Page 1
OWNER'S MANUAL LCD TV MODELS 42LBX 47LBX 52LBX Please read this manual carefully before operating your set° Retain it for future reference° Record mode[ number and serial number of the set. See the [abe[ attached on the back cover and quote this information to your...
820-40 of the National Do not attempt to modify this product in any way Electric Code (U.S.A.). The code provides guidelines without written authorization from LG Electronics. proper grounding and, in particular, specifies that the Unauthorized modification could void the user's...
SAFETY INSTRUCTIONS IMPORTANT SAFETYINSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.
Page 4
Use only with the cart, stand, tripod, bracket, of the appliance, and have the cord replaced or table specified by the manufacturer, or sold with an exact replacement part by an authorized with the apparatus. When a cart is used, use servicer.
CONTENTS WARNING / CAUTION ......SAFETY INSTRUCTIONS ......Entry Modes ........... Photo List ............OF THIS TV ....... FEATURE Music List ............Accessories ............Picture Size (Aspect Ratio) Control ....46 Front Panel Information ........Preset Picture Settings Back Panel Information ........
Page 6
Clock Setting - Auto Clock Setup ........- Manual Clock Setup ......... Auto On/Off Timer Setting ......71 Sleep Time Setting .......... Auto Shut-off Setting ........Set Password & Lock System ......74 Channel Blocking ..........Movie & TV Rating .......... External Input Blocking ........
Fuji HD ]O80p signal of roughly a mi!Jion or more pixe[s, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital LG TV with this logo can play MP3 music from a television, HDTV formats include 1080i and 720p MP3 player, such as iPOD, and ]PEG images from a resolutions.
PREPARATION ACCESSORIES Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance...
PREPARATION FRONT PANELINFORMATION ,,,IHere shown may be somewhat different from your TV. ""_ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).
PREPARATION ATTACHING THE TV TO A WALL ,,,_ Here shown may be somewhat different from your TV. This feature is not available for all models. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward...
EXTERNAL EQUIPMENT SETUP HD RECEIVERSETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
Page 16
When connecting HDMi cable 1. How to connect Connect the digital set-top box to HDM[/DVl IN], 2 or 3 jack on the set. No separated audio connection is necessary. 2. How to use Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select HDMil, HDM[2...
Page 17
EXTERNALEQUIPMENT SETUP When connecting HDMi to DVi cable > 1. How to connect Connect the DVl output of the digital set-top box to the HDMJ/DVI IN1,2 or 3 jack on the set. Connect the audio output of the digital set-top box to the AUDIO (RGB/DVI) jack on the set.
DVD SETUP When connecting Component cable 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the "10 COMPONENT...
Page 19
EXTERNALEQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 2.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TVo If the 4:3; picture format is used; the fixed images on the sides of the screen may remain visible on the screen° When connecting with an antenna r"rl Antenna...
Page 21
EXTERNALEQUIPMENT SETUP When connecting with a RCA cable 1. How to connect Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow Audio Left = white, and Audio Right = red) 2. How to use £) Insert a video tape...
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings° When connecting D-sub 15 pin cable ]. How to connect > Connect the RGB output of the PC to the RGB (PC) jack on the set.
Page 23
EXTERNALEQUIPMENT SETUP When connecting HDM! to DVI cable AUDIO > 1. How to connect Connect the DVR output of the PC to the HDMI/DVI IN1,2 or 3 jack on the set. (Use the HDM[ to DV[ cable) Connect the PC audio output to the AUDIO (RGB/DVJ) jack on the set.
Page 25
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Overview When the RGB input of the set is connected to a PC Output_ Select RGB-PC with using the INPUT button on the remote control. When you change the resoJution_ select the proper resolution in present input to see the best picture appearance.
Page 26
Adiustment for screen Resolution, Position, Size, Phase, Reset Use A or Y button to select Resolution, Position, Size, or Phase. > Press the ENTER button and then use A Y @ _" button to make appropriate adjustments. mThe Phase adjustment range is -16 _ +I 6.
EXTERNALEQUIPMENT SETUP OTHER A/V SOURCESETUP 1. How to connect Connect AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 3> 2. How to use Select AV2 input source with using the INPUT button on the remote control.
AUDIO OUT SETUP Send the TV's audio to external audio equipment via the Audio Output port. 1. How to connect Analog Connect audio outputs to the TV's AUDIO OUT jacks. 3> Set the "TV Speaker option - Off" in the AUDRO menu. (_,, p.62).
WATCHING TV/CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MEDIAHOST mode control _sControls MEDIAHos_ mode. buttons VCR/DVD _ Control video cassette recorders or DVD players. buttons 3> ¢h Displays the main menu.
Page 30
POWER Turns your TV or any other programmed equipment on or off, depending on the mode. in AV ] -2, Component ] -2, RGB-PC,HDMI], HDMI2 and HDMI3 input sources, screen returns to TV INPUT the last TV channel INPUT External input modes rotate in regular sequence: Antenna, Cable, AVl -2, Component 1-2, RGB-PC, HDMI1, HDMI2,...
WATCHING TV/CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches standby mode. In standby mode, press the (_)/I (or POWER), INPUT, CH (A or T) but- ton on the TV or press the POWER INPUT, TV INPUT, CH(A...
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual° Press the MENU button and then use A or Y button to select each menu° Press the _ button and then use A Y @ _ button to display the available menus°...
WATCHING TV/CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned >...
i ii Add/Delete Channel (Manual Tuning) A password is required to gain access to Manual Tuning menu if the Lock System is turned If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received°...
WATCHING TV/CHANNEL CONTROL Channel Editing From the default channel list created from the Auto Tuning channel search, you can create two different types of chan- nel lists in memory: "custom list" and "favorite channel list". A custom [+st can be created by togging each channel or offwith...
INPUT LIST Press theINPUT button to display external device that is con- nected to the unit, on screen. Press the ENTER button to change the input to the active external device. Use the A or Y button to select the input source.
WATCHING /CHANNEL CONTROL S,JlTI PL|FIK This operates only for the devices with the @mpL,nK logo. Please check the @mpL,nK logo. This allows you to control and play other AV devices connected to the display through HDMI cable without addi- tional cables and settings. SimpLink Preparations 3>...
Page 38
SimpLink Functions Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AM device Enables you to select one of AV devices connected to TV and play it. _,u _° Disc playback Control...
WATCHINGTV/CHANNEL CONTROL INPUT LABEL Sets a label to each input source which is not in use when you press INPUT button, Press the MENU button and then use A or Y button select the OPTION menu. Press the _ button and then use A or Y button select...
HOST ENTRY MODES [Media Host Menu] When you connect a USB device or press the button, this screen is displayed, automatically° in USB device, you can not add a new folder or delete the existing folder. Press the A or Y button to select the desired item.
PHOTOLIST It's available to playback the photo file (*ojpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Screen Components @ Usable USB memory -r" @ Current page/Total pages...
Page 42
Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page° CH (A or T) Use the button to navigate in the thumbnail photo page, Use the MARK button to mark or unmark a photo, When one or more photos are marked, you can view individual photos...
Page 43
Set up the menu in Full-Sized Screen "You can change the settings to display photos stored on a USB device, on a fu[hsized screen. Detailed operations are available on full-sized photo view screen, Use the CH (A or T) button to navigate the thumbnail photo page.
Page 44
Option : Set values for Slide Speed and Music fold- er, Use _l or _button to select Option and press ENTER button, Use @ or _ button and ENTER button to set val- ® ues, Then go to _ and press ENTER to save the settings, You cannot change Music...
MUSIC LIST Purchased music files (*oMP3) may contain copyright restrictions° Playback of these files may not be supported by this model° Music file on your USB device can be played by this unit. The On Screen Display may be different from your set.
Page 46
Music Selection and PopUp Menu As shown, up to 8 music titles are listed per page° se the CH (A or T) button to navigate in the music titles page. Use MARK button to mark or unmark a music. When one or more music files are marked, the marked musics wi[[ be played in sequence.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3; aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed°...
PRESETPICTURE SETTINGS Picture Mode -Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. Intelligent Eye, Dynamiq Standard, Mild Settings are preset for optimum picture quality at the factory and are not adjustable.
PICTURE CONTROL Color Tone -Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), Color...
MANUAL PICTURE ADJUSTMENT Picture Mode -User Mode Adjust the picture appearance to suit your preference viewing situations. Press the MENU button and then use _ or Y button to select the PICTURE menu. "O Press the _ button and then use A or Y button select Picture Mode.
PICTURE CONTROL Color Tone -User Mode You can also adjust the detailed settings(Red, Green, Blue) by selecting the User menu° This feature operate only if the picture mode set User 1 or User 2. Press the MENU button and then use A or Y button to select the PICTURE menu.
XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronics unique picture improving technology display a real HD source through an digital signal process- ing algorithm. When selecting Picture Mode options (Dynamic, Standard and Mild), XD is automatically change to Auto.
PICTURE CONTROL ADVANCED -CINEMA 3:2 PULLDOWN MODE Set up the TV for the best picture appearance for viewing movies. This feature is disable only in RGB-PC, HDMI1, HDMI2, HDMI3 or Component1,2(except 480i) mode. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust...
ADVANCED-BLACK (DARKNESS) LEVEL Adjusting contrast and the brightness of the screen using the black level of the screen. This feature operates only in HDMI1, HDMI2, HDMI3, AVl, or AV2 mode. Press the MENU button and then use A or Y button to select the PICTURE menu.
PICTURE CONTROL ADVANCED - TruM Set up the TV for best picture with film judder cancellation that provides stunningly steady movements. This feature is disable in RGB-PC, HDMI-PC mode. And when HDMI is set to the PC in Input Label, TruM also disable.
TruM DEMO Use it to see the difference between TruM Demo on and TruM Demo off. Press the MENU button and then use A or Y button to select the PICTURE menu. "0 Press the _ button and then use A or Y button to select TruM Demo.
PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their original factory preset values. Press the MENU button and then use _ or Y button to select the PICTURE menu. "O Press the _ button and then use A or Y button to select Picture Reset...
SO ND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV pro- gram.
SOUND & LANGUAGE CONTROL PRESETSOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjust- ment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, Sports and User are preset for good sound quality...
SOUND SETTING ADJUSTMENT- USER MODE Adjust the sound to suit your taste and room situations. Press the MENU button and then use A or Y button to select the AUDIO menu. Press the _ button and then use _ or Y button to select Sound Mode.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Press the MENU button and then use A or Y button to select the AUDIO menu. Press the _ button and then use A or Y button select Balance.
STEREO/SAP BROADCAST SETUP This receive stereo programs (Secondary Audio Program) that accompanies the stereo pro- gram if the station transmits an additional sound signal as well as original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received...
SOUND & LANGUAGE CONTROL TV SPEAKERSON/OFF SETUP Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. Press the MENU button and then use A or Y button to select the AUDIO menu.
AUDIO LANGUAGE Other languages may be available if a digital signal is pro- vided by the broadcasting station. This feature operate only in DTV/CADTV mode. Press the MENU button and then use A or Y button to select the OPTION menu.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected lan- guage. First select your language. Press the MENU button and then use A or Y button to select the OPTION menu.
SOUND & LANGUAGE CONTROL Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays informa- tion at any position on the screen and is usually the pro- gram's dialog. Caption/Text, if provided by the broadcaster,...
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. This function in only available when Caption Mode is set Press the MENU button and then use A or Y button to select the OPTION menu.
SOUND & LANGUAGE:CONTROL Caption Option Customize DTV/CADTV captions that appear on your screen. This function is only available when Caption Mode is set ress the MENU button and then use A or Y button to select the OPTION menu. Press the II_ button and then use _ or Y button...
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the cur- rent time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. Press the MENU button and then use A or Y button to select the TIME menu. Press the _ button and then use A or Y button to select Clock Press the _ button and then use A or Y button to select Manual.
AUTO ON/OFF TIME SETTING The timer function operates only if the current time been set. The Off-Time function overrides On-Time function they are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours after the TV...
TIME SETTING SLEEPTIME SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. You can also set up the Sleep Time in the TIME menu. Press the TIMER button repeatedly to select the number of minutes.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal inTV & input source or no remote control input for 10 minutes. Press the MENU button and then use A or Y button to select the TIME menu. Press the II_ button and then use A or Y button select Auto...
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories.
Page 76
Set Password For USA For Canada Change the password by inputting a new password twice. After inputting the password, use the _ or Y button to choose Set password. ress the _ button and then choose any 4 digits for your new password and enter the them on the new.
PARENTALCONTROL/RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. For USA For Canada After inputting the password, use the A or Y button to choose Block Channel. Press the _ button.
MOVIE & TV RATING Movie Rating (MPAA) -for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level.
Page 79
PARENTALCONTROL/RATINGS TV Rating Children - for USA only Prevents children from watching certain children's programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those...
Page 80
TV Rating english - for CANADA only Selecting canadian english language rating system. After inputting the password, use the A or Y button to choose TV Rating-English. Press the _ button and then use the A or Y button to select E, C, C8+, G, PG, 1 4+, 1 8+, or Blocking Off. E(Exempt) C(Children) C8+(Children...
PARENTALCONTROL/RATINGS EXTERNAL INPUT BLOCKING For USA For Canada Enables you to select a source to block from the external source devices you have hooked After inputting the password, use the A or Y button to choose Input Block Press the _ button and then use the _ or Y to select a source.
APPENDIX TROUBLESHOOTING I,I,I Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. i,i,i Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Page 83
Press the VOL or VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the...
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here's a great way to keep the dust offyour screen for a while.
PRODUCT SPECIFICATIONS 01_ T he specifications shown above may be changed without prior notice for quality improvement. 40.6 x 30.7 x 13.8 inches 45.3 x 33.8 x 15.0 inches 50.7 x 3Z4 x 16.6 inches 1030.0 x 781.0 x 350.0 mm 1150.0 x 859.0 x 381.0 mm 1289.0 x 950.0 x 421.0 mm 40.6 x 2Z3 x 3.5 inches 45.3 x 30.2 x 4.1 inches...
PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device...
Page 87
Remote control code VCRs ANAM SANSUI iil ii iii !:_il !!!i!!iiiiiiiiiii! ! : i i!!if! CAPEHART 003 040 135 101 102 134 13 003 008 009 010 CURTISMATHES ii!_!_!,L!i_!_!_!_i_ii!i _I _i7!i5_!_i_{_i_i_!!_ii_ii_ii_i_!_{_!:!!_!_i_i{_i!!i!{_i_;_!_!_ii_i_{i_i_i_ _!_i_i!!_i!_!_ii_!_i_!_!_i_i!i!i_{ii_!_i_i_i_i_ii_ii_ii_ii_ii_ii_ii_!!_!_ _i_ii!iii{ili_i{_i_i_i! MINOLTA 065 1o8110111 013020045 DAYTRON SONY MDLT DYNATECH 012 o23 043 o77 o 78...
IR CODES 1. How to Connect 01_ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes 0_ Output waveform Single pulse, modulated with 3Z917KHz signal at 455KHz Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 0_ Configuration of frame...
Page 91
RGB-PC Discrete IR Code (RGB-PC Input Selection) Button HDMI1 Discrete IR Code - (Dash) Remote Control BACK Remote Control Button (HDMIi input selection) Button HDMI2 Discrete IR Code MUTE Remote Control Remote Control Button (HDMI2 Input Selection) VOL Y Remote Control Button Ratio 4:5 Discrete IR Code...
EXTERNAL CONTROL THROUGH RS-232C Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product's functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel.
Page 93
RS-232C Configurations D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping 1 '. _ p.95 Press the MENU button and then use A or Y button to select the OPTION menu.
Page 96
Power (Command2:a) Screen Mute (Command2:d) To control Power On/Off of the TV. To select screen mute on/off. TranSmissiOn [k] [a] [ ][Set ID][ ][Data] [Cr] Transmission[k] [d] [] [Set ID] [] [Data] [Cr] Data 0 : Power Off Data 1 : Power On Data 0 : Screen mute off (Picture on) ACknOWledgement [a][] [set ID][]...
Page 97
*Real data mapping 1 1 4. Remote Control Lock Mode (Command2:m) 0 : Step 0 To lock the remote control and the front panel controls on the set. TransmissiOn[k] [m][] [set !D][] [Data] [Cr] A : Step 10 (SET ID 10) Data 0: Lock off Data 1 : Lock on Acknowledgement[m][]...
Page 98
19. Red adjustment(Command:v) 22. Tune Command (Command: m a) To adjust red in color temperature To tune channel to following physical/major/minor ber. TransmissiOn [k] [v] [ ][set ID] [] [Data] [Cr] TransmlSsiOn [m] [a][] [set !D] [ ] [Data0] [ ] [Data]] Data Min:0 - Max:C8 [ ] [Data2] [] [Data5][ ] [Data4]...
Page 99
Data 5: All data are transmitted by Hexadecimal code 23. Channel Add/Del (Command: m b) Two/One part Channel: 6th bit To add and delete the channels This bit is used in a cable-ready system. TranSmissiOn[m] [b] [ ] [set ID] [] [Data] [Cr] Using physical channel: 5th bit Data 0: Channel Delete Data 1 : Channel Add...