hit counter script
Husqvarna XP 535i Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. XP 535i
  6. Operator's manual
Husqvarna XP 535i Operator's Manual

Husqvarna XP 535i Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
535i XP
EN
Operator's manual
2-37

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna XP 535i

Summary of Contents for Husqvarna XP 535i

  • Page 1 ® 535i XP Operator's manual 2-37...

  • Page 2: Table Of Contents

    Introduction Intended use Product description This chainsaw for forest service is designed for forest Husqvarna 535i XP are chainsaw models with an work such as felling, limbing and cutting. electric motor. Work is constantly in progress to increase your safety...
  • Page 3 19. Chain tensioning screw 20. Drive sprocket cover (535i XP) 21. Charging LED Chain oil. 22. Warning indicator 23. Power cord 24. Combination wrench The direction in which the saw chain 25. Battery charger rotates and maximum length of the guide 26.

  • Page 4: Safety

    Double insulation. Safety Safety definitions • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of The definitions below give the level of severity for each electric shock. signal word. •...
  • Page 5 depending on the ways in which the tool is used. Shorting the battery terminals together may cause Operators should identify safety measures to protect burns or a fire. themselves that are based on an estimation of • Under abusive conditions, liquid may be ejected from exposure in the actual conditions of use (taking the battery;...
  • Page 6 • Maintain a firm grip, with thumbs and fingers • Turn to your servicing dealer or Husqvarna if you encircling the chain saw handles, with both hands have questions about the operation of the product. on the saw and position your body and arm to allow We can give you information about how to operate you to resist kickback forces.
  • Page 7 Common questions about kickback on page 15 for observed in order to reduce the increased risk instructions. of personal injury. Never work in a tree unless you have received specific, professional training for • Do not use a product, battery or battery charger that such work, including training in the use of safety is damaged or does not operate correctly.
  • Page 8 • If the safety devices are damaged or do not operate product. correctly, speak to your Husqvarna servicing dealer. Keypad The warning indicator flashes if the chain brake is engaged or if there is a risk of overload. The overload protection temporarily stops the product and you can not use the product until the temperature restores.
  • Page 9 the indicator shows a solid light, turn to your servicing dealer. How the chain brake is engaged is in relation to the force of the kickback and position of the product. If you get an intense kickback while the kickback zone is Automatic stop function farthest away from you, the chain brake engages by the The product has an automatic stop function that stops...
  • Page 10 Pull the front hand guard rearward to disengage the lockout against the handle (B), it releases the power chain brake. trigger (C). If you release the handle, the power trigger and the power trigger lockout move back to their initial position.
  • Page 11 • Do not use other battery chargers than the one • Only use original spare parts. supplied for your product. Only use Husqvarna QC Safety instructions for the cutting equipment chargers when you charge Husqvarna replacement batteries BLi. WARNING: Read the warning •...

  • Page 12: Assembly

    • Use protective gloves when you use or do guide bar, the saw chain can derail. An incorrect saw maintenance on the saw chain. A saw chain that chain tension increases wear on the guide bar, saw To adjust does not move can also cause injuries. chain and chain drive sprocket.

  • Page 13: Operation

    5. Make sure that there is no oil on the handles (E). • Use Husqvarna chain oil for maximum saw chain life 6. Do a check to make sure that all parts are correctly and to prevent negative effects on the environment.
  • Page 14 3. Make sure that the green charging light on the battery charger comes on. That means that the battery is connected correctly to the battery charger. Note: To see where the chain oil tank is on you Product overview on page 2 . product, refer to To connect the battery charger 4.
  • Page 15 use the product when the kickback occurs that causes must be large to engage the chain brake. If the chain the direction of the movement. brake is too sensitive, it can engage during rough operation. • Will the chain brake always protect me from injury during a kickback? No.
  • Page 16 2. Pull out the battery and press the battery release buttons to remove the battery from the battery holder. 5. Press and hold the start/stop button until the green LED light comes on. WARNING: Remove the battery when you do not use or when you do not have full vision of the product.
  • Page 17 • To cut on the push stroke is when you cut with the WARNING: Do not cut trunks in a top of the guide bar. The saw chain pushes the pile. That increases the risk of kickback product in the direction of the operator. and can cause serious injury or death.
  • Page 18 WARNING: There is a high accident risk when you use the limbing technique. Kickback information on page 14 for Refer to instructions how to prevent kickback. WARNING: Cut limbs one by one. Be careful when you remove small limbs and do 1.
  • Page 19 to a professional chainsaw operator Speak to an operator with experience for before you continue. more knowledge. 2. Remove the limbs on the top of the trunk. To keep a safe distance a) Keep the product on the trunk and let the guide 1.
  • Page 20 To free a trapped tree a high accident risk. Refer to on page 22 . To fell a tree Husqvarna recommends you to make the directional WARNING: During critical felling cuts and then use the safe corner method when you fell a tree.
  • Page 21 b) Make the bottom cut. Make sure that the end of a) Make a bore cut straight into the trunk to the bottom cut is at the same point as the end of complete the felling hinge width. the top cut. b) Cut on the pull stroke until ⅓...
  • Page 22 4. Cut off the corner to make the tree fall. 2. Figure out where the point of maximum tension is. Note: If the tree does not fall, hit the wedge until it does. 5. When the tree starts to fall, use the path of retreat to move away from the tree.

  • Page 23: Maintenance

    7. Continue to cut more into the tree until the tree/ 8. Cut the tree/branch from the opposite side of the branch bends and the tension is released. bend, after the tension is released. Maintenance Introduction The following is a list of the maintenance steps that you Maintenance on page 23 must do on the product.
  • Page 24 Maintenance Before Weekly Monthly Clean the external parts of the product. Make sure that the power trigger and the power trigger lockout function correctly from a safety point of view. Clean the chain brake and make sure that it operates safely. Make sure that the chain catcher is not damaged.
  • Page 25 To do a check of the power trigger lockout 4. Hold the rear handle and let go of the front handle. Let the product fall against the stump. 1. Make sure that the power trigger and power trigger lockout move freely and that the return spring works correctly.
  • Page 26 Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety Accessories on functions of the product. Refer to page 34 , for a list of replacement bar and chain combinations that we recommend.
  • Page 27 • Guide bar length, in/cm. Information about the guide bar length can usually be found on the rear end of the guide bar. • Number of teeth on bar tip sprocket (T). • Drive link width, mm/in. • Chain pitch, in. The distance between the drive links of the saw chain must align with the distance of the teeth on the bar tip sprocket and drive sprocket.
  • Page 28 It is not easy to sharpen a saw chain correctly without cutting performance you must remove filing material the correct equipment. Use a Husqvarna recommended from the depth gauge (B) to receive the recommended file gauge. This will help you to keep maximum cutting Accessories on page 34 depth gauge setting.
  • Page 29 1. Use a flat file and a depth gauge tool to adjust 2. Lift the front of the guide bar and turn the chain the depth gauge setting. Only use a Husqvarna tensioning screw. Use the combination wrench. recommended depth gauge tool to get the correct depth gauge setting and bevel for the depth gauge.
  • Page 30 To do a check of the chain drive 2. If the saw chain lubrication is correct, you will see a clear line of oil on the surface after 1 minute. sprocket • Examine the chain drive sprocket for wear. Replace the chain drive sprocket if it is necessary.

  • Page 31: Troubleshooting

    To do a check of the guide bar 5. Examine if the guide bar tip is rough or very worn. 1. Make sure that the oil channel is not blocked. Clean if it is necessary. 2. Examine if there are burrs on the edges of the guide bar.

  • Page 32: Transportation, Storage And Disposal

    Battery Problem Possible faults Possible solution Green LED flashes. Low battery voltage. Charge the battery. Red error LED flashes. The battery is empty. Charge the battery. Temperature deviation. Use the battery in temperatures between -10°C (14°F) and 40°C (104°F). Overvoltage. Remove the battery from the battery charger.

  • Page 33: Technical Data

    for electrical and electronic equipment. This helps to Note: The symbol shows on the product or package of prevent damage to the environment and to persons. the product. Speak to local authorities, domestic waste service or your dealer for more information. Technical data Technical data 535i XP...

  • Page 34: Accessories

    If you are not sure how to identify the type of saw chain on your product, refer to for more information. Use a Husqvarna file gauge to sharpen the saw chain. A Husqvarna file gauge makes sure that you get the correct filing angles.
  • Page 35 5/32 in / 4.0 0.025 in / 595 00 595 00 SP21G 60° 30° 0° 0.65 mm 46-01 47-01 Approved batteries for the product Battery BLi200/BLi200X 40-B220X Type Lithium-ion Lithium-ion Battery capacity, Ah Nominal voltage, V Weight, lb/kg 2.9/1.3 Approved battery chargers Battery charger QC330 Input voltage, V...

  • Page 36: Declaration Of Conformity

    Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated chainsaw Brand Husqvarna Type / Model 535i XP Identification Serial numbers dating from 2022 and onwards...
  • Page 37 UK Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated chainsaw Brand Husqvarna Type / Model 535i XP Identification Serial numbers dating from 2022 and onwards complies fully with the following UK regulations:...
  • Page 38 2145 - 005 - 07.06.2024...
  • Page 39 2145 - 005 - 07.06.2024...
  • Page 40 Original instructions 1144081-26 2024-06-10...

Table of Contents