Advertisement
Quick Links
DCP-J1200W
EN
You must complete steps
1
1
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
* Use these inbox ink cartridges
for the initial installation.
2
Load plain A4 paper in the paper tray
Pull the paper tray completely
out of the machine, and then
open the output paper tray cover.
3
Connect the power cord and install the inbox ink cartridges
Connect the power cord.
4
Check the print quality
The machine prints the Print Quality Check
Sheet.
Connect your computer or mobile device to your machine
5
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit
setup.brother.com
to download and install Brother
software.
setup.brother.com
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
J1200WRE1
o cerca il tuo prodotto tra le
Quick Setup Guide
Read the Product Safety Guide first, then read this guide for the correct installation procedure.
Brother recommends keeping this guide next to your Brother machine for quick reference.
Video setup instructions:
support.brother.com/videos
-
to be able to use this machine.
5
Fan the paper well and load it in
the tray.
Open the ink cartridge cover.
OK
Check the print quality of the four colour blocks on the
sheet.
Follow the on-screen instructions and
prompts.
NOTE
For USB Connection, locate the USB port inside
the machine as shown.
migliori offerte di Stampanti
The latest manuals are available at the Brother support website:
support.brother.com/manuals
NOTE
• The components included in the box may differ depending on your country.
• Save all packing materials and the box in case you must ship your machine.
• You must purchase the correct interface cable for the interface you want to use.
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.
• Brother aims to reduce waste and save the raw materials and energy required for their
production. Read more about our environmental work at www.brotherearth.com.
For more information about paper handling and sizes, see the Online User's Guide
at support.brother.com/manuals.
Adjust the paper guides.
Unpack and install the inbox ink
cartridges.
If the quality of any of the four colour blocks is Poor (see the image on the
Poor
left), we strongly recommend cleaning the print head to improve the print
quality.
See the Improve Print Quality section in this guide.
NOTE
To change the language of the sheet, see the Online User's Guide at
support.brother.com/manuals.
Close the output paper tray
Pull out the paper support a, and
cover, and then slowly push the
unfold the paper support flap b so
paper tray completely into the
that the printed pages do not fall.
machine.
Close the ink cartridge cover. The machine will prepare the ink tube
system for printing.
Wait until the machine prints the Print Quality Check Sheet and go to
4
.
NOTE
The first time you install a set of ink cartridges, the machine will use
an amount of ink to fill the ink delivery tubes for high-quality printouts.
This process will only happen once.
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine's settings is
located on the back of the machine and marked "Pwd". We
recommend immediately changing the default password to
protect your machine from unauthorised access.
Brother DCP-
D01U0L001-00
UK
Version 0
2
1
Advertisement
Related Manuals for Brother DCP-J1200WRE1
Summary of Contents for Brother DCP-J1200WRE1
- Page 1 We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long. • Brother aims to reduce waste and save the raw materials and energy required for their production. Read more about our environmental work at www.brotherearth.com.
- Page 2 Warning LED Custom - To change these settings, access the Print menu in Web Based Management using either the Brother Mobile Connect app on your mobile device or j Power/Stop button the Brother iPrint&Scan app on your computer. For details, see the Online User's k Wi-Fi button * Guide.