hit counter script
Mitsubishi Electric MELSEC-L LJ72GF15-T2-U-HW-C Safety Manuallines
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Controller
  5. MELSEC-L LJ72GF15-T2-U-HW-C
  6. Safety manuallines
Mitsubishi Electric MELSEC-L LJ72GF15-T2-U-HW-C Safety Manuallines

Mitsubishi Electric MELSEC-L LJ72GF15-T2-U-HW-C Safety Manuallines

Programmable controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Safety Guidelines
Thank you for purchasing the Mitsubishi Electric programmable
controller MELSEC-L series.
Prior to use, please read this and relevant manuals thorougly to fully
understand the product.
© 2012 MITSUBISHI ELECTRIC CORPORATION
MODEL LJ72GF15-T2-U-HW-C
MODEL
CODE
IB(NA)-0800482CHN-
C(1704)MEACH
-

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric MELSEC-L LJ72GF15-T2-U-HW-C

Summary of Contents for Mitsubishi Electric MELSEC-L LJ72GF15-T2-U-HW-C

  • Page 1 Safety Guidelines Thank you for purchasing the Mitsubishi Electric programmable controller MELSEC-L series. Prior to use, please read this and relevant manuals thorougly to fully understand the product. MODEL LJ72GF15-T2-U-HW-C MODEL CODE IB(NA)-0800482CHN- C(1704)MEACH © 2012 MITSUBISHI ELECTRIC CORPORATION...

  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS (Read these precautions before using this product.) Before using the MELSEC-L series product, please read this manual and the relevant manuals carefully and pay full attention to safety to handle the product correctly. In this manual, the safety precautions are classified into two levels: "...
  • Page 3 [Design Precautions] WARNING ● Configure safety circuits external to the programmable controller to ensure that the entire system operates safely even when a fault occurs in the external power supply or the programmable controller. Incorrect output or malfunction due to a communication failure may result in an accident. (1) Emergency stop circuits, protection circuits, and protective interlock circuits for conflicting operations such as forward/reverse rotations or upper/lower limit positioning must be configured external to the...
  • Page 4 [Design Precautions] WARNING ● Configure a circuit so that the external power supply is turned off first and then the programmable controller. If the programmable controller is turned off first, an accident may occur due to an incorrect output or malfunction. ●...
  • Page 5 [Design Precautions] WARNING Precautions for using digital-analog converter modules and analog input/output modules ● When a module is faulty, analog outputs may remain on. Configure an external circuit for monitoring output signals that could cause a serious accident. Precautions for using high-speed counter modules and flexible high-speed I/O control modules ●...
  • Page 6 [Design Precautions] WARNING Precautions for using flexible high-speed I/O control modules ● When changing data and operating status of the running module from an external device such as a personal computer connected, configure an interlock circuit external to the programmable controller to ensure that the entire system always operates safely.
  • Page 7 [Design Precautions] CAUTION ● Do not install the control lines or communication cables together with the main circuit lines or power cables. Keep a distance of 100mm or more between them. Failure to do so may result in malfunction due to noise. ●...
  • Page 8 [Installation Precautions] WARNING ● Shut off the external power supply for the system in all phases before mounting or removing the module. Failure to do so may result in electric shock or cause the module to fail or malfunction. [Installation Precautions] CAUTION ●...
  • Page 9 [Wiring Precautions] CAUTION ● Ground the FG and LG terminals to the protective ground conductor dedicated to the programmable controller. Failure to do so may result in electric shock or malfunction. ● Use applicable solderless terminals and tighten them within the specified torque range.
  • Page 10 [Wiring Precautions] CAUTION ● Prevent foreign matter such as dust or wire chips from entering the module. Such foreign matter can cause a fire, failure, or malfunction. ● A protective film is attached to the top of the module to prevent foreign matter, such as wire chips, from entering the module during wiring.
  • Page 11 [Startup and Maintenance Precautions] WARNING ● Do not touch any terminal while power is on. Doing so will cause electric shock or malfunction. ● Shut off the external power supply for the system in all phases before cleaning the module or retightening the screws on the terminal block or connector screws.
  • Page 12 [Startup and Maintenance Precautions] CAUTION Precautions for using flexible high-speed I/O control modules ● When performing online operations of the running module from an external device such as a personal computer connected, read the relevant manuals carefully and ensure that the operation is safe before proceeding. ●...
  • Page 13 PRÉCAUTIONS DE SÉCURITÉ (Lire ces précautions avant toute utilisation du produit.) Avant d'utiliser un produit de la série MELSEC-L, prendre la peine de lire ce manuel et les autres manuels associés et observer soigneusement toutes les précautions de sécurité à propos de la manipulation du produit. Dans ce manuel, les précautions de sécurité...
  • Page 14 [Précautions lors de la conception] AVERTISSEMENT ● Configurer des circuits de sécurité extérieurs à l'automate programmable pour garantir la sécurité du système dans son ensemble à la survenance d'une anomalie dans l'alimentation externe comme dans l'automate programmable. Une sortie erronée ou un dysfonctionnement suite à une erreur de communication peuvent être à...
  • Page 15 [Précautions lors de la conception] AVERTISSEMENT ● Configurer un circuit qui coupera d'abord l'alimentation externe puis l'automate programmable. Si c'est l'automate programmable qui est mis hors tension en premier, il y a risque d'accident en cas de sortie erronée ou autre dysfonctionnement. ●...
  • Page 16 [Précautions lors de la conception] AVERTISSEMENT ● Le débranchement d'un câble de communication (comme un câble dédié CC- Link) peut rendre la ligne instable et entraîner des erreurs de communications dans de multiples stations du réseau. Constituer un circuit de verrouillage dans le programme permettant de maintenir la sécurité...
  • Page 17 [Précautions lors de la conception] AVERTISSEMENT Précautions d'utilisation des modules de positionnement ● Configurer des circuits de sécurité extérieurs à l'automate programmable pour garantir la sécurité du système dans son ensemble à la survenance d'une anomalie dans l'alimentation externe comme dans l'automate programmable. Une sortie erronée ou un dysfonctionnement suite à...
  • Page 18 [Précautions lors de la conception] ATTENTION ● Le retour en position absolue par le module de positionnement peut entraîner une suspension du signal servo (servo off) d'une durée de l'ordre de 60ms pendant lesquelles le moteur pourrait se mettre en marche inopinément. Si cela pose problème, prévoir un frein électromagnétique pour bloquer le moteur pendant le retour en position absolue.
  • Page 19 [Précautions lors de la conception] ATTENTION Précautions d'utilisation des modules convertisseurs numériques-analogiques haute résolution avec isolation et double voie ● Ne pas installer le câble des signaux analogiques au voisinage de lignes du circuit principal, de câbles d'alimentation ou de lignes de circuit de charge d'un dispositif autre que l'automate programmable.
  • Page 20 [Précautions d’installation] AVERTISSEMENT ● Couper l'alimentation externe du système sur toutes les phases avant la mise en place ou le retrait du module. Faute de quoi, il y a risque d'électrocution et le module risque de tomber en panne ou de mal fonctionner. [Précautions d’installation] ATTENTION ●...
  • Page 21 [Pécautions de câblage] AVERTISSEMENT ● Couper l'alimentation externe du système sur toutes les phases avant de commencer à câbler. Faute de quoi, il y a risque d'électrocution et le module risque de tomber en panne ou de mal fonctionner. ● Après installation et câblage, mettre en place les couvre-bornes fournis avec le produit avant la mise sous tension et la mise en service.
  • Page 22 [Pécautions de câblage] ATTENTION ● Mettre à la masse les bornes FG et LG sur le conducteur réservé à la protection à la terre de l'automate programmable. Faute de quoi, il y a risque d'électrocution et de dysfonctionnement. ● Utiliser des bornes sans soudure de type approprié et serrer au couple de serrage prescrit.
  • Page 23 [Pécautions de câblage] ATTENTION ● Pour débrancher le câble de communication du module, ne jamais tirer sur le câble proprement dit. Si le câble a un connecteur, saisir le connecteur au main et débrancher en tirant par le connecteur. Pour un câble raccordé sur une plaque à bornes, desserrer la vis de la borne.
  • Page 24 [Pécautions de câblage] ATTENTION Précautions d'utilisation du module maître CC-Linl/LT ● Pour les CC-Link/LT, utiliser les câbles préconisés par la CC-Link Partrner Association. L'utilisation de câbles autres que les câbles préconisés ne permet de garantir les performances du CC-Link/LT. Pour le câblage du réseau, suivre les prescriptions du Manuel de l'utilisateur Module maître MELSEC-L CC-Link/LT.
  • Page 25 [Précautions de mise en service et de maintenance] ATTENTION ● Serrer les vis des plaques à bornes et les vis des connecteurs dans les limites du couple de serrage prescrit. Un serrage insuffisant peut être à l'origine d'un détachement de pièces ou de fils et entraîner des dysfonctionnements. Un serrage excessif peut endommager les vis et/ou le module, avec aussi un risque de chute, de court-circuits et de dysfonctionnements.
  • Page 26 [Précautions d'exploitation] ATTENTION ● Pour intervenir sur un automate programmable en marche (en particulier pour un changement de données, une modification de programme ou un changement d'état opérationnel) à partir d'un dispositif externe raccordé à un module fonctionnel intelligent, lire attentivement le manuel de l'utilisateur avant l'intervention pour pouvoir garantir la sécurité.

  • Page 27: Conditions Of Use For The Product

    CONDITIONS OF USE FOR THE PRODUCT (1) Mitsubishi programmable controller ("the PRODUCT") shall be used in conditions; i) where any problem, fault or failure occurring in the PRODUCT, if any, shall not lead to any major or serious accident; and ii) where the backup and fail-safe function are systematically or automatically provided outside of the PRODUCT for the case of any problem, fault or failure occurring in the PRODUCT.
  • Page 28 Notwithstanding the above, restrictions Mitsubishi may in its sole discretion, authorize use of the PRODUCT in one or more of the Prohibited Applications, provided that the usage of the PRODUCT is limited only for the specific applications agreed to by Mitsubishi and provided further that no special quality assurance or fail-safe, redundant or other safety features which exceed the general specifications of the PRODUCTs are required.

  • Page 29: Table Of Contents

    CONTENTS SAFETY PRECAUTIONS ................... 1 CONDITIONS OF USE FOR THE PRODUCT ..........26 MANUAL ......................29 ABOUT THE MODEL NAMES................30 1. CHECKING THE INCLUDED ITEMS ............31 2. GENERAL SPECIFICATIONS ..............32 3. MOUNTING THE MODULES ............... 34 Precautions for Connecting and Mounting Modules ......34 Connecting Modules ................

  • Page 30: Manual

    MANUAL The manual related to this product is shown below. Please place an order as needed. For the latest manual (PDF), please contact the local dealers. Related Manual Manual name Manual number MELSEC-L CC-Link IE Field Network Head Module User's Manual Explains the specifications, preparation and setup, system SH-080919ENG configuration, setting, and troubleshooting of the head module.

  • Page 31: About The Model Names

    ABOUT THE MODEL NAMES (1) Manual "-CM" is not applied to the model names in the manuals sold separately. For the manuals Please regard LJ72GF15-T2 as LJ72GF15-T2-CM. (2) Programming tool "-CM" is not applied to the model names displayed on the programming tool.

  • Page 32: Checking The Included Items

    1. CHECKING THE INCLUDED ITEMS The following items are included in the package of this product. Before use, check that all the items are included. Head module + END cover (L6EC-CM) This manual...

  • Page 33: General Specifications

    2. GENERAL SPECIFICATIONS This section provides specifications common to the relevant modules. Item Specifications Operating ambient temperature 0 to 55°C Température 0 à 55°C ambiante de fonctionnement Storage ambient -25 to 75°C temperature Operating ambient humidity 5 to 95%RH, non-condensing Storage ambient humidity Constant...
  • Page 34 *2 This indicates the level of the power supply (the location ranging from the public power distribution network to the machinery within premises) that is used to run the equipment. Category II applies to equipment to which electrical power is supplied from fixed facilities. The surge voltage withstand level of equipment with rated voltage of up to 300V is 2500V.

  • Page 35: Mounting The Modules

    3. MOUNTING THE MODULES This section explains how to interconnect modules and how to mount them on a DIN rail. POINT (1) Modules must be mounted on a DIN rail. (2) Attach an END cover to the right side of the endmost module. (3) For installation environment and mounting position of the modules, refer to the following.
  • Page 36 • Montage des modules Pour installer l'automate programmable dans un tableau de commande, prendre en compte tous les aspects d'opérabilité, de maintenabilité et de résistance à l'environnement. Fixer fermement sur un rail DIN tous les modules de la série MELSEC-L à utiliser. Pour le détail de l'installation, voir aussi le MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection) (Manuel de l'utilisateur MELSEC-L CPU module (conception du matériel, maintenance et...

  • Page 37: Connecting Modules

    Connecting Modules This section explains the procedure for connecting modules with an example of how to connect the head module with the L61P-CM. Shut off the external power supply (all phases) used in the system before connecting a module. Release 1.
  • Page 38 5. Slide the levers toward the back side of the module until they click. Make sure that the modules are securely connected. To lock the levers, push the projection (1) of the lever. POINT • Failure to securely lock the module joint levers until they click may cause malfunction, failure, or drop of the module.

  • Page 39: Mounting The Modules On A Din Rail

    Mounting the Modules on a DIN Rail This section explains the procedure for mounting the modules on a DIN rail. POINT An example of the use of the DIN rail stopper is described in the following procedure. Fix the module according to the manual of the DIN rail stopper used.
  • Page 40 5. Hitch the bottom hook of the DIN rail stopper to the bottom of the DIN rail. Check the orientation of the DIN rail stopper according to the arrow on the front of the stopper. Hitch the hook to bottom of the DIN rail Hitch the hook to top of the DIN rail 6.
  • Page 41 POINT Do not slide modules from the edge of the DIN rail when mounting. Doing so may damage the metal part located on the back of the module.

  • Page 42: Emc And Low Voltage Directives

    Low Voltage Directives are required to attach a "CE mark" on their products. (1) Sales representative in EU member states The sales representative in EU member states is: Name: MITSUBISHI ELECTRIC EUROPE B.V. Address: Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany...

  • Page 43: Measures To Comply With The Emc Directive

    Measures to Comply with the EMC Directive The EMC Directive specifies that "products placed on the market must be so constructed that they do not cause excessive electromagnetic interference (emissions) and are not unduly affected by electromagnetic interference (immunity)". This section summarizes the precautions on compliance with the EMC Directive of the machinery constructed with the MELSEC-L series modules.
  • Page 44 (b) Immunity requirements Specification Test item Test details Standard value EN61000-4-2 Immunity test in Electrostatic which electrostatic is • 8kV Air discharge discharge applied to the cabinet • 4kV Contact discharge immunity of the equipment. EN61000-4-3 Immunity test in 80% AM modulation@1kHz Radiated, radio- which electric fields •...
  • Page 45 (2) Installation in a control panel The programmable controllers are open type devices and must be installed inside a control panel. This ensures safety as well as effective shielding of programmable controller-generated electromagnetic noise. *1 Modules on the remote station in each network must be also installed inside the control panel.
  • Page 46 Note the following when using cables for CC-Link IE Field Network. • Be sure to use the cables for the CC-Link IE Field Network (SC-E5EW-SM, manufactured by Mitsubishi Electric System & Service Co., Ltd.). • Shielded cables should be used for the CC-Link IE Field Network.
  • Page 47 (4) Cables used for the modules connected to the head module Use shielded cables for the cables which are connected to the I/O modules and may be extended out of the control panel. If a shielded cable is not used or not grounded correctly, the noise immunity will not meet the specified value.
  • Page 48 (b) Grounding a twisted pair cable • Always use shielded twisted pair cables for connection to 10BASE-T and 100BASE-TX connectors. For the shielded twisted pair cable, strip a part of the jacket as shown below and ground the exposed shield section to the ground as much as possible.
  • Page 49 (d) Grounding cables with a cable clamp Use shielded cables for external wiring and ground the shields of the external wiring cables to the control panel with the AD75CK-type cable clamping (Mitsubishi). (Ground the shield section 20 to 30cm away from the module.) Inside the control panel 20 to 30cm AD75CK...
  • Page 50 (e) Connectors for external devices When using connectors for external devices with any of the following modules, take the noise reduction measures described below. • High-speed counter module • Positioning module • Flexible high-speed I/O control module [Wiring example when using shielded cables] The following figure shows the example of wiring using A6CON1 for noise reduction.
  • Page 51 [Wiring example when using a duct (Example of a problem and its solution)] Wiring duct Relay Relay Drive Drive Relay unit unit Control panel The drive units are placed Programmable near the noise source. The controller connection cable between Noise source the programmable controller and drive units is too long.
  • Page 52 (g) Power cables for external power supply terminal As an external power supply for the following modules, use a CE-marked AC/DC power supply with a reinforced insulation or a double insulation. Install the AC/DC power supply in the control panel where the module is installed. Keep the length of the power cable connected to the external power supply terminal to 30m or less.
  • Page 53 (10) Temperature control module Install the DC power in the same control panel with the modules. (11) Flexible high-speed I/O control module Take following measures. • Attach a ferrite core to the cable for the DC power connected to the flexible high-speed I/O control module, and to the cable for the DC power connected to a controller.
  • Page 54 (12) CC-Link module • To ground the Ver.1.10-compatible CC-Link dedicated cable, refer to Section 4.1 (4)(c). • Each power line connecting to the external power supply terminal or module power supply terminal must be 30m or less. • Install a noise filter to the external power supply. Use the noise filter having an attenuation characteristic, MA1206 (TDK Lambda) or equivalent.
  • Page 55 • To supply the module power supply terminal of the AJ65BTB2- 16R/16DR, AJ65SBTB2N-8A/8R/8S/16A/16R/16S with power using the AC/DC power supply, follow as shown below. • Install the AC/DC power supply in the control panel where the module is installed. • Use a CE-marked AC/DC power supply with a reinforced insulation or a double insulation and ground the FG terminals.
  • Page 56 (13) CC-Link/LT module • Use the module under the installation environment of Zone A For the specified Zones of the following products, refer to the manual provided with each product: • CL1Y4-R1B1 • CL1Y4-R1B2 • CL1XY4-DR1B2 • CL1XY8-DR1B2 • CL1PSU-2A •...
  • Page 57 (14) Other measures (a) Ferrite core A ferrite core has the effect of reducing radiated noise in the 30MHz to 100MHz band. It is recommended to attach ferrite cores if shield cables coming out from pulled out of the control panel do not provide sufficient shielding effects.
  • Page 58 (b) Noise filter (power supply line filter) A noise filter is a component which has an effect on conducted noise. Attaching the filter can suppress more noise. (The noise filter has the effect of reducing conducted noise of 10 MHz or less.) The precautions for attaching a noise filter are described below.

  • Page 59: Measures To Comply With The Low Voltage Directive

    (c) Insulation transformer An isolation transformer has an effect on reducing conducted noise (especially, lightning surge). Lightning surge may cause a malfunction of the programmable controller. As measures against lightning surge noise, connect an isolation transformer as shown below. Using an isolation transformer will reduce an impact of lightning.
  • Page 60 (2) Precautions when selecting MELSEC-L series products (a) Power supply module There are dangerous voltages (voltages higher than or equal to 42.4V peak) inside the power supply modules of 100VAC and 200VAC rated input voltages. Therefore, for CE-marked products, insulation is reinforced internally between the primary and secondary circuits.
  • Page 61 (4) Control panel (a) Protection against electric shock The control panel must be handled as shown below to protect a person who does not have adequate knowledge of electricity from an electric shock. • Lock the control panel so that only those who are trained and have acquired enough knowledge of electric facilities can open the control panel.
  • Page 62 (c) Reinforced insulation The reinforced insulation covers the withstand voltages shown below. Rated voltage of hazardous voltage µ Surge withstand voltage (1.2/50 area 150VAC or lower 2500V 300VAC or lower 4000V (Installation Category II, source: IEC 664)

  • Page 63: General Safety Requirements

    5. GENERAL SAFETY REQUIREMENTS When a programmable controller is powered on or off, proper output of the control target may not function temporarily due to delay and startup time differences between the power supply for the programmable controller and the external power supply for the control target (especially in the case of DC).
  • Page 64 Memo...

  • Page 65: Revisions

    IB(NA)-0800496CHN-C Addition of descriptions of LD40PD01 This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.

  • Page 66: Warranty

    WARRANTY Please confirm the following product warranty details before using this product. 1. Gratis Warranty Term and Gratis Warranty Range If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product within the gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service Company.
  • Page 68 20 Waterford Office Park, 189 Witkoppen Road, Avenida Adelino Cardana, 293, 21 andar, Fourways, South Africa Bethaville, Barueri SP, Brazil Tel : +27-11-658-8100 Tel : +55-11-4689-3000 Germany MITSUBISHI ELECTRIC EUROPE B.V. German China MITSUBISHI ELECTRIC AUTOMATION (CHINA) Branch LTD. Mitsubishi-Electric-Platz 1, 40882 Ratingen, No.1386 Hongqiao Road, Mitsubishi Electric...

Table of Contents