Heating / Cooling Lockout Setting
ASU9RLF, ASU9RLF1, ASU9RLS2, ASU9RLS3, ASU9RL2, ASU12RLF, ASU12RLF1, ASU12RLS2, ASU12RL2,
ASU15RLS, ASU15RLS3, ASU18RLB, ASU18RLF, ASU24RLF, ASU24RLB, ASU24RLXB, ASU30RLXB,
ASU30RLX, ASU36RLXB, ARU9RLF, ARU12RLF, ARU18RLF, AUU9RLF, AUU12RLF, AUU18RLF, AGU9RLF,
This new setting for the systems will allow you to lockout a specific mode. Once the function is set, the
wireless remote will still display the locked out mode, but indoor unit will beep twice and all LED lights
will flash to indicate function locked out.
You will find instructions on how to set this function on page 2.
Fixed operation mode switching
Sets the operation mode to heat pump, heating only, or cooling only.
Disclaimer:
In order to perform some of these tests an electrical and/or refrigerant license is required. We strongly advise to check the Service manual for more detailed explanation. If you are not sure about these recommendations please contact us at 866-952-8324.
AGU12RLF, AGU15RLF
Function Number
94
Engineering Bulletin
Applies to models:
Setting Value
Setting Description
00
01
02
© 2015 Fujitsu General America, Inc.
by
(* Factory setting)
Heat pump*
Heating only
Cooling only
# 054
4/23/15