hit counter script
Sanyo LC-XB42N Owner's Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. LC-XB42N
  6. Owner's manual

Sanyo LC-XB42N Owner's Manual

Network set-up and operation for windows
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
Network Set-up and Operation
For Windows
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Network Viewer
Moderator Function
USB Display
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.

Advertisement

Table of Contents
loading

Related Manuals for Sanyo LC-XB42N

Summary of Contents for Sanyo LC-XB42N

  • Page 1 Owner’s Manual Network Set-up and Operation For Windows Wired and Wireless Setting Projector Set-up and Operation Network Capture Network Viewer Moderator Function USB Display This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions.

  • Page 2: Compliance

    Compliance This projector provides the wireless LAN module which complies with the module certification. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 3 The CE Mark is a Directive conformity mark of the The Alert Mark is a Directive conformity mark of the European Community (EC). European Community. Hereby, EIKI Deutschland GmbH declares that this WLAN Module (1AV4U19B25500) is in compliance English with the essential requirements and other relevant provisions of Directive 1999/5/EC. Česky EIKI Deutschland GmbH tímto prohlašuje, že tento WLAN Module (1AV4U19B25500) je ve shodě...

  • Page 4: Safety Instructions

    Safety instructions CAUTION IN USING THE PROJECTOR VIA NETWORKS ● When you find a problem with the projector, remove the power cable immediately and inspect the unit. Using the projector with failure may cause fire or other accidents. ● If you remotely use the projector via networks, carry out a safety check regularly and take particular care to its environment.

  • Page 5: Table Of Contents

    Table of contents Compliance .................................2 Safety instructions ............................4 Table of contents ...............................5 Operating environment and configuration .....................8 Required operating environment for computers ................8 Network specifications of the projector ....................9 Useful guide to the network function .......................10 1. About LAN functions ............11 LAN functions and the features ........................12 Image projecting system via LAN ......................12 An example of the connection .........................13...
  • Page 6 WIRELESS indicator display ........................45 Wireless LAN factory default settings ....................46 6. Basic setting and operation .........47 Starting up the Browser ..........................48 How to use the setting page ........................50 Initial setting ..............................52 Network configuration ..........................55 Configuring wireless LAN setting and security setting..............57 E-mail setting ..............................60 SNMP setting ..............................64 7.
  • Page 7 Using the Network Viewer function ......................124 Use of the projector as FTP server ......................130 10. Appendix ..............133 Use of telnet ..............................134 Web browser setting ............................136 Firewall setting ...............................141 Troubleshooting.............................142 Terminology..............................148...

  • Page 8: Operating Environment And Configuration

    Operating environment and configuration Required operating environment for computers When operating the projector via the networks, computers should meet the operating environment below. Microsoft Windows 2000 or Microsoft Windows XP or Microsoft Windows Vista (32bit version) Pentium 3 ; 1GHz or higher (more than 2GHz is recommended) for Windows 2000 or Windows XP Pentium 4 ;...

  • Page 9: Network Specifications Of The Projector

    Network specifications of the projector LAN Terminal Data communication speed 100Base-TX (100Mbps)/10Base-T (10Mbps) Protocol TCP/IP Wireless LAN Interface IEEE802.11b/g/n AdHoc, Communication Mode Infrastructure 1/2/5.5/11Mbps (IEEE802.11b) Data Transfer Speed 6/9/12/18/24/36/48/54Mbps (IEEE802.11g) Max speed 150Mbps (IEEE802.11n) Wireless Frequency (Channel) 2412MHz–2462MHz (CH1–CH11) IEEE802.11g OFDM 54/48Mbps 64QAM, 36/24Mbps 16QAM, 18/12Mbps QPSK, 9/6Mbps BPSK Modulation Form...

  • Page 10: Useful Guide To The Network Function

    Useful guide to the network function This manual describes the operation procedure of the projector’s network menu and the provided application software for Windows users. Please refer to this manual depending on the situation. ● How to project the computer screen’s image via the network To project the computer screen’s image via the network, you need to make a network setting in the projector and connect the projector to the network, or if you use the supplied USB memory, you can project the computer screen’s image via the network without making a network setting.

  • Page 11: About Lan Functions

    Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN.

  • Page 12: Lan Functions And The Features

    Chapter 1 About LAN functions LAN functions and the features This product is loaded with a LAN network function which enables you to project an image on the computer through a projector via Network with dedicated software. With the software, you can also manipulate the projecting image and the projector. This software has functions below and you can use the projector under various network environments to meet the wide-ranging needs of the operation.

  • Page 13: An Example Of The Connection

    An example of the connection An example of the connection The illustration below shows an example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . Computer (2) Computer (1) Access point...

  • Page 14: Lan Connection Modes

    Chapter 1 About LAN functions LAN connection modes Connection modes differ depending on the LAN and computer environments. Connect appropriately for each environment. Wireless LAN, Infrastructure Communication Mode ■ Communicate over an access point between Wired LAN equipment and Wireless LAN equipment. Or, communicate over an access point among multiple Wireless LAN equipment.
  • Page 15 LAN connection modes Wired LAN Communication Mode ■ Communicate via the LAN line. Computer(1) Computer(2) Computer (3) Operate the computer mouse with the remote control. ✳ When the projector’s remote control employs mouse operating function, you can operate the computer by the remote control. To use the remote control, point to the projector. You do not need to connect the USB cable to operate the computer mouse.
  • Page 16 Chapter 1 About LAN functions...

  • Page 17: Setup Procedures

    Chapter . Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks.
  • Page 18 Chapter 2 Setup procedures To use the projector via the networks, follow the setup procedures below. Install the software on computers. STEP 1 Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install. Select Wired LAN or Wireless LAN then connect the STEP 2 LAN and set the configuration.

  • Page 19: Installing The Software

    Installing the software Installing the software It is required to install the software into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer with Windows 2000, Windows XP or Windows Vista, you should logon as administrator.
  • Page 20 Chapter 2 Setup procedures As the "License Agreement" will appear, read contents carefully and click Yes button if you agree to the license agreement to proceed with installing. During the installation, following window may appear, click Continue Anyway button. Click Finish to complete the installation. Installed software The following 3 softwares are installed on your computer.
  • Page 21 Installing the software File Converter 2 installation Set the supplied Network Viewer & Capture 5 CD- ROM into the CD-ROM drive of your computer. SetupDrv.exe Double click icon in the "Driver" folder in the CD-ROM. Select "English [United States]" from the pull-down menu on the language selection window and then Install click...
  • Page 22 Chapter 2 Setup procedures Installation of Driver for USB display It is required to install the software into your computer to use the USB display function . Please install the software as follows. 1. Select “Display” in the “USB terminal” from the setting menu of the projector. 2.

  • Page 23: Names And Functions Of The Operation Screen

    Chapter . Names and functions of the operation screen This chapter describes the functions of each part of the operation screen.

  • Page 24: Network Connection Standby Display

    Chapter 3 Names and functions of the operating screen Network connection standby display Turn on the projector and select either “Wired” or “Wireless” from the input menu of the projector. The “Please wait... ” message will be displayed on the screen. After short time, the network connection standby display screen will appear as below.

  • Page 25: Network Capture 5 Window

    Network Capture 5 window Network Capture 5 window This software is to project the computer screen via the networks. Select "All Programs" from the start menu --> Network Viewer & Capture 5" --> "Network Capture 5", then following screen will appear. Then the program will start. Disable for this model Parts Names and Functions of the Screen...
  • Page 26 Chapter 3 Names and functions of the operating screen t Start communication button Enter the Communication mode, and then , the capture edit window starts. The selected projector shows the capture edit window. y Start real time capture button Capture (Project) the computer screen in real time. After the execution of "Start real time capture", the application window disappears.

  • Page 27: Wired Lan Configurations

    Chapter . Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment.

  • Page 28: Connecting To The Lan Line

    Chapter 4 Wired LAN configurations Setting procedures and contents differ depending on the LAN installation location. When installing, consult your system administrator to set up the LAN appropriately. Connecting to the LAN line Connect the shielded LAN cable to the LAN connection terminal of the projector. ACT Lamp (Orange) LAN Connection When the projector is...
  • Page 29 Network environment setting 4. Select "Network setting" in the Network menu and press SELECT button, and then the LAN setting screen will appear and selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator about the detailed settings. Move among the items with the Point ed buttons and press SELECT button, move among the columns with Point 7 8 buttons, adjust the figures with Point ed buttons, and then press SELECT button to set.

  • Page 30: Confirming The Operation

    Chapter 4 Wired LAN configurations Confirming the operation Confirm that the projector has connected to the LAN properly. 1. Activate “Network Capture 5” which is installed into the computer connected to the LAN . 2. After “Searching projector” message appears, the name of the projector* appears on the Network Projector List, then the network setting has completed properly.
  • Page 31 Confirming the operation When set up the projector in the location separated by the router and the segment is different; Projector will not be found nor displayed. In that case, the projector needs to be searched directly by the IP address. 1.

  • Page 32: Network Pin Code

    Chapter 4 Wired LAN configurations Network PIN code The Network PIN code is to restrict the access from the networks to the projector. After setting the Network PIN code, you need to enter it to operate the projector via the networks. 1.

  • Page 33: Wired Factory Default

    Wired LAN factory default settings Wired factory default Select “Wired factory default” in the Network menu and press SELECT button. All the wired LAN settings will go back to the factory default settings as shown below table. Wired LAN factory default settings SELECTED LAN Parameter Wired 1...

  • Page 34: Usb Display

    Chapter 4 Wired LAN configurations USB Display The image and sound are sent to the projector by connecting the computer to the projector with a USB cable. 1. Select “Display” in the “USB terminal” from the setting menu of the projector. 2.

  • Page 35: Wireless Lan Configurations

    Chapter . Wireless LAN configurations This chapter describes the preparation for Wireless LAN setting with projectors and how to set the LAN environment. This projector contains the Wireless LAN module. The setting procedures and configurations differ depending on the LAN installation location. Consult your system administrator for installation and set the LAN appropriately.

  • Page 36: Setting The Network Environment

    Chapter 5 Wireless LAN configurations Setting the network environment The projector contains the Wireless LAN adapter. Set the Wireless LAN network through the projector menu. Detailed network settings will be made with browser. Refer to “6. Basic setting and operation”. ➔ "Network configuration"...
  • Page 37 Setting the network environment 5. After completing all the settings, select “Set” and press SELECT button. Now, all procedures have been done. To cancel the adjusted settings, select the "Cancel" and press SELECT button. If you want to set the security, select "Next" and press SELECT button to proceed to the security setting window and refer to the following pages in detail.

  • Page 38: Configuring Security With The Projector

    Chapter 5 Wireless LAN configurations Configuring security with the projector Configure security with the projector by following the steps below. After configuring the network in “5. Wireless LAN Configurations” (p.35-46), select “Next” in the LAN setting screen and press SELECT button. The security configuration screen appears. Refer to “6. Basic setting and operation”...
  • Page 39 Configuring security with the projector Use of security type "WPS"(Wi-Fi Protected Setup) By using WPS (Wi-Fi Protected Setup), the communication via ESSID and WPA2 security type between the Wireless LAN access point and the projector can be configured without complicated setting procedures.
  • Page 40 Chapter 5 Wireless LAN configurations WPS PIN code 1. Select "WPS PIN code" in "Security" Menu, and press SELECT button. Use the Point ed buttons to select "Set" and "WPS PIN code" will appear by pressing SELECT button. WPS PIN code configuration screen 2.
  • Page 41 Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" security type. 2. Select “Key index”. Use the Point ed buttons to choose the HEX or ASCII key. The four (#1–#4) kinds of WEP keys can be configured.
  • Page 42 Chapter 5 Wireless LAN configurations Use of security type "WPA-PSK", "WPA2-PSK" 1. Use the Point ed buttons to select "WPA-PSK" security type. WPA-PSK(TKIP) configuration screen 2. Use the Point ed buttons to select the key field and press SELECT button. The PSK key entry screen appears.

  • Page 43: Easy Wireless Setting

    Easy wireless setting Easy wireless setting With this setting, you do not need any complicated LAN setting procedures. The network type will be AdHoc mode. CAUTION: This function can be used only when logged in by Administrative right with Windows XP and Windows Vista, and cannot be used with Windows 2000. Windows XP should be Service Pack 1 or later version.

  • Page 44: Network Pin Code

    Chapter 5 Wireless LAN configurations Computer environment and Wireless LAN connection; Wireless LAN with Wireless Easy setting connection will be made via AdHoc mode. For setting contents, refer to “Wireless LAN factory default settings” (p.46). With the Easy setting, computer’s LAN environment setting will be switched to the setup environment. Because of that, the LAN cannot work for the other operation while using “Network Capture 5”.

  • Page 45: Wireless Indicator Display

    WIRELESS indicator display WIRELESS indicator display When the wireless LAN configuration is set up correctly and the wireless communication is established with the access-point or computer in the network, the WIRELESS indicator on the front panel lights up. When sending or receiving of data, it blinks. Even though the wireless LAN in the network menu is selected, the WIRELESS indicator does not light, in this case, the wireless LAN configuration is not set up correctly, and please check the setting of the projector.

  • Page 46: Wireless Lan Factory Default Settings

    Chapter 5 Wireless LAN configurations Easy wireless setting Wireless LAN factory default settings Factory default settings for Wireless 4, Wireless 5, and Wireless Simple as follows. Selected LAN Setting Items Wireless 4 Wireless 5 Wireless Simple DHCP IP ADDRESS 169.254.100.100 192.168.100.100 169.254.

  • Page 47: Basic Setting And Operation

    Chapter . Basic setting and operation Describes basic operation and settings below by using the web browser. • Initial setting Setup the basic setting such as Projector name, Network PIN code, Time setting, etc. • Network setting Configure Wired/Wireless LAN environment. •...

  • Page 48: Starting Up The Browser

    Chapter 6 Basic setting and operation Starting up the Browser 1. Turn on the projector. 2. Start up the Network Capture 5. The Network Capture 5 searches projectors in the network and lists up the IP address or projector name of the projector on the Network Projector List. 3.
  • Page 49 Starting up the browser Display of main setting page The following main setting page will be displayed depending on your display mode selection. Perform various kinds of settings through this page. Click on the menus to display the control and setting pages.

  • Page 50: How To Use The Setting Page

    Chapter 6 Basic setting and operation x Main setting page in the Light Mode display Sub menu tab Page numbers Returns to the display mode selection Setting page Returns to main menu page. Main menu ✐ The blank page appears if your PDA does not provide a Adobe Flash Player.
  • Page 51 How to use the setting page Type of the setting pallet Text box setting Enter the number or text and then click Set button. C h a n g e a v a l u e w i t h s o r t button and then click Set button.

  • Page 52: Initial Setting

    Chapter 6 Basic setting and operation Initial setting After installing the projector, perform the following basic initial setting. Click Initial Setting on the main menu to display the initial setting page. Item Description Language ....Switches display language on the setting page. English or Japanese.
  • Page 53 Initial setting Network PIN code setting This is to set the Network PIN code to restrict the access from an unauthorized person through the network. Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector's network part begins restarting and it takes about 20 seconds.
  • Page 54 Chapter 6 Basic setting and operation Item Description NTP address ..... Enter the address of NTP server. Please consult your network administrator for setting up of the NTP server. Time zone ....Sets your country or region's time zone Temperature .... Switches display temperature unit Centigrade or Fahrenheit AUTO Time setting .....

  • Page 55: Network Configuration

    Network configuration Network configuration Click Network on the main menu. The following setting page is displayed. Set up the projector's network environment on this Setting sub menu. Setting of LAN 1. Select a type of LAN from Change setting pull down menu. LAN1(Wired) LAN2(Wired) LAN3(Wired)
  • Page 56 Chapter 6 Basic setting and operation 2. Select either "Manual" or "DHCP" from IP configuration pull down menu. When "DHCP" is selected, IP address, Subnet mask, Default Gateway, DNS are automatically configured by DHCP function. Only the DNS address allows you to set up manually if the DNS address information is not provided on your DHCP server.

  • Page 57: Configuring Wireless Lan Setting And Security Setting

    Configuring wireless LAN setting and security setting Configuring wireless LAN setting and security setting Configure the wireless LAN setting and security setting for Wireless 4 and Wireless 5. Configuring wireless LAN setting 1. Click page [2] of setting pages. Following wireless LAN setting can be done. After completing the configuration, press Set button.
  • Page 58 Chapter 6 Basic setting and operation Configuring wireless LAN security setting Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the configuration, press Set button. Item Description Network security ...Sets the type of encryption. Following types are available. Disable WPS Push Button WPS PIN code...
  • Page 59 Configuring wireless LAN setting and security setting Setting of WPS Push button 1. Select “WPS Push Button” in the “Network security” and press Set button to start WPS configuration. 2. Configure WPS of the access point within 2 minutes. After configuration of the access point, the network between the access point and the projector will be performed automatically.

  • Page 60: E-Mail Setting

    Chapter 6 Basic setting and operation E-mail setting This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp.
  • Page 61 E-mail setting Setting SMTP authentication Set the SMTP authentication concerned. Please contact your network administrator in details. Item Description SMTP authentication setting Auth ...... Sets authentication setting option. (OFF, SMTP Auth, POP before SMTP) SMTP Auth ..Sets user authentication setting option when selecting "SMTP Auth"...
  • Page 62 Chapter 6 Basic setting and operation Option selection for sending alert mail Option Click Option sub menu tab. Check the condition items under which alert mail will be sent and click Set button. Please refer to the item "Examples :Type and contents of alert mail"...
  • Page 63 E-mail setting ● When PJ needs service:: TITLE: Message from projector 10-03-2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. * Maintenance requirement from Projector is detected. Check up LED status of projector and consult with the dealer. MAIN, P-FAIL MAIN,...

  • Page 64: Snmp Setting

    Chapter 6 Basic setting and operation SNMP setting This product provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists of a manager and agents. The group which exchanges information with SNMP is called "Community". There are two access modes in a community, Refer (read only) and Set (read- write).
  • Page 65 SNMP setting Trap Item Description Community name ... Enter community name to send "Trap". Default name is "public". Trap address .... Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 address can be registered. ✐ Up to 10 trap addresses can be registered. Trap check/delete Check and delete the trap address Checking the registered trap address and deleting the address.
  • Page 66 Chapter 6 Basic setting and operation Trap option Trap option setting Tick the check boxes in front of the condition item to send the trap. ✐ Click button if you tick or un-tick the check box on a page. [1]–––––––––––––––––––––––––––––––––– When PJ lamp is off.

  • Page 67: Controlling The Projector

    Chapter . Controlling the projector Describes controlling and setting of the projector by using the web browser.

  • Page 68: Power Control And Status Check

    Chapter 7 Controlling the projector Power control and status check Click Power & Status on the main menu. The control page will be displayed. By clicking ON or Standby button on the page, the power of the projector can be controlled.
  • Page 69 Power control and status check About projector condition Status Description Normal ..............Projector is operating normally. Power management in operation ......Power management is operating Lamp failure............Lamp failure is occurring Abnormal Temperature ........The temperature of the projector became too high Cooling down after abnormal Temp. Projector detects abnormal temp.

  • Page 70: Controls

    Chapter 7 Controlling the projector Controls Click Control on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further informa- tion of each control item.
  • Page 71 Controls System This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a system and then click Set button. Available selection at the RGB(PC analog) input Item Description XGA1 ......
  • Page 72 Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button. Item Description Contrast.....Adjusts picture contrast Brightness ....Adjusts picture brightness Color ......Adjusts picture color saturation...
  • Page 73 Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume ...... Adjusts the sound volume from the speakers. Mute ......Suppresses the sound.

  • Page 74: Pc Adjustment

    Chapter 7 Controlling the projector PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode ... Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc.

  • Page 75: Setting Up The Projector

    Setting up the projector Setting up the projector Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen ......
  • Page 76 Chapter 7 Controlling the projector Item Description Language ....Sets the language display of projector's on-screen display menu. Auto setup ....Executes the Auto PC Adj, and Input Search function below according to the each setting after clicking Start button. Auto PC adj.
  • Page 77 Setting up the projector Item Description Fan ......Sets the cooling options after turning off. L1 Normal cooling L2 Silent cooling Fan control ....Sets the fan control speed. Off Normal mode On1 Highland mode 1 On2 Highland mode 2 On3 Highland mode 3 Lamp Corres.

  • Page 78: Timer Setting

    Chapter 7 Controlling the projector Timer setting This page is to set the timer to turn the projector off or on at a programmed day/date and time. Follow the steps below for setting. Click Timer on the main menu. "---" will appear on the cur- Present time set on the rent time when the time is projector...
  • Page 79 Timer setting Set an execute time Type the time with (Hour:Minute) and 24 hours format. Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes]. Select an event action Select an event action from the pull-down menu. Event Action ON ........
  • Page 80 Chapter 7 Controlling the projector Notes on timer setting ✐ Up to 10 timer events can be registered. Timer events always operate according to the next valid event depending on the projector's power status. In the example below, event 3 turns on the projector so next event 4 (also turning on projector) will not be effective because the projector is already turned on.

  • Page 81: Projector Information

    Projector information Projector information This page is to display the basic information of the projector status. Click Information on the main menu. Items Description Input ......Displays selected input and source. System .......Displays selected signal system. Signal ......Input signal status Screen ......Displays screen mode. Lamp status ....
  • Page 82 Chapter 7 Controlling the projector Indication of the lamp status Icon display/background Status Lamp on (Normal) White-Yellow/Blue Lamp on (Lamp is being used over a specified use time, replace lamp immediately) White-Yellow/Red Lamp off (Normal) Gray/Blue Lamp off (Lamp is being used over a specified use time, replace lamp immediately) Gray/Red Lamp failure (Lamp failure, check the lamp condition) Red/Blue with X...

  • Page 83: Multi-Control

    Multi-control Multi-control Controlling and setting the multi-projectors When you install multiple projectors in the network, you can control and set up them together. Click Multi Control on the main menu to display the control page. Note: To control the multiple projectors, each projector must be set the same Network PIN code. Example of multi control Select Input2 for PJ1 to PJ4.
  • Page 84 Chapter 7 Controlling the projector Start/stop the multi control Switches on and off the multi-control function To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF. Multi control setting OFF ..Stops multi control function ON ....
  • Page 85 Multi-control Register the projector To use the multi control function, register the IP address of the projector you intend to control. Click Pj registration sub menu tab and set the IP address, Memo and Multi control item, then click Set button. Items Description IP address ....Enter IP address of the projector to control...
  • Page 86 Chapter 7 Controlling the projector Change the mode of the registered projector To change the mode of the registered projector, select a mode with the pull-down menu button under the IP address of the target projector and then click Set button. Mode Operation Control .......
  • Page 87 Multi-control Check & Change page in the light mode Following functions in the "Check & Change" page are not available in the light mode. - Changing the control mode. - Deleting the registered IP address - Indicating the each status - Indicating the each memo This indicates that the mode is "Image".
  • Page 88 Chapter 7 Controlling the projector Viewer auto setting all together "Viewer auto display" can be set all together. Set "ON" the multi control setting and select [3] Auto display from Viewer sub menu (selected by ‘Multi-control’ - “Network Viewer” menu). Set the display time periods and repeat times for the auto image display.

  • Page 89: Network Capture Functions

    Chapter . Network capture functions Network Capture is a function to display the screen image and reproduce the sound of the computer via the network. - Real Time Capture - Network Communication - Moderator Function...

  • Page 90: About Network Capture Function

    Chapter 8 Network capture functions About Network Capture function The Network Capture is a function to display the screen image and reproduce the sound of the computer which has a Network Capture 5 software by the projector through the network. This function has 3 kinds of mode as below.
  • Page 91 About Network Capture function Commands on the task bar When the Network Viewer & Capture 5 icon on the task bar is clicked, the popup menu will appear. It provides according to the operating modes as shown in the table below. Menu during Real time capturing One-shot executing Real time capture executing...
  • Page 92 Chapter 8 Network capture functions Parameter set up Click Parameter set up button and setup the parameters on the Parameter setup window. Items Description Connection setting Capture port ....Sets the capture port no. on the projector. Default is 9000. Pincode ......

  • Page 93: Using The Real Time Capture

    Using the Real Time Capture Using the Real Time Capture This is a function to project the screen image and reproduce the sound of the computer by the projector in real time. The captured image projected by the projector can be selected from the computer, web browser and the projector respectively.
  • Page 94 Chapter 8 Network capture functions [1] Control by the computer * PC provides the Network Capture. Project this screen image with PJ2. Capture * Start capturing from the PC1. Select input mode to "Network" previously. Start up Network Capture 5. Select the projector(s) listed on the projector list on the application window and click Start real time capture.
  • Page 95 Using the real time capture [2] Control by the web browser * PC provides the Network Capture. Capture * Star t capturing of t h e P C1 f r o m t h e Project a screen PC5. image of PC1 with PJ2.
  • Page 96 Chapter 8 Network capture functions [3] Control by the projector * Star t captur ing of t h e P C 1 f r o m t h e projector PJ2. * PC provides the Network Capture. Capture Project a screen image of PC1 with PJ2.
  • Page 97 Using the real time capture [4] Control by the computer with USB memory * Start capturing of the PC1. Project this screen image with PJ1. ＊USB memory provides Auto Capture program. The real time capture function can run automatically on the computer without the Network Viewer &...

  • Page 98: Using The Network Communication

    Chapter 8 Network capture functions Example of advanced use Displays the presentation data stored in the computer by using the wireless mouse function from the projector. Start capturing of the computer PC1 by using the projector. Select “Network Capture” icon from the menu and select "PC1" and then select "Connect" (+ p.96). =>...
  • Page 99 Using the Network Communication Capture Capture a screen image of PC5 and make marking with a tool. * The Main PC is a computer which started using communication function, and serves own computer screen captured image to the Sub PC. The Main PC has an authority to quit using whole communication.
  • Page 100 Chapter 8 Network capture functions Description of capture editing window Start Network Capture 5 and select the projector(s) on the projector list on the application window and click Communication Start button. The application window will disappear and the capture editing window will appear on the computer screen as below.
  • Page 101 Using the Network Communication Tool bar button names The following commands are assigned to the tool bar buttons. For each operation, refer to the description of the item "Menu tree". Command Tool Save Bar of Main PC Terminate Communication communication Capture Authority Attribute...

  • Page 102: How To Use The Network Communication

    Chapter 8 Network capture functions How to use the Network communication Start the communication Display an image on the computer screen. Start Network Capture 5. The application window appears and the projectors in the network are listed. Select the projector(s) and click Start Communication button. The application window disappears and the capture editing window with a captured image appears on the computer screen.
  • Page 103 How to use the Network communication Edit capture image Drawing figures Click " :Pencil" button on the form tool bar. Select its attribute (shape, width, color and translucence) from the form and attribute tool bar. Drag a mouse pointer on the screen image to draw the figure. Erase drawn objects Click "...
  • Page 104 Chapter 8 Network capture functions Drawing letter Click " :Letter frame" button on the form tool bar. Select a color of text with color tool bar. Drag a mouse pointer on the screen image to specify the area of the letter frame. The letter input dialog window will appear.

  • Page 105: Network Communication Operation And Change Of State

    Network Communication operation and change of state Network Communication operation and change of state Network Communication can be used under the environment which one or more computers are connected to the projector via the network. Preparation Start up the Network Capture 5 software on the subject computer. Set standby the projector or turn it on.

  • Page 106: Executing The Forcing Mode

    Chapter 8 Network capture functions Executing the forcing mode The network capture setting of the web page provides a forcing executing command. This command executes the release of authority or ending the communication forcibly. This is useful when the other subject PC keeps an authority all the time, or when the condition of the communication is not stable.

  • Page 107: Moderator Function

    Moderator function Moderator function This function is useful for a moderator or a teacher to conduct a meeting or a class, where all the participants including the moderator (teacher) are assigned a computer, to project images from each participant’s computer. A moderator (teacher) has the right to decide which computer image should be projected.

  • Page 108: Preparation For Using The Moderator Function

    Chapter 8 Network capture functions Preparation for using the moderator function First, follow the procedure in “2. Setup Procedure” ➔ “Step 1–3” (p.18) and confirm that the setting status is set as written below. • Network Capture 5 is installed on the moderator's computer and each client’s computer and each computer image can be projected.

  • Page 109: Using The Moderator Function

    Moderator function Description of application window Column Description Status ......Indicates the projector's condition. On real time, On One-shot capture, On Standby, In Moderator mode, etc. User......Indicates the client name (nickname or IP address) used by the projector. Error ......Indicates the error status during executing the real time capture or one-shot capture. Parameter set up ...

  • Page 110: Moderator's Password Setting Up

    Chapter 8 Network capture functions Moderator's password setting up This enables you to set up the password to join in the moderator's group. Parameter set up Start up the network Capture 5 and click button on the application window. On the moderator Moderator 's password function setting item on the parameter set up window, set up the password of .

  • Page 111: Error Information

    Error information Error information Error messages Cause and corresponding Error when the communication is executed. The parameter setting (host Set up the parameter. name, capture port) has not been set. ➔ Check parameter setting (+p.92) Error when Start Communication or Start real time capture is executed. The It has not been registered to PJ as a IP address of the computer has not been registered.
  • Page 112 Chapter 8 Network capture functions...

  • Page 113: Network Viewer Functions

    Chapter . Network Viewer functions Network Viewer is a function to display the image data stored in the file servers by the projector through the network. Describes the file converter software File Converter 1, File Converter 2, the program creator software Program Editor, and how to use Network Viewer.

  • Page 114: Creating The Available Data [Network Viewer 5]

    Chapter 9 Network Viewer functions Creating the available data [Network Viewer 5] The image available with this projector is the JPEG format (.jpg). There are several types of JPEG data. Some data may not be projected. Before using the images with the Network Viewer function, it should be converted to the optimized JPEG data for this projector.
  • Page 115 Create the available data Menu Tree Menu Sub Menu Description View Update Updates contents of the preview window Preview size Sets size of the preview image, Large, Middle, Small Tools Option Sets default of the output destination and conversion mode Conversion Convert each file Converts a file into a JPEG file individually...
  • Page 116 Chapter 9 Network Viewer functions When converting each file, select a preview image first and then click Convert each file. ✐ To select two or more files at once, press and hold "Shift" key or "Ctrl" key and then click the preview images. When converting all the files in a folder, select a folder and click Convert a folder.
  • Page 117 Creating the available data [Network Viewer 5] Setting of output destination and conversion mode When clicking Change button on the confirmation window in the step 3 on the previous page, following option setting window appears. Output destination Select either Folder or FTP server as the output destination of the converted files.
  • Page 118 Chapter 9 Network Viewer functions [2] How to use the Network Viewer 5 (File Converter 2) The File Converter 2 is a kind of the printer driver software to convert to the optimized JPEG data for the projection from the any documents created by the other software such as text editor, spreadsheet or presentation software.

  • Page 119: Creating A Program File [Program Editor]

    Creating a program file [Program Editor] Creating a program file [Program Editor] Network Viewer 5 (Program Editor) is a tool to make a program file which specifies the display order of the images and its file path in the file server (FTP server). The Program Editor creates a folder "DispParam"...
  • Page 120 Chapter 9 Network Viewer functions Click New button. Enter a program name and click Add button. Change : Changes the contents of the program file. Remove : Removes the program from The folder selection window appears and select a folder in the list.
  • Page 121 Creating a program file [Program Editor] Setting up the display order and time of the images In the default setting, the display order of the images is the same as ASCII code order of the file name. To change the display order or to set up the display time, take the following procedures. Display the folder list window in step 6 of the previous page.
  • Page 122 Chapter 9 Network Viewer functions To change the display order, select* files and then click UP or DOWN button on the menu bar to move them onto your desired place, or select files and then drag and drop them onto your desired place with mouse.
  • Page 123 Creating a program file [Program Editor] Example of the created program selection Use the web browser to access to the control page of the projector. Click "Viewer" of the Network menu on the web page, then connect to the FTP server and select the program name which was made at previous section.

  • Page 124: Using The Network Viewer Function

    Chapter 9 Network Viewer functions Using the Network Viewer function The Network Viewer is a function to acquire the JPEG image data from the file servers placed in the network and project them on the screen. The projected image data are specified by the folder unit. You can set the display time and the number of repeat, and also you can register those folders as the *The network viewer function cannot be used when the network capture function is program.
  • Page 125 Using the network viewer function Setup the setting page [1] of the Visual display. Item Description Host name ....Enter the host name or IP address of FTP server, yourftp.server etc. Folder Path ....Use "/"(root directory) normally, or enter the directory name follow the "/"...
  • Page 126 Chapter 9 Network Viewer functions After clicking Set, the file list or preview list of the selected folder or program is displayed on the window. Decides a image to start auto display with Selects a page radio button The original image is displayed on another window by clicking on the preview image or file name Button...
  • Page 127 Using the network viewer function Auto Display setting and control page [] Repeat times (0 to 255 times) * 0 means endless play Display time* of the image (3 to 240 sec.) Click here to check the further information of the file error ✐...
  • Page 128 Chapter 9 Network Viewer functions Error information Error type Description File Error It is displayed when the projector cannot acquire the correct file images from the FTP server, or when the master projector is turned off during the multi-control. Click Error button to check the details. Connection Error It may be displayed when the slave projector is using the Network Viewer or Capture function during the multi-control.
  • Page 129 Using the network viewer function Display length Repeat times Select "Display mode" and press SELECT button, and then select "Auto" or "Manual" and then press SELECT button. When selecting "Auto", set "Display length", "Endless play" and "Repeat times" Select "Connect" and then press SELECT button to start displaying. The images in the FTP server are displayed on the screen.

  • Page 130: Use Of The Projector As Ftp Server

    Chapter 9 Network Viewer functions Use of the projector as FTP server You can use the projector in which a USB memory is inserted into the USB terminal as an FTP server. By using it as an FTP server, you can save the projection data that is converted by Network Viewer 5 [File Converter1, File Converter2] on the USB memory, and project the data with the Network viewer function in this projector or the other projectors.
  • Page 131 Use of the projector as FTP server Output the converted file directly to the projector with the USB memory. The file converted by Network Viewer 5 [File Converter 1] can be output directly to the projector with the USB memory. Refer to the "Creating the available data" for details of Network Viewer 5 [File Converter 1].
  • Page 132 Chapter 9 Network Viewer functions...

  • Page 133: Appendix

    Chapter 10. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology...

  • Page 134: Use Of Telnet

    Chapter 10 Appendix Use of telnet You can control the projector by using the telnet application installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of the Windows XP Professional.) 1.
  • Page 135 Use of telnet 4. Type the commands, refer to below table, to control the projector and then press "Enter" key for termination. For example, type "C00" which is a command to turn on the projector, and press "Enter" key. Confirm the projector is turning on. Enter with ASCII 64-byte capital characters and one-byte characters.

  • Page 136: Web Browser Setting

    Chapter 10 Appendix Web browser setting This product is designed to enable the projector to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available.
  • Page 137 Web browser setting Examples: OS/Browsers Windows XP Professional Internet Explorer v..0 ActiveScript setting Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level… button. On the security setting window, scroll down and find the Scripting item, make sure that "Enable"...
  • Page 138 Chapter 10 Appendix Flash Player Add-on setting Select Manage Add-ons... from Tools menu on the web browser. Select "Add-ons currently loaded in Internet Explorer" from Show pull-down menu. Make sure that the "Shockwave Flash Object" is listed under the item "Enabled". Proxy setting Select Internet Options from Tools menu on the web browser and then select Connection tab and click LAN Settings button.
  • Page 139 Web browser setting Netscape Navigator v..0 JavaScript Setting S e l e c t P r e f e r e n c e f r o m E d i t menu on the web browser and then select the item Advanced/ Scripts &...
  • Page 140 Chapter 10 Appendix Proxy setting Select from menu on the web browser and then select the item Preference Edit Advanced/ in the column. Properly set up your web browser's the proxy server settings Proxies Category according to the local area network environment to which the projector is connected. - Using proxy server When you use an external internet connection from the local area network, select the item .

  • Page 141: Firewall Setting

    Firewall setting Firewall setting If you use Windows XP SP2 or Windows Vista and using Network Capture 5, you may see the Windows security warning dialog as below. In that case, click "Cancel the block" button on the dialog to enable the function of Network Capture 5.

  • Page 142: Troubleshooting

    Chapter 10 Appendix Troubleshooting If you have any trouble in setup or operation of the projector, refer to the troubleshooting items and check the relevant matters described. ■ The computer cannot connect projectors. Wired LAN Is the LAN cable connected to the projector properly? Is the LAN setting of the projector set “On”? See “Wired LAN setting”...
  • Page 143 Troubleshooting Infrastructure Mode: When selecting Wireless 5 (factory default setting) Check each item below in the Wireless Setting menu of the projector as follows: *IP Address ......No setting is required. *Sub net ........Should be the same as the setting of the access point *Gateway .........
  • Page 144 Chapter 10 Appendix ■ Although the connection between PC and the projector is established, images are not pro- jected on the screen. Make sure Wireless/Wired is selected from the Input source menu of the projector. ■ Cannot be turned on/off with the web browser. Make sure the settings of the projector are correct to use the projector with it.
  • Page 145 Troubleshooting ■ Projector does not reproduce the computer's sound during the real time capturing. To reproduce the sound in the projector correctly, follow the procedures below; • Start up the real time capture and then start up the movie player software. •...
  • Page 146 Chapter 10 Appendix File Converter 1 ■ What kind of image formats can I convert? The File Converter 1 makes it available to convert into the JPEG format from the following image formats. Bitmap format (.bmp) JPEG format (.jpeg .jpg) Microsoft power point format (.ppt) File Converter 2 ■...
  • Page 147 Troubleshooting Auto Capture ■ I have deleted the AutoCapture program file on the supplied USB memory. I want to perform the AutoCapture with a commercially available USB memory. To perform AutoCapture, you should have all files and folders of "Auto Capture" folder on ‘Network Viewer &...

  • Page 148: Terminology

    Chapter 10 Appendix Terminology DHCP server (Dynamic Host Configuration Protocol) It is necessary to set an IP address for each computer or equivalent equipment when a network is established by TCP/IP. If there exists DHCP server on the network, it will assign IP addresses to client computers every time they request it.
  • Page 149 Terminology Wi-Fi Alliance (Formerly Name: WECA (Wireless Ethernet Compatibility Alliance)) It is an organization that aims to promote the spread of Wireless LAN, and it guarantees the interoperability of products that meet the Wireless LAN standard. WPS (Wi-Fi Protected Setup) It is a standard to easily perform security of the wireless LAN which Wi-Fi Alliance devised.
  • Page 150 U.S.A. Canada EIKI International, Inc. EIKI CANADA - Eiki International, Inc. 30251 Esperanza P.O. Box 156, 310 First St. - Unit 2, Rancho Santa Margarita Midland, ON, L4R 4K8, Canada CA 92688-2132 Tel : 800-563-3454 (705)-527-4084 U.S.A. Fax : 800-567-4069 (705)-527-4087 Tel : 800-242-3454 (949)-457-0200 E-Mail : canada@eiki.com...

This manual is also suitable for:

Lc-xb200

Table of Contents