Advertisement
Quick Links
PARTS INCLUDE :
1. 1-Cabinet Hutch
2. 1-Cabinet Base
3. 4-Adj. Shelf
HARDWARE INCLUDE :
HARDWARE INCLUDE :
A. 16 – Shelf Supports
1. 8 – washer
2. 8 – nuts
B. 16 - Screw JP.
C. 4 - Allen Bolt
PARTS INCLUDE :
D. 4 - Lock Washer
E. 4 - Flat Washer
A. 1 – Top
F. 1 - Allen Key
B. 4 – Leg
G. 2- Anti Tip Kit
I.
4- Small Screw
II.
4- Large Screw
III.
2- Bracket
IV.
2- Retention Belt
1.
Hutch Cabinet
A.
16 pcs
Shelf Supports
E.
4 Pcs
Flat Washer
Date: 19-11-2018
CLAIRMONT CABINET
ASSEMBLY INSTRUCTION
PARTS:
1 Set
2.
Base Cabinet
HARDWARE:
B.
16 pcs
Screw JP.
F.
1 Pc
Side Shelf Base
Allen Key
1 Set
3.
C.
4 Pcs
Allen Bolt
G.
2 Set
Anti Tip Kit
4 pcs
Adj. Shelf
D.
4 Pcs
Lock Washer
(Tools Not Included)
Screwdriver
Page 1 of 5
Advertisement
Related Manuals for GABBY CLAIRMONT
Summary of Contents for GABBY CLAIRMONT
- Page 1 CLAIRMONT CABINET ASSEMBLY INSTRUCTION PARTS INCLUDE : 1. 1-Cabinet Hutch 2. 1-Cabinet Base 3. 4-Adj. Shelf HARDWARE INCLUDE : HARDWARE INCLUDE : A. 16 – Shelf Supports 1. 8 – washer 2. 8 – nuts B. 16 - Screw JP.
- Page 2 CLAIRMONT CABINET ASSEMBLY INSTRUCTION Remove Adjustable Shelf Left Remove Adjustable Shelf Right STEP 1 Carefully unwrapped the adjustable shelves being tied at the side of the Hutch Cabinet. STEP 2 STEP 2 Step - Carefully remove the wine rack from the Hutch Cabinet.
- Page 3 CLAIRMONT CABINET ASSEMBLY INSTRUCTION STEP 3 Carefully place the Hutch above the Base, aligning the holes for the bolts on hutch cabinet to the insert nut of the base. Insert the Allen Bolt through the lock washer and flat washer and into the insert nut of the base through the hole of the Hutch then lock with the Allen key.
- Page 4 CLAIRMONT CABINET ASSEMBLY INSTRUCTION STEP 5 To reposition the shelves, un-screw the shelves from shelf supports, then carefully lift the shelves up and out of the case. Inserts stem of shelf supports into holes in end panel, as shown. rest the shelf on the shelf supports, and reinstall screws.
- Page 5 CLAIRMONT CABINET ASSEMBLY INSTRUCTION STEP 7 - If the floor is uneven adjust the levelers located at the underside of the Feet, to do this lift Up the side that need to be elevated to provide access to the levelers, turn the leveler until adequate contact with the floor.