Page 1
Owner's Manual IPS LED MONITOR (LED MONITOR*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List 43UN700/43UN700P 43BN70U/43BN70UP 43UN700T www.lg.com...
Contents CONTENTS LICENSE TROUBLESHOOTING ASSEMBLING AND PREPARING SPECIFICATIONS Supported Drivers and Software Factory Support Mode (Preset Mode, PC) Component and Button Description HDMI - How to Use the Joystick Button DisplayPort / USB-C Moving and Lifting the Monitor HDMI Timing (Video) - Using the cable holder Power LED - Installing onto a table...
LICENSE LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Stan- dards Association.
It is recommended that use the supplied components. If you use generic cables not certified by LG, the screen may not display or there may be image noises. Illustrations in this document represent typical procedures, so they may look different from the actual product.
ASSEMBLING AND PREPARING Component and Button Description IR Receiver Joystick Button Power LED On: power is on How to Use the Joystick Button Off: power is off You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
ASSEMBLING AND PREPARING Moving and Lifting the Monitor CAUTION When moving or lifting the monitor, follow these in- As far as possible, avoid touching the monitor structions to prevent the monitor from being scratched screen. This may result in damage to the screen or or damaged and to ensure safe transportation regard- some of the pixels used to create images.
ASSEMBLING AND PREPARING Using the cable holder Installing onto a table Lift the monitor and place it on the table in an upright Arrange the cables using the cable holder as shown in position. the illustration. Place at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation.
Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards for a comfortable viewing experience. 43UN700 100-240 V ~ 43UN700P 43BN70U Make sure to use the power cord that is pro- 43BN70UP vided in the product package and connect it to a grounded power outlet.
Kensington lock user manual or visit the website at http://www.kensington.com. 43UN700 43UN700P 43BN70U 43BN70UP Connect the Kensington security system cable between the Monitor set and a table. Be careful not to touch or press the screen area when adjusting the angle of the monitor.
If you use improper screw, the product might be dam- aged and drop from mounted position. In this case, LG Electronics is not responsible for it. Wall Mount (A x B) 200 x 200 Standard screw...
Page 11
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Please use the genuine LG wall mounting bracket. For more informa- tion, contact your local retail store or a qualified installer.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover.
NOTE There may be no video or audio output depending on the DP version of the PC. If you use generic cables not certified by LG, the screen may not display or there may be image noises. NOTE If you use HDMI PC, it can cause compatibility problem.
USING THE MONITOR Connecting to AV Devices USB-C connection Transmits digital video and audio signals from your PC HDMI connection to the monitor. Connect the monitor to your PC using the USB C-C Transmits the digital video and audio signals from your cable as shown in the illustration below.
USING THE MONITOR Connecting Peripherals The items supplied with your product may vary depending on the model. Product specifications or contents of this manual USB Cable connection - PC may be changed without prior notice due to upgrade of product functions. The USB port on the product functions as a USB hub.
USING THE MONITOR Connecting to External Devices Connecting Headphones Connect peripherals to the monitor via the headphones port. Connect as illustrated. (sold separately) NOTE Peripheral devices are sold separately. If you use angled earphones, it may cause a prob- lem with connecting another external device to the monitor.
User Settings USER SETTINGS NOTE Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual. When Beep Guide is activated, pressing the joystick button will take you to Settings right away. Activating the Main Menu Press the joystick button on the bottom of the monitor.
User Settings User Settings Menu Settings To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings. Configure the options by moving the joystick up/down/left/right. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / Ok) it.
Page 19
User Settings [PBP/PIP ON] Settings > Input Description Input List Displays the screens of main input and sub input. Aspect Ratio Adjusts the aspect ratio of the screen. Main input Full Wide Displays the video to fit the PBP/PIP screen, regardless of the video signal input. Original Displays the video in the aspect ratio of the video signal input on the PBP/PIP screen.
Page 20
User Settings [Picture Mode on HDR signal] Settings > Picture Description Picture Mode Custom Allows the user to adjust each element. Vivid Optimized the screen for HDR vivid colors. Standard Optimized the screen for HDR standard. Cinema Optimized the screen for HDR video. This mode is optimized for FPS games.It is suitable for very dark FPS games.
Page 21
User Settings Picture Adjust Brightness Adjusts the brightness of the screen. Contrast Adjusts the contrast of the screen. Sharpness Adjusts the sharpness of the screen. SUPER High Optimized picture quality is displayed when a user wants crystal clear images. RESOLUTION+ It is effective for high quality video or game.
Page 22
User Settings Color Adjust Gamma Mode 1, Mode 2, The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. Mode 3 Mode 4 If you do not need to adjust the gamma settings, select Mode 4. Color Temp Custom The user can adjust it to red, green, or blue by customization.
Page 23
User Settings Settings > General Description Language Sets the menu screen to the desired language. Sound Optimizer Allows optimized sound for individual Monitor installation. Stand Type Optimized sound for a stand-mounted Monitor. Wall Mount Optimized sound for a wall-mounted Monitor. Type SMART ENERGY High...
TROUBLESHOOTING TROUBLESHOOTING Nothing is displayed on the screen. Is the monitor's power cord plugged in? Check if the power cord is correctly plugged into the power outlet. Check the power cable connection and press the power button. Is the power LED on? Is the power on and the power LED Check that the connected input is enabled (Settings >...
Page 25
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Be sure to install the display driver from our web site: http://www.lg.com . Have you installed the display driver? Make sure to check if the video card supports Plug&Play function.
SPECIFICATIONS HDMI Timing (Video) Factory support mode Horizontal Vertical Remarks (Preset Mode) Frequency(kHz) Frequency(Hz) 480p 31.5 720p 45.0 1080p 67.5 When HDMI ULTRA HD Deep Color is 2160p set to ON. Power LED Mode LED Color On Mode White (For a few seconds) Sleep Mode (Standby Mode) Off Mode...
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable. Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] : First command to control the Monitor.
BEEP GUIDE Beep Guide Menu Location Menu Location Quick Settings Input (PBP / PBP2) - Input List - Main - HDMI 3 2 1 1 3 Quick Settings - Brightness Input (PBP / PBP2) - Input List - Main - HDMI 4 2 1 1 4 Quick Settings - Brightness 1 1 1 Slider...
Page 34
BEEP GUIDE Menu Location Menu Location Input (PBP_4P) - Input List - Main - HDMI 1 2 1 1 1 Input (PBP_4P) - Aspect Ratio - Sub3 - Original 2 2 4 2 Input (PBP_4P) - Input List - Main - HDMI 2 2 1 1 2 Input (PBP_4P) - PBP/ PIP Input (PBP_4P) - Input List - Main - HDMI 3...
Page 35
BEEP GUIDE Menu Location Menu Location Input (PIP) - Aspect Ratio - Sub - Original 2 2 2 2 Picture - Picture Adjust - SUPER RESOLUTION+ - 3 2 4 1 High Input (PIP) - PBP/ PIP Picture - Picture Adjust - SUPER RESOLUTION+ - 3 2 4 2 Input (PIP) - PBP/ PIP - OFF 2 3 1...
Page 36
BEEP GUIDE Menu Location Menu Location Picture - Color Adjust - Six Color - Red Hue 3 4 6 1 General - Language - Spanish 4 1 4 Picture - Color Adjust - Six Color - Red Hue 3 4 6 1 1 General - Language - Italian 4 1 5 Slider...
Page 37
BEEP GUIDE Menu Location General - Automatic Standby - Off 4 6 4 General - DisplayPort Version General - DisplayPort Version - 1.4 4 7 1 General - DisplayPort Version - 1.2 4 7 2 General - DisplayPort Version - 1.1 4 7 3 General - HDMI ULTRA HD Deep Color General - HDMI ULTRA HD Deep Color - On...
Page 38
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs,NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product.