.mp3 02:30 / 03:25 Non-supported files are displayed the pre- MENU Option Hide Exit Play with Photo view image by icon only Abnormal files are displayed in the form of bitmap Button Description A damaged or corrupted music does not play Stops playing back the file and moves back to the music list. but displays 00:00 in playtime. Plays a music file A music downloaded from a paid service with Pauses or resumes playback copyright protection does not start but dis- plays inappropriate information in playtime.

  • Page 34: Viewing The Contents List

    ENTERTAINMENT Viewing the Contents List Music options Press MENU to access the Pop-Up menus. Plays back the stored files using the Export option in SuperSign Manager. Press the Navigation buttons to scroll to Set Au- dio Play or Set Audio and press OK. Press the Navigation buttons to scroll to My Media and press OK. Press the Navigation buttons to scroll to Con- NOTE tents List and press OK. Option values changed in Movie List does Press the Navigation buttons to scroll to a not affect Photo List and Music List. folder you want and press OK. Option value changed in Photo List and Mu- sic List are changed likewise in Photo List Press the Navigation buttons to scroll to a file and Music List excluding Movie List. you want and press OK. Page 1/1 When you select the Set Audio Play, Contents List USB1 USB Drive Drive1 Page 1/1 test1.cts test2.cts...

  • Page 35: Divx® Vod Guide

    ENTERTAINMENT DivX® VOD Guide DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 Press MENU to access the main menus. digit DivX registration code from your device at Press the Navigation buttons to scroll to www.divx.com/vod.

  • Page 36: Using Pip/Pbp

    ENTERTAINMENT Using PIP/PBP Select the PIP or PBP icon from the play list. Displays videos or photos stored on a USB device on a single monitor by dividing it into the main and sub screens. (See p.47) Press the MENU button to move to OPTION and press OK. Press PIP/PBP to select PIP or PBP and then 01:02:30 / 02:30:25 press OK. MENU Option Hide Exit < Movie List > PIP/PBP Pre. Move Mode Off Position PIP Size PBP Select Movie List or Photo List from My Media. (With PIP/PBP selected, the Music List and Contents List are deactivated.) 2/13 MENU Option Hide Exit Slideshow < Photo List > Movie List Photo List Music List Contents List Select either Main or Sub for sound. You must to select the output sound before running the...

  • Page 37: Customizing Settings

    CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing the main menus MARK BRIGHT NESS Press MENU to access the main menus. MUTE AUTO S.MENU MENU Press the Navigation buttons to scroll to one of the following menus and press OK. BACK EXIT TILE Press the Navigation buttons to scroll to the setting or option you want and press OK. When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.38) AUDIO (See p.41) Adjusts the image size, Adjusts the sound quality, quality, or effect. effect, or volume level. TIME (See p.42) Sets the time, date, or Timer feature. PICTURE AUDIO TIME MY MEDIA (See p.23) OPTION (See p.43) Display and play movie, Customizes the general photo and music content settings. OPTION NETWORK MY MEDIA stored on your USB.

  • Page 38: Picture Settings

    CUSTOMIZING SETTINGS PICTURE settings PICTURE Move Aspect Ratio : 16:9 Press MENU to access the main menus. Energy Saving : Off Press the Navigation buttons to scroll to PICTURE and Smart Energy Saving : Off Picture Mode : Standard press OK. Backlight Press the Navigation buttons to scroll to the setting or Contrast option you want and press OK. Brightness Sharpness - To return to the previous level, press BACK. Color When you are finished, press EXIT. Tint When you return to the previous menu, press Color Temp. BACK. Advanced Control Picture Reset Screen The available picture settings are described in the following: Setting Description Aspect Ratio Changes the image size to view images at its optimal size (See p.18). Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings. Level Disables Energy Saving function. Minimum/ Selects the brightness level of the backlight.
  • Page 39 CUSTOMIZING SETTINGS Setting Description SCREEN Customizes the PC display options in RGB mode. (In RGB Option Mode Only) Resolution Selects a proper resolution. See “Customizing PC display options”. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position/Size/ Adjusts the options when the picture is not clear, especially when characters are Phase shaky, after the auto configuration. Reset Restores the options to the default setting. Basic image options Setting Description Backlight A djusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Color Adjusts intensity of all colors. Tint Adjusts the balance between red and green levels.
  • Page 40 CUSTOMIZING SETTINGS Advanced Control Setting Description Dynamic Adjusts the contrast to keep it at the best level according to the brightness of the screen. The Contrast picture is improved by making bright parts brighter and dark parts darker. (This function can be used (Off/High/ only under Component.) Medium/Low) Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances (Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can be used only Component.) Clear White Make the white area of screen brighter and more white. (Off/High/Low) Skin Color It detects the skin area of video and adjusts it to express a natural skin color. (-5 to 5) Noise Reduces screen noise without compromising video quality. (This function can be used only under Reduction Component.) (Off/High/ Medium/Low) Digital Noise This option reduces the noise produced while creating digital video signals. Reduction (Off/High/ Medium/Low) Gamma Set your own gamma value. On the monitor, high gamma values display whitish images and low (High/Medium/ gamma values display high contrast images. Low) Black Level Low: The picture of the screen gets darker. (High/Low) High: The picture of the screen gets brighter.

  • Page 41: Audio Settings

    By differentiating the human sound range from others, it helps users make dialog more clear. Balance Adjusts balance between the left and right speakers according to your room environment. Sound Mode The best sound tone quality will be selected automatically depending on the video type that you're currently watching. Mode Standard The most commanding and natural audio. Music Select this option to enjoy the original sound when listening to the music. Cinema Select this option to enjoy sublime sound. Sport Select this option to watch sports broadcasting. Game To enjoy dynamic sound when playing a game. NOTE If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amplifier to cope with different user environments. Option Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. Bass Makes the output sound softer. When you turn up the bass, it will increase the output to the lower Frequency. Reset Resets the sound mode to the default setting. Digital Audio HDMI: Outputs the sound of digital signal from HDMI through the monitor speaker. Input Audio In: Outputs the sound through the monitor speaker by connecting HDMI to the Audio In port. Speaker ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.) OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.

  • Page 42: Time Settings

    CUSTOMIZING SETTINGS TIME settings TIME Move Clock Press MENU to access the main menus. Off Time : Off Press the Navigation buttons to scroll to TIME and press On Time : Off Sleep Timer : Off Power On Delay : Off Press the Navigation buttons to scroll to the setting or option Auto Off : 15 min. you want and press OK. Automatic Standby : Off - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following: Setting Description Clock Sets the time feature. On/Off Time Sets the time to turn on or off the Monitor set. Sleep Timer Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn it on again, the Sleep Timer will be set to off. Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. Auto off If Auto off is active and there is no input signal, the set switches to off mode automatically after 15 minutes. Automatic If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.

  • Page 43: Option Settings

    CUSTOMIZING SETTINGS OPTION settings OPTION Move Language Press MENU to access the main menus. Power Indicator Press the Navigation buttons to scroll to OPTION and press ISM Method : Normal DPM Select : On Fail Over : Off Press the Navigation buttons to scroll to the setting or option Factory Reset you want and press OK. Set ID Tile Mode - To return to the previous level, press BACK. PIP/PBP When you are finished, press EXIT. Key Lock : Off When you return to the previous menu, press BACK. Product/Service Info. Portrait Mode The available option settings are described in the following: Setting Description Language To choose the language in which the control names are displayed. Power Indicator Use this function to set the power indicator on the front side of the product to On or Off. ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time. Setting Normal Leave on normal if you don't foresee image burn in being a problem.
  • Page 44 CUSTOMIZING SETTINGS Setting Description Tile Mode Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : column x row ( c = 1 to 15 r = 1 to 15) - 15 x 15 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. Auto Config. Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position Moving the screen position horizontally and vertically. Size Adjust the horizontal and vertical size of the screen taking into account the size of the bezel. Natural The image is omitted by the distance between the screens to be naturally shown. Reset Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. Option Mode Sets the type of secondary screen. *OFF: Disables the secondary screen. *PIP (Picture In Picture): Displays the secondary screen in the main screen.
  • Page 45 CUSTOMIZING SETTINGS Setting Description Key Lock Key input does not work. This prevents invalid key input. Product/Service Displays the model name, software version, serial number, IP address, MAC address and home Info. page. Portrait mode Rotate OSD clockwise (90°,270°) Option Disables the Portrait mode. 90° Rotate OSD clockwise 90°. 270° Rotate OSD clockwise 270°. 90° 270°...
  • Page 46 CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. When using 9 monitors When using 2 monitors When using 4 monitors When the Tile Mode option is disabled ID 2 ID 3 ID 2 ID 2 ID 1 ID 1 ID 1 ID 6 ID 4 ID 5 ID 3 ID 4 Tile ID ID 9 ID 8 ID 7 When using 16 monitors When using 25 monitors ID 2 ID 3 ID 4 ID 5 ID 1 ID 1 ID 3 ID 4 ID 2 ID 8 ID 9 ID 10 ID 7 ID 6 ID 6 ID 5 ID 7...
  • Page 47 CUSTOMIZING SETTINGS PIP/PBP NOTE Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and The subscreen is only supported when using the sub screens. (See p.36) USB device. Mode *PIP(Picture In Picture): Displays the Sub screen Component in the main screen. Main *PBP(Picture By Picture): Displays the Sub HDMI/DVI-D screen next to the main screen. You can only change the size and position in PIP mode. Main screen With PBP selected, the Aspect Ratio option in the screen PICTURE menu is disabled (Fixed as 16:9). While running the PBP function, the Tile Mode function does not work. You must select the output sound before running the PIP or PBP functions. (Select either Main or Sub.) Position If you fail to select Main or Sub from the sound selection box, and if the OSD disappears after Adjusts the position of the subscreen (top left, either a period of time or when the Exit or Back bottom left, top right, bottom right) key is pressed, the PIP/PBP subscreen is not activated. You cannot change the sound while running the PIP or PBP functions. If you want to change the sound, please restart PIP/PBP. The picture quality of the subscreen is set according to the values selected in the main menu, top left top right...

  • Page 48: Picture Id

    CUSTOMIZING SETTINGS Picture ID AUDIO Picture ID is used to change the settings of a If you press the left/right buttons or press the (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT specific display using a single IR receiver for ON button repeatedly, the Picture ID cycles multi-vision. The set receiving the IR signal RS-232C IN RS-232C IN RS-232C IN through OFF and 1 to 4. Assign the ID you REMOTE communicates with another set via an RS232C CONTROL IN connection. Each set is identified by a Set ID. If want. you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID Picture ID can be controlled remotely. POWER POWER ◀ ▶ ENERGY INPUT ENERGY INPUT IR Receiver MONITOR MONITOR...

  • Page 49: Network Settings

    CUSTOMIZING SETTINGS NETWORK settings NETWORK Move Player Name Setting Press MENU to access the main menus. Network Setting : None Press the Navigation buttons to scroll to NETWORK and Network Status : Not connected Server IP Setting press OK. Server IP Status : Not connected Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description Player Name Sets the player name used in SuperSign Manager.(Up to 20 characters) Setting Network Setting Configure the network settings. Network Status Display the network status. - Internet is connected : Extermally connected - Network is connected : Only internally connected - Not connected : When there is no network connection Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed. Server IP Status Displays the connection status with the server. - Not connected : When there is no network connection with SuperSign server - Waiting for approval : When network connection with SuperSign server has been made, but access to server has not been approved by the server - Rejected : When network connection with SuperSign server has been made, but access to server has been rejected by the server - Internet is connected : When network connection with SuperSign server has been made and...

  • Page 50: Making Connections

    MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the Monitor set’s back panel. Find an external device you want to connect to your Monitor set shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details. HD Receiver HDMI - See p.51 AV - See p.52 HDMI - See p.51 DVI - See p.51 Component - See p.52 DVI - See p.51 AV - See p.52 AV - See p.52 Component - See p.52 Component - See p.52 Speaker Memory storage – See p.23 Camcorder/Camera Gaming device HDMI - See p.15 HDMI - See p.51 HDMI - See p.51 DVI - See p.15 DVI - See p.51 AV - See p.52 RGB - See p.14 AV - See p.52 Component - See p.52 LAN - See p.53 Component - See p.52 NOTE If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.

  • Page 51: Connecting To A Hd Receiver, Dvd, Camcorder, Camera, Gaming Device Or Vcr Player

    MAKING CONNECTIONS Connecting to a HD receiver, HDMI connection DVD, Camcorder, Camera, Transmits the digital video and audio signals from Gaming Device or VCR player an external device to the Monitor set. Connect the external device and the Monitor set with the HDMI Connect a HD receiver, DVD, or VCR player to the cable as shown on the following illustration. Monitor set and select an appropriate input mode. Back of the product. DVI connection Transmits the digital video signal from an external device to the Monitor set. Connect the external device and the Monitor set with the DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. Back of the product. (not included) HDMI (not (not included) included) NOTE Use a High Speed HDMI™ Cable. High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. DVI OUT AUDIO OUT...

  • Page 52: Component Connection

    MAKING CONNECTIONS Component connection AV(COMPOSITE,CVBS) connection Transmits the analog video and audio signals from an external device to the Monitor set. Connect Transmits the analog video and audio signals from the external device and the Monitor set with the an external device to the Monitor set. Connect RGB-Component cable as shown in the following the external device and the Monitor set with illustration. the Composite cable as shown in the following illustration. Back of the product. Back of the product. (not included) (not included) (not included) (not included) VIDEO AUDIO OUT VIDEO...

  • Page 53: Connecting To The Lan

    MAKING CONNECTIONS Connecting to the LAN Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or Using a router(Switch) a USB memory card reader to the Monitor set and access the USB menu to use various multimedia Switch files. Monitor Set Network Using the Internet. Network Monitor Set...

  • Page 54: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord y S ee if the power cord is properly connected to the outlet. connected? Is the power indicator light on? y See if the power switch is turned on. y May need service. P ower is on but the screen y Adjust brightness and contrast again. appears extremely dark. y Backlight may need repair. The power indicator is blinking? y I f the product is in power saving mode, move the mouse or press any key. y Turn both devices off and then back on. D oes the 'Invalid Format' y T he signal from the PC (video card) is out of the vertical or horizontal message appear? frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz...
  • Page 55 TROUBLESHOOTING The screen image looks abnormal. Problem Resolution Is the screen position wrong? y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. Do thin lines appear on the y D -Sub analog signal - Press the "AUTO" button in the remote control background screen? to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. Horizontal noise appears or the y D-Sub analog signal - Press the "AUTO" button in the remote control characters look blurred. to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. The screen is displayed y T he proper input signal is not connected to the signal port. Connect abnormally. the signal cable that matches with the source input signal. After-image appears on the product. Problem Resolution After-image appears when the y If you use a fixed image for a long time, the pixels may be damaged product is turned off.
  • Page 56 TROUBLESHOOTING The audio function does not work. Problem Resolution No sound? y See if the audio cable is connected properly. y Adjust the volume. y S ee if the sound is set properly. Sound is too dull. y Select the appropriate equalize sound. Sound is too low. y A djust the volume. Screen color is abnormal. Problem Resolution Screen has poor color resolution y S et the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. S creen color is unstable or y Check the connection status of the signal cable. Or, re-insert the PC mono-colored. video card. Do black spots appear on the y S everal pixels (red, green, white or black color) may appear on the screen? screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD.

  • Page 57: Specifications

    SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type 801.31 mm Wide (32 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 801.31 mm Pixel Pitch 0.36375 mm (H) x 0.36375 mm (V) Video Signal Max. Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/DVI : 30kHz to 83 kHz Vertical Frequency RGB : 56 Hz to 60 Hz HDMI/DVI : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite(AV) Sync, Digital, SOG Input Connector 15-pin D-Sub type (RGB), HDMI/DVI(digital), Component, Composite(AV), RS-232C, LAN, USB Power Rated Voltage AC 100-240 V~, 50 / 60 Hz 0.8 A Power Consumption On Mode : 65 W Typ. Smart Energy Saving Mode : 40 W Typ. Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity...
  • Page 58 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 740.4 mm x 442 mm x 35.6 mm/ 7.9 kg 740.4 mm x 498 mm x 301.9 mm/ 8.7 kg 740.4 mm x 442 mm x 84.2 mm/ 8.7 kg 740.4 mm x 498 mm x 301.9 mm/ 9.5 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 59 SPECIFICATIONS DTV Mode RGB (PC) supported mode HDMI/DVI Horizontal Vertical Resolution Component Resolution (DTV) Frequency(kHz) Frequency(Hz) 480i 31.469 59.94 640 x 480 576i 37.879 60.317 8 00 x 600 480p 48.363 1024 x 768 576p 44.772 59.855 1280 x 720 720p 47.7 1366 x 768 1080i 63.981 60.02 1280 x 1024 1080p 65.290 59.954 1680 x 1050 67.5 1920 x 1080 Power Indicator Mode...

  • Page 60: Ir Codes

    IR CODES IR CODES All models do not support the HDMI/USB function. Code (Hexa) Function Note Energy Saving ( R/C BUTTON R/C BUTTON (ON/OFF) POWER INPUT R/C BUTTON Monitor On R/C BUTTON Monitor Off R/C BUTTON MENU R/C BUTTON Up ( ) R/C BUTTON Down ( ) R/C BUTTON Left ( ) R/C BUTTON Right ( ) R/C BUTTON OK( ) R/C BUTTON R/C BUTTON BACK( EXIT R/C BUTTON R/C BUTTON R/C BUTTON Volume R/C BUTTON Volume MUTE...

  • Page 61: Controlling The Multiple

    CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Command reference list COMMAND DATA (Hexadecimal) 01. Power 00H to 01H 02. Input Select Refer to ‘02. Input Select’ 03. Aspect Ratio Refer to ‘03. Aspect Ratio’ 04. Energy Saving Refer to ‘04. Energy Saving’ 05. Picture mode 00H to 04H 06. Contrast 00H to 64H 07. Brightness 00H to 64H 08. Sharpness 00H to 64H 09. Color 00H to 64H 10. Tint 00H to 64H 11. Color Temperature 00H to 64H 12. H Position 00H to 64H 13. V Position 00H to 64H 14. H Size 00H to 64H 15. Auto configuration 16. Balance 00H to 64H 17. Sound mode 01H to 05H 18. Treble 00H to 64H 19. Bass 00H to 64H...
  • Page 62 CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA (Hexadecimal) 37. Fail Over Input Select Refer to ‘37. Fail Over Input Select’ 38. Reset 00H to 03H 39. Tile Mode 00H to FFH 40. Tile Mode Check 41. Tile ID Refer to ‘41. Tile ID’ 42. Tile H Position 00H to 32H 43. Tile V Position 00H to 32H 44. Tile H Size 00H to 32H 45. Tile V Size 00H to 32H 46. Natural Mode (In Tile mode) 00H to 01H 47. DPM Select 00H to 01H 48. Temperature Value 49. Remote Lock/ key Lock 00H to 01H 50. Key Refer to ‘52. Key’ 51. OSD Select 00H to 01H 52. Elapsed time return 53. Serial No. Check 54. S/W Version 55. White Balance Red Gain 00H to FEH 56. White Balance Green Gain 00H to FEH 57. White Balance Blue Gain 00H to FEH 58. Backlight 00H to 64H...

  • Page 63: Transmission / Receiving Protocol

    CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] or [Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: S et ID with which you want to communicate. Etner [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. * [Data]: Information passed to the set. * [Data1]: Information passed to the set. * [Data2]: Information passed to the set. * [Data3]: Information passed to the set. * [Cr]: Carriage Return. ASCII code ‘0x0D’. * [ ]: ASCII code space ‘0x20’ Acknowledgement [Command2][ ][Set ID][ ][OK/NG][Data][x] or [Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] * I n a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note : In this mode, display will send the acknowledgement after power on processing completion. There might be a time delay between command and acknowledgement. * No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).
  • Page 64 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) 04. Energy Saving (Command: j q) To control power On/Off the display. To control the energy saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 00: Off 01 : Power On 01: Minimum FF : Check status 02: Medium 03. Maximum Acknowledgement 04: Auto [a][ ][Set ID][ ][OK/NG][Data][x] 05. Screen Off * I n a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data Acknowledgement feedback presents status about each function. [q][ ][Set ID][ ][OK/NG][Data][x] * N ote: In this modes, display will send the acknowledgement after power on processing completion. There might be a time delay between command and acknowledgement. * T here might be some time delays between command and acknowledgement. 02. Input Select (Command: x b) 05. Picture Mode (Command: d x) To select input source for display.
  • Page 65 CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) 10. Tint (Command: k j) (Video input only) To adjust screen brightness. To adjust screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Data 00 to 64: Tint 0 to 100(R50 to G50) Acknowledgement Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) (Video input only) 11. Color Temperature (Command: x u) To adjust screen sharpness. To adjust color temperature. Transmission Transmission [k][k][ ][Set ID][ ][Data][Cr] [x][u][ ][Set ID][ ][Data][Cr] Data 00 to 64: Sharpness 0 to 100 Data 00 to 64: Warm 50 to Cool 50 Acknowledgement Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] [u][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i) (Video input only) 12. H Position (Command: f q) To adjust screen color. To set the Horizontal position. * This function is available only when the Tile Mode is Transmission set to Off. [k][i][ ][Set ID][ ][Data][Cr] * The operational range varies depending on the Data 00 to 64: Color 0 to 100...
  • Page 66 CONTROLLING THE MULTIPLE PRODUCT 13. V Position (Command: f r) 16. Balance (Command: k t) To set the Vertical position. To adjust balance. * This function is available only when the Tile Mode is Transmission set to Off. [k][t][ ][Set ID][ ][Data][Cr] * The operational range varies depending on the Data 00 to 64: Left 50 to Right 50 RGB input resolution. * Only available for RGB input. Acknowledgement Transmission [t][ ][Set ID][ ][OK/NG][Data][x] [f][r][ ][Set ID][ ][Data][Cr] "0 - 64: min. -50 (bottom) to max. 50 (top) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 17. Sound Mode (Command: d y) 14. H Size (Command: f s) To select the sound mode. To set the Horizontal size. Transmission * This function is available only when the Tile Mode is [d][y][ ][Set ID][ ][Data][x] set to Off. * The operational range varies depending on the Data 01: Standard RGB input resolution. 02: Music * Only available for RGB input. 03: Cinema 04: Sport Transmission 05. Game [f][s][ ][Set ID][ ][Data][Cr] Data 00 to 64: Size -50 to 50 Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 67 CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) 22. Volume Control (Command: k f) To adjust bass. To adjust volume. Transmission Transmission [k][s][ ][Set ID][ ][Data][Cr] [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Bass 0 to 100 Data 00 to 64: Volume 0 to 100 Acknowledgement Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] [s][ ][Set ID][ ][OK/NG][Data][x] 23. Time 1(Year/ Month/ Day) (Command: f a) 20. Speaker (Command: d v) To set the Time 1(Year/ Month/ Day) values. To select speaker on/off. Transmission Transmission [f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [d][v][ ][Set ID][ ][Data][x] Data 1 00 to 14: 2010 to 2030 Data 00: Speaker Off Data 2 01 to 0C: January to December 01: Speaker On Data 3 01 to 1F: 1 to 31 * Enter “fa [Set ID] ff” for checking Time 1(Year/ Acknowledgement Month/ Day) values. [v][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 21. Volume Mute (Command: k e) 24. Time 2(Hour/ Minute/ Second) (Command: f x) To select screen mute on/off. To set the Time 2(Hour/ Minute/ Second) values. Transmission Transmission [k][e][ ][Set ID][ ][Data][Cr]...
  • Page 68 CONTROLLING THE MULTIPLE PRODUCT 25. Off Timer(Repeat Mode/ Time) (Command: f e) 27. On Timer Input (Command: f u) To set the Off Timer(Repeat mode/ Time) function. To set the On Timer Input function. Transmission Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f][u][ ][Set ID][ ][Data][Cr] Data1 00: Repeat Off Data 20: AV 01: Repeat Once 40: Component 02. Repeat Daily 60. RGB 03: Repeat from Monday to Friday 90: HDMI 04: Repeat from Monday to Saturday 70: DVI 05: Repeat from Saturday to Sunday * Check if Time 1(Year/ Month/ Day) and Time 06. Repeat on Sunday 2(Hour/ Minute/ Second) and On Timer(Repeat Data2 00 to 17: 00 to 23 Hours Mode/Time) functions have been set before setting Data3 00 to 3B: 00 to 59 Minutes this function. * Enter “fe [Set ID] ff” for checking Off Timer(Repeat mode/ Time) values. Acknowledgement * Check if Time 1(Year/ Month/ Day) and Time [u][ ][Set ID][ ][OK/NG][Data][x] 2(Hour/ Minute/ Second) have been set before setting this function. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 28. Sleep Time (Command: f f) To set sleep time. Transmission [f][f][ ][Set ID][ ][Data][Cr] Data 00: Off 01: 10 min.
  • Page 69 CONTROLLING THE MULTIPLE PRODUCT 30. Automatic Standby (Command: m n) 33. Power Indicator(Standby Light) (Command: f o) To set the Automatic Standby function. To set the Power Indicator(Standby Light) function. Transmission Transmission [m][n][ ][Set ID][ ][Data][Cr] [f][o][ ][Set ID][ ][Data][Cr] Data 00: Automatic Standby Off Data 00: Standby Light Off 01: Automatic Standby On(4hours) 01: Standby Light On Acknowledgement Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] [o][ ][Set ID][ ][OK/NG][Data][x] 31. Auto Off (Command: f g) To set the Auto Off function. Transmission [f][g][ ][Set ID][ ][Data][Cr] 34. Power Indicator(Power Light) (Command: f p) Data 00: Auto Off Off To set the Power Indicator(Power Light) function. 01: Auto Off On(15 min.) Transmission [f][p][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00: Power Light Off [g][ ][Set ID][ ][OK/NG][Data][x] 01: Power Light On Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 32. Language (Command: f i) To set language for OSD. Transmission [f][i][ ][Set ID][ ][Data][Cr] Data 00: Czech 01: Danish...
  • Page 70 CONTROLLING THE MULTIPLE PRODUCT 36. Fail Over Select (Command: m i) 38. Reset (Command: f k) To set the Fail Over function. To execute the Picture, Screen, Audio and Factory reset function. Transmission Transmission [m][i][ ][Set ID][ ][Data][Cr] [f][k][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Auto Data 00: Picture Reset 02: Manual 01: S creen Reset (Only available for RGB input.) Acknowledgement 02: Factory Reset [i][ ][Set ID][ ][OK/NG][Data][x] 03: Audio Reset Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 39. Tile Mode (Command: d d) 37. Fail Over Input Select (Command: m j) To select a Tile Mode Off/ On and Tile Row/ Column To select fail over mode. size. *Only available in Fail Over manual mode. Transmission Transmission [d][d][ ][Set ID][ ][Data][Cr] [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 00 to FF: 1st byte - Tile Column value [ ][Data4][Cr] 2 nd byte - Tile Row value Data 1 to 4(Priority 1 to 4) *00, 01, 10, 11 means Tile Mode Off.
  • Page 71 CONTROLLING THE MULTIPLE PRODUCT 41. Tile ID (Command: d i) 44. Tile H Size (Command: d g) To set Tile ID. To set the Tile Horizontal Size. *Set Tile H Position to 0x32 (50) before setting Tile H Transmission Size. [d][i][ ][Set ID][ ][Data][x] * This function is available only when the Natural Data 01 to E1: Tile ID 01 to 225** option of the Tile Mode is set to Off while the Tile FF: Read Tile ID Mode set to On. ** Data could not be set over (Tile Row) x (Tile Transmission Column) [d][g][ ][Set ID][ ][Data][x] Acknowledgement Data 00 to 32: 0 to 50 [i][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement *NG will be return if data is over (Tile Row) x (Tile [g][ ][Set ID][ ][OK/NG][Data][x] Column), except 0xFF. 42. Tile H Position (Command: d e) 45. Tile V Size (Command: d h) To set the Tile Horizontal position. To set the Tile Vertical size. * This function is available only when the Natural *Set Tile V Position to 0x00 before setting Tile V option of the Tile Mode is set to Off while the Tile Size. Mode set to On. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Transmission Mode set to On.
  • Page 72 CONTROLLING THE MULTIPLE PRODUCT 47. DPM Select (Command: f j) 50. Key (Command: m c) To set the DPM (Display Power Management) To send IR remote control code. function. Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [f][j][ ][Set ID][ ][Data][x] Data IR_KEY_CODE Data 00: DPM Select Off 01: DPM Select On Acknowledgement [c][ ][Set ID][ ][OK][Data][x] Acknowledgement When display is in the standby mode, display will turn [j][ ][Set ID][ ][OK/NG][Data][x] on by Power button of remote control only. 48. Temperature Value (Command: d n) 51. OSD Select (Command: k l) To read the inside temperature of the display. To select OSD(On Screen Display) on/off Transmission Transmission [d][n][ ][Set ID][ ][Data][Cr] [k][l][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Data 00: OSD Off 01: OSD On Acknowledgement Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] [l][ ][Set ID][ ][OK/NG][Data][x] 49. Remote Controller Lock/ Key Lock 52. Elapsed time return (Command: d l) (Command: k m) To read the panel used time.
  • Page 73 CONTROLLING THE MULTIPLE PRODUCT 53. Serial No.Check (Command: f y) 56. White Balance Green Gain (Command: j n) To read the serial numbers. To adjust white balance green gain. Transmission Transmission [f][y][ ][Set ID][ ][Data][Cr] [j][n][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Data 00 to FE: Green gain 0 to 254 Acknowledgement Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] [n][ ][Set ID][ ][OK/NG][Data][x] 54. S/W Version (Command: f z) 57. White Balance Blue Gain (Command: j o) To read the software version. To adjust white balance blue gain. Transmission Transmission [f][z][ ][Set ID][ ][Data][Cr] [j][o][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Data 00 to FE: Blue gain 0 to 254 Acknowledgement Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] [o][ ][Set ID][ ][OK/NG][Data][x] 55. White Balance Red Gain (Command: j m) 58. Backlight (Command: m g) To adjust white balance red gain. To adjust screen backlight. Transmission Transmission [j][m][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr] Data 00 to FE: Red gain 0 to 254 Data 00 to 64: Backlight 0 to 100 Acknowledgement...
  • Page 74 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.

Table of Contents