Page 1
GM 730f User Guide - English This document is the user guide for the GM730f Windows Mobile Pocket PC. All rights for this document are reserved by LG Electronics. Copying, modifying and distributing this document without the consent of LG Electronics are prohibited.
Page 2
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “ Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions: (1) This device & its accessories may not cause harmful interference. (2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.
Getting Started Installing the SIM Card and Battery 1. Installing the SIM card. Your SIM card contains your phone number, service details and contacts and must be inserted into your handset. If your SIM card is removed then your handset becomes unusable (except for emergency calls depending on which Country you are in at the time) until a valid one is inserted.
Page 5
Getting Started <Charging mode> 1. When you recharge your phone after device switch off, the phone displays a charging animation. 2. When the phone is fully charged, the animation displays “Battery Charging Complete”. 3. When the battery is fully discharged, animation is not displayed. 4.
Disconnecting the Charger Disconnect the travel adapter from the phone as shown in the diagram. Make sure you pull by the plug, not the cord. How to Use a MicroSD Memory Card (Optional) <MicroSD memory card> <How to insert a microSD memory card> 1.
Getting Started Attention: Avoid using the microSD memory card when the battery is low. When writing to the card, wait for the operation to complete before removing the card. The card is designed to fit easily into the system one way only. Do not bend the card or force it into the slot.
Reset the Device Occasionally you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs.
Getting Started To perform a hard reset • A Hard Reset should only be performed after all other trouble shooting options have been exhausted. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on.
If Accelerometer Sensor is turned on (check (LG Menu) > Settings > Sensor > Accelerometer Sensor), rotation sensor automatically perceive the orientation of your device and decide to direction of screen display when the orientation for device is changed.
You can tap a section on the screen to open the associated program. To access the Today screen, tap (LG Menu) > Settings > Today > Items tab. You can select the item you want to appear on the Today screen. To change its position, tap Move up or Move Down.
Default MS Today Screen On the Today screen, you can see important and recent information for the day. 1. Start button: Shows the Start menu that you can use directly. 2. LGdatetime: Shows today's date and current time. Tap to select the clock type. 3.
Page 13
Screen information Indicators Following are some of the status icons that you may see on your device. Icon Description Bluetooth Hands-Free connection established Bluetooth Hands-Free channel opened Bluetooth High Quality Audio channel opened Indicates the remained battery power . Indicates the battery is very low. Battery charging.
Icon Description Calls are forwarded. Call on hold. Missed call or rejected call. GPRS (General Packet Radio Services) available EDGE (Enhanced Data Rates For Global Evolution) available WCDMA or HSDPA available New e-mail or text messages. New voice mail There are more notifications. Tap the icon to view all. SIM is not inserted.
Apps (Tap LG Menu > Multimedia > Apps) Use pre-installed applications. AT&T GPS (Tap LG Menu > Applications > AT&T GPS) Helps you get around town by providing voice guided turn-by-turn GPS driving directions with real time traffic based navigation.
Page 16
Icon Name (Path) Description Stopwatch (Tap LG Menu > Applications > Stopwatch) Allows you to record the elapsed time of an event. The duration of an individual lap time (up to 99 times) and the total time can be displayed.
GPS data or you have connected a GPS receiver to your device. See Help for details. LG X Button Stop running programs and set the "X" button to end programs immediately when you tap the button.
Icon Description Screen Change the screen orientation, re-calibrate the screen, and change the screen text size. Sensor Set your Auto Luminous Control and Proximity sensor to use or not. System information Check your system information and storage information. Task Manager Shows the executing application list. Time Auto update If Auto update sets On, current city time will follow the network time.
Entering and Searching Information You are available to the various input methods on the screen, including Keyboard, LGJavaKey, Trnscriber, and XT9 Keypad. The Input Panel icon appears on the menu bar to indicate which input method is currently selected. The Input Selector arrow (shown at the right side of the Input Panel icon) opens a list of available input methods.
Page 20
Using the LGJavaKey You can use as navigation keys (left/right/up/down/center) when your Java applications are launched. You can move the cursor and select menu on out of Java application. XT9 Keypad With XT9 keypad, you can enter text by tapping keys displayed on the screen. This is the most common way to enter text with word prediction function in 20 Qwerty of portrait screen.
Entering and Searching Information 123 mode If you tap T9/123(abc/123), you can enter 123 mode. Type numbers using one keystroke per number. You can also enter additional symbols in 123 mode. Symbol mode Short press of FN key gives symbol for one key press, and long press of FN locks symbol mode. The symbol mode enables you to enter various symbols or special characters.
Page 22
To start Transcriber 1. Start a program that accepts user input, such as Word Mobile. 2. Tap the Input Selector arrow, and tap Transcriber. The Transcriber introductory screen appears. To write using Transcriber 1. In a program, position the cursor where you want text to appear. 2.
Entering and Searching Information Transcriber Gestures Use quick strokes of the stylus to edit your text or to insert returns, spaces, or tabs. Insert a paragraph return at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion.
Note You can also use the Enter, Space, and Backspace buttons on the Transcriber toolbar. The Transcriber toolbar You can set the transcriber options such as writing direction, text and shorthand. You can set the shape of letters as your handwriting. You can enter numbers, punctuation and symbols.
Writing as the default input mode. If you prefer typed text, set Typing as the default input mode. To set the input mode for Notes 1. Tap (LG Menu) > Applications > Notes. 2. In the note list, tap Menu > Options. 3. In the Default mode box, tap one of the following: Writing if you want to draw or enter handwritten text in a note.
Page 26
To draw in a note 1. Tap (LG Menu) > Applications > Notes. 2. In the note list, tap New. 3. To draw on the screen, use the stylus like a pen. 4. A selection box appears around your drawing.
Page 27
Entering and Searching Information Thumbnail While viewing a page, a thumbnail can be displayed to: - Give an overview of the current page - Show the position of the current visible screen on the page Currently, there are two modes that can be used. For document map mode, the visible area of the document is the same, and the thumbnail is superimposed at the bottom of the screen, on a transparent panel.
Quick reference Find the word in this document Search > Find Find the word before current focused word Search > Find prev Find the word after current focused word Search > Find next Move to current focused word Search > Snap to result Cancel finding the word Search >...
You can create a stand-alone recording (voice note) or you can add a recording to a note. To create a voice note 1. Tap (LG Menu) > Applications > Notes. 2. Do one of the following: To create a stand-alone recording, record from the note list.
To search for a file or an item 1. Tap (LG Menu) > Applications > Search. 2. In Search for, enter the file name, word, or other information you want to search for. 3. If you have looked for this item before, tap the Search for arrow and select the item from the list.
General functions Adjust the Device Volume You can set the volume of System and Ringtone, which can be set the volume On or Vibrate state or Off. System volume : You can change the volume for sounds, such as the sound you hear when you tap program names and menu options.
Make a call from Contacts (LG Menu) > Communication > Contacts. Tap the desired contact, and tap Call. You can also tap the desired contact in the contacts list, and tap the phone number that you want to call. Or, tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile.
General functions Receiving a Call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. To answer or reject an incoming call To answer the call, tap Answer, or press on the device.
To set up a conference call 1. Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress. 2. Tap Menu > Conference. Note Not all service providers support conference calling. Contact your service provider for details. To Turn the Speakerphone On and Off The built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the conversation.
General functions Additional Dialing Information Make an emergency call Enter the international emergency number for your locale, and tap Talk. Note Additional emergency numbers may be included in your SIM card. Contact your service provider for details.
You can also make an international call or emergency call. Note You can find your phone number by tapping (LG Menu) > Settings > Phone. Making a Voice Call 1. On the Home screen tap 2. Type the desired phone number using the Phone keypad.
Sharing a Video during your Phone Call You can initiate to send or start to receive video with those who has a Video Share capable phone. During a voice call, the phone will let you know whenever you can share video by showing the “Video Share Ready”...
Communication Note Only video files that recorded on resolution 176 * 144 are enable to be shared. 4. If the other party accepts your request, a video share session begins. (It can take a few seconds for the other party to accept your invitation and start the Video Share Call.) Note The Speakerphone will be automatically activated when a Video Share session begins, unless a hands-free device (Bluetooth or stereo headset) is connected.
Page 40
Note The speakerphone will be automatically turned on when a Video Share session gets started, and automatically back to the previous mode when a Video Share session ends. When a Hands-free device (Bluetooth or stereo headset) is connected, Speakerphone will not be turned on automatically.
Page 41
Communication From Contacts, initiating a Video Share Call You can also initiate Video Share Call from Contact. 1. After selecting a number on the Contact screen 2. Tap the Menu > Video Share and you can choose the sharing type between Live and Recorded. 3.
You can also add a picture or assign a ring tone to a contact. To Create a Contact 1. Tap (LG Menu) > Communication > Contacts. 2. Tap New and enter the contact information. 3. Select Outlook Contact or SIM Contact, and enter contact detail. 4. When finished, tap OK.
If you have saved contacts on your SIM card, you can copy them into Contacts on your device several or all. 1. Tap (LG Menu) > Communication > Contacts. 2. Tap Menu > Select Contacts > Several or All. 3. Tap Menu > Copy Contacts > To Contacts.
You can also find a contact tap (LG Menu) > Applications > Search. Recent Calls You can view the recently missed, received and dialed calls. You can make a call, send text message, multimedia message and save to contacts. You can delete the number selected or all at once.
Communication Filter All Calls: Allows you to view the missed, received, and dialled call records. You can make a call, or send a message to the number you have selected from the records. You can also save the number in Contacts.
VPN server connection (typically a work account) before you can send and receive e-mail. 1. Tap (LG Menu) > Communication > Messaging. 2. Tap Setup E-mail. 3. Enter your E-mail address, Password, and tab Next.
Communication 6. Select Automatic Send/Receive Interval. 7. Finish to complete setting up your account, or tap Options to access additional settings. Managing Messages On Select an Account screen, you can view Messages, Outlook E-mail folders. Tap the folder and you can select message box. 1.
Downloading Messages The manner in which you download messages depends on the type of account you have: • To send and receive e-mail for an Outlook E-mail account, begin synchronization with Exchange Server through ActiveSync. • To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider (ISP) or that you access using a VPN server connection (typically a work account), download messages through a remote e-mail server.
Calendar To Add an Event to your Calendar 1. Tap (LG Menu) > Communication > Calendar. 2. Select the date you would like to add an event to. 3. Tap Menu > New Appointment. 4. Type in the subject and location of the event and check the date and enter time you would like your event to begin.
Page 50
The Instant Messaging feature can only be used with the support of the network operator or communities such as AIM, Windows Live and Yahoo! Messenger. For Instant Messaging users, a valid User ID and Password will be required in order to login and exchange messages as well as checking the online status.
Communication Switching between Communities You can Sign-in to all the communities at the same time. All the enabled communities are displayed on the top as tabs. Change Status Tap Menu on the Contact List screen, choose the option My Status and then select the desired status Busy/Away/Offline (This can change depending on your IM provider.
Page 52
Conversations Conversations for each community appear under the conversation group (the first group) on the Contact list screen. To start a new conversation, select the desired contact on the Contact list screen and press the right softkey Send. A conversation screen would open, type the message and press Enter or click the left softkey Send to send the message.
Your tasks are displayed in a task list. Overdue tasks are displayed in red. To Create a Task 1. Tap (LG Menu) > Communication > Tasks. 2. Tap Menu > New Task 3. Enter a subject for the task, and fill in information such as start and due dates, priority, and so on.
Before you can sort tasks by priority, you need to specify a priority level for each task. 1. Tap (LG Menu) > Communication > Tasks. 2. Tap the task you want to change the priority for. 3. Tap Edit and in the Priority box, tap a priority level.
When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task. 1. Tap (LG Menu) > Communication > Tasks. 2. In the task list, do one of the following: Sort the list. Tap Menu > Sort by, and tap a sort option.
Writing Text There are 6 different input modes for different handwriting styles. Tap Menu > Insert > Text > and set the input type on the toolbar. To Change the Font or Insert Time/Date Tap Menu > Options > Advanced tab. To use a new font, open the drop-down list and choose the new font.
Communication To Cut/Copy an Entire Area To cut/copy a portion of text or part of a drawing, select that part (double-click or drag for text, for drawings). Then from the menu icon, select Edit to choose from Cut/Copy/Paste/Paste before/Paste after/Delete. To Change the Zoom Level Tap Menu >...
Page 58
Activesync ActiveSync synchronizes information on your device with information on your PC, such as Outlook content. ActiveSync can also synchronize over a cellular network with Microsoft Exchange Server, if your company or service provider is running Microsoft Exchange Server with Exchange ActiveSync. When you synchronize, ActiveSync compares the information on your device with the information on your PC and/or Exchange Server and updates all locations with the most recent information.
Communication Setting up Windows Vista™ Microsoft Windows Mobile Device Center is the replacement for Microsoft ActiveSync on Windows ® ® ® Vista™. Note Some versions of Windows Vista come with Windows Mobile Device Center already installed. If Windows Mobile Device Center is not available on your Windows Vista, you can install it from the Getting Started Disc that came with your device.
After installation is completed, connect your device to your PC using the sync cable. - Connect the smaller end of the USB cable to your GM730f. - Connect the larger end of the USB cable to the USB port on your computer.
Communication Synchronizing Information When you connect your device to the PC using a USB or a Bluetooth connection, ActiveSync will immediately synchronize. While the device is connected, ActiveSync synchronizes every time you make a change on either the PC or the device. Synchronizing Outlook information If you have set up a synchronization relationship between your device and the PC, synchronization keeps Outlook information up-to-date on both computers.
To start and stop synchronization To synchronize Outlook information and other local information on the PC, including media files, connect your device to the PC using Bluetooth or a cable. If you are synchronizing directly with Exchange Server, you can use the PC connection to the network that is "Desktop Pass-through", or you can synchronize without connecting to the PC over a cellular network.
Communication 1. In ActiveSync on the device, tap Menu > Configure Server. If you have not yet set up synchronization with Exchange Server, this will say Add Server Source. 2. Enter e-mail address, and tap Next. 3. In Server address, enter the address of the server running Exchange Server, select the check box if this Server requires an encrypted (SSL) connection.
Synchronizing Music, Video, and Pictures If you want to carry your music or other digital media with you along while you travel, ActiveSync works with Windows Media Player to synchronise music, video, and pictures. Other than selecting the Media information type in ActiveSync to be synchronised, all media synchronization settings must be set in Windows Media Player.
Communication New Message New Text Messages You can write, edit and view the text messages. on the home screen to access Messaging menu directly. Enter the e-mail address or text message address of one or more recipients, separating them with a semicolon.
The key features that Xpress Mail include are not only read, reply, forward and delete messages but also automatic push mail and full attachment E-mail. Download Xpress Mail client from the web site to your GM730f and install the program. 1. Tap Get Xpress Mail which is on the home screen.
Page 67
Communication 10. Enter your User Name and Password and Tap Next to continue. 11. Tap Register and wait for the registration process to complete. 12. When the process is complete, tap OK when the message appears telling you the device has been successfully registered.
Multimedia MEdia Mall Note Additional charges may accrue when you download new content. Contact AT&T for more information. Shop Tones This menu option connects to AT&T’s ringtone download site. AT&T Starter Packs This menu option allows users to download free trials of mobile applications and games. Shop Games This menu option connects to AT&T’s game download site.
Shop Videos This menu option connects to AT&T’s video download site. This allows users to download the various videos by connecting to the Internet. Shop Music This menu option connects to AT&T’s music download site. This allows users to download music from the Internet.
Transferring Music from the Digital Music Stores Transferring Music from the Digital Music Strores. In order to download music from the computer to your GM730f, handset and microSD card are required. These items are sold separately; go to http://www.wireless.att.com/. 1. Using your computer, open your preferred WMDRM PC music management client.
Device from the dropdown menu. This step begins the download process. Adding Music to your Handset Music files can be added to your handset by using one or more of the following methods: • Download music and ringtones over the AT&T network directly to your device by using the shopping for music feature.
Page 73
Multimedia Transferring a Playlist to the handset 1. Open Windows Media Player on your computer (version 10.0 or higher). 2. Use the USB adapter cable to connect the handset to the target PC. 3. Mobile Device will be shown on the computer screen. 4.
Page 74
Note 1. If you connect handset with specific USB Hub on your PC, above Music Sync service can not be work. So we recommend direct USB Connection on your PC not using HUB. 2. Do not disconnect during transfer. Check if your PC is running Windows XP and Windows Media Player 10 or later.
Multimedia Play Media Use the library on Windows Media Player Mobile to find and play songs, videos, and playlists that are stored on your device or removable storage card. To update the Library 1. If you are not on the Library screen, tap Menu > Library. 2.
Page 76
To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Multimedia XM Radio Selecting XM Radio from the AT&T Music sub menu launches a preinstalled application. The application allows the user to listen to dozens of channels of digital radio on your mobile phone. Get unlimited access to commercial-free music, the latest Hip Hop, R&B, Rock, Jazz, Country anywhere you go. WARNING! This product will use a large amount of data and you are responsible for all data charges incurred.
Note Additional charges may accrue when you download content. Contact AT&T for further information. Cellular Video (CV) CV brings you quick, on-demand access to news, sports, weather and entertainment video clips. Catch up on TV’s hottest shows, funniest comedians, biggest headlines and latest sports scores. You can even personalize your homepage for quick access to your favorites.
To View Pictures 1. Tap (LG Menu) > Multimedia > Pictures & Videos. The images in the My Pictures folder appear as thumbnails by default. 2. Select a picture and tap View. If you cannot find a picture in the default My Pictures folder, go to another folder by tapping the Down arrow.
Page 80
To Play Videos with Audio 1. Tap (LG Menu) > Multimedia > Pictures & Videos. The video files in the My Pictures folder appear as thumbnails by default, which appear with a media icon. 2. Select a video and tap the thumbnail to play it with the built-in Windows Media Player.
You can use a picture as the background on the Today screen. 1. Tap (LG Menu) > Multimedia > Pictures & Videos. 2. Select the picture you want to set as the background. 3. Tap Menu > Set as Today Background.
You can assign a picture to a contact so that you can easily identify the contact at any point of time. 1. Tap (LG Menu) > Multimedia > Pictures & Videos. 2. Select the picture you want to assign to a contact.
Page 83
Multimedia Weather You can check today's weather and the weather forecast of the city that you chose. Just tap the icon of weather from your home screen. To Change the City and State 1. Tap Start > Settings > Personal tab > Clock Style & Weather. Or you can simply tab the clock from home screen.
Page 84
FM Radio You can search radio stations and enjoy listening to the radio. Note To improve the radio reception, extend the headset cord which functions as the FM antenna. You cannot use the FM radio without the headset. 1. In order to save/ add a station, tap the bottom middle bar then tap Menu and tap add. 2.
Page 85
Multimedia Camera 1. Press the key to enter camera capture mode directly. Or, tap the Multimedia icon, and then select Camera menu. pqrs wxyz 2. The picture and filename will be shown after the picture taken. You can automatically save the picture and return to preview by pressing or tap the button.
Choosing a Shot Type Normal shot: This is the default shot type, the photo will be taken in the normal way. Continuous shot: Continuous shot enables you to take three, six, or nine shots automatically in very quick succession. Panorama: This shot type is great for taking a photo of a large group of people or for capturing a panoramic view.
Multimedia Windows Media You can use Microsoft Windows Media Player 10 Mobile for Pocket PC to play digital audio and video files that are stored on your device or on a network, such as on a Web site. Using Windows Media Player, you can play both audio and video files. These are the following file formats that are supported by this version of Windows Media Player (WAV, WMA, WMV, MP3, MIDI,SP- MIDI, SMAF, AAC,AMR,3GP,MP4 etc).
Icon Description Plays/Pauses a file. Increases the volume level. Decreases the volume level. Skips to the beginning of the current file or to the previous file. Skips to the next file. Adjusts the playback progress of a selected file. Turns the sound on or off. Displays a video by using the entire screen (full screen).
Multimedia Library Screen The screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Video, My TV, and My Playlists. When you are viewing the Library screen, the following commands appear on Menu. Queue Up: Adds the selected item to the end of the current Now Playing playlist.
Page 91
Applications AT&T GPS The AT&T Navigator™ application on your device uses GPS position determination technology and access to your carrier’s data network to provide you with driving directions and a host of other services, including: GPS navigation that gives you turn-by-turn directions to any destination address in the continental United States.
Page 92
It could take 2~3 minute to get your GPS position depends on the condition of environment or network. How to Install AT&T Navigator. 1. Tap (LG Menu) > Applications > AT&T GPS 2. Tap Get AT&T Navigator 3. Browser will be launched and download page will be appeared. You can download and install AT&T...
Applications Launching AT&T Navigator 1. Tap (LG Menu) > Applications > AT&T GPS 2. Tap Tap AT&T Navigator Login After launching AT&T Navigator, Login screen will appear. Your phone number is automatically generated. Your phone number MUST be the same as your carrier phone number beginning with area code so that when you call the Voice Address Input System, you will not need to type it in.
AT&T Navigator Menu Overview This section gives you a brief overview of the AT&T Navigator menus. Main Menu The AT&T Navigator Main Menu options are: • Drive To • Directory • Maps • Extras Drive To Menu Use Drive To and select from a variety of ways to navigate to a chosen address. The Drive To Menu options are: •...
Applications Directory Menu The Directory menu provides you with a few different ways to find the addresses and phone numbers of businesses such as restaurants, motels, gas stations, churches, schools, government offices, and police and fire stations. You have the following options in the Directory menu: •...
Extras Menu The Extras menu gives you options for setting your preferences and other features. The Extras Menu options are: • Share Address – Share an address with friends on their mobile device. • Record Location – Record your current location via GPS. This option is useful when you do not know your exact current address or if you would like to mark an area without a street address.
Page 97
Applications 4. Click Yes on the Delete Application warning message. 5. Verify that the application is no longer available on the handset menu. Browser With Access Browser, your mobile device can display web site like PC. Default browser for your device is set to Access Browser.
Page 98
ActiveSync or Wi-Fi connection, please disable the Proxy setting on the device by going to (LG Menu) > Applications > Tools > Proxy Manager. To disable the Proxy setting, select 'Disable Proxy' and tap 'OK' on the Proxy Manager.
Applications Calculator The calculator function allows you to add, subtract, multiply and divide. You can input numbers using the number keys, and input operators using button keys. Voice Command Voice command is the function whereby your phone’s voice recognition engine identifies the voice of the user and carries out the requested commands.
Page 100
4. Messages: this command is activated when the user says the word “messages”. Mobile phone displays details of unread SMS or MMS messages. • commands available to user - yes: make phone call - no: moves next unread messages - cancel: go back to main voice command menu - exit: terminate voice command 5.
Page 101
To search for a file or an item 1. Tap (LG Menu) > Applications > Search. 2. In Search for, enter the file name, word, or other information you want to search for. 3. If you have looked for this item before, tap the Search for arrow and select the item from the list.
Sprite Backup allows to backup to SD Card, Main Memory, PC and FTP. For instructions on using the PC and FTP options, please view these sections. 1. Tap (LG Menu) > Applications > Sprite Backup. 2. Tap Backup. 3. From the Backup Data Selection screen you can customized the backup. You can add/remove items by simply enabling the the check boxes.
Page 103
Sprite Backup allows to Restore from Internal storage such as SD Card, Main Memory, PC and FTP. 1. Tap (LG Menu) > Applications > Sprite Backup. 2. Tap Restore. 3. Sprite Backup will search for all available backup files and display them in Open File screen.
Page 104
Sprite Backup allows to Schedule Backup operations to different storage locations such as SD Card, Main Memory, PC and FTP. 1. Tap (LG Menu) > Applications > Sprite Backup. 2. Tap Schedule. 3. Press the Next button to open the Backup Schedule screen.
Page 105
Applications Options Sprite Backup provides a number of options to help you manage your backup requirements. Backup Provides a number of options to help you manage your backup requirements. Restore Provides different restore options, these options are used to maximized the restore operation. In most cases you will get the best result by using the default option but depending on how complicated is the restore operation sometimes you will need to change these options to get the best result.
Note ActiveSync software version 4.5 or higher is required. Connect the USB cable to the PC. (LG Menu) > Applications > Internet Share. Set PC Connection to USB or Bluetooth PAN Set Network Connection to proper APN Tap Connect in the bottom line Data connection indicator (G/ E/ 3G) is displayed when PDP activation is performed successfully.
Applications Office Mobile Excel Mobile Excel Mobile makes it easy for you to open and edit Excel workbooks and templates created on your PC. You can also can create new workbooks and templates on your device. Note Work in full-screen mode to see as much of your workbook as possible. Tap View >...
Page 108
Formulas and functions. If an Excel file contains a function that is not supported by Excel Mobile, the function is removed, and only the returned value of the function appears. The following formulas are also converted to values: formulas entered as an array or containing an array argument, for example, =SUM({1;2;3;4});...
To start a slide show presentation 1. Tap (LG Menu) > Applications > Office Mobile > PowerPoint Mobile. 2. In the presentation list, tap the slide show you want to view. 3. Tap the current slide to advance to the next slide.
To create a file (LG Menu) > Applications > Office Mobile > Word Mobile. 1. In Word Mobile, tap New. 2. You’ll see either a blank document or template, depending on what you’ve selected as the default template.
Page 111
Applications Word Mobile does not fully support some features of Microsoft Word such as revision marks and password protection. Some data and formatting may be lost when you save the document on your device. The following features are not supported in Word Mobile. •...
The following features are not supported on the device; however, they are retained in the file so that when a file is opened on the PC again, they appear as expected. Footnotes, endnotes, headers, footers Page breaks: Word Mobile does not display breaks between pages. However, all page breaks except for breaks at the end of a document are retained in the document.
Writing as the default input mode. If you prefer typed text, select Typing. 1. Tap (LG Menu) > Applications > Notes. 2. In the note list, tap Menu > Options. 3. In the Default mode box, tap one of the following: Writing if you want to draw or enter handwritten text in a note.
To Create a Note 1. Tap (LG Menu) > Applications > Notes. In the note list, tap New. 2. Drawing mode is displayed. Tab the Input Method icon if you want to type the note. 3. You can record the voice by checking View Recording Toolbar from Menu.
Applications Java GM730f supports Java and hence you can easily download java games and other java applications from the internet. Mobile Java has 2 subfolders : Games and Applications. Each folder has an embedded link for downloading Games or Applications from the internet .
Page 116
Views Home view is used mainly as startup page where you learn and set some basic features of the application. First-Folder and Second-Folder views are double-folder views that have been designed to make copying, moving, extracting and archiving data an extremely easy task PassMan view is a password-manager view with some setting links that enable user to organize passwords in a single, master-password encrypted database Options view provides you with links to settings dialogs and other informative links...
You can see the PDF files. Proxy Manager Proxy Manager handles proxy usage for applications. (LG Menu) > Applications > Tools > Proxy Manager. - Restore Proxy: When you use Browser through GPRS, you should select 'Restore Proxy' and tap OK to enable proxy usage - Disable Proxy: When you use Browser through ActiveSync or WiFi, you should select 'Disable Proxy' and tap OK to disable proxy usage.
Page 119
Settings Phone You can edit the general settings related to making and receiving calls. Phone Sounds Ring type: This option determines the incoming call notification mode. You can select from [Ring], [Increasing ring], [Ring once], [Vibrate], [Vibrate and ring], [Vibrate then ring], [None]. Ring tone: You can select the ringtone for incoming voice calls.
Caller ID Scroll to ‘Everyone’ to display your caller identity to the people you call, ‘No one’ to hide it or ‘Only to contacts’ to display your caller identity when you call from the contacts. Call Forwarding Allows you to forward your incoming calls to another phone number. Call Waiting To be notified of incoming calls while you have a call in progress, select Notify me.
Settings Manual selection can be useful when you know that one network is less expensive than another or that it provides faster data transmission. Automatic: To have the network selected automatically. Preferred network Tap the Network tab > Set Networks (retrieving settings may take a few minutes). Select a network and re-priorities the order for network usage by tapping Move Up or Move Down.
To Synchronise the Today Screen 1. Tap (LG Menu) > Settings > Today. 2. On the Appearance tab, select the desired theme for the background of the Today screen. 3. On the Items tab, select the items you want to appear on the Today screen.
If you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen. 1. Tap (LG Menu) > Settings > Today. 2. Tap the Items tab. 3. Select Calendar(tap on the name Calendar) and tap Options.
To Set Sound & Notifications on Actions 1. Tap (LG Menu) > Settings > Sounds & Notifications. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate drop-down boxes. 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate drop-down boxes.
Settings Tap Wireless Manager in Today screen or (LG Menu) > Settings > wireless Manager. To turn on Wi-Fi, tap Wi-Fi. A bubble window pops up and shows scanned appropriate Access Points near users. You can select the Access Point that you are permitted to access and tap OK.
Page 126
If you tap Use specific IP address, you need to set IP address assigned by your WLAN service provider or network administrator. Fill in IP address, Subnet mask, and Default gateway. Tap Name Servers. Fill in DNS and Alt DNS, WINS and Alt WINS, if necessary. Note To prevent from the possible data loss of your phone, WLAN automatically ends when the battery almost runs out at the level of below five percent.
You create your own password when you begin using your device. To Protect your Phone with a PIN 1. Tap (LG Menu) > Settings > Phone > Security tab. 2. Tap Require PIN when phone is used. 3. To change the PIN at any time, tap Change PIN.
To Change your Password 1. Tap (LG Menu) > Settings > Lock. You will be prompted to enter your current password. 2. In the Password box, enter your new password. 3. On the Hint tab, enter a phrase that will help you remember your new password, but doesn’t allow others to guess your password.
You can view the time, day of the week and date. (LG Menu) > Settings > Clock & Alarms > Time tab. Tap the hour, minutes, or seconds, then tap the up or down arrow to change the time setting.
In most cases, programs automatically close to free needed memory, however, you can close programs manually, if you prefer. 1. Tap (LG Menu) > Settings > Task Manager. 2. You can check the running programs list on Application column and there Memory and CPU information.
Settings General Current profile: You can save the different bluetooth settings with different profile name. Bluetooth status: Bluetooth Turn On/Off. Accessibility Device Identification Name: The name displays on remote device while pairing process. Address: The bluetooth address is displayed. Accessibility Allow other devices to connect All devices/Paired devices only: You can select if other device can pair with yours or not.
When you turn on your device again, Bluetooth automatically turns on. To Make your Device Discoverable 1. On your device, tap (LG Menu) > Settings > Bluetooth. 2. Select the Turn on Bluetooth in General tab and Other devices can discover me check boxes in Accessibility tab.
Settings To Accept a Bluetooth Partnership 1. Ensure that Bluetooth is turned on and in discoverable mode. 2. Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establish a secure connection when prompted. The passkey must be between 1 and 16 characters. 3.
You can select the style of Today screen. To Select Clock Style 1. Tap (LG Menu) > Settings > Clock Style & Weather. 2. On the Clock tab, select the desired clock style. 3. You can set dual clock by tapping Dual Clock tab.
Settings ALC(Auto Luminous Control) Sensor If you set On, LCD backlight brightness is automatically adjusted base on the exterior light. Proximity Sensor Once the feature is turned On, the LCD will automatically turn off when in close proximity to your face, allowing you to only adjust the volume or end the call.
1. TTY Full: - Users who cannot talk and hear send and receive a text message through TTY equipment. 2. TTY Talk: - Users who can talk but cannot hear receive a text message and send voice messages through TTY equipment.
Page 137
Settings MDM (Mobile Device Manager) MDM enables your device to become managed and an authenticated member of the IT infrastructure of an organization To Enroll your Device in MDM. If you plan to enroll your device in MDM, obtain E-mail address, server URL and password from your system administrator before setting the enrollment.
2. In the connection list, select how your device is connected to the computer:USB if through USB cable connection. Note GM730f is Only USB support in Modem link. 3. To use your device as a GPRS modem, select the GPRS access point name from the Access point name list.
Page 139
Settings 4. Plug in the USB cable adapter between your device and the computer. 5. Tag Activate. 6. To add your device as a USB modem onto your computer, follow the steps in “To add your device as a USB modem to the computer.” To add your device as a USB modem to your Computer 1.
Page 140
7. Select Connect using a dial-up modem then click Next. 8. Select the modem that you previously installed, then click Next. Note If you have only one modem, this step does not appear. 9. Enter a descriptive name for this connection, then click Next. 10.
Settings Clear Storage Allows you to remove all your data and files from the memory and reset your device to factory default settings. Tap Start > Setting > System tab and select Clear Storage. After entering your password, press the Enter. Select the check boxes for the types of memory that you want to remove.