61
USING THE TOUCH SCREEN
Precautions When Using the Touch Screen
CAUTION
The monitor is optimized for indoor use.
The touch screen monitor is optimized for Windows 7.
Do not remove the USB cable when using the touch screen monitor.
Use LG TDS(Touch Display Settings) provided with the monitor to set touch coordinates when
rotating the monitor connected to a Windows XP computer.
The LG TDS provided with the monitor only supports the following graphic cards: nVidia, AMD (ATI)
and Intel.
If touch does not respond, remove the USB cable and connect it back in ten seconds.
Touch responds when the monitor is powered on.
Up to 10 touch-points are supported when the monitor is connected to a Windows 7 computer; one
when connected to a Windows XP computer.
Set the monitor as the primary monitor in Windows XP.
Touch accuracy is optimized by using full screen mode.
Your action may not work properly on the edge area of the touch screen.
If the 10 touch-points are not detected, restart your PC. (Windows 7)
The touch operation (e.g. touches count, gesture, etc.) may vary depending on the content.
The spot that you try to touch and the one which is actually touched on the screen may differ
depending on the angle you view the monitor screen.