Page 3
1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally.
Page 4
2. Appropriate tools Select the Appropriate tools for disassembly and re-assembly. Phillips screwdriver (#2) spacer screwdriver C/D disassembly tool Gloves or soft cloth...
Page 5
3. Disassembly SOP Put the monitor on a flat surface (Put the EPE on under the monitor) Remove the screw * 4pcs Tool : Screwdriver #2 Pull out stand...
Page 6
Use the C/D disassembly tool to release Rear cover hook from disassemble hole on bottom Disassemble the back cover, take out the speaker cable at the side of the isolation cover, and take down the back cover Remove the middle frame screws Tool : Screwdriver #2...
Page 7
Remove the key board Take out the screws of the isolation cover Remove the lamp wire and FFC wire Remove the black Mylar from the power board...
Page 8
Remove the main board and power board screws Take out the main board and power board...