WASHING MACHINE Owner’s Instructions SWT50A1(P) / SWT50A2(P) / SWT50B1(P) / SWT55B1 BEFORE USING THE WASHING MACHINE 1 PRECAUTIONS CONTROL PANEL DESCRIPTION AND CLEANING OF PART 2 WASHING PROCEDURE To Wash To Spin Dry To Rinsing Overflow rinse Additional rinse INSTALLATION Location Connecting the drain hose Mounting the legs...
CONTROL PANEL BEFORE USING THE WASHING MACHINE CAUTIONS Remove the cap-hose Be sure that the washer is grounded. WASH TIMMER from the drain hose. To avoid electrical shock,use a This is used to set the metal pipe for the ground wash time, 1-15 minutes.
DESCRIPTION AND / CLEANING OF PARTS CLEANING THE FILTER Pull the overflow filter out and take up the filter by removing 3 screws as shown in figure. Wash the filter and washing tub. SPIN DRYER LID When you open this INNER LID lid while the spin basket is spinning,the spinning will...
WASHING PROCEDURE TO WASH TO SPIN DRY TO RINSING 1. Before starting to wash, proceed as follows, 1. Transfer the clothes into the 1. Set the CYCLE SELECTOR KNOB to Connect the water supply spin basket and arrange the ‘WASH.RINSE’. Wash/Rinse Wash hose and open the water tap.
INSTALLATION ADDITIONAL RINSE LOCATION CHANGING THE POSITION OF THE DRAIN HOSE 1 After rinsing you can select this Leave some space of course for more effective rinse at least 15cm between the washing machine Before attempting to change the position of the (Don't just select this course and the wall.
LAUNDRY GUIDE MAINTENANCE TROUBLE SHOOTING WASHING TIME TO LOAD THE LAUNDRY INTO TROUBLE CHECK POINT THE SPIN BASKET. WASHING WASHING TIME The washing Check that the power cord is TYPE OF CLOTHING Press the laundry evenly and put the safety SELECTION machine does properly connected to a power...