Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. í í í...
Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: •...
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. -5° 22° Height Adjustment After pressing the top of the monitor, remove the fixed pin and adjust the height of the monitor.
Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure. Power off your computer and all attached devices, and unplug the computer power cord. Connect the cables according to below icon indication.
Page 9
Connect one end of the analog signal cable to the monitor D-SUB connector and the other end to the computer. 4. Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer. Chapter 1.
Page 10
5. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevan national installation and or equipment regulations shall be considered. A certified powe supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IE 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used.
Thank you for purchasing this Lenovo™ oduct. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system;...
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. To use the controls: Press to open the main OSD menu. to move among the icons. Select an icon and press to access that function.
Page 16
Table 2-2. OSD functions Controls and Controls and OSD Icon on Submenu Description Adjustments Adjustments Main Menu (Analog) (Digital) Same as Analog Adjusts overall brightness Brightness Brightness/ Adjusts difference between Contrast Contrast light and dark areas Controls Locked - not Moves image left or right.
Page 17
Table 2-2. OSD functions Controls and Controls and OSD Icon on Submenu Description Adjustments Adjustments Main Menu (Analog) (Digital) Same as Analog Shows resolution, refresh rate, and product details. Note: This screen does not allow any changes to Information the settings. Changes languages of menu.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Page 21
Step 3: Remove the base from the display. Step 4: Lift the holder up to the top point according to the figure. Step 5: Push up the back fastener to remove the holder according to the figure. Step 6: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm.
Chapter 3.Reference information This section contains monitor specifications, instructions to manually install the monito driver, troubleshooting information. Monitor specifications Table 3-1. Monitor specifications for type-model 61A3-HAR1-WW Dimensions Height 356.3 mm (14.03 in.) Depth 177.2 mm (6.98 in.) Width 512.6 mm (20.18 in.) Panel Size 21.5 in.
Page 23
Table 3-1. Monitor specifications for type-model 61A3-HAR1-WW Supported Display Horizontal frequency 30 kHz - 83 kHz Modes Vertical frequency 50 Hz - 75 Hz Native Resolution 1920x1080 at 60 Hz Temperature Operating 0 to 45 C (32 to 113 F) Storage to 60 C (-4...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The video signal cable Be sure the video cable is "Connecting and The power is loose or connected with the turning on your indicator is disconnected from the system properly. monitor"on page 1-4 green, but there system or monitor.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
• Scratches or punctures on monitor screens. Service parts The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to supprot the customer warranty. Parts are for service use only. The table below shows information for model Table 3-3.
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Page 31
Warranty service and support: +358-800-1-4260 (Finnish) France Warranty service and support: 0810-631-213 (hardware) (French) Germany Warranty service and support: 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish) Appendix A.
Page 32
(French) Malaysia 1-800-88-0013 03-7724-8023 (Standard Charges Apply) (English) Malta 356-21-445-566 (English, Italian, Maltese Arabic) Mexico 001-866-434-2080 (Spanish) Netherlands 020-513-3939 (Dutch) New Zealand 0508-770-506 (English) Nicaragua 001-800-220-2282 (Spanish) Norway 8152-1550 (Norwegian) Panama Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish) Appendix A.
Page 33
Country or Region Telephone Number Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999 (Polish, English ) Portugal 808-225-115 (Standard Charges Apply) (Portuguese) Romania 4-021-224-4015...
Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacturer. Do not use the ac power cord for other devices. Appendix B.