Related Manuals for Cadel MITHOS3 PLUS 14 PS
Summary of Contents for Cadel MITHOS3 PLUS 14 PS
- Page 1 USER MANUAL Pellet Stove ©2022 CADEL srl | All rights reserved - Tutti i diritti riservati ATENA PLUS 12/14 - DUKE 12/14 AIRTIGHT- SABA 12/14 MITHOS PLUS 12/14 - MITHOS PLUS 12/14 PS...
-
Page 2: Table Of Contents
8.19 CHIMNEY SWEEP FUNCTION (FOR MAINTENANCE SUMMARY TECHNICIANS ONLY) - SEE SECTION K SETTINGS MENU A 1 MANUAL SIMBOLOGY ........3 PAG. 14 ..............22 2 DEAR CUSTOMER ..........3 9 FUEL ............22 2.1 REVISIONS TO THE PUBLICATION ......4 9.1 FUEL ..............22 2.2 CARE OF THE MANUAL AND HOW TO CONSULT IT ...4 9.2 PELLET SUPPLY .............23 SAFETY REQUIREMENTS ......5 9.3 PELLET REFUELLING TIMER ........23... -
Page 3: Manual Simbology
2014/53/EU (RED - Radio Equipment directive) 2011/65/EU (ROhS) Hereby CADEL S.r.l. declares that the radio equipment type Easy Connect Plus + Navel Stand Alone is in compliance with Directive 2014/53/EU. According to (EU) No. 305/2011 regulation, the " Declaration of Performance" and "Declaration of Conformity" are available online,... -
Page 4: Revisions To The Publication
No part of this manual may be translated into other languages, adapted and/or reproduced, even in part, in other mechanical and/ or electronic form or media, for photocopies, recordings or other, without the prior written authorisation of CADEL S.r.l. The company reserves the right to make changes to the product at any time without prior notice. The owner company reserves its rights according to law. -
Page 5: Safety Requirements
SAFETY REQUIREMENTS • Installation, electrical connection, functional verification and maintenance must only be performed by qualified or authorised personnel. • Live electrical parts: disconnect the product from the 230V power supply before perfor- ming any maintenance operation. Only power the product after completing assembly. •... -
Page 6: Cautions - Warranty Conditions
experience and knowledge must be kept away from packaging. The stove IS NOT a toy. • Childreen must be constantly overseen in order to assure that they do not play with the appliance. • During its running, the stove reaches high temperatures: keep away childreen and animals and for your safety please use appropriate fireproof devices, such as heat-protecting gloves. -
Page 7: Warranty Conditions
WARRANTY CONDITIONS The duration, conditions and limitations of CADEL S.r.l. can be found on the guarantee card enclosed with the device. The company guarantees the product, with the exception of elements subject to normal wear listed below, for a period of 2 (two) years from the date of purchase attested by: •... -
Page 8: Spare Parts
tions and in accordance with the fee in force for the work to be carried out. The user will also be charged for any costs incurred to remedy the incorrect technical interventions, tampering or damage to the appliance, not attributable to original faults. Save for the legal or regulatory limits, the guarantee does not cover the containment of atmospheric and acoustic pollution. -
Page 9: Information For Management Of Electric And
LEGENDA WHERE TO DISPOSE MATERIALS Metal If there is any, to be disposed of separately based on Glass A. OUTER CLADDING the material used: Tiles or ceramics Stone Glass ceramic (fire door): to be disposed of with If there is any, to be disposed of separately based on inert or mixed waste B. -
Page 10: Wifi - Bluetooth Connection
DESCRIPTION CODE MATERIAL SYMBOL DIRECTIONS FOR COLLECTION SORTED waste collection - WOOD BED WOOD WOOD - WOOD CAGE Check with the competent body on FOR 50 - WOOD PALLET how to dispose of this packaging at the recycling depot SORTED waste collection - CARDBOARD BOX PAPER CORRUGATED CARDBOARD... -
Page 11: Navel Stand Alone (Optional)
Fig. 3 - EASY CONNECT PLUS module Fig. 4 - EASY CONNECT PLUS display Fig. 5 - EASY CONNECT PLUS app The documentation for connecting the Wi-Fi and using the App are available online at the following addresses: https://www.cadelsrl.com/donwload-wi-fi/ http://www.free-point.it/it/downloads/ https://www.pegasoheating.com/it/documenti/ (Optional on models: SPARK 11 - INDIGO 11) NAVEL STAND ALONE (OPTIONAL) -
Page 12: Use
Fig. 6 - NAVEL STAND ALONE module Fig. 7 - App EASY CONNECT PLUS The documentation for connecting the Wi-Fi and using the App are available online at the following addresses: https://www.cadelsrl.com/donwload-wi-fi/ http://www.free-point.it/it/downloads/ https://www.pegasoheating.com/it/documenti/ INTRODUCTION To have the best performance with the lowest consumption please follow the here descripted instructions. •... -
Page 13: Control Panel Display
Set values from 1 to 5 are defined by the manufacturer and they can be changed only by an authorized tech- nician. The product will be subject to expansion and contraction during the ignition and cooling stages, therefore slight creaking noises may be heard. This is perfectly normal as the structure is made of laminated steel and must not be considered a defect. -
Page 14: Settings Menu
Sleep setting (see relative chapter) SETTINGS MENU The SETTINGS menu allows to act on the boiler operating mode: a - Language b - Cleaning (displayed only when the boiler is switched off) c - Screw Loading (displayed only when the boiler is switched off) d - Tone e - Ext.Thermostat (activation) f - Auto-Eco (activation) - Page 15 e - Ext.Thermostat (see relative chapter) f - Auto-Eco activation To select the Auto-Eco function act as follows: • Press the “menu” button. • Scroll to “Settings” using the arrows • Press “menu” to confirm. • Scroll to “Auto-Eco activation" using the arrows. •...
-
Page 16: Info Menu
• Press “menu” to confirm. • Select the test to be performed with the + - keys • Press “menu” to confirm and “esc” to exit k - “Chimney Sweep Function" To activate the “Chimney Sweep Function” function act as follows: •... -
Page 17: Switch Off (On Panel: Off With Flashing Flame)
the stove during ignition stage if dense white smoke is present. If after some months the flame appears weak and/or orange colored or the glass tends to blackens and the burning pot to become encrusted, clean the stove, clean the fume conduit and the chimney flue. ATTENTION! Make sure pellets and ash have not accumulated in the brazier due to failed ignition. -
Page 18: Programmed Mode (Timer) - Main Menu
Fig. 14 - Display Fig. 15 - Display Fig. 16 - Display With function “1” or "2" or "3" or "4" or "5" the fan is forced to work at the selected output. (For example: by setting “3”, even if the fan is set to heat output 5 it will work as if set to heat output “3”, etc.). -
Page 19: Programming Examples
At this point it will propose 00:00 as starting time, with key + - adjust the starting time and press the “menu” key to confirm. The next step proposes a shutdown time of 10 minutes above that set for start-up: press the + key and adjust the shutdown time, confirm with the “menu”... -
Page 20: Sleep Function (Main Menu)
• Room probe -1°C or external thermostat with closed contact (for at least 20" to avoid false recalls). • After 5 minutes from the beginning of the switch-off procedure. 8.15 SLEEP FUNCTION (MAIN MENU) The sleep function is activated only when the boiler is switched on and allows to quickly set a time at which the product must switch off. -
Page 21: Pellets Recipe
Fig. 23 - Ensemble d'exemples LEGENDA Fig. 23 Smoke Outlet Combustion Air Intake Inspection cap 8.17 PELLETS RECIPE (SEE SECTION H SETTINGS MENU A PAG. 14) Changes to be made with the support of the authorised technician. Activates only with the Easy Set function disabled, "SET: 0" ! This function is for adapting the stove to the pellets that are being used. -
Page 22: Chimney Sweep Function
forming at the bottom of the brazier itself caused by poor quality fuel or fuel that produces a lot of ashes. The values available are from -27% to +27% with variations of 3 points at a time. The variation in negative can be used in case the flame is too low. 8.19 CHIMNEY SWEEP FUNCTION (FOR MAINTENANCE TECHNICIANS ONLY) - SEE SECTION K SET- TINGS MENU A PAG. -
Page 23: Pellet Supply
PELLET SUPPLY Fig. 24 - Wrong opening of the pellets bag Fig. 25 - Right opening of the pellets bag It is necessary to avoid to fill the hopper with the pellet when the stove is running. • Do not get the bag of pellet in contact with hot stove surfaces. •... -
Page 24: Remote Control (Optional)
Fig. 29 - Do not cover air slits REMOTE CONTROL (OPTIONAL) • The stove can be operated through a remote control (optional) • Operation requires 1 CR 2025 (3Volt) Lithium battery • Operating temperature 0 °C / 50 °C • 38 khz infrared signal Used batteries contain metals which are harmful for the environment;... -
Page 25: Smoke Temperature Probe
• open fire door or worn/broken gaskets. • see SMOKE RPM VARIATION User Manual 12.2 SMOKE TEMPERATURE PROBE Detects the temperature of the smoke, thereby enabling start-up or stopping the product when the temperature drops below the preset value. 12.3 CONTACT THERMOSTAT IN THE FUEL HOPPER If the temperature exceeds the preset safety level, it immediately shuts down boiler operation. -
Page 26: Alarm Reset
PANEL ALERT TYPE OF PROBLEM SOLUTION Wait for the cooling stage to end, cancel the alarm and restart the boiler setting the fuel loading at minimum The temperature of the pellets hopper or the (SETTINGS menu - Pellet Recipe). A03 Thermostat water temperature exceed the envisioned safety Check that dust does not clog the aeration grid on the stove alarms... -
Page 27: Burning Pot And Ash Tray Cleaning
For the brazier to be cleaned properly, remove it from its housing completely and thoroughly clean all the holes and the grate on the bottom. If good quality pellets are used, you will normally only need to use a brush to restore the optimal operating conditions of the component. -
Page 28: Hopper Cleaning
13.4 HOPPER CLEANING Fig. 37 - Hopper cleaning Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper bottom. If present, they must be removed with the aid of a vacuum cleaner (see Fig. 37 ). 13.5 FUME PIPES ANNUAL CLEANING Clean annually from soot with brushes. -
Page 29: Checking The Inner Components
inside the combustion chamber with the special silicone spray paints (available at any store or Technical Assistance Centre) during the necessary annual end of season scheduled maintenance operations. This way the paint will protect the inner parts of the com- bustion chamber, blocking any type of oxidative process. - Page 30 PROBLEM CAUSE SOLUTION INTERVENTION The stove is without Check if the plug is connected. power supply Burned protection fuse in the electric Replace the protection fuses in the electric socket (3.15A-250V). socket The control display Faulty control Replace the control display. does not switch on display Faulty flat cable...
- Page 31 PROBLEM CAUSE SOLUTION INTERVENTION Check as following: probable obstructions of the combustible air Not sufficient com- inlet from the back or from the bottom of the stove; burning pot bustion air obstructed holes with too ash remains. Have the fan blades and auger cleaned.
-
Page 32: Technical Documentation For Local Space Heaters According To Commission Regulations (Eu) 2015/1185 - (Eu) 2015/1186 (Product Fiche)
TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: ATENA3 PLUS 12 - MITHOS3 PLUS 12... - Page 33 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: ATENA3 PLUS 14 - MITHOS3 PLUS 14...
- Page 34 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: MITHOS PLUS 12 PS...
- Page 35 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: MITHOS PLUS 14 PS...
- Page 36 Rev. 00 - 2022 CADEL srl www.cadelsrl.com 31025 S. Lucia di Piave - TV www.free-point.it Via Foresto sud, 7 - Italy www.pegasoheating.com Tel. +39.0438.738669 Fax +39.0438.73343...