Contents Introduction About your headset About Bluetooth connectivity Get started Keys and parts Charge the battery Switch the headset on or off Pair and connect the headset to your phone Switch the voice guidance off Wear the headset Make calls Make and receive calls Change the volume Pair and connect the headset to two...
Introduction About your headset With the Nokia Bluetooth Headset BH-118, you can make and receive calls while on the move. Read this user guide carefully before using the product. Also, read the user guide for the device that you connect to the product.
Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard.
Connect the charger cable to the charger connector on the headset. The red indicator light turns green when the battery is fully charged. Charging the battery fully may take up to 2 hours. Disconnect the charger from the headset, then unplug from the wall outlet. The fully charged battery has power for up to 6 hours of talk time or up to 120 hours of standby time.
The headset switches to pairing mode, and a green indicator light starts to flash quickly. Within 3 minutes, switch Bluetooth on in your phone, then set it to search for Bluetooth devices. For details, see the user guide of your phone. Select the headset from the list of found devices.
To have the earpiece within easy reach when not using the headset, keep the earpiece in the holder. Make calls Make and receive calls To make and receive calls using your headset, you need to connect it to your phone. Make a call Make a call in the normal way.
Redial the last called number Press twice. Use voice dialling Press and hold for 2 seconds, then follow the instructions in the user guide of your phone. Change the volume Set the desired volume level on your connected phone. The selected volume level is saved as the minimum volume level for the phone that is currently connected to the headset.
Settings Clear device pairings To switch the headset off, press and hold for 5 seconds. Press and hold for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. After the pairings are cleared, the headset enters pairing mode. Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery.
Page 10
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Nokia is under license.