Table of Contents
Advertisement
PROGRAMMING THE REMOTE CONTROL
The provided
universal remote control
can be programmed
to operate most remote-controllable
devices.
Note that the remote may not control
all models of other brands.
Programming
a code into a remote mode
O
To find out whether your remote control
can operate each device without
programming,
turn on the device
(such as a VCR) and press the corresponding
mode button
on the remote.
After that, press the POWER button.
If the device is turned off and it responds properly the remote control
need not be programmed.
If not, the remote should be programmed
to operate the device. The program-
ming procedures
are explained below.
O
Press the MENU and MUTE button
continuously
at the same time for two seconds; the currently
selected
device button
is illuminated.
If you don't
press any button for 20 seconds, the light on the mode button will be turned
off. In that case,
you have to repeat from step 2.
O
Enter the appropriate
code from the code table on the following
pages. When pressing the button, the light
blinks at a time.
If the device turned off, the programming
is successful.
O
ress the MENU button to store the code. After blinking
twice, this code is stored.
O
Test the remote control functions
to see if the device responds properly.
If not, steps 2-5.
m
z
x
97
Advertisement
Table of Contents
