Panasonic nanoe EH-NA67 - Hair Dryer Manual

OPERATING INSTRUCTIONS

A nanoe is a nano-sized ion particle coated with water particles.

This product is intended for household use only.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug cannot be inserted fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

This appliance is also provided with an ALCI protective device that may make the appliance inoperable under some abnormal conditions (such as immersion of the appliance). If the appliance becomes inoperable, return the appliance to a service center for examination and repair. Each time the appliance is used, check the safety plug to verify it is in proper working order. Plug the appliance in an electrical outlet and press the test button. The hair dryer should stop immediately. To resume operation, press the reset button.

This hair dryer is equipped with an automatic overheating protective device. If the hair dryer overheats, it will switch to cool air mode. Switch off the hair dryer and unplug it from the household outlet. Allow it to cool down for a few minutes before using it again. Check that no fluff, hair etc. is in the air inlets and outlets before switching it on again.
The thermostat will automatically reset.

Parts identification

1. Air outlet
2. Concentrator nozzle
3. nanoe outlet
4. nanoe lamp
5. Cool-shot button
6. Handle
7. Ring for hanging
8. Cord
9. Power plug
10. Temperature selector
    HOT: Hot air
    WARM: Warm air
    COOL: Cool air
11. Power switch
    HIGH: Strong airflow
    LOW: Gentle airflow
    OFF: Off
12. Air inlet grille
13. Filter
    Make sure to attach the filter to the air inlet when using the hair dryer.
14. Panel
15. Oscillating quick-dry nozzle
16. Diffuser

Concentrator nozzle
Focuses and concentrates airflow for precise hair styling.

Oscillating quick-dry nozzle
Delivers strong and soft airflows for fast drying. Automatically moves to prevent hot spots for more gentle drying.
Attach the oscillating quick-dry nozzle so this air outlet is vertical.

Diffuser
For creating full-bodied hair with lots of volume and styling

How to use the device

Always check that the filter is securely attached before using.

1. Select the temperature of the airflow with the temperature selector ( ).
2. Select the intensity of the airflow with the power switch ( ).

Notes

• The air remains cool while the cool-shot button is held down.
• nanoe is produced when the power switch ( ) is set to position "LOW" to "HIGH".
• nanoe is invisible to the naked eye.
• If you are worried about hair damage, set the switch to "LOW" Gentle airflow" before use.
• Drops of water may blow out of the nanoe outlet ( ) during use, but this is not a malfunction.
• A humming noise may come out of the nanoe outlet ( ), but this is the sound of nanoe being discharged and is not a malfunction.
• The effects of nanoe might not be felt by the following people. People with crimpy hair, strong curly hair, very smooth hair, short hair, or who have had a hair straightening perm in the last three or four months.
• You may notice a characteristic odor when using this hair dryer. This is not harmful to the human body.

The best recommended usage of the oscillating quick-dry nozzle

• When using the oscillating quick-dry nozzle in automatic swing mode, make sure to set the wind speed to "HIGH".

1. Please confirm that the power switch is set to the position "OFF" before using the oscillating quick-dry nozzle.
2. Hold the both sides of the oscillating quick-dry nozzle with your hands, and pull it out gently with force until you hear a "click" sound, indicating that the automatic swing mode of the oscillating quick-dry nozzle has been turned on.
   
3. Choose the temperature of wind as required.
4. Set the power switch to "HIGH".
   • If you want to dry your hairs quickly, it is recommended to choose the mode "HIGH" + "HOT" or "WARM".
     
5. Dry your hair, then turn off the automatic swing mode for the oscillating quick-dry nozzle before tidying your hair.
   
   • Make sure that the power switch is set to the position "OFF".
   • Hold the both sides of the oscillating quick-dry nozzle with your hands, and slightly press it inward with force until you hear a "click" sound, indicating that the automatic swing mode of the oscillating quick-dry nozzle has been locked.
6. Set the wind speed to "LOW", then set the temperature of the wind to "COOL ". Finally, set your hair according to your own particular preferences.

Note
Oscillating quick-dry nozzle may not function properly at low power mode ("LOW").

About nanoe

What is nanoe?

(nanoe, generation method: high voltage discharge) nanoe is generated by collecting the available moisture in the air, so depending on the usage environment, nanoe may not be generated. In environments of low temperature and low humidity, moisture in the air becomes difficult to collect. When this occurs, negative ions are generated. nanoe is ion wrapped in water that are invisible to the human eye.

How nanoe works

Generally hair has properties which make it easy to become positively charged with electricity. These properties attract strongly negatively charged nanoe which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles and keep your hair strong, elastic and healthy.

Panel effect

When nanoe continues to strike hair, hair becomes negatively charged. As a result, the nanoe and negatively charged hair repel each other, making it difficult for nanoe to reach hair. With the nanoe Charge System, by just gripping the panel together with the handle, the negative charge accumulated on hair is released. Because of this, nanoe continues to penetrate into hair, supplying moisture and thoroughly moistening down to the tips of hair.

Maintenance of the product

Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing maintenance on the air outlet)

Maintaining the main body

Do this when dirty
To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out firmly, then wipe with the cloth.

Notes

• Do not use substances such as alcohol, nail polish remover or detergent (hand soap).
  Doing so may result in malfunction or part cracks or discoloration.
  
• Do not leave the appliance with hairdressing products or cosmetics on it.
  Doing so will cause deterioration of the plastic, leading to discoloration and cracks.

Maintaining the nanoe outlet

• Use commercially available cotton swabs. (We recommend the thin cotton swabs made for use with babies.)
• This maintenance allows the hair dryer to sustain the generated level of nanoe over a long period.

1. Dampen the end of the cotton swab with tap water.
2. A needle portion is located deep within the nanoe outlet. Using the swab, rub this portion gently about 5 times.
   

Maintaining the ait inlet

Clean the air inlet once a month or over.

• When dust etc. has built up, detach the filter from the hair dryer and remove the dust etc. using a toothbrush or vacuum cleaner.
• Use a commercially available toothbrush.

1. Pull on the catch on the bottom side of the filter to detach.
   
2. Remove any dust etc. adhered to the filter or air inlet grille.
   • Remove the dust etc. adhered to the outside of the filter using a vacuum cleaner. If this does not remove the dust, use the thick part of your fingers to push the dust etc. through the fine mesh on the internal side towards the metal mesh on the external side, and scrub away carefully with a toothbrush.
   • Using the toothbrush, carefully scrub away any dust etc. from the internal side of the filter.
   • Using a vacuum cleaner or toothbrush, carefully remove any dust etc. adhered to the air inlet.
   • Rubbing forcefully with your nails may tear the filter, so please use a toothbrush.
3. Attach the filter securely, starting with the upper side.
   
   • Keep pressing until you hear a "click" from both upper and lower catches.

Maintaining the air outlet

• The hair dryer should be plugged into the household outlet only in case of maintenance for the air outlet.
• Use a commercially available toothbrush.
• Switch the temperature selector to "COOL" and blow away the dust etc. as you scrub with the toothbrush.
  
• During maintenance, do not block the air inlet with your hands etc.
• Be careful when using the hair dryer for the first time after maintenance, since it may blow out dust etc.

Troubleshooting

Problem	Possible cause	Action
It switches frequently to cold air while using in "HOT" mode, or sparks can be seen within the body. (These sparks are caused by the thermostat switch, the protective device, and this is not dangerous.)	Lint has accumulated on the air inlet or air outlet. Hair or something is blocking the air inlet.	Remove accumulated lint. Do not block the air inlet.
The hot air is abnormally hot
The power plug is abnormally hot	The connection to the household outlet is loose.	Use a household outlet that fits securely.
Sparks are generated inside the nanoe outlet	Abnormality caused by a dirty electrode (needle portion).	Perform maintenance of the nanoe outlet.
The nanoe outlet emits a crackling noise

If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.

Specifications

Product name	Hair Dryer
Product model	EH-NA67
Power source	125 V~ 60 Hz
Power consumption	1 875 W
Accessories	Concentrator nozzle, Oscillating quick-dry nozzle, Diffuser

This product is intended for household use only.

GFCI

If YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide which type is best for you- a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCI's in the bathrooms, garages, and outdoor outlets of all new homes.

WHY DO YOU NEED A GFCI?
Electricity and water don't mix. If your hair dryer falls in water while it's plugged in, the electric shock can kill you...even if the switch is "off". A regular fuse or circuit breaker won't protect you under these circumstances. A GFCI offers you far greater protection.

A GFCI can save your life! Compared to that, the price is small!! Don't wait...install one now!
*GFCI is a sensitive device which reacts immediately to a small electric current leak by stopping the electricity flow.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER

As with most electrical appliances, electrical parts are electrically live even when the switch is off.
To reduce the risk of death by electric shock:

1. Always "unplug" it immediately after using.
2. Do not use while bathing.
3. Do not place or store this appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, "unplug it" immediately.Do not reach into the water.

To reduce the risk of burns, electrocution, fire, or injury to persons:

1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual.
   Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped into water. Return the appliance to a service center for examination and repair.
5. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked.
   Keep the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening.
9. Do not use outdoors or operate where aerosol(spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair away from the air inlets.
15. Do not use with voltage converter.
16. Do not use in countries with 220/240 volt electrical systems- use only with 120 volt electrical systems.

SAVE THESE INSTRUCTIONS

Safety precautions

To reduce the risk of injury, loss of life, electric shock, fire, and damage to equipment or property, always observe the following safety precautions.

Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

	Denotes a potential hazard that will result in serious injury or death.
	Denotes a potential hazard that could result in serious injury or death.
	Denotes a hazard that could result in minor injury or property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

	This symbol is used to alert users to a specific operating procedure that must not be performed.
	This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

Some parts of the safety precaution illustrations differ from the actual product.

Do not keep within the reach of children.
Do not let them use the appliance.

• Doing so may cause burns, electric shock or injury

Never modify, disassemble, or repair.

• Doing so may cause ignition or injury due to abnormal operation.
  Contact an authorized service center for repair.

Do not damage the cord or plug.

• Do not deface, modify, forcefully bend or pull the cord or plug. Also, do not place anything heavy on, twist or pinch the cord.
  • 
    Doing so may cause electric shock, burn or fire due to a short circuit.

Do not use with the cord bundled.

• 
  Doing so may cause fire or electric shock.

Do not wrap the cord tightly around the main body when storing.

• 
  Doing so may cause the wire in the cord to break with the load, and may cause electric shock or fire due to a short circuit.

Do not store or use the cord in a twisted state.

• 
  Doing so may cause the wire in the cord to break with the load, leading to electric shock or fire due to a short circuit.

Do not use when the power plug or cord is damaged or hot.

• 
  Doing so may cause burn, electric shock, or fire due to a short circuit.

Never use the appliance if the power plug fits loosely in a household outlet.

• 
  Doing so may cause burn, electric shock, or fire due to a short circuit.

Do not connect or disconnect the power plug to a household outlet with a wet hand.

• Doing so may cause electric shock or injury.

Do not use the appliance with a wet hand.

• 
  Doing so may cause electric shock or fire due to a short circuit.

Do not leave the area with the power switch left on.

• Doing so may cause fire.

Do not store the appliance in a bathroom or location with high humidity. Also, do not place in a location where water may spill (such as top of a vanity).

• Doing so may cause electric shock or fire.

Do not block, or insert hair pins or other foreign objects into the air inlet, air outlet, or nanoe outlet.

• 
  Doing so may cause fire, electric shock, or burn.

Do not use in proximity of flammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover).

• Doing so may cause an explosion or fire.

Do not immerse the appliance in water.
Do not use this hair dryer near water.
Do not use this hair dryer near bathtubs, showers, basins or other vessels containing water.

• 
  Doing so may cause electric shock or fire.

Immediately stop using and remove the power plug if there is an abnormality or failure.

• 
  Failure to do so may cause fire, electric shock, or injury.

<Abnormality or failure cases>

• Air is not emitted
• Unit stops sporadically
• Interior becomes red hot and smoke is emitted
  • Immediately request inspection or repair at an authorized service center.

Use the household outlet alone: do not use with an extension cord.

• 
  Failure to do so may cause fire or electric shock.

Fully insert the power plug into a household outlet.

• 
  Failure to do so may cause fire or electric shock.

Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the appliance.

• 
  Failure to do so may cause fire, electric shock, or burn.

If you see sparks around the air outlet while using the hot air setting, stop use and remove the lint on the air outlet and air inlet.

• 
  Failure to do so may cause burn or fire.

Always turn OFF the power switch and disconnect the power plug from the household outlet after use.

• 
  Failure to do so may cause fire or burn.

Disconnect the power plug by holding onto it instead of pulling on the cord.

• 
  Failure to do so may cause the wire in the cord to break, and may cause burn, electric shock, or fire due to a short circuit.

Regularly clean the power plug to prevent dust from accumulating.

• Failure to do so may cause fire due to insulation failure caused by humidity. Disconnect the power plug and wipe with a dry cloth.

When the hair dryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair dryer is switched off.

• Failure to do so may cause an accident or injury.

For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

• Failure to do so may cause an accident or injury.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

• Failure to do so may cause an accident or injury.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• Failure to do so may cause an accident or injury.

Do not drop or subject to shock.

• Doing so may cause electric shock or ignition.

Do not use with the air inlet damaged.

• Your hair may get dangled in the air inlet, which could damage the hair.

Do not touch the air outlet, concentrator nozzle, oscillating quick-dry nozzle, and diffuser, which will become very hot.

• 
  Doing so may cause burn.

Do not use on children or infants.

• 
  Doing so may cause burn.

Never use the hair dryer with the filter removed.

• Your hair may get dangled in the air inlet, which could damage the hair.

Do not wash the filter in water.

• 
  Doing so may cause fire or electric shock.

Be sure to keep a distance of over 3 cm (1-3/16˝ ) between the air outlet and your hair.

• 
  Failure to do so may cause burns to the hair.

Be sure to keep your hair at least 10 cm (3-15/16˝ ) away from the air inlet.

• Your hair may get tangled in the air inlet, which could damage the hair.

Only use for drying or styling human hair. (Do not use on pets, or to dry clothing, shoes, etc.)

• 
  Failure to do so may cause fire or burn.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Panasonic nanoe EH-NA67 - Hair Dryer Manual