Page 1
SX95E802BE Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
Further information and explanations are available online: Table of contents 1 Safety ........... 4 7 Programmes ...... 18 1.1 General information.... 4 7.1 Information for test institutes ... 19 1.2 Intended use...... 4 7.2 Favourite ...... 19 1.3 Restriction on user group.. 4 8 Additional functions .... 20 1.4 Safe installation ......
Page 3
13.2 Unsuitable detergents ... 28 20.3 Transporting the appliance ... 52 13.3 Information on detergents .. 29 20.4 Disposing of old appliance ... 52 13.4 Adding detergent.... 29 21 Customer Service.... 52 21.1 Product number (E-Nr.), 14 Tableware ........ 30 production number (FD) 14.1 Damage to glass and table- and consecutive numbering ware........
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡...
Page 5
Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- ▶...
en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. Check that there is a distance of at least 5 cm between the ap- ▶...
Page 7
Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic cleaning ▶ agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
en Safety 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured surface. ▶ Never pull on the power cord to unplug the appliance. Always ▶...
Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. With redundant appliances, unplug the power cord. Then cut ▶ through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
en Preventing Modified or damaged water hoses Preventing 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing 2.1 Safe installation Only use the water hoses supplied ▶ with the appliance or genuine ATTENTION! spare hoses.
Childproof lock en So as not to scratch the finish on ▶ 4 Environmental protec- the appliance, do not use sponges with a rough surface or abrasive tion and saving energy cleaning agents. To prevent corrosion, do not use ▶ sponge cloths on dishwashers with 4.1 Disposing of packaging a stainless steel front or rinse such The packaging materials are environ-...
en Installation and connection shortened. Sensor set- Description → "Overview of the basic settings", ting Page 34 SE:00 Optimum setting for a mixed load and heavily soiled table- 5 Installation and con- ware. Saves both en- ergy and water. nection SE:01 Adjusts the pro- To ensure proper operation, connect gramme strength for the appliance to the power and water...
Installation and connection en ance, you must stop it from tipping 5.4 Drinking water connec- over, e.g. by screwing it to the wall or tion installing it under a continuous work- top that is securely connected to ad- Connect your appliance to a drinking jacent cabinets.
en Familiarising yourself with your appliance 6 Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 53. The data you need for Customer Service → Page 52.
Page 15
Familiarising yourself with your appliance en Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 27 Bottom basket Bottom basket → Page 22 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 24 Lower spray arm The lower spray arm washes the table- ware in the bottom basket.
en Familiarising yourself with your appliance 6.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 3 4 5 6 ON/OFF button and reset Switching on the appliance button...
Familiarising yourself with your appliance en Start button Starting the programme → Page 33 Programme buttons and addi- Programmes tional functions → "Programmes", Page 18 Additional functions → "Additional functions", Page 20 Door handle Open the appliance door. → Page 32 Display The display shows information about the remaining running time or the ba- sic settings.
Page 18
en Programmes 7 Programmes You can find an overview of the pro- ted. The running time will change if grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
Programmes en Programme Programme se- quence Tableware: Time-optimised: Mixed tableware and cutlery Cleaning 65 °C ¡ ¡ Speed 65° Level of soiling: Intermediate rinse ¡ Common household food rem- Final rinse 69 °C ¡ ¡ nants lightly dried on ¡ Use only if appliance is unloaded. Machine Care 70 °C Machine Care → "Favourite ", Page 19...
Page 20
en Additional functions 8 Additional functions You can find an overview of the additional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme.
Features en Press in the levers on the right and 9 Features left on the outside of the basket. You can find an overview of the pos- sible features of your appliance and how to use them here. These features depend on the model of your appliance.
en Features 9.2 Knife shelf 9.4 Bottom basket Use the shelf for knives and long Arrange pans and plates in the bot- items of cutlery. tom basket. Cutlery basket 9.3 Etagere Large plates up to a diameter of 34 cm can be arranged in the bottom Use the cutlery shelf and space un- basket as shown.
first time en 9.5 Folding prongs 9.6 Cutlery basket Use the folding prongs to position Arrange cutlery in the cutlery basket, tableware securely, e.g. plates. always without sorting it and with the sharp points downwards. You can fold the prongs down to po- sition pans, bowls and glasses better.
en Water softening system Set the amount of rinse aid to be 11 Water softening sys- dispensed. → Page 27 Add detergent → Page 27. Start the Programme with the Hard water leaves limescale on the highest cleaning temperature tableware as well as the washing without tableware. tank, and parts of the appliance may To remove any marks from water become blocked.
Water softening system en To open the basic settings, press Note: Only use special salt for for 3 seconds. dishwashers. Do not use salt tablets. The display shows H:xx. Do not use table salt. The display shows . Add the special salt to the dis- Press repeatedly until the penser.
en Rinse aid system The water hardness is 0 - 8 °E. ¡ Additional power consump- 0.05 You do not need to use special tion in kWh salt. The consumption values specified Press . are laboratory measurements determ- To open the basic settings, press ined in accordance with the currently for 3 seconds.
Detergent en Add rinse aid up to the max mark. To save the settings, press for 3 seconds. 12.3 Switching the rinse aid system off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off.
en Detergent starch and remove protein. Oxygen- With powder and liquid detergent the based bleaching agents are generally dosage can be individually adjusted used to remove coloured marks, e.g. to the level of soiling of the table- tea or ketchup. ware. For better washing and drying results Note: Follow the manufacturer's in- and to avoid damage to the appli-...
Detergent en Add the detergent to the dry deter- 13.3 Information on deter- gent dispenser. gents Follow the instructions on detergents 50 ml in everyday use. 25 ml Detergents marked as "organic" or ¡ 15 ml "ecological" (environmentally friendly) generally contain lower levels of active agents or com- pletely dispense with certain sub- stances.
en Tableware Close the lid of the detergent dis- 14.1 Damage to glass and penser. tableware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommenda- tion The following...
Tableware en For better washing and drying res- ¡ Cause Recommenda- ults, position items with curves or tion recesses at an angle so water can Highly caustic al- If you are using run off. kaline or highly highly caustic al- acidic cleaning kaline or highly solutions, in par- acidic cleaning...
en operation If the setting "c:01" or "c:02" is ac- tivated, press on the upper middle section of the appliance door twice with a short interval in between. The appliance door will open auto- matically. 15.2 Switching on the appli- ance Press ...
operation en Press the button for the relevant will help prevent excess pressure ▶ additional function. building up in the appliance and stop the appliance door bursting open. → "Additional functions", Page 20 The additional function is set and Open the appliance door carefully. the additional function button Press ...
en Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04 H:00 - H:07 Set the water softening sys-...
Page 35
Basic settings en Basic setting Display text Selection Description EmotionLight EL:01 EL:00 - EL:02 Interior light. With the setting "EL:00"m ¡ the interior light is switched off. With the setting "EL:01", ¡ the interior light can be activated via the ON/OFF button.
Page 36
en Basic settings Basic setting Display text Selection Description Tone volume SL:02 SL:00 -SL:03 Adjustment of tone volume. Level "SL:00" switches the signal tone off. If the Eco drying function is activated, the end of the pro- gramme is not indicated by an audible signal tone.
Page 37
Basic settings en Basic setting Display text Selection Description autoOpen Dry o:02 o:00 - o:02 Activate or deactivate auto- matic opening of the appli- ance door during the drying phase. If the function has been ac- tivated, the running time may increase.
en Home Connect Basic setting Display text Selection Description Remote Start rc:01 rc:00 - rc:02 Activate or deactivate → "Remote Start ", Page 39. The following settings are possible: With the setting "rc:00", ¡ the function is perman- ently deactivated. With the setting "rc:01", ¡...
Home Connect en depends on the availability of Start the Home Connect app and Home Connect services in your coun- set up access for Home Connect. try. You can find information about The Home Connect app guides this at: www.home-connect.com. you through the entire login pro- To be able to use Home Connect, cess.
en Cleaning and servicing Note: Please note that the Requirements The appliance is connected to your Home Connect functions can only be ¡ WLAN home network. utilised with the Home Connect app. The appliance is connected to the Information on data protection can be ¡...
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service.
en Cleaning and servicing Make sure that there are no alu- ¡ 18.5 Filter system minium parts, e.g. extractor hood The filter system removes coarse grease filters or aluminium pans, in soiling from the dishwashing cycle. the interior of the appliance. If you have not run Machine Care ¡...
Cleaning and servicing en Pull down the micro filter to re- Insert the filter system into the ap- move. pliance and turn the coarse filter clockwise. Make sure that the arrow mark- ‒ ings match up. Press the locking catches gether and lift the coarse filter out ...
Page 44
en Cleaning and servicing Pull up the lower spray arm to re- Check the outlet nozzles on the move. spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com. WARNING Risk of electric shock! Incorrect repairs are dangerous.
Page 46
en Troubleshooting Fault Cause and troubleshooting E:32-00 will light up Remove the filter from the supply hose alternately or indicator for water supply lights Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back on. Check the water connection for leaks. Restore the power supply.
Page 47
Troubleshooting en Fault Cause and troubleshooting E:61-03 will light up Not an appliance fault. Siphon connection is still alternately. Water is closed or the wastewater hose is kinked or blocked. not drained. Check the connection to the siphon and open if ne- cessary.
Page 48
en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. ‒ Pull out the mains plug or switch off the fuse in ‒...
Page 49
Troubleshooting en Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly. → "Filter system", Page 42 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. ▶ → "Programmes", Page 18 Adjust the sensitivity of the sensors.
Page 50
en Troubleshooting Fault Cause and troubleshooting Removable streaks Tableware has been precleaned too intensely. The are present on sensors chose a weaker programme. Stubborn soiling glasses, glassware cannot be entirely removed. with a metallic appear- Only remove large remnants of food and do not ▶...
Transportation, storage and disposal en Insert the pump cover and press 19.1 Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
en Customer Service 20.2 Protect appliance from 20.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
Customer Service en Customer Service for a period of at 21.2 AQUA-STOP guarantee least 10 years from the date on In addition to warranty claims against which your appliance was placed on the seller under the purchase agree- the market within the European Eco- ment and in addition to our manufac- nomic Area.
en Technical specifications 22 Technical specifications Weight Max.: 60 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16 A Water pressure min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) ¡ Inlet rate Min. 10 l/min Water temperature Cold water. Hot water max.: 60 °C Capacity 13 place settings You can find more information about...
BSH Hausgeräte GmbH hereby de- A detailed Declaration of Conformity clares that the appliance with Home can be found online at siemens- Connect functionality conforms to the home.bsh-group.com/uk/ among the essential requirements and other rel- additional documents on the product evant provisions of Directive page for your appliance.
Page 56
EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...