Table of Contents
Advertisement
APPENDIX
TROUBLESHOOTING
!wor k
Check to see if there is any object
between the product
and the remote control
causing obstruction.
Ensure you are pointing
the remote control
directly
at the TV.
_ Ensure that the batteries are installed
with correct
polarity
(+ to +, - to -).
_ Ensure that the correct
remote operating
mode is set: TV, VCR etc.
Install new batteries.
_ Is the sleep timer set?
_ Check the power control
settings. Power interrupted.
_ No broadcast
on station tuned with Auto off activated.
No picture & No sound
Picture appears slowly
after switching on
® Check whether the product
is turned on.
Try another
channel. The problem may be with the broadcast.
_ Is the power cord inserted
into wall power outlet?
_ Check your antenna direction
and/or
location.
_ Test the wall power outlet, plug another
product's
power cord into the outlet
where the product's
power cord was plugged
in.
This is normal, the image is muted during the product
startups
process. Please
contact your service center, if the picture has not appeared after five minutes.
_ Adjust Color in menu option.
_ Keep a sufficient
distance between the product
and the VCR.
® Try another
channel. The problem may be with the broadcast.
Are the video cables installed
properly?
Activate any function
to restore the brightness
of the picture.
Check for local interference
such as an electrical
appliance
or power tool.
_ Station or cable product
experiencing
problems,
tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
® Check for sources of possible interference.
_:_ Check antenna (Change the direction
of the antenna).
>
Z
x
. ZSZSZSZSZSZSZSZSZSZSZ
93
Advertisement
Table of Contents
