hit counter script
Sony PXW-X400KF Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. PXW-X400KF
  6. Operating instructions manual
Sony PXW-X400KF Operating Instructions Manual

Sony PXW-X400KF Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-X400KF:
Table of Contents

Advertisement

Quick Links

4-587-873-14 (1)
GB
Solid-State Memory Camcorder
Operating Instructions
PXW-X400 / PXW-X400KC / PXW-X400KF
Software Version 3.1
© 2015 Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony PXW-X400KF

Summary of Contents for Sony PXW-X400KF

  • Page 1 4-587-873-14 (1) Solid-State Memory Camcorder Operating Instructions PXW-X400 / PXW-X400KC / PXW-X400KF Software Version 3.1 © 2015 Sony Corporation...

  • Page 2: Table Of Contents

    000 2 Table of Contents 1. Overview 5. Network Configuration 9. Connecting External Devices Name and Function of Parts ..........3 Network Functions Supported by the Camcorder...58 Connecting a Remote Control Unit ........123 Screen Display ..............13 Connecting Devices using Wireless LAN ......59 Connecting an External Monitor ........125 Connecting to the Internet ..........63 Managing/Editing Clips with a Computer ....126...

  • Page 3: Overview

    AC power supply. “Preparing a Power Supply” (page 22) [Note] For your safety, and to ensure proper operation of the camcorder, Sony recommends the use of the BP-FLX75 Battery Pack. Camera adaptor connector Enables connection of a CA-TX70/FB70 HD Camera Adaptor.
  • Page 4 1. Overview: Name and Function of Parts this connector, power off the camcorder first. Accessory Attachments Controls Near the Lens Lens mount securing rubber After locking the lens in position using the lens locking lever, fit this rubber over the lower of the two projections.
  • Page 5 1. Overview: Name and Function of Parts [Note] AUTO W/B BAL (automatic white/black LCD Monitor Side (1) If Flash Band Reduce is On, setting the SHUTTER switch balance adjustment) switch to ON turns off the Flash Band Reduce function and the Activates the automatic white/black balance FBR indicator disappears from the viewfinder screen.
  • Page 6 1. Overview: Name and Function of Parts ASSIGN. (assignable) 1/2/3 switches MONITOR (audio monitor selection) switches OUTPUT/DCC (output signal/dynamic Examples: ˎ When a single color dominates the subject, such as sky, ˎ You can assign a function using Operation By means of combinations of the two switches, contrast control) switch sea, ground, or flowers.
  • Page 7 1. Overview: Name and Function of Parts this switch up to this position again resets the Built-in speaker LCD Monitor Side (2) settings to the initial value. The speaker can be used to monitor E-E sound ESCAPE: Use this switch when the menu page, during recording, and playback sound during which has a hierarchical structure, is opened.
  • Page 8 1. Overview: Name and Function of Parts PLAY/PAUSE button and indicator Display indication Description Switch settings RESET/RETURN button Press this button to view playback video images operation Video without Only the video appears. using the viewfinder screen or the LCD monitor. superimposed DISPLAY switch: Reset user bits data...
  • Page 9 1. Overview: Name and Function of Parts Thumbnail screen operations section and audio control section ESSENCE MARK button AUDIO IN CH1/CH2/CH3/CH4 (audio channel By pressing this button when a thumbnail display 1/2/3/4 input selection) switches is on the screen, you can view the following Select the audio input signals to be recorded on thumbnail displays of the essence-marked frames audio channels 1, 2, 3 and 4.
  • Page 10 1. Overview: Name and Function of Parts “Obtaining Location Information (GPS)” (page 57) Network connector Handle and Memory Card Slot Side Connects to a network via a wired LAN connection [Note] using a LAN cable (sold separately). Do not grasp this part of the camcorder when the GPS function is in use.
  • Page 11 1. Overview: Name and Function of Parts TC OUT (timecode output) connector (BNC TALLY (back tally) indicator (red) Tally Indicator and Connector Section type) Lights up during recording. It will not light if the To lock the timecode of an external VTR to TALLY switch is set to OFF.
  • Page 12 1. Overview: Name and Function of Parts AUDIO IN CH-1/CH-2 (audio channel 1 and channel 2 input) connectors (XLR type, 3-pin, female) Connect to audio equipment or a microphone. Bottom cover This is provided for protecting the cables connected to the connectors on the rear panel. By loosening the screws which retain the cover to the bottom of the camcorder, you can adjust the position of the cover depending on the size and...

  • Page 13: Screen Display

    1. Overview Screen Display Clip name display When no menu is displayed, push the MENU Information Screen Displays the name of the clip currently recording CANCEL/PRST/ESCAPE switch up to the CANCEL/ when recording, or displays the name of the next PRST position to display the status screen.
  • Page 14 1. Overview: Screen Display Display item Description Display item Description Number Clip name suffix NW Client Network client mode status Mode Status For details about the status, see Gamma Gamma category in use “Network client mode status” (page 14). Proxy Proxy data recording function on/ CCM Name Name of the connected CCM...
  • Page 15 1. Overview: Screen Display Status State Description Status State Description Display item Description display display Supplied Supplied power source voltage Connecting Connecting to Attempting to Cert. not The CCM certificate Voltage connect to CCM (or Valid certification not is not valid. The date (disconnected) disconnecting).
  • Page 16 1. Overview: Screen Display and playback with camcorder information Focus position indicator (with lens mounted) Viewfinder Screen Indicator Meaning superimposed on the display. Displays the focus position as a distance to the CALL Call received from external You can toggle the display of information on/off subject (unit: meters).
  • Page 17 1. Overview: Screen Display Wired LAN connection status The following icons are displayed when streaming Battery type Indicator Menu settings Indicator Displays the wired LAN network setting and from a CCM. Operation Paint >Gamma setting Info battery Battery remaining capacity connection status using icons.
  • Page 18 1. Overview: Screen Display Time data display State Icon Icon Media state during proxy file transfer. When transfer finishes, Displays the remaining recording/playback Operation Maintenance Network disappears to indicate 100% transfer. – Media not inserted or not mounted >Display >Network connection time, timecode, user bits, etc., as selected by the On/Off...
  • Page 19 1. Overview: Screen Display 5600K: Appears when an assignable switch Lens Supplied with the PXW-X400KC Icon Meaning assigned with Color Temp SW 5600K is on Spotlight mode 6300K: Appears when an assignable switch assigned with Color Temp SW 6300K is on The PXW-X400KC is supplied with a lens.
  • Page 20 The zoom rapidly returns to the previous zoom position when the Shtl (shuttle) switch is Zoom lever / zoom ring The PXW-X400KF is supplied with a lens. For manual zoom adjustment, set the zoom servo/ released. manual switch to the MANU position, then operate the lever/ring.
  • Page 21 1. Overview: Screen Display operates, minimizing the amount of turning – When shooting point light sources, under Tally indicator Viewfinder required for focusing. street lighting or at night Lights up when recording is started by a press of When you slide the focus ring back (toward the –...

  • Page 22: Preparation

    000 22 2. Preparation Preparing a Power Supply For safety, use only the Sony battery packs and AC For details on the battery charging procedure, refer to the battery charger operation manual. adaptors listed below. ˎ BP-FLX75 Lithium-ion Battery Pack ˎ...

  • Page 23: Attaching A Viewfinder

    This section describes the viewfinder supplied with To restore the normal display, set the MIRROR Viewfinder left-to-right Couple the viewfinder connector to the VF the PXW-X400KC/PXW-X400KF models. switch on the rear panel of the viewfinder to B/T. positioning ring connector (26-pin).
  • Page 24 2. Preparation: Attaching a Viewfinder Detaching the Viewfinder Barrel Reversing the Display (image/text indication) Horizontally Hex socket bolts Push the clip on the bottom to release. By setting the MIRROR switch on the rear panel of the viewfinder to L/R, you can reverse the picture Flip up the viewfinder barrel.

  • Page 25: Using The Camcorder For The First Time

    2. Preparation Using the Camcorder for the First Time When using the camcorder for the first time, Turn the MENU knob to set the year, month, or configure the following settings in the menu. day, and then press the knob. For details about menu operations, see “Basic Setup Menu Operations”...

  • Page 26: Mounting And Adjusting The Lens

    Approx. 3 m (10 ft.) This section describes how to attach the lens supplied with the PXW-X400KF supplied with the PXW-X400KF as an example. Push the lens locking lever up and remove the With an auto focus lens, zoom and focus lens mount cap from the lens mount.
  • Page 27 2. Preparation: Mounting and Adjusting the Lens Adjusting the flange focal length on manual lenses other than the PXW-X400KC/PXW-X400KF Set the iris to manual. Place the supplied flange focal length adjustment chart about 3m (10 ft) in front of the camera.

  • Page 28: Preparing The Audio Input System

    IN Connector >Rear XLR Auto in the setup menu. Plug the microphone cable into the MIC IN To use a Sony wireless microphone system, power connector, then set the AUDIO IN switch for the camcorder off and then attach a wireless...

  • Page 29: Attaching And Adjusting Peripheral Devices

    2. Preparation Attaching and Adjusting Peripheral Devices [Note] Mounting on a Tripod Attaching the Shoulder Strap The tripod adaptor pin may remain in the engaged position even after the camcorder is removed. If this happens, press the red button and move the lever as shown above until the pin returns to the stowed position.

  • Page 30: Handling Sxs Memory Cards

    SxS memory cards insert the card. Open the cover, and then press the EJECT Use Sony SxS memory cards (SxS PRO+, SxS PRO, The ACCESS indicator lights in orange, and [Note] or SxS-1) with this camcorder.
  • Page 31 2. Preparation: Handling SxS Memory Cards [Note] If formatting fails (page 15). If restoration fails The SLOT SELECT button is disabled during playback. The [Note] memory cards are not switched even if you press the button. A format operation may fail because the SxS ˎ...

  • Page 32: Handling Sd Cards For Saving Configuration Data

    2. Preparation Handling SD Cards for Saving Configuration Data The following SD cards can be used for saving Checking the Remaining Capacity configuration data. SDHC memory cards* (Speed Class: 4 to 10, non- You can check the remaining capacity on an SD UHS, Capacity: 4 to 32 GB) card on the Media Status screen (page 15).

  • Page 33: Using A Media Adaptor

    XQD memory card. If an unformatted SDXC card or an SDXC card XQD is a registered trademark of Sony ˎ Slow motion recording using the Slow & Quick Motion ˎ that was formatted in a different specification is recording function cannot be used with an XQD memory Corporation.

  • Page 34: Settings And Adjustments

    000 34 3. Settings and Adjustments Format Settings You can set the file system, system frequency, and video format using Operation >Format in the setup Switching the Video Format menu. For details about menu operations, see “Basic Setup Menu Operations” (page 86). Refer to “Video Formats”...
  • Page 35 3. Settings and Adjustments: Format Settings System frequency Video format Picture size Operation menu (Operation >Format >Rec Format in setup menu) Format Input/Output 29.97/25/23.98 XAVC-I 1920×1080P 1920×1080 Frequency Rec Format (codec omitted) Output Format XAVC-L 50 1920×1080P HDMI XAVC-L 35 1080P 23.98 1920×1080P 1920×1080PsF...
  • Page 36 3. Settings and Adjustments: Format Settings VIDEO Connector Output Formats Operation menu VIDEO OUT signal format Format Frequency Rec Format (codec omitted) Proxy recording/Wireless LAN connection function The signals that can be output from the VIDEO connector are shown in the following table according to the Operation >Format setting in the setup menu.

  • Page 37: Adjusting The Black Balance And White Balance

    3. Settings and Adjustments Adjusting the Black Balance and White Balance To ensure excellent image quality when using this Iris adjusted using auto iris: Set the automatic/ Adjusting the White Balance Push the AUTO W/B BAL switch to BLACK and camcorder, conditions may require that both the manual switch on the lens to automatic.
  • Page 38 3. Settings and Adjustments: Adjusting the Black Balance and White Balance Error message Meaning To assign an electrical CC filter to FILTER knob Assign the electrical CC filter switching NG: Color Temp. The color temperature of the position number 1, select [ND FLT C. function (ELECTRICAL CC) to an assignable subject lighting is too low, and Temp<1>].

  • Page 39: Setting The Electronic Shutter

    3. Settings and Adjustments Setting the Electronic Shutter ECS (Extended Clear Scan) mode ˎ The selectable shutter speeds vary depending on the ˎ Setting the shutter speed (ECS mode) Shutter Modes current system frequency. Select this mode for obtaining images with no Switching between Speed mode and Angle mode Set the shutter mode to ECS (see the previous horizontal bands of noise when shooting subjects...

  • Page 40: Setting Auto Iris

    3. Settings and Adjustments Setting Auto Iris The reference value for automatic iris adjustment Convergence Description Turn the MENU knob to change the reference can be changed to aid the shooting of clear level value. pictures of back-lit subjects, or to prevent blown- –99 Sets the iris 2 f-stops or more The shaded parts indicate the area...
  • Page 41 3. Settings and Adjustments: Setting Auto Iris Adjusting the Iris Gain on the Lens Supplied with the PXW-X400KC Set the iris mode switch to the A (auto) position. Flip off the rubber cap of the iris gain adjustment trimmer. Turn the iris gain adjustment trimmer using a screwdriver, or similar object, to adjust the gain.

  • Page 42: Adjusting The Focus

    Adjusting the Focus This section describes the focus adjustment when One-push Auto Focus using the lens supplied with the PXW-X400KF. [Note] The lens is designed with an extra margin at the infinity Press the PUSH AF button. The auto focus activates position (∞), to compensate for focus drifting due to...

  • Page 43: Adjusting The Audio Level

    3. Settings and Adjustments Adjusting the Audio Level When you set the AUDIO SELECT switch to AUTO, [Note] Manually Adjusting the Audio Level Set the AUDIO SELECT switch(es) When you have operation of the MIC LEVEL knob and LEVEL the input levels of analog audio signals recorded corresponding to the channel(s) selected in (CH1/CH2) knobs linked together, if the LEVEL (CH1/CH2) of the MIC IN Connector...
  • Page 44 3. Settings and Adjustments: Adjusting the Audio Level Setting Knob Front+Side3 LEVEL (CH3) knob and MIC LEVEL knob (linked operation) Audio CH4 Level: Channel 4 recording level Setting Knob Side4 LEVEL (CH4) knob Front MIC LEVEL knob Front+Side4 LEVEL (CH4) knob and MIC LEVEL knob (linked operation) You can now adjust the levels of audio channels 3 and 4 with the knobs selected here.

  • Page 45: Setting Time Data

    3. Settings and Adjustments Setting Time Data To make the timecode consecutive To reset the value to 00 00 00 00, press the Setting the Timecode RESET/RETURN button. When the F-RUN/SET/R-RUN switch is set to R-RUN, recording a number of scenes on the The timecode setting range is from 00:00:00:00 to Set the F-RUN/SET/R-RUN switch to F-RUN or media normally produces consecutive timecode.
  • Page 46 3. Settings and Adjustments: Setting Time Data timecode generator with the external timecode. Once about ten seconds have elapsed after the timecode locks, the external lock state is maintained even if the external timecode source is disconnected. To release the external synchronization, first stop the external timecode input, then set the F-RUN/SET/R-RUN switch to R-RUN.

  • Page 47: Shooting

    000 47 4. Shooting Basic Operations This section explains the basic shooting and the button to play the clip from that point at Playing Recorded Clips Do one of the following to start recording. recording procedures. normal speed. The clip is played to the end, –...
  • Page 48 4. Shooting: Basic Operations Switching between memory cards When two memory cards are loaded, press the SLOT SELECT button (page 30) to select the active slot. It is not possible to switch between memory cards during playback.

  • Page 49: Advanced Operations

    4. Shooting Advanced Operations Device operation when recording in picture cache Recording Shot Marks Recording Retroactive Images Select Operation >Rec Function > Cache Rec mode Time in the setup menu. (Picture Cache Rec Function) On this camcorder, two types of shot marks are The recording procedure is essentially the same, Turn the MENU knob to select the picture available.
  • Page 50 4. Shooting: Advanced Operations during recording, the video and audio data allows you to record pictures under stable light [Notes] [Note] ˎ If you want to turn the video light on before the start ˎ Restarting the camcorder automatically releases Interval Rec stored in memory is erased, and images up till and color temperature conditions.
  • Page 51 4. Shooting: Advanced Operations When you finish making these settings, the system ˎ Audio cannot be recorded when the recording ˎ Recording System S&Q frame rate Turn the MENU knob to select [On], then press frequency and the frame rate appear at the top of and playback frame rates differ.
  • Page 52 4. Shooting: Advanced Operations Canceling Clip Continuous Rec mode Operation >Format Operation >Format Shoot as described in “Basic Operations” >Rec Format in the >Frequency in the setup (page 47). With the camcorder in recording standby mode, setup menu menu [Notes] set Operation >Rec Function >Clip Continuous XAVC-L 50 59.94/50/29.97/25/23.98...

  • Page 53: Proxy Data

    4. Shooting Proxy Data Proxy data is made up of low-resolution video data To turn off the proxy recording/wireless LAN Select Operation >Format Media >SD Turn the MENU knob to select [On], then press (H.264) and audio data (AAC-LC). This lightweight connection function, make the following Card(Proxy) in the setup menu.
  • Page 54 ˎ Location information and a Log file are recorded ˎ simultaneously if the GPS function is enabled. The Log file is saved in “Root/PRIVATE/SONY/ GPS.” Canceling proxy data recording Set Operation >Proxy Recording Mode >Setting in the setup menu to Off.

  • Page 55: Planning Metadata

    Name of person who Planning metadata files are stored in the modifiedBy="Chris"> viewfinder modified the file <Title usAscii="Typhoon" “General/Sony/Planning” directory. ˎ A UTF-8 format name that is actually registered ˎ Title Title1 specified in file (ASCII xml:lang="en">Typhoon_Strikes_Tokyo as the clip name format clip name) </Title>...
  • Page 56 LCD UTF-8"?> monitor and on the viewfinder screen. <PlanningMetadata xmlns="http:// To display ASCII format names: xmlns.sony.net/pro/metadata/ Select Title1(ASCII). planningmetadata" assignId=" The clip name becomes “Typhoon_Strikes_ H00123" creationDate=" Tokyo_SerialNumber”, but “Typhoon_ 2016-11-30T08:00:00Z"...

  • Page 57: Obtaining Location Information (Gps)

    4. Shooting Obtaining Location Information (GPS) Location and time information of video shot Positioning A weak GPS signal is when positioning is enabled is recorded by the being received. camcorder. A GPS signal is being The GPS function is set to Off by factory default. received.

  • Page 58: Network Configuration

     (page 68) Connecting to the Internet using a LAN cable  (page 63)  (page 77) High-quality streaming using a Sony Network RX Station Connect the camcorder to the Internet via a router Connect the modem. using the network connector.

  • Page 59: Connecting Devices Using Wireless Lan

    Playback may not be supported, depending on the removing the IFU-WLM3. [Notes] operating system of the terminal device used and the ˎ For attachment of the guard, contact a Sony service ˎ ˎ Proxy files (low-resolution files) recorded on the SD card in ˎ...
  • Page 60 Devices that support NFC can be connected by one touch using NFC. Select [Settings] on the device and enable the [NFC] function. Open the cover of the USB wireless LAN module connector. For attachment of the guard, contact a Sony service representative.
  • Page 61 5. Network Configuration: Connecting Devices using Wireless LAN Connecting using WPS-equipped devices [Note] Turn the camcorder on, and set Maintenance It may take some time (30 seconds to 90 seconds) to enable Computer Smartphone/ >Network >Wireless Network to Wi-Fi Access access point mode.
  • Page 62 5. Network Configuration: Connecting Devices using Wireless LAN [Note] It may take some time (30 seconds to 1 minute) to enable station mode. Wait until the network indicator (page 17) signal strength icon stops flashing on the LCD monitor or in the viewfinder.

  • Page 63: Connecting To The Internet

    ˎ ˎ A wired LAN connection is not possible if a modem ˎ network connection, contact your Sony dealer or a Sony (option) is attached to the USB wireless LAN module service representative. connector. For wired LAN connection, first remove the modem (option).
  • Page 64 ˎ USB extension adaptor. module connector. removing the CBK-NA1 and modem. For attachment of the guard, contact a Sony ˎ It may take some time (30 seconds to 1 minute) to enable ˎ Fixing screw You can connect the camcorder to the Internet via modem mode.
  • Page 65 5. Network Configuration: Connecting to the Internet Smartphone/ Computer Tablet Access point Internet Smartphone/ Tablet Internet If the access point and device supports WPS, connect using the procedure in “Connecting to an access point using WPS” (page 61). If WPS is not supported, connect using the procedure in “Connecting to an access point in station mode without using WPS”...

  • Page 66: Transferring Files

    Enter the directory on editor is displayed in the Job List. the destination server, as required. ˎ When transferring, a General/Sony/tmp folder is created ˎ Tap [Transfer]. You can select proxy files on an SD card or original automatically on the SD card.
  • Page 67 5. Network Configuration: Transferring Files When the transfer of all files is completed, Monitoring the File Transfer transfer mode is automatically released, and the display returns to the camera shooting screen. Tap [Job List] on the SD Card, Slot A, or Slot B If Maintenance >File Transfer >Remote File screen to display the Job List screen to check the Transfer in the setup menu is set to Enable...

  • Page 68: Transmitting Streaming Video And Audio

    5. Network Configuration Transmitting Streaming Video and Audio You can transmit the video and audio captured/ [Notes] ˎ Streaming cannot be started under the following menu ˎ played back with the camcorder via the Internet or settings. local network. – When Maintenance >Network >Setting in the setup menu is set to Off –...

  • Page 69: Streaming High Quality Video

    ˎ To transfer original files: ˎ >Setting in the setup menu to On. XDCAM air is a cloud service provided by Sony. A Follow steps 1 to 6 in “Transferring original Network client mode is enabled, and the separate contract is required to use this service. For files on SxS memory cards”...

  • Page 70: Using Wi-Fi Remote Control

    5. Network Configuration Using Wi-Fi Remote Control You can access the Wi-Fi remote control built into using [Cam Remote Control] (page 72) from Cursor screen Wi-Fi Remote Screen (Smartphones) the camcorder from a smartphone, tablet, or other the web menu. device over a wireless LAN connection.
  • Page 71 5. Network Configuration: Using Wi-Fi Remote Control Cursor screen Wi-Fi Remote Screen (Tablets) Main screen ˎ Status display ˎ ˎ Cursor control buttons, menu/status display ˎ Up, Left, Set, Right, Down, Cancel/Back, Menu, Status, Thumbnail, Option (SHIFT + SET) Assign screen ˎ...

  • Page 72: Configuring From The Web Menu

    5. Network Configuration Configuring from the Web Menu The web menu of the camcorder appears when The menu has the following items: Settings, Media [Note] Playback may not be supported, depending on the the camcorder is accessed from a browser Info, Job List, and Cam Remote Control.
  • Page 73 5. Network Configuration: Configuring from the Web Menu Streaming settings Proxy Format Settings Item Description Setting Item Description Setting Destination Enter the port 1 to 65535 Proxy File Sets the audio Ch-1 & Ch-2/ Port number of the recording channel to record Ch-3 &...
  • Page 74 5. Network Configuration: Configuring from the Web Menu Configure settings to match the settings of the Station mode Item Description Item Description access point connection. DHCP Enables/disables DHCP. DNS Auto Obtains DNS address When set to [On], an IP address automatically.
  • Page 75 Tapping [Cancel] discards the settings. Total Progress status of the transfer should be written to the root ˎ A subscription is required in order to use the “Sony Ci” ˎ of all files directory of the SD card with...
  • Page 76 5. Network Configuration: Configuring from the Web Menu ˎ Abort selected: Stop file transfer. ˎ ˎ Delete from list: Delete the file from the ˎ transfer list. ˎ Start selected: Start file transfer. ˎ ˎ Select All: Select all files in the list. ˎ...

  • Page 77: Supported Network Functions And Operating

    5. Network Configuration Supported Network Functions and Operating Limitations Network Functions and Network Connection Settings Limitations on Simultaneous Use of Network Functions The supported network functions and corresponding network connection settings (Maintenance The following limitations apply to the simultaneous use of network functions. >Network >Wireless Network and Wired LAN settings) are shown below.

  • Page 78: Clip Operations

    000 78 6. Clip Operations Clip Operations on the Thumbnail Screen Thumbnail Screen Cursor (yellow) OK S The thumbnail screen appears if you press the Thumbnail (index picture) Recording video format Icon Meaning THUMBNAIL button in E-E or playback mode. When a clip is recorded, its first frame is automatically S, OK, NG, KP Essence mark or clip flag attached...
  • Page 79 6. Clip Operations: Clip Operations on the Thumbnail Screen When playback of the last clip finishes, the Selecting Clips Returning to the Start of the Jumping to the Last Clip camcorder switches to the camera image or Current Clip external input state. Press the THUMBNAIL button to return to the To select a clip thumbnail, do one of the following Simultaneously press the F FWD and NEXT...
  • Page 80 6. Clip Operations: Clip Operations on the Thumbnail Screen ABCD0005(3)ABCD0005(4) Protecting Clips Press the THUMBNAIL button. Turn the MENU knob to select [Execute], then ˎ If the parenthetical numbers (1) to (999) already ˎ The thumbnail screen appears. press the knob. exist at the copy destination, because a clip All clips are protected, and a completion has been copied more than 1000 times, it is...
  • Page 81 6. Clip Operations: Clip Operations on the Thumbnail Screen memory card at the same time to another SxS appears. Displaying Clip Properties memory card. Press the MENU knob to dismiss the message. Select Thumbnail >Copy Clip >All Clips in the The clip properties screen for the selected clip appears when you select Thumbnail >Display Clip setup menu.
  • Page 82 6. Clip Operations: Clip Operations on the Thumbnail Screen The clip screen appears showing the clips Deleting a shot mark Setting Added clip flag Setting Description filtered by the selected clip flag. This screen is Add OK All frames with added essence referred to as the filtered clip screen.

  • Page 83: Thumbnail Menu

    6. Clip Operations Thumbnail Menu Default values are shown underlined and in bold text. Item Sub-item setting Description Item Sub-item setting Description Filter Clips Filters the display of clips by OK flags Filters the display of clips (page 82). Display Clip Properties –...

  • Page 84: Menu Display And Settings

    000 84 7. Menu Display and Settings Setup Menu Organization On this camcorder, settings for shooting and Menu Structure Menu Items Item Description Page playback are made in the setup menu, which Planning Planning metadata appears in the viewfinder. Metadata settings The setup menu can also be displayed on an User menu...
  • Page 85 7. Menu Display and Settings: Setup Menu Organization Item Description Item Description Page Page Noise Noise suppression Language Display language Suppression settings settings Hours Meter Digital time counter settings Maintenance menu Network Reset Network reset Fan Control Fan control settings Item Description Page...

  • Page 86: Basic Setup Menu Operations

    7. Menu Display and Settings Basic Setup Menu Operations ˎ The menu item selection area displays a ˎ Displaying the Setup Menu Entering Text Turn the MENU knob, or press the  or  maximum of seven lines. You can scroll button, to move the cursor to the sub-item through menus with more than seven lines that you want to set, and then confirm by...
  • Page 87 Enter an arbitrary passcode number. passcode nearby, just in case it is forgotten. If you Transfer >Auto The valid input range is 0000 to 9999. The do forget the passcode number, contact your Sony Upload(Proxy) default value is 0000. service representative.

  • Page 88: Editing The User Menu

    7. Menu Display and Settings Editing the User Menu You can edit the User menu, such as adding items, Adding Items and Sub-Items Turn the MENU knob to select an item to edit, deleting items, and rearranging items, to make the then press the knob.
  • Page 89 7. Menu Display and Settings: Editing the User Menu Turn the MENU knob to move the triangle and line to the desired destination, then press the knob. The item is moved. Restoring the User Menu to Factory Default State Turn the MENU knob to select Edit User Menu >Customize Reset, then press the knob.

  • Page 90: Menu List

    7. Menu Display and Settings Menu List User Menu (Factory Default Configuration) Operation >Format Sets the system frequency, file system, recording format, and recording aspect ratio. Item Setting Description The User menu consists of the following items when it is in the factory default state. Rec Format Settings vary according to the Selects the recording format (execute by selecting...
  • Page 91 7. Menu Display and Settings: Menu List Operation >Format Media Operation >Input/Output Formats the media. Sets input/output signals. Item Setting Description Item Setting Description Media (A) Execute/Cancel Initializes the SxS memory card in slot A (execute Wide ID Through/Auto Selects whether to add a wide ID signal to the SD by selecting Execute).
  • Page 92 7. Menu Display and Settings: Menu List Operation >Rec Function Operation >Rec Function Sets the special recording mode. Sets the special recording mode. Item Setting Description Item Setting Description Slow & Quick Motion On/Off Turns Slow & Quick Motion on/off. (When set to Number of Frames The available settings vary When Interval Rec is set to On, this sets the...
  • Page 93 7. Menu Display and Settings: Menu List Operation >Assignable Switch Operation >Marker Assigns functions to assignable switches. Sets the marker display in the viewfinder. Item Setting Description For details about assigning functions, see “Assigning Functions to Assignable Switches” (page 113). Item Setting Description...
  • Page 94 7. Menu Display and Settings: Menu List Operation >Gain Switch Operation >Auto Iris Sets the gain value switch settings. Sets the auto iris. Item Setting Description Item Setting Description Gain<L> –3dB/0dB/3dB/6dB/9dB/12dB/1 Selects the gain value for the L position of the Iris APL Ratio –99 to ±0...
  • Page 95 7. Menu Display and Settings: Menu List Operation >Display On/Off Operation >Display On/Off Selects the items to display in the viewfinder. Selects the items to display in the viewfinder. Item Setting Description Item Setting Description Battery Remain Auto/Voltage/Off Sets the mode of the remaining battery capacity Video Signal Monitor Off/Waveform/Vector/Histogram Selects whether to display the video signal, and and input voltage indicators.
  • Page 96 7. Menu Display and Settings: Menu List Operation >White Setting Operation >Offset White Makes settings related to white balance adjustment. Makes settings related to white balance offset values. Item Setting Description Item Setting Description White Switch<B> Memory/ATW Sets the operating mode selected by the B Warm Cool <B>...
  • Page 97 7. Menu Display and Settings: Menu List Operation >Clip Operation >Planning Metadata Makes settings relating to clip names and management. Makes settings relating to planning metadata operations. Item Setting Description [Note] Do not assign clip names that begin with the “.” (period) symbol. Clips with names in which the first character is “.” Load Media (B) Execute/Cancel Loads planning metadata from the SxS memory...
  • Page 98 7. Menu Display and Settings: Menu List Operation >Flash Band Reduce Paint Menu Corrects the flashband phenomena. [Note] Default values are shown underlined and in bold text. This item is disabled (grayed out) during recording and when Slow&Quick is set to On. Item Setting Description...
  • Page 99 7. Menu Display and Settings: Menu List Paint >Black Paint >Gamma Sets the black level (image level without lighting). Makes settings related to gamma correction. You can achieve a desired look by adjusting the black level for deeper or shallower blacks. Gamma correction allows you to adjust the contrast of the image to significantly alter the impression of an image.
  • Page 100 7. Menu Display and Settings: Menu List Paint >Knee Paint >Detail/Detail(SD) Makes settings related to knee correction. Makes settings related to detail adjustments in HD mode and SD mode. Knee correction is processing that prevents blown out highlights by compressing the bright parts of the Detail adjustment processing improves the clarity of images by adding a detail signal to the outline of the image in response to the upper limit for the dynamic range of the recorded/output image.
  • Page 101 7. Menu Display and Settings: Menu List Paint >Skin Detail Paint >Matrix Makes settings related to skin detail correction. Makes settings related to matrix correction. Skin detail correction processing increases or decreases the detail level of a specified color range, for the Adjusts the hue and vividness of the image using matrix correction.
  • Page 102 7. Menu Display and Settings: Menu List Paint >Low Key Saturation Maintenance Menu Makes settings related to low key saturation correction. Corrects the saturation of colors in dark parts of the image. Item Setting Description Default values are shown underlined and in bold text. Setting On/Off Turns the low key saturation correction function...
  • Page 103 Near End: Other Battery 11.5V to 11.8V to 17.0V Sets the threshold value for displaying the “Battery Set: Audible (0.1V steps) Near End” warning when using a non-Sony Speaker Attenuate Off/3dB/6dB/9dB/12dB Selects the volume from the monitor speakers battery pack. (does not affect earphone volume).
  • Page 104 7. Menu Display and Settings: Menu List Maintenance >Audio Maintenance >Audio Makes settings related to audio. Makes settings related to audio. Item Setting Description Item Setting Description CH2 Wind Filter On/Off Turns the channel 2 wind noise reduction filter Audio CH3 Level Side3/Front/Front+Side3 Selects the knob for adjusting the audio level on/off.
  • Page 105 7. Menu Display and Settings: Menu List Maintenance >WRR Setting Maintenance >Time Code Makes settings related to the wireless tuner. Makes settings related to timecode. Item Setting Description Item Setting Description TX LCF Frequency Sets the low cut filter frequency of the transmitter Counter Display Counter/Duration Select the method used to reset the counter value...
  • Page 106 RM Common Memory On/Off Selects whether to share (On) or not share (Off) Contact a Sony service representative for information about settings between when using a remote control aberration correction lenses. unit connection and when the camcorder is operated locally.
  • Page 107 7. Menu Display and Settings: Menu List Maintenance >White Filter Maintenance >Flicker Reduce Makes settings related to filters. Makes settings related to the flicker correction function. You can correct the flicker created when shooting a subject under lighting where the brightness varies Item Setting Description...
  • Page 108 7. Menu Display and Settings: Menu List Maintenance >Basic Authentication Maintenance >Network Makes settings related to basic authentication. Makes settings related to network connections. Item Setting Description Item Setting Description User Name (Displays the current user name.) Sets the user name (arbitrary name for basic Wired LAN Detail DHCP (On/Off) Enables/disables DHCP.
  • Page 109 7. Menu Display and Settings: Menu List Maintenance >Network Client Mode Maintenance >Streaming Makes settings related to network client mode. Makes settings related to streaming. Item Setting Description [Note] Network client mode cannot be set if values are not entered for all items. Preset Select Preset 1/Preset 2/Preset 3...
  • Page 110 7. Menu Display and Settings: Menu List Maintenance >Clock Set Maintenance >Version Sets the internal clock. Displays the version of the camcorder, and updates the camcorder. Item Setting Description Item Setting Description Time Displays the time setting screen. Number Displays the software version of the camcorder (Vx.xx).
  • Page 111 7. Menu Display and Settings: Menu List File Menu File >All File Makes settings related to ALL file operations. Item Setting Description Default values are shown underlined and in bold text. Clear All Preset Execute/Cancel Returns the current settings and presets of All File menu items to their factory default values File >User File (execute by selecting Execute).
  • Page 112 7. Menu Display and Settings: Menu List File >Reference File File >Lens File Makes settings related to reference file operations. Makes settings related to lens file operations. Item Setting Description Item Setting Description File ID Displays a screen for displaying/editing the file ID White Offset R –99 to ±0...

  • Page 113: Assigning Functions To Assignable Switches

    7. Menu Display and Settings Assigning Functions to Assignable Switches Using the Assignable Switch item of the Operation menu, you can assign user-specified functions to the Functions That Can Be Assigned to the ASSIGN. 2 Switch ASSIGN. 0 to 3 switches, the ASSIGNABLE 4 and 5 switches, the ONLINE button, and the RET button on the lens.
  • Page 114 7. Menu Display and Settings: Assigning Functions to Assignable Switches Functions That Can Be Assigned to the ASSIGN. 1 and 3 Switches, the Assignable Switch setting Function State when camcorder is next powered on ASSIGNABLE 4 and 5 Switches, and the ONLINE Button Manual Focus Assist Turns the manual focus assist function on/off.
  • Page 115 7. Menu Display and Settings: Assigning Functions to Assignable Switches Assignable Switch setting Function State when camcorder is Functions That Can Be Assigned to the RET Button on the Lens next powered on Digital Extender ×3 Turns the screen magnification (×3) function on/ Setting not retained off.

  • Page 116: Saving And Loading User Configuration Data

    8. Saving and Loading User Configuration Data User Configuration Data You can save setup menu settings in the User Files Reference Files camcorder’s internal memory and on SD cards. This allows you to quickly recall an appropriate set of menu settings for the current situation. User files save the setting items and data of the Reference files save the scene file standard settings To save setup data on an SD card, insert a writable...

  • Page 117: User Files

    8. Saving and Loading User Configuration Data User Files Saving a User File Loading a User File Select File > User File >Save SD Card in the Select File >User File >Load SD Card in the setup menu. setup menu. A screen for selecting a user file save A user file list screen appears.

  • Page 118: All Files

    8. Saving and Loading User Configuration Data ALL Files Saving Configuration Data as an ALL Restoring All Current Settings to Resetting Current Settings and Preset Turn the MENU knob to select [Done], then press the knob. File Preset Values Values to Factory Default Settings The File ID is updated.

  • Page 119: Scene Files

    8. Saving and Loading User Configuration Data Scene Files Saving a Scene File in Internal Changing the File ID Turn the MENU knob to select a file to load, then press the knob. Memory A confirmation screen appears. Select File >Scene File >File ID in the setup Turn the MENU knob to select [Execute], then menu.

  • Page 120: Reference Files

    8. Saving and Loading User Configuration Data Reference Files Saving Current Settings as Preset Loading a Reference File from an SD Values Card Select File >Reference File >Store Reference in Select File >Reference File >Load Reference(SD the setup menu. Card) in the setup menu. A confirmation screen appears.

  • Page 121: Lens Files

    8. Saving and Loading User Configuration Data Lens Files Saving a Lens File in Internal Memory Changing the File ID Turn the MENU knob to select a file to load, then press the knob. A confirmation screen appears. Select File >Lens File >Store Internal Memory Select File >Lens File >File ID in the setup Turn the MENU knob to select [Execute], then in the setup menu.

  • Page 122: Gamma Files

    Select File >User Gamma >Current Settings in Save created user gamma files to be loaded in the the setup menu to display a list of the currently “PRIVATE/SONY/PRO/CAMERA/HD_CAM” directory configured user gamma files. of the SD card. Loading a User Gamma File from an...

  • Page 123: Connecting External Devices

    9. Connecting External Devices Connecting a Remote Control Unit When an RM-B170 Remote Control Unit, Releasing Remote Control Mode Button RM Rec Start setting Camcorder setup menu RM-B170 RCP1001/1501 Remote Control Panel, or other Camera PARA control unit is connected, some camcorder Camcorder REC Disabled Enabled...
  • Page 124 9. Connecting External Devices: Connecting a Remote Control Unit data stored in the main data block even if a remote control unit is connected. In this case, the settings stored in the main data block will be updated when you change the settings on the remote control unit.

  • Page 125: Connecting An External Monitor

    9. Connecting External Devices Connecting an External Monitor Select the output signal and use an appropriate cable for the monitor to be connected. of that external device to match the analog composite signal setting for the VIDEO OUT connector. To input camcorder output audio to an external device such as a monitor, VTR, or other recording device, connect the audio output of the AUDIO OUT connector to the audio input of that external...

  • Page 126: Managing/Editing Clips With A Computer

    9. Connecting External Devices Managing/Editing Clips with a Computer The clips recorded on SxS memory cards with this To start USB connection To remove an SxS memory card Store the clips to be edited on the HDD of camcorder can be controlled on a computer or your computer in advance, using the supplied edited using optional nonlinear editing software.
  • Page 127 9. Connecting External Devices: Managing/Editing Clips with a Computer [Note] Checking for copy read errors State Solution When a copy destination folder is specified in step 1 and During clip recording, Terminate the previous Media(A)(B) to USB is selected, slot A clips are copied to You can check for read errors after writing clips by playback, thumbnail operation.

  • Page 128: Configuring A Shooting And Recording System

    9. Connecting External Devices Configuring a Shooting and Recording System You can mount a CA-FB70/TX70 HD Camera Adaptor to the camcorder and connect a Camera Control Tally and Call Indicators Unit (CCU). This allows you to configure a shooting and recording system consisting of multiple camcorders with camera extension units connected to a remote control unit.
  • Page 129 9. Connecting External Devices: Configuring a Shooting and Recording System Supported Formats and Limitations of Shooting/Recording Systems Operation menu System format of Camcorder camera adaptor / limitation camera control unit Format Input/Output Return video The supported formats and operation limitations of a shooting/recording system comprising the display Frequency Rec Format...

  • Page 130: Recording External Input Signals

    9. Connecting External Devices Recording External Input Signals You can record SDI signals from devices connected to the SDI IN connector of the camcorder. HD/SD Operation >Format >Rec Operation >Format Supported external input signal Format in the setup menu >Frequency in the setup menu formats To output and record input signals instead of the camera picture, set Operation >Input/Output >Source Select in the setup menu to [External].

  • Page 131: Maintenance And Inspection

    Never use organic solvents such as thinners. representative. corroded due to prolonged outdoor use. Periodic inspections are recommended to keep the unit working properly and to prolong its usable lifetime. Contact a Sony service or sales representative for more information about inspections.

  • Page 132: Error/Warning System

    (If the camcorder does not turn off when the POWER switch is set to OFF, remove the battery or disconnect the AC supply.) If the error persists when the camcorder is turned on again, contact your Sony service representative. Warning Display Follow the instructions provided if the following display occurs.
  • Page 133 10. Maintenance and Inspection: Error/Warning System Warning message Warning sound WARNING Tally/REC indicator Cause and Solution indicator Clips Full Continuous High-speed flashing The maximum number of clips that can be recorded on an SxS memory card has been reached. Recording or copying more clips is not possible.
  • Page 134 10. Maintenance and Inspection: Error/Warning System Caution and Operation Confirmation Display The following caution and operation messages may appear in the center of the screen. Follow the instructions provided to resolve the issue. Display indication Cause and Solution Battery Error An error was detected in the battery pack.

  • Page 135: Appendix

    11. Appendix Messages Displayed During Operation This section describes the meaning of messages that may be displayed in response to button, switch, or knob operation. [Notes] ˎ Covers only the messages displayed about possible causes in response to an operation. ˎ...
  • Page 136 11. Appendix: Messages Displayed During Operation Operation Message Meaning and possible cause GAIN switch was operated Gain: xxxxdB Gain setting was changed. (where “xxxx” is the gain value) DCC switch was operated DCC: On DCC was set to On. DCC: Off DCC was set to Off.
  • Page 137 11. Appendix: Messages Displayed During Operation Operation Message Meaning and possible cause Auto white switch was operated Color Bars Cannot execute because a color bar signal is being output. Cannot Proceed Not Available Cannot execute because playback is in progress. Playing back Not Available Cannot execute because the thumbnail screen is displayed.
  • Page 138 11. Appendix: Messages Displayed During Operation Operation Message Meaning and possible cause Assignable switch assigned with Streaming Cannot Proceed Cannot configure because streaming is in progress. was operated while network client mode is Streaming Setting is “On” enabled Cannot Connect to CCM Cannot connect to Connection Control Manager because network connection is unavailable.
  • Page 139 11. Appendix: Messages Displayed During Operation Operation Message Meaning and possible cause ND filter was changed 2: 1/4ND xxxxK ND filter was changed. (where “2: 1/4ND” is the ND filter type and “xxxx” is the color temperature value) ND:3 CC: x xxxxK ND filter was changed with ND Filter C.Temp set to Off and Electrical CC assigned to an assignable switch.
  • Page 140 11. Appendix: Messages Displayed During Operation Operation Message Meaning and possible cause Assignable switch assigned with Shot Mark2 Shot Mark2 Shot mark 2 was added. was operated (arbitrary character string when defining planning metadata) Cannot Record Essence Mark Cannot add because the maximum number of essence marks has been reached. Reached Essence Mark Limit Cannot Proceed Cannot add because of the following conditions.

  • Page 141: Items Saved In User Data

    11. Appendix Items Saved in User Data Table legend Item Sub-item File type Yes: Saved Scene Reference Lens No: Not saved LCD Color —: Not saved (temporary setting) LCD Marker&Zebra Default: Not saved in Reference file, but saved as default menu preset when File >Reference in the setup Rec Function Slow &...
  • Page 142 11. Appendix: Items Saved in User Data Item Sub-item File type Item Sub-item File type Scene Reference Lens Scene Reference Lens Marker Setting Zebra Zebra Select Color Zebra1 Level Center Marker Zebra1 Aperture Level Safety Zone Zebra2 Level Safety Area Display On/Off Video Level Warning Aspect Marker...
  • Page 143 11. Appendix: Items Saved in User Data Item Sub-item File type Item Sub-item File type Scene Reference Lens Scene Reference Lens Display On/Off Streaming Status Planning Load Media (A) — — — — Metadata Load Media (B) — — — —...
  • Page 144 11. Appendix: Items Saved in User Data Item Sub-item File type Item Sub-item File type Scene Reference Lens Scene Reference Lens White Color Temp <A> Detail Setting Default Color Temp Balance <A> Level R Gain <A> H/V Ratio B Gain <A> Crispening Color Temp <B>...
  • Page 145 11. Appendix: Items Saved in User Data Item Sub-item File type Item Sub-item File type Scene Reference Lens Scene Reference Lens Skin Detail Setting Saturation Mode Saturation Mode Area Detection — — — — Knee Saturation Area Indication Black Gamma Level Low Key Saturation Saturation...
  • Page 146 Master Gain (TMP) — — — — Audio CH3 Level Battery Near End:Info Battery Audio CH4 Level End:Info Battery Near End:Sony Battery End:Sony Battery Near End:Other Battery End:Other Battery Detected Battery — — — — DC Voltage Alarm DC Low Voltage1...
  • Page 147 11. Appendix: Items Saved in User Data Item Sub-item File type Item Sub-item File type Scene Reference Lens Scene Reference Lens WRR Setting WRR Valid CH Sel DCC Adjust DCC Function Select WRR CH Select DCC D Range WRR Delay Comp DCC Point —...
  • Page 148 11. Appendix: Items Saved in User Data Item Sub-item File type Item Sub-item File type Scene Reference Lens Scene Reference Lens Network Wired LAN Streaming Preset2 Destination Port Wired LAN Remote Preset3 Size Wired DHCP Bit Rate IP Address Type Detail Subnet Mask Destination...
  • Page 149 11. Appendix: Items Saved in User Data File Menu Item Sub-item File type Scene Reference Lens Lens File File ID Item Sub-item File type File Source — — — — Scene Reference Lens Clear Lens Offset — — — — User File Load SD Card —...

  • Page 150: Special Recording Support By Format

    11. Appendix Special Recording Support by Format Special recording Format Normal recording Slow & Quick Clip Continuous Picture Cache Rec Interval Rec 2-slot Simul Rec Motion XAVC-I HD exFAT XAVC-L422 HD 50 XAVC-L422 HD 35 XAVC-L422 HD 25 — MPEG HD422 exFAT —...

  • Page 151: Usage Precautions

    Be sure to refer to the section Avoid using or storing the camcorder in the it and contact your dealer or a Sony service “Mounting and Adjusting the Lens” (page 26). The problem may be alleviated by executing following places.
  • Page 152 ˎ If you move to another location right after ˎ receiver based on the orbital information (almanac ˎ SONY WILL NOT BE LIABLE FOR DAMAGES OF ˎ setting “GPS” to “On” in the menu, it may data) and travel time of the signals, etc.

  • Page 153: Specifications

    11. Appendix Specifications Storage temperature DVCAM XAVC Long General –20 °C to +60 °C (–4 °F to +140 °F) LPCM 16-bit, 48 kHz, 2-channel XAVC-L 50 mode File system Proxy 1920×1080/59.94P, 50P, 59.94i, 50i, exFAT, UDF AAC-LC, 128 Kbps, 2-channel 29.97P, 23.98P, 25P Mass Approx.
  • Page 154 MIC IN: XLR type, 5-pin, female, –70 dBu to Headroom Lens mount –30 dBu 20 dB (factory default) (20, 18, 16, Camera Section Sony 2/3-inch bayonet mount WRR: D-sub 15-pin 12 dB), EBUL Focal length Analog CH1: –40 dBu Frequency response 8.2 mm to 164 mm Digital CH1/CH2: –40 dBFS...
  • Page 155 Shoulder belt (1) Other peripheral devices BKW-401 WHATSOEVER. Cold shoe kit (1) ˎ SONY WILL NOT BE LIABLE FOR CLAIMS OF ˎ Lens mount cap Tripod attachment Equipment for remote control ANY KIND MADE BY USERS OF THIS UNIT OR...
  • Page 156 Korea http://bp.sony.co.kr RM-B170/B750 China http://pro.sony.com.cn CA-FB70 HD Camera Adaptor RCP-1000/1500/1530 India http://pro.sony.co.in RCP-1001/1501 Remote Control Unit CA-TX70 HD Camera Adaptor Sony Creative Software, software download page: VCT-14 http://www.sonycreativesoftware.com/download/ Tripod attachment software_for_sony_equipment BP-FLX75 BC-L70A Battery Pack Battery Charger AC-DN10/DN2B AC Adaptor...
  • Page 157 This EULA is a legal agreement between you and Sony your backup and restoration through certain SOFTWARE authorized to do so by SONY. You may not remove, alter, Corporation (“SONY”). This EULA governs your rights features, refusal to accept your request to enable restoration and obligations regarding the software of SONY and/or cover or deface any trademarks or notices on the SOFTWARE.
  • Page 158 EULA. These remedies are in addition contents and peripheral devices that interact with the to any other remedies SONY may have at law, in equity or camcorder and the SOFTWARE; (4) use and frequency of use under contract.
  • Page 159 11. Appendix: Specifications Open Software Licenses Trademarks On the basis of license contracts between Sony ˎ XDCAM is a trademark of Sony Corporation. ˎ and the software copyright holders, this product ˎ XAVC and ˎ are registered trademarks of uses open software.

This manual is also suitable for:

Pxw-x400kcPxw-x400

Table of Contents