hit counter script
Epson EB-L25000unl User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB-L25000unl
  6. User manual

Epson EB-L25000unl User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EB-L25000unl

Summary of Contents for Epson EB-L25000unl

  • Page 1 User's Guide...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. The indications and their meaning are as follows. Make sure you understand them properly before reading the guide. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
  • Page 3 Safety Warning and Cautions Make sure you read the following before you use the projector. Warning Safety Instructions • Be careful when handling the power cord. Otherwise, it could cause a fire or electric shock. Note the following when handling the power cord. Warning and Cautions on Installation - Do not plug multiple power cords in a single electric outlet.
  • Page 4 Safety Warning and Cautions Attention Attention • Note the following points when installing a projector directly on top of • Do not install the projector in a location that is subject to vibration or another. shock. - Do not stack three or more projectors. •...
  • Page 5 Epson Projector Contact List. If you continue using the • You can remove the feet from the projector and attach them to the projector as it is, it could cause an electric shock, fire, or even damage to carrying handle.
  • Page 6 Safety Warning and Cautions • About the LCD panel Attention • When you purchase the projector, a protective cap is installed in the lens unit - The LCD panel may contain pixels that are missing or appear bright all the time. This is not a sign of an error. installation section.
  • Page 7 Safety Warning and Cautions Warning and Cautions on the Laser Caution • This projector is a Class 1 laser product that complies with the IEC60825-1 Warning international standard for lasers. • Do not disassemble the projector when disposing of it. Dispose according to •...
  • Page 8 Safety Warning and Cautions Notes on Carrying and Transporting There are many glass parts and precision components inside the projector. To prevent damage due to impacts when carrying and transporting, handle the projector as follows. Before carrying or transporting, make sure you read the supplied Transport and Installation Handbook.

  • Page 9: Table Of Contents

    Contents Setting the remote control ID ........38 Notations Used in This Guide .
  • Page 10 Contents Changing methods ......... . 71 Freezing the Image (Freeze) .
  • Page 11 Contents Basic menu ..........131 Interference or distortion appear in images .
  • Page 12 Supported Resolutions ......... 217 Displaying the Epson Web Control Screen ......188 Computer signals (analog RGB) .

  • Page 13: Introduction

    Introduction This chapter explains the names for each part.

  • Page 14: Part Names And Functions

    Part Names and Functions Unless otherwise mentioned, the illustrations used in this guide show the Name Function projector with the lens unit (ELPLM12) installed, Lens replacement Remove when attaching or removing the lens. cover s "Removing and Attaching the Projector Lens Unit" p.25 Front/Top Caution...

  • Page 15: Rear/Side

    Part Names and Functions Name Function Rear/side Air intake vent Takes in air to cool the projector internally. Be sure to (air filter) clean the air filter regularly. s "Cleaning the Air Filter" p.175 s "Replacing the Air Filter" p.179 Installs the optional handle.

  • Page 16: Interface

    Part Names and Functions Name Function Interface Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. s "Anti-Theft Lock" p.113 s "Interface" p.16 Interface s "Control Panel" p.17 Control panel You can remove these from the projector and attach them Feet to the optional handle.

  • Page 17: Control Panel

    Part Names and Functions Name Function Name Function Remote port Connects the optional remote control cable set and inputs LAN port Connects a LAN cable to connect to a network. signals from the remote control. When the remote control The projector supports Art-Net. When using Art-Net to cable is plugged into the Remote port, the remote receiver control the projector, set Art-Net to On from the Network on the projector is disabled.
  • Page 18 Part Names and Functions Name Function Name Function [Auto] button If pressed while projecting analog RGB signals from the Displays the Control Panel Lock screen allowing you to ] button Computer port or the BNC port, you can automatically make settings to lock the control panel buttons. optimize Tracking, Sync., and Position.

  • Page 19: Remote Control

    Part Names and Functions Name Function Remote Control Turns the projector on. ] button [t] button Turns the projector off. Change input buttons Changes to images from each input port. s "Switching to the Target Image" p.54 Select any frequently used item from the Configuration [User1] button [User2] button menu items, and assign it to any of these buttons.
  • Page 20 Part Names and Functions Name Function Name Function • Adjust the lens shift. [ID] button Hold down this button and press the numeric buttons to ][ ][ ] s "Adjusting the Position of the Projected Image select the ID for the projector you want to operate using buttons (Lens Shift)"...

  • Page 21: Handy Remote Control Operations

    Part Names and Functions Handy remote control operations Name Function • Stops the current function. [Esc] button You can perform the following operations by simply pressing one of the • If pressed when the Configuration menu is displayed, it buttons on the remote control. moves to the previous level.

  • Page 22: Replacing The Remote Control Batteries

    Part Names and Functions Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries.

  • Page 23: Remote Control Operating Range

    Part Names and Functions Remote control operating range • When the remote control cable is plugged into the Remote port, the remote receiver on the projector is disabled. • You can also connect the optional HDBaseT transmitter and remote control with the cable to control the projector. s "Connecting an HDBaseT Transmitter"...

  • Page 24: Preparing The Projector

    Preparing the Projector This chapter explains how to install the projector and connect projection sources.

  • Page 25: Installing The Projector

    Installing the Projector Removing and Attaching the Projector Lens Unit Attaching Attention • When attaching the lens unit, remove the power plug from the electrical outlet first. • Do not attach the lens unit when the projector's lens insertion section is facing up.

  • Page 26: Lens Calibration

    If the message "Lens Calibration failed." is displayed, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List •...

  • Page 27: Removing

    Installing the Projector Removing Attention When replacing the lens unit, remove the power plug from the electrical outlet first. If the lens shift has been done, move the lens position to the home position before replacing the lens unit. s "Adjusting the Position of the Projected Image (Lens Shift)" p.31 The projector uses a laser as the light source.

  • Page 28: Screen Settings

    Installing the Projector When Front is the standard, the image directions for each projection mode Screen Settings are as follows. Set the Screen Type according to the aspect ratio of the screen being used. Front (default) Front/Ceiling The area where the image is displayed matches the shape of the screen. The setting for the Screen Type at the time of purchase is 16:10.

  • Page 29: Adjusting The Position Of The Image On The Projected Screen

    Installing the Projector Use the [ ], [ ], [ ], and [ ] buttons to adjust the position of • When you change the Screen Type, adjust the aspect ratio for the the image. projected image as well. s "Changing the Aspect Ratio of the Projected Image " p.71 You can check the current display position by using the background •...
  • Page 30 Installing the Projector Top Menu Name Sub Menu/Items Press the [ ][ ] buttons on the remote control or the [ ] button on the control panel to change the test pattern. Advanced - Gamma p.74 Using the remote control Using the control panel - RGBCMY s p.73...

  • Page 31: Adjusting The Position Of The Projected Image (Lens Shift)

    Installing the Projector Adjusting the Position of the Projected Image When using the ELPLU05/ELPLL09/ELPLL10 (Lens Shift) The lens can be shifted to adjust the position of the projected image, for example, when the projector cannot be installed directly in front of the screen.
  • Page 32 Installing the Projector When using the ELPLW07/ELPLM12/ELPLM13/ELPLM14 • When adjusting the image height with the vertical lens shift, adjust by moving the image from the bottom to the top. If it is adjusted from the top to the bottom, the image position may move down slightly after adjusting.

  • Page 33: Adjusting The Image Size

    Installing the Projector Press the [Zoom] button on the control panel. Press the [ ][ ][ ] buttons to adjust the position of the projected image. Using the remote control Using the control panel Press the [ ][ ] buttons to adjust. The displayed screen may differ depending on your lens.

  • Page 34: Correcting The Focus

    Installing the Projector • You can also use the [Focus] buttons [+] [-] on the remote control Correcting the Focus to adjust the focus. • When projecting from several projectors and there is a difference in Press the [Focus/Distortion] button on the control panel. brightness, we recommend displaying the grayscale test pattern and Press repeatedly until the focus adjustment screen is displayed.

  • Page 35: Registering And Loading Lens Adjustment Values

    Installing the Projector You can also adjust distortion in images using the remote control. After adjusting the focus at the center of the image using the [Focus] button [+] [-], use the [Distortion] button [+] [-] to adjust the surrounding image. Registering and Loading Lens Adjustment Values You can register a lens position whose lens shift, zoom, focus, and distortion was adjusted in memory, and load it when necessary.
  • Page 36 Installing the Projector Select Lens Position, and then press the [ ] button. Function Explanation Loads the saved memory. When you select a Load Memory Select the function you want to perform, then press the [ memory name and press the [ ] button, the lens button.

  • Page 37: Id Settings

    • IDs are ignored when the projector ID is set to Off or the remote on the remote control. control ID is set to 0. • If you use Epson Web Control, you can operate a specific projector from a mobile device. s "Changing Settings Using a Web Browser (Epson Web Control)"...

  • Page 38: Setting The Remote Control Id

    Installing the Projector Setting the remote control ID Setting the Time Set the remote control [ID] switch to On. You can set the time for the projector. The set time is used for the schedule function. "Scheduling Function" p.105 • When you turn on the projector for the first time, the message "Do you want to set the time?"...
  • Page 39 Installing the Projector Date & Time Press the [Menu] button to finish making settings. Submenu Function Date Set today's date. Set the current time. Time Set the time difference from Coordinated Time Difference (UTC) Universal Time. The settings made in Date & Time are applied. Daylight Saving Time Submenu Function...

  • Page 40: Other Settings

    Installing the Projector Settings related to display Other Settings Purpose Setting Methods Settings related to basic operations To change the menu position. Change the settings of Menu Position. s Extended - Display - Menu Position p.125 Purpose Setting Methods To change the menu direction. Change the settings of OSD Rotation.
  • Page 41 Change from Display. You can select from blue, the background. black, and logo. If no logo is registered, the EPSON logo is displayed. Display Background: Set the screen display with no image signal input. (Default value: Blue) s Extended - Display - Display Background p.125...

  • Page 42: Connecting Equipment

    Connecting Equipment The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. When using a commercially available computer cable Connect the computer's display output port to the projector's Computer port.

  • Page 43: Connecting Image Sources

    Connecting Equipment Connecting Image Sources To project video images, connect to the projector using one of the following methods. When using an optional component video cable (D-sub/component converter) s "Optional Accessories" p.205 Connect the component output port on the image source to the projector's Computer port. When using a commercially available component video cable (RCA) and a BNC/RCA adapter Connect the component output port on the video equipment to the projector's BNC port (R/Cr/Pr, G/Y, B/Cb/Pb).
  • Page 44 Connecting Equipment Cb/Pb Cr/Pr Computer Cb/Pb Cr/Pr BNC(R/Cr/Pr, G/Y, B/Cb/Pb) 3G/HD/SD SDI HDMI OUT HDMI Attention • If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction. If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.

  • Page 45: Connecting To An External Monitor

    Connecting Equipment Connecting to an External Monitor You can output images to an external monitor. When you want to output images from equipment connected to the Computer port or the BNC port Connect the D-Sub port on the external monitor to the Monitor Out port on the projector. When you want to output images from equipment connected to the 3G/HD/SD SDI port Connect the SDI OUT port on the external monitor to the Monitor Out SDI port on the projector.

  • Page 46: Connecting A Lan Cable

    Connecting Equipment Connecting a LAN Cable Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN cable. By connecting a computer to the projector over a network, you can project images and check the status of the projector. To prevent malfunctions, use a category 5 or higher shielded LAN cable.

  • Page 47: Connecting An Hdbaset Transmitter

    Connecting Equipment Connecting an HDBaseT Transmitter Connect the optional HDBaseT Transmitter with a commercially available 100BASE-TX LAN cable. "Optional Accessories" p.205 HDBaseT • Make sure you read the User's Guide supplied with the HDBaseT Transmitter carefully before use. • For the LAN cable, use an HDBaseT Alliance-recommended STP cable (straight) of category 6 or higher. However, operation is not guaranteed for all input/ output devices and environments.

  • Page 48: Installing The Wireless Lan Unit

    Connecting Equipment Install the wireless LAN unit port cover. Installing the Wireless LAN Unit Remove the screw for the wireless LAN unit port cover. Tighten the screw for the wireless LAN unit port cover. Remove the wireless LAN unit port cover. You can make wireless LAN connection settings in the Wireless LAN menu from the Configuration menu.

  • Page 49: Basic Usage

    Basic Usage This chapter explains how to project and adjust images.

  • Page 50: Turning On The Projector

    Turning On the Projector Before turning on the projector, connect your computer or video equipment The projector's power indicator turns blue (it is in standby mode). to the projector. This indicates that the projector is receiving power, but is not yet turned on.
  • Page 51 Turning On the Projector • If Direct Power On is set to On in the Extended menu, the projector automatically turns on when power is supplied to it. When the power cord is plugged in, note that the projector turns on automatically in cases such as recovery from a power outage.

  • Page 52: Turning Off The Projector

    Turning Off the Projector • To ensure a long projector service life, turn off the projector when you are not using it. The light source's operating life varies depending on the Configuration menu settings, environmental conditions, and usage conditions. The brightness of the projected image drops as projection time elapses.

  • Page 53: Projecting Images

    Projecting Images • You can make settings so that images are projected from the same Automatically Detecting Input Signals and input port the next time the projector is turned on. Changing the Projected Image (Source Search) s Extended - Operation - Startup Source Search p.125 •...

  • Page 54: Switching To The Target Image

    Projecting Images Switching to the Target Image Input Port You can change directly to the target image from the remote control or by pressing the following buttons on the control panel. The following shows the input ports for each button. Remote control Control panel Changes to images from a computer connected via the network.

  • Page 55: Adjusting Projected Images

    Adjusting Projected Images • Curved Surface Correcting Distortion in the Projected Image Correct distortion that occurs when projecting on a curved surface, and adjust the amount of expansion and contraction. You can correct keystone distortion in projected images using one of the "Curved Surface"...

  • Page 56: H/V-Keystone

    Adjusting Projected Images • By pressing the [Geometry] button on the remote control or the control panel, you can perform the selected adjustment method directly. • When you want to re-adjust the projection position and so on, if you want to release the correction status temporarily, set the Geometry Correction to Off.

  • Page 57: Quick Corner

    Adjusting Projected Images Correct the keystone distortion by using V-Keystone and H- You cannot combine with other correction methods. Keystone. V-Keystone Quick Corner This allows you to correct each of the four corners of the projected image independently. H-Keystone Press the [Menu] button while projecting. Select Geometry Correction from Settings.

  • Page 58: Curved Surface

    Adjusting Projected Images Repeat steps 4 and 5 as needed to adjust any remaining corners. If the [Esc] button is pressed for approximately two seconds, the confirm default reset screen is displayed. To complete the corrections, press the [Menu] button. Select Yes to reset the result of Quick Corner corrections.
  • Page 59 Adjusting Projected Images Use the following to check the adjustment range for the image. Select Correct Shape, and then press the [ ] button. "Curved Surface" p.212 Press the [Menu] button while projecting. Select Geometry Correction from Settings. Select Curved Surface, and then press the [ ] button.
  • Page 60 Adjusting Projected Images Use the [ ], [ ], [ ], and [ ] buttons to select the area you Use the [ ], [ ], [ ], and [ ] buttons to adjust the shape. want to adjust, and then press the [ ] button.
  • Page 61 Adjusting Projected Images Press the [Esc] button to display the screen from step 5. Select Adjust the linearity. Horizontal Linearity or Vertical Linearity, and then press the [ Correct it so that the distance between lines is equal. button. When pressing the [ ] button When Horizontal Linearity is selected When Vertical Linearity is selected Select Horizontal Linearity to adjust the horizontal expansion or contraction, and select Vertical Linearity to adjust the vertical...

  • Page 62: Corner Wall

    Adjusting Projected Images Corner Wall This allows you to correct distortion that occurs when projecting on a surface with right angles, such as a square pillar or the corner of a room, and adjust the amount of expansion and contraction. Face the projector directly opposing the screen with the lens position moved to the home position.
  • Page 63 Adjusting Projected Images Adjust the position of the projector and the lens shift so that the According to the projection area, select Horizontal Corner or line in the center of the screen matches the corner (the point Vertical Corner, and then press the [ ] button.
  • Page 64 Adjusting Projected Images When Vertical Corner is selected: Use the [ ], [ ], [ ], and [ ] buttons to select the area you Adjust the left and right based on the point nearest to the vertical want to adjust, and then press the [ ] button.

  • Page 65: Point Correction

    Adjusting Projected Images Point Correction Press the [ ][ ] buttons to adjust the linearity. Correct it so that the distance between lines is equal. Divides the projected image by the grid and corrects the distortion by moving the point of intersection from side to side and up and down. When pressing the [ ] button When Horizontal Corner is selected When Vertical Corner is selected...
  • Page 66 Adjusting Projected Images Use the [ ], [ ], [ ], and [ ] buttons to move to the point you want to correct, and then press the [ ] button. Select Point Correction, and then press the [ ] button. Use the [ ], [ ], [ ], and [ ] buttons to correct distortion.

  • Page 67: Selecting The Projection Quality (Selecting Color Mode)

    Adjusting Projected Images Each time you press the [Color Mode] button on the remote control, the You can fine tune the corrected results. Select Quick Corner on the Color Mode name is displayed on the screen and the Color Mode changes. screen from step 4 to adjust the tilt of the image.
  • Page 68 Adjusting Projected Images Select the item you want to set, and then press the [ ] button. Normal: Select this if you do not want to decrease the brightness. This makes the target usage time approximately 20,000 hours. Quiet: Select this if you are concerned about the noise made by the fan, This sets the brightness at 70%.

  • Page 69: Guide To Estimated Remains

    Adjusting Projected Images Guide to Estimated Remains Relationship between Brightness Level and usage time When Constant Brightness is set to On, the Estimated Remains is The following shows the relationship between Brightness Level and usage displayed. Estimated Remains indicates the amount of time for which time.

  • Page 70: Setting The Amount Of Light For The Projected Image

    Adjusting Projected Images Illustration Setting the Amount of Light for the Projected 7,000 hours Image 15,000 hours By automatically setting the luminance according to the brightness of the 25,000 hours displayed image, it lets you enjoy deep and rich images. 35,000 hours 47,000 hours Dynamic Contrast can only be set when the Color Mode is set to...

  • Page 71: Changing The Aspect Ratio Of The Projected Image

    Adjusting Projected Images Aspect Mode Explanation Changing the Aspect Ratio of the Projected H-Zoom Projects by enlarging the input image to the full width of Image the projected screen while retaining the aspect ratio. Areas that exceed the edges of the projected screen are not You can change the Aspect Ratio of the projected image to suit the type, projected.
  • Page 72 Adjusting Projected Images Aspect Ratio of Input Signal Aspect Ratio of Input Signal 16:10 16:9 16:10 16:9 Auto or Normal Full 16:9 H-Zoom Full V-Zoom H-Zoom Native V-Zoom *The image may differ depending on the resolution of the input signal. Screen type setting: 4:3 Aspect Ratio of Input Signal Native...

  • Page 73: Adjusting The Image

    Adjusting Projected Images Aspect Ratio of Input Signal 16:10 16:9 H-Zoom V-Zoom Native Only computer images and images from the HDMI port/HDBaseT port. The image may differ depending on the resolution of the input signal. Select RGBCMY, and then press the [ ] button.

  • Page 74: Gamma Adjustment

    Adjusting Projected Images Each time you press the [ ] button, the adjustment screen changes. To complete the corrections, press the [Menu] button. Gamma adjustment Select Gamma, and then press the [ ] button. You can adjust differences in the halftone brightness that occurs depending on the connected device.
  • Page 75 Adjusting Projected Images If you select DICOM SIM from Color Mode on the Image menu, select the Select Customized, and confirm using the [ ] button. adjustment value according to the projection size. • If the projection size is 150 inches or less, select a small value. Select Adjust it from the image, and confirm using the [ •...

  • Page 76: Frame Interpolation

    Adjusting Projected Images When Do you want to continue adjusting the setting? is Use the [ ][ ] buttons to select the tone that you want to displayed, select Yes or No. change, and then use the [ ] buttons to make the To adjust another location, select Yes, and repeat the procedure from adjustments.

  • Page 77: Adjusting Image Resolution (Image Enhancement)

    Adjusting Projected Images Select the level of interpolation from Low, Normal or High. Set to Off if noise occurs after setting them. Press the [Menu] button while projecting. Select Frame Interpolation from Image, and then press the [ Press the [Menu] button to finish making settings. button.

  • Page 78: 4K Enhancement

    Adjusting Projected Images Select Image Enhancement from Image, and then press the [ Select one of the following, and then press the [ ] button. button. Off: Disables 4K Enhancement. If a signal that exceeds the panel The following screen is displayed. resolution of this projector is input, the image is displayed according to the panel resolution of this projector.

  • Page 79: Image Preset Mode

    Adjusting Projected Images Image Preset Mode Noise Reduction Select the optimal setting according to the projected image from five presets You can smooth out rough images for softer image quality when inputting prepared in advance. progressive signals or progressive interlace signals. The following settings are saved in the presets.

  • Page 80: Super-Resolution

    Adjusting Projected Images Select MPEG Noise Reduction from Image Enhancement, and Use the [ ] buttons to select the item, and then use the then press the [ ] button. [ ][ ] buttons to make the adjustments. Fine Line Adjust: If this parameter is set to a positive value, details Select a level to reduce noise from Low, Normal, or High, and such as hair or fabric patterns will be enhanced.
  • Page 81 Adjusting Projected Images Use the [ ] buttons to select the item, and then use the [ ][ ] buttons to make the adjustments. Strength: The larger the value, the more the contrast is enhanced. Range: The larger the value, the wider the range of detail enhancement becomes.

  • Page 82: Useful Functions

    Useful Functions This section describes the Multi-Projection, Split Screen, Memory, Schedule, and Security functions.

  • Page 83: Multi-Projection Function

    Multi-Projection Function Adjustment Procedure Adjusting automatically online The arrangement for all projectors (Tiling) and adjustments for the images (Screen Matching) are performed automatically using the projector set as the master projector. Advance preparation Connect to the network - Connect all projectors to a network hub using LAN cables. You can setup up to nine projectors to project one large and wide image.

  • Page 84: Adjusting Manually Offline

    Multi-Projection Function Combining multiple projected images Combining multiple projected images Set the arrangement of the images. Set the arrangement of the images. s "Performing tiling automatically" p.85 s "Performing tiling manually" p.86 Adjust the edges of the images Adjust the edges of the images s "Edge Blending"...

  • Page 85: Performing Tiling Automatically

    Multi-Projection Function Performing tiling automatically Select Set, and then press the [ ] button. Automatically sets the arrangement for the projectors being used. You can Select Tiling, and then press the [ ] button. make settings by operating only the master projector. Select Tiling.

  • Page 86: Performing Tiling Manually

    Multi-Projection Function Press the [Menu] button while projecting. If the image is not located correctly, select Manual in step 6, and then follow the steps below to locate the image manually. Select Multi-Projection from Extended, and then press the [ (1) Set Row and Column in Layout.

  • Page 87: Edge Blending

    Multi-Projection Function Input the image signal to display the image. "Automatically Detecting Input Signals and Changing the Projected Image (Source Search)" p.53 When tiling is complete, adjust any positional gaps and the tint of the projected images. "Adjusting projected images individually" p.83 Edge Blending You can fine tune the overlapping areas to make seamless screen.

  • Page 88: Black Level

    Multi-Projection Function Turn on Edge Blending. In the example above, you need to adjust the Left Edge because you can see the overlapping areas on the left side of the image (1). Select Edge Blending, and then press the [ ] button.
  • Page 89 Multi-Projection Function Select Black Level from Multi-Projection, and then press the [ button. • You cannot adjust the Black Level when a test pattern is displayed. • If the Geometry Correction value is large, you may not be able to adjust correctly.

  • Page 90: Area Correction

    Multi-Projection Function To complete the adjustment, press the [Menu] button. Select the area you want to adjust, and then press the [ button. The selected area is displayed in orange. Area Correction If there are areas where the color does not match after adjusting the Black When multiple screens are overlapping, adjust based on the area Level, adjust individually in Area Correction.
  • Page 91 Multi-Projection Function Press the [ ] button to confirm the selection. The points where you want to set the range for adjustment are displayed. You can change the number of points displayed on one side in Points on the screen from step 8. Boundary lines that indicate areas where images overlap are displayed.

  • Page 92: Screen Matching

    Multi-Projection Function • We recommend performing Screen Matching at least 20 minutes after turning on the projector or canceling the shutter function. • To increase the accuracy of adjustments, we recommend darkening the room while projecting images and then making adjustments. •...

  • Page 93: Automatically Correct The Brightness And Tint For Multiple Projectors

    Multi-Projection Function • There are no gaps between projected images (or part of the images Select Screen Matching from Multi-Projection, and then press overlap) the [ ] button. • Projectors are installed in parallel with the screen • The blend width for edge blending is 15 to 45% Select Start Auto Adjustment, and then press the [ ] button.

  • Page 94: Color Matching

    Multi-Projection Function The following screen is displayed. Color Matching You can fine tune the color balance and brightness from black to white for each color tone. When the projectors are not connected to a network, or if you want to adjust manually after the automatic adjustments, perform the following steps on all projectors.

  • Page 95: Displaying A Scaled Image

    Multi-Projection Function Select Auto or Manual, and then press the [ ] button. Select Brightness, and then use the [ ][ ] buttons to adjust the brightness. Auto: Automatically adjusts the clipped area according to the adjustment values in Edge Blending and Tiling. You do not need to perform any steps after step 6.
  • Page 96 Multi-Projection Function Adjust the scale. Select Zoom Display or Full Display, and then press the [ ] button. Zoom Display: Adjusts according to the image currently displayed. Select the adjustment method with the [ ] buttons, then adjust Enlarge using the [ ][ ] buttons. -+: Enlarges or reduces an image horizontally and vertically at the same time.

  • Page 97: Projection Functions

    Projection Functions Input Sources for Split Screen Projection Projecting Two Images Simultaneously (Split The combinations of input sources that can be projected on a split screen Screen) are listed below. You can simultaneously project images from two sources on the right and Left Right Screen left of the screen.
  • Page 98 Projection Functions Select each input source for Left and Right. The currently selected input source is projected on the left of the screen. You can perform the same operations using the following procedure. Press the [Menu] button. s "Automatically Detecting Input Signals and Changing the The Split Screen Setup screen is displayed.
  • Page 99 Projection Functions The projected images will appear as shown below after setting the screen Select Swap Screens, and then press the [ ] button. size. The projected images on the left and right are swapped. Equal Larger Left Switching the left and right image sizes Larger Right Press the [Menu] button during split screen projection.

  • Page 100: Restrictions During Split Screen Projection

    Projection Functions Each time you press the [Shutter] button, the Shutter function turns on or Restrictions during split screen projection off. Remote control Control panel Operating restrictions The following operations cannot be performed during split screen projection. • Setting the configuration menu •...

  • Page 101: Freezing The Image (Freeze)

    Projection Functions Each time you press the [Freeze] button on the remote control, Freeze turns • If you want to fade out or fade in when turning the video on or off, on or off. set the desired number of seconds in Fade-out and Fade-in. s Extended - Operation - Shutter Settings - Fade-out, Fade- p.125 •...
  • Page 102 Projection Functions When you press the [ ] button and the message "Select this • When User's Logo Protection from Password Protection is image?" is displayed, select Yes. set to On, a message is displayed and the User's Logo cannot be changed.

  • Page 103: Memory Function

    Memory Function The settings for the image currently displayed and values for geometry Memory: Settings for the following menu items are saved in the correction are saved as a memory, allowing you to load them when memory. You can register up to 10 values. necessary.
  • Page 104 Memory Function Function Explanation Reset Memory Resets the name and settings of a saved memory. To reset all memories saved in Memory, Lens Position, and Geometry Correction, use Reset All Memories. s Reset - Reset All Memories p.137 If the mark on the left of the memory name is turned blue, it means the memory has already been registered.

  • Page 105: Scheduling Function

    Scheduling Function You can schedule turning the projector power on/off and switching the Set the schedule. input source, as events in the schedule. Registered events are executed Submenu Name Function automatically at the specified time on the specified dates or weekly. Event Settings Select an operation of the projector when the event You can register up to 30 events in Schedule, and one event in Extended...

  • Page 106: Checking An Event

    Scheduling Function Checking an Event This section explains how to check a Schedule event. Press the [Menu] button while projecting. Select Schedule Settings from Extended. The indicator turns on when an event is saved. • Light source calibration does not start automatically when the projector is used continuously for more than 24 hours, or when direct shutdown is used regularly.

  • Page 107: Editing An Event

    Scheduling Function Press the [ ][ ] buttons to highlight the date you want to check. The details of the events registered on the selected date are displayed. Highlight the event you want to edit, and then press the [Esc] button.
  • Page 108 Scheduling Function Submenu Name Function Edit Edits the content of the selected event. Select Save, and then press the [ ] button to complete the editing. Clear Deletes the selected event. Saves a new event. Select Save, and then press the Add New ] button to complete the registration.

  • Page 109: Security Functions

    Security Functions • User's Logo Protection The projector has the following enhanced security functions. Even if someone tries to change the User's Logo set by the owner of the • Password protect projector, it cannot be changed. When User's Logo Protection is set to You can limit who can use the projector.

  • Page 110: Entering The Password

    Security Functions If Password Protection is already activated, you must enter the password. If the password is entered correctly, the Password Protection setting menu is displayed. s "Entering the password" p.110 Select the type of Password Protect you want to set, and then Re-enter the password.

  • Page 111: Restricting Operation

    " The projector's Press the [ ] button on the control panel during projection to operation will be locked. Contact Epson as described in your documentation." display the Control Panel Lock screen.

  • Page 112: Lens Lock

    Security Functions Lens Lock You can release the control panel lock by one of the following two methods. This function locks the following buttons on the remote control related to • Use the remote control to set Control Panel Lock to Off the lens operation.

  • Page 113: Anti-Theft Lock

    Security Functions Even if the remote control button lock is on, the following operations are possible. • Resetting default for the Remote Receiver setting • Releasing the remote control button lock Anti-Theft Lock The projector is equipped with the following types of anti-theft security devices.
  • Page 114 Security Functions...

  • Page 115: Configuration Menu

    Configuration Menu This chapter explains how to use the Configuration menu and its functions.

  • Page 116: Using The Configuration Menu

    Using the Configuration Menu This section explains how to use the Configuration menu. Select a submenu item. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.

  • Page 117: List Of Functions

    List of Functions Top Menu Name Submenu Name Items or Setting Values Configuration Menu Table Overscan Auto, Off, 4%, and 8% Settable items vary depending on the model being used and the image Blanking Top, Bottom, Left, and Right signal and source being projected. Advanced Video Range, Input Signal, Image Top Menu Name...

  • Page 118: Network Menu

    List of Functions Top Menu Name Submenu Name Items or Setting Values Top Menu Name Submenu Name Items or Setting Values Projection Front, Front/Ceiling, Rear, and Status Information Status Information, Source, Signal Rear/Ceiling Information, Network Wired, Network Wireless, Maintenance, Operation Direct Power On, Sleep Mode, Version Sleep Mode Timer, High Altitude...

  • Page 119: Image Menu

    List of Functions Top Menu Name Submenu Name Items or Setting Values Image Menu Wired LAN menu s IP Settings DHCP, IP Address, p.134 Subnet Mask, Gateway Settable items vary depending on the image signal and source currently Address being projected. Setting details are saved for each color mode. IP Address Display On, Off "Automatically Detecting Input Signals and Changing the Projected...
  • Page 120 List of Functions Submenu Function Submenu Function Sharpness Standard: You can adjust the image sharpness. Image Enhance- You can adjust the image resolution. ment Thin Line Enhancement: If this parameter is set to a s "Adjusting Image Resolution (Image Enhancement)" positive value, details such as hair or fabric patterns will be p.77 enhanced.

  • Page 121: Signal Menu

    List of Functions Submenu Function Reset You can reset all adjustment values for the Image menu to their default settings. See the following to return all menu items to their default settings. s "Reset Menu" p.137 *1 This cannot be set when the signal input exceeds WUXGA. *2 This cannot be set when 4K Enhancement is enabled.
  • Page 122 List of Functions Submenu Function Submenu Function Position You can adjust the display position up, down, left, and right when Reset You can reset all adjustment values on the Signal menu to their a part of the image is missing so that the whole image is projected. default settings, except for Input Signal.

  • Page 123: Settings Menu

    List of Functions Submenu Function Settings Menu Geometry Cor- You can correct distortion. rection s "Correcting Distortion in the Projected Image" p.55 • Off: Temporarily cancels the geometry correction. • H/V-Keystone: Adjust V-Keystone, V-Balance, H-Keystone, and H- Balance to correct vertical and horizontal keystone distortion.
  • Page 124 List of Functions Submenu Function Submenu Function Brightness Set- Light Source Mode: Set the brightness for the light source. User Button Select the items in the Configuration menu that you want to • Normal: Select this if you do not want to decrease the tings assign to the [User1], [User2], and [User3] buttons on the remote control.

  • Page 125: Extended Menu

    List of Functions Submenu Function Extended Menu Display You can make settings related to the projector's display. Menu Position: Select the position to display the menu on the projected screen. Message Position: Select the position to display the message on the projected screen. Messages: When set to Off, the following items will not be displayed.
  • Page 126 List of Functions Submenu Function Submenu Function Projection Select from one of the following projection methods Operation Direct Power On: Set to On to turn on the projector depending on how the projector is installed. simply by supplying power. Front, Front/Ceiling, Rear, and Rear/Ceiling When the power cord is plugged in and the main power switch is turned on, note that the projector turns on You can change the setting as follows by pressing down...
  • Page 127 List of Functions Submenu Function Submenu Function s "Hiding the Image Temporarily (Shutter)" p.100 A/V Settings A/V Output: Set this to Always On if you want to output Advanced: The following items can be set. images to an external device even when the projector is in •...
  • Page 128 List of Functions Submenu Function Submenu Function HDBaseT Control Communications (This cannot be set when Extron Multi-Projection Make settings when projecting from multiple projectors. XTP is set to On.) When set to On, Ethernet s "Multi-Projection Function" p.83 communication, serial communication, and the wired Projector ID: Set the ID from 1 to 30.

  • Page 129: Network Menu

    List of Functions "Setting Password Protection" p.109 Submenu Function Reset You can reset all adjustment values for the Extended menu to their default settings. However, the following items are not reset. Screen Type, Screen Position, Projection, High Altitude Mode, Startup Source Search, Shutter Release, Inv Direction Button, Date &...

  • Page 130: Notes On Operating The Network Menu

    List of Functions Soft keyboard operations Submenu Function Net. Info. - Wired Displays the following network setting status information. The Network menu contains items that require input of alphanumerics • Projector Name during setup. In this case, the following software keyboard is displayed. Use •...

  • Page 131: Basic Menu

    Set the display format for the projector's network information. If Display LAN Info. you display the QR code, you can connect to a network just by reading the QR code in Epson iProjection. Text & QR Code is set Submenu Function by default.
  • Page 132 You can enter up to 32 characters on the Configuration menu. When entering more than 32 characters, use your Web browser to enter the text. s "Changing Settings Using a Web Browser (Epson Web Control)" p.188 When Connection Mode is set to Quick, the initial passphrase is set.
  • Page 133 List of Functions between a computer and an access point without using a server. This Submenu Function projector supports the latter method, without a server. IP Settings (This can only be set if Connection Mode is set to Advanced.) Configure the network. For setting details, follow the instructions from your network DHCP: Set to On to configure the network using DHCP .

  • Page 134: Wired Lan Menu

    List of Functions Wired LAN menu Submenu Function IP Address Dis- To prevent the IP address from being displayed on the LAN play Standby screen, set this to Off. Notifications menu When this is set, you receive an email notification if a problem or warning occurs in the projector.

  • Page 135: Others Menu

    Changes in projector settings take effect upon restarting. When this is set to On, the following functions are not available. • Epson Web Control • Message Broadcasting (EasyMP Monitor plugin) Set to On if you want to enable the acquisition of the device Control4 SDDP ®...

  • Page 136: Reset Menu

    You can switch the Message Broadcasting function to enable or disable. casting You can download Message Broadcasting and its Operation Guide from the following Web site. http://www.epson.com Reset menu Resets all of the network settings. Submenu Function Displays the projector's cumulative Projector Info Total Op.

  • Page 137: Reset Menu

    List of Functions Submenu Function Submenu Function Sync Info You can display the image signal Voltage Warning Info Displays a warning regarding the power information. voltage. This information may be needed if service The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours is required.

  • Page 138: Batch Setup

    Batch Setup Once the Configuration menu content has been set for one projector, you Setup Using a USB Flash Drive can use it to perform batch setup for multiple projectors (batch setup function). The batch setup function is only for projectors with the same This section explains how to perform batch setup using a USB flash drive.
  • Page 139 Batch Setup When the projector's indicators turn on as follows, release the [Esc] • Connect the USB flash drive directly to the projector. If the button. USB flash drive is connected to the projector through a USB hub, the settings may not be saved correctly. •...

  • Page 140: Reflecting Saved Settings To Other Projectors

    Batch Setup Reflecting saved settings to other projectors When writing completes normally, the projector enters standby Turn off the main power switch while the power cord is connected status. to the projector, and check that all of the projector's indicators turn off.
  • Page 141 Batch Setup While holding down the [Menu] button, turn on the main power When writing completes normally, the projector enters standby switch. status. When the projector's indicators turn on as follows, release the [Menu] button. Power supply Blue - On When the projector is in standby status, remove the USB flash drive.

  • Page 142: Setup By Connecting The Computer And Projector With A Usb Cable

    Batch Setup While holding down the [Esc] button, turn on the main power Setup by Connecting the Computer and Projector switch. with a USB Cable The following operating systems support the batch setup function. • Windows Vista or later • Mac OS X 10.5.3 or later Saving settings to a computer Turn off the main power switch while the power cord is connected to the projector, and check that all of the projector's indicators...

  • Page 143: Reflecting Saved Settings To Other Projectors

    Batch Setup When the projector's indicators turn on as follows, release the [Esc] Reflecting saved settings to other projectors button. Turn off the main power switch while the power cord is connected to the projector, and check that all of the projector's indicators turn off.
  • Page 144 Batch Setup While holding down the [Menu] button, turn on the main power When using OS X, perform "Remove EPSON_PJ". switch. When all of the indicators start flashing, the settings are being written. Caution When the projector's indicators turn on as follows, release the [Menu] button.

  • Page 145: When Setup Fails

    Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Power: Blue - flashing fast...

  • Page 146: Troubleshooting

    Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.

  • Page 147: Using The Help

    Using the Help If a problem occurs with the projector, you can display the Help screen to Confirm the selection. assist you. You can also set the projector to an appropriate state by answering the questions. Before displaying the help screen, assign Help to a User Button. s Settings - User Button p.123 Press the [User] button to which Help was assigned.

  • Page 148: Reading The Indicators

    Reading the Indicators This projector has the following five indicators to indicate the projector's status. Power indicator Indicates the projector's status. Status indicator Indicates the projector's status. Laser indicator Indicates the light source status. Temp indicator Indicates the internal temperature status. This is normally turned off. Filter indicator Indicates the air filter status.
  • Page 149 Reading the Indicators Indicator Projector's Sta- Explanation Power Status Laser Temp Filter supply Projecting The projector is projecting. Blue - On Blue - On Status varies Cool down status This is the status immediately after turning off the power. In this status, all buttons are disabled. Blue - Blue - On Flashing...
  • Page 150 Internal Error Stop using the projector, remove the power plug from the electrical outlet, and Internal Error contact your local dealer or the nearest address provided in the Epson Projector Contact List. Blue - Orange - Epson Projector Contact List...
  • Page 151 Filter supply Laser Error Stop using the projector, remove the power plug from the electrical outlet, and Laser Error contact your local dealer or the nearest address provided in the Epson Projector Retardation Plate Contact List. Error Orange - Blue -...
  • Page 152 Filter supply Laser Warning Stop using the projector, remove the power plug from the electrical outlet, and Laser Warning contact your local dealer or the nearest address provided in the Epson Projector Contact List. Blue - Orange - Status Status...
  • Page 153 • If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.

  • Page 154: Reading Status Monitor

    Reading Status Monitor The LCD of the control panel indicates the projector's status. Also, you can You can check the items and information of each category by using the check the detailed status or error history of this projector by using the ] buttons.

  • Page 155: Understanding The Screen

    Reading Status Monitor Display when error or warning occurs Understanding the screen When a problem has occurred in the projector, the following is displayed. Normal display When an error occurs When a warning occurs Each display category contains the following information. Temp Status Information : Operating status of the projector...

  • Page 156: Setting The Screen Display (Lcd)

    Reading Status Monitor Setting the screen display (LCD) You can adjust the contrast and the lighting time for the back light. Press the [ ] buttons to select Setting. Setting Press the [ ] button to display the following screen. Press the [ ] buttons to adjust the contrast.

  • Page 157: Explanations Of The Display Content

    Reading Status Monitor Explanations of the Display Content Category Item Status Display Explanation Status Information System Displays the projector's status. See the following for more information on how to remedy the errors and warnings. s "Reading the Indicators" p.148 The projector is in normal status. Warm-Up The projector is warming up.
  • Page 158 Reading Status Monitor Category Item Status Display Explanation Status Information Source HDMI Displays the source name for the connected equipment currently being projected. HDBaseT DVI-D Computer On-Screen Display Displays the settings for the On-Screen Display. When set to Off, the menus or messages are not displayed on the projected images.
  • Page 159 Reading Status Monitor Category Item Status Display Explanation Source Video Signal Displays the current input video signal. Color Space Displays the color space of the current input signal. YCbCr YPbPr H-Frequency Displays the horizontal frequency of the current input signal. V-Frequency Displays the vertical frequency of the current input signal.
  • Page 160 Reading Status Monitor Category Item Status Display Explanation Signal Information 5V Detection Detected Displays the detection results of 5V signals. Not Detect TMDS Clock Displays the TMDS frequency of the current input signal. TMDS H-Frequency Displays the horizontal frequency of the current input signal. TMDS V-Frequency Displays the vertical frequency of the current input signal.
  • Page 161 Reading Status Monitor Category Item Status Display Explanation Network Wired Projector Name Displays the projector name used to identify the projector when connected to a network. Connection Mode HDBaseT Displays the connection path for LAN. DHCP Displays the DHCP settings. IP Display Displays the IP address display settings.
  • Page 162 Reading Status Monitor Category Item Status Display Explanation Maintenance Operation Time Displays the total operation time of the projector. Laser Op.Time Displays the laser operating time for each setting in Light Source Mode. Version Serial No. Displays the projector's serial number. Main Displays the projector's firmware version information.

  • Page 163: Problem Solving

    Problem Solving If any of the following problems occur and the indicators do not offer a • Cannot control correctly using Art-Net sp.171 solution, refer to the pages given for each problem. • Nothing appears on the external monitor sp.171 Problems Relating to Images •...

  • Page 164: Problems Relating To Images

    Problem Solving Problems Relating to Images No images appear Check Remedy Did you press the [ ] button on the remote control or control Press the [ ] button to turn on the power. panel? Are the indicators switched off? The power cord is not connected correctly or power is not being supplied.

  • Page 165: Projection Stops Automatically

    Problem Solving Projection stops automatically Check Remedy Is Sleep Mode set to On? Press the [ ] button to turn on the power. If you do not want to use Sleep Mode, change the setting to Off. s Extended - Operation - Sleep Mode p.125 "Not supported."...

  • Page 166: Images Are Fuzzy, Out Of Focus, Or Distorted

    Problem Solving Images are fuzzy, out of focus, or distorted Check Remedy Is the focus adjusted correctly? Make sure that at least 20 minutes has passed after the projection starts, and press the [Focus] button on the remote control to adjust the focus. s "Correcting the Focus"...

  • Page 167: The Image Is Truncated (Large) Or Small, The Aspect Is Not Suitable, Or The Image Has Been Reversed

    Problem Solving The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed Check Remedy Have the Screen been set correctly? Make the appropriate Screen for the screen being used. s "Screen Settings" p.28 Is the aspect adjusted correctly? Press the [Aspect] button to select an aspect suitable for the input source.

  • Page 168: Images Appear Dark

    Problem Solving Check Remedy Is the image brightness adjusted correctly? Adjust the Brightness setting from the Configuration menu. s Image - Brightness p.119 Are the cables connected correctly? Check that all the cables required for projection are securely connected. Check that no cables are disconnected and that there are no poor contacts in the cables. s "Connecting Equipment"...

  • Page 169: Automatic Adjustments Are Not Performed Correctly

    Problem Solving Automatic adjustments are not performed correctly Check Remedy Have at least 20 minutes passed since the power was turned on? Auto adjustment does not work correctly until the temperature of the projector is stable. Perform auto adjustment 20 minutes after turning on the projector or canceling Shutter.

  • Page 170: Other Problems

    Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List...

  • Page 171: Cannot Control Correctly Using Art-Net

    Problem Solving Check Remedy Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. s "Replacing the remote control batteries" p.22 Are the remote control ID and the projector ID matched? Make sure the ID for the projector you want to operate and the ID for the remote control match.

  • Page 172: I Want To Change The Language For Messages And Menus

    "The battery that saves your clock settings is running low." is displayed Check Remedy The internal power supply that saves your clock settings may Contact your local dealer or the nearest address provided in the Epson Projector Contact List. be running low. Epson Projector Contact List...

  • Page 173: About Event Id

    About Event ID Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List...

  • Page 174: Maintenance

    Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.

  • Page 175: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of Warning projected images starts to deteriorate. Do not use sprays that contain flammable gas to remove dust and lint from the lens. The projector may catch fire due to the high internal temperature. Caution When cleaning, turn off the main power switch, and then unplug the power cord from the electric outlet.

  • Page 176: Cleaning The Air Filter

    Cleaning Cleaning the air filter This projector has one air filter on the front and two on the sides (see the following illustration). This explanation uses the air filter on the front as an example. Open the air filter cover. After you turn off the projector's power and the confirmation buzzer beeps, disconnect the power cord.
  • Page 177 Cleaning The method for opening the air filter cover differs for the front and the side. The air filter cover at the side is attached to a cord to prevent it from falling. Remove the air filter. Attention Grip the tab of the air filter, and pull it straight out. If the air filter is hit too hard, it may become unusable due to deformities and cracks.
  • Page 178 Cleaning Close the air filter cover. • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.179 • It is recommended that you clean the air filter every 20,000 hours. Clean it more often than this if using the projector in a particularly dusty environment.

  • Page 179: Replacing Consumables

    Replacing Consumables This section explains how to replace the air filter. After you turn off the projector's power and the confirmation buzzer beeps, disconnect the power cord. Remove the air filter cover screw. Replacing the Air Filter Air filter replacement period If the message is displayed frequently even though the air filter has been cleaned, replace the air filter.
  • Page 180 Replacing Consumables The method for opening the air filter differs for the front and the side. The air filter cover at the side is attached to a cord to prevent it from falling. Close the air filter cover. Remove the air filter. Grip the tab of the air filter, and pull it straight out.
  • Page 181 Replacing Consumables Dispose of used air filters properly in accordance with your local regulations. Material of the frame part: Polypropylene Material of the filter part: Paper...

  • Page 182: Image Maintenance

    Image Maintenance Press the [Menu] button while projecting. Color Calibration Select Color Calibration from Extended. Automatically adjusts aging deterioration of the color tone for the whole screen based on the default color settings. Select Start Auto Adjustment, and then press the [ ] button.

  • Page 183: Panel Alignment

    Image Maintenance Panel Alignment Adjusts the pixel color shift for the LCD panel. You can adjust the pixels horizontally and vertically by 0.25 pixel within a range of ±1 pixel. • Image quality may decline after performing LCD alignment. • Images for pixels that extend beyond the edge of the projected screen are not displayed.

  • Page 184: Color Uniformity

    Image Maintenance Select a combination of R (red), G (green), and B (blue) for the grid color. R/G/B: Displays a combination all three colors; red, green and blue. The actual color of the grid is white. R/G: This is available when R is selected from Select Color. Displays a combination of two colors;...
  • Page 185 Image Maintenance Press the [Esc] button to return to the previous screen. Select Start Adjustments, and then press the [ ] button. Select the area you want to adjust, and then press the [ button. Adjust the outer areas first, and then adjust the whole screen. Color Uniformity: Turns color uniformity on or off.
  • Page 186 Image Maintenance To complete the adjustment, press the [Menu] button.

  • Page 187: Appendix

    Appendix...

  • Page 188: Monitoring And Controlling

    About Message Broadcasting Message Broadcasting is plugin software for EasyMP Monitor. If your Web browser is set up to connect via a proxy server, the Epson Message Broadcasting can be used to send a message (JPEG file) to project Web Control screen cannot be displayed. To display Web Control, you need to make settings so that a proxy server is not used for a on all Epson projectors or specified projectors connected on the network.

  • Page 189: Basic Control Screen

    Monitoring and Controlling • When performing the functions from the Home screen, you may be prompted to enter the user name and password. The following two types of user names and passwords are available. Remote: The user name is "EPSONREMOTE" and the default password is "guest".

  • Page 190: Osd Control Pad Screen

    Monitoring and Controlling Press to turn the image on or off temporarily. Items in the Configuration menu that cannot be set in Epson Web Automatically detects the input signal. Control are listed below. Turns the projector off. • Settings Menu - User Button •...
  • Page 191 Monitoring and Controlling Lens Shift Operation Screen Move the slider to adjust the focus. Press the buttons to adjust the focus. Move the slider to adjust image warping. Press the buttons to adjust image warping. Displays the Focus / Distortion operation screen. Displays the Zoom operation screen.

  • Page 192: Status Information Screen

    Monitoring and Controlling Test Pattern Operation Screen Saves a memory. Displays a list of memories. Erases a memory. Changes a memory name. Status Information Screen You can check the projector's status. See the following for display details. "Reading Status Monitor" p.154 Displays a test pattern.

  • Page 193: Using The Mail Notification Function To Report Problems

    • Peltier Device error Sender: The email address set in From See the following to deal with problems or warnings. Subject: EPSON Projector "Reading the Indicators" p.148 Line 1: The projector name where the problem has occurred Line 2: The IP address set for the projector where the problem has occurred.

  • Page 194: Management Using Snmp

    For more details, contact your local dealer or the nearest address provided Command list in the Epson Projector Contact List. When the power ON command is transmitted to the projector, the power Epson Projector Contact List turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":"...

  • Page 195: About Pjlink

    Monitoring and Controlling • Projector input port name: RS-232C About PJLink <At the projector> <At the computer> PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols.

  • Page 196: About Crestron Roomview

    • The following functions cannot be used while using Crestron EPSON ® RoomView s "Changing Settings Using a Web Browser (Epson Web Control)" • Model name displayed for "Product name information query" p.188 EPSON L25000U Message Broadcasting (EasyMP Monitor plug-in) •...
  • Page 197 Monitoring and Controlling Using the operation window Button Function Freeze Images are paused or unpaused. s "Freezing the Image (Freeze)" p.101 Contrast Adjusts the difference between light and shade in the images. Brightness Adjusts the image brightness. Color Adjusts the color saturation for the images. Adjusts the image sharpness.
  • Page 198 Monitoring and Controlling Button Function Performs the same operation as the [Esc] button on the remote control. s "Remote Control" p.19 You can perform the following operations when you click the tabs. Function Help Displays the Help Desk window. Used to send messages to, and receive messages from, the administrator using ®...
  • Page 199 Monitoring and Controlling Item Function Item Function DHCP Select the Enabled check box to use DHCP. You cannot New Password Enter the new password when changing the password to enter an IP address if DHCP is enabled. open the operation window. (The name can contain up to 26 single-byte alphanumeric characters.) IP Address Enter the IP address to assign to the currently connected...

  • Page 200: About Art-Net

    Monitoring and Controlling About Art-Net Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the projector by using a DMX controller or an application system. Channel definitions The following explains the channel definitions used when controlling the projector in Art-Net. Chan- Function Operation...
  • Page 201 Monitoring and Controlling Chan- Function Operation Parameters Default Operation Content Lens position Non-operational 0 - 31 Moves the lens shift to the home position. Move to home position 32 - 63 Non-operational 64 - 255 Horizontal lens shift (+) lens adjustment Movement - Large 0 - 31 Performs horizontal lens shift using the amount of movement specified.
  • Page 202 Monitoring and Controlling Chan- Function Operation Parameters Default Operation Content (-) lens adjustment Movement - Small 160 - 191 Movement - Me‐ 192 - 223 dium Movement - Large 224 - 255 Electronic focus (+) lens adjustment Movement - Large 0 - 31 Performs electronic focus using the amount of movement specified.
  • Page 203 Monitoring and Controlling Chan- Function Operation Parameters Default Operation Content Load lens memory 4 64 - 79 Load lens memory 5 80 - 95 Load lens memory 6 96 - 111 Load lens memory 7 112 - 127 Load lens memory 8 128 - 143 Load lens memory 9 144 - 159...
  • Page 204 Monitoring and Controlling While controlling the projector using Art-Net and performing operations from the remote control or control panel, settings made by the DMX controller or application software may not be applied to the projector correctly. When you want to apply all the channel controls to the projector, set Channel 13 to "Cannot control", then set it back to "Can control".

  • Page 205: Optional Accessories And Consumables

    Optional Accessories and Consumables The following optional accessories and consumables are available. Please HDBaseT Transmitter ELPHD01 purchase these products as and when needed. The following list of optional This transmitter performs long distance transmissions for HDMI signals and control accessories and consumables is current as of: July 2016. Details of signals for 1 LAN cable.

  • Page 206: Screen Size And Projection Distance

    Screen Size and Projection Distance Projection Distance List 4:3 Screen Size Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom 120" 244x183 174 to 174 -123 to -60 150" 305x229 219 to 219 -154 to -75 200" 406x305 296 to 296 -205 to -100 250"...

  • Page 207: Elplu05

    Screen Size and Projection Distance Unit: cm 16:10 Screen Size Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom 16:10 Screen Size Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom 1000" 2154x1346 1342 to 1342 -904 to -442 100"...

  • Page 208: Elplm12

    Screen Size and Projection Distance Unit: cm 4:3 Screen Size Minimum (Wide) to Vertical Lens Shift 16:9 Screen Size Maximum (Tele) Top to Bottom Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom 100" 203x152 418 to 567 -175 to +23 100"...

  • Page 209: Elplm13

    Screen Size and Projection Distance 16:10 Screen Size 16:9 Screen Size Minimum (Wide) to Vertical Lens Shift Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom Maximum (Tele) Top to Bottom 250" 538x337 939 to 1267 -387 to +51 972"...

  • Page 210: Elpll09

    Screen Size and Projection Distance Unit: cm 4:3 Screen Size Minimum (Wide) to Vertical Lens Shift 16:9 Screen Size Maximum (Tele) Top to Bottom Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom 100" 203x152 1187 to 1776 -160 to +8 100"...

  • Page 211: Elpll10

    Screen Size and Projection Distance 16:10 Screen Size 16:9 Screen Size Minimum (Wide) to Vertical Lens Shift Minimum (Wide) to Vertical Lens Shift Maximum (Tele) Top to Bottom Maximum (Tele) Top to Bottom 250" 538x337 2569 to 3868 -354 to +18 972"...

  • Page 212: Adjustment Range For Projected Images

    Adjustment Range for Projected Images Horizontally curved surface (concave) H/V-Keystone "H/V-Keystone" p.56 Screen Center of the circle of which the Lens type Vertical Horizontal curved surface is an arc ELPLR05 -35˚ to 35˚ -30˚ to 30˚ Projection distance ELPLU05 -39˚ to 39˚ -30˚...
  • Page 213 Adjustment Range for Projected Images Horizontally curved surface (convex) Vertically curved surface (concave) Screen Screen Center of the circle of which the Center of the circle of which the curved surface is an arc curved surface is an arc Projection distance Projection distance Radius of the circle of which the Radius of the circle of which the...

  • Page 214: Corner Wall

    Adjustment Range for Projected Images Vertically curved surface (convex) Corner Wall "Corner Wall" p.62 Screen Center of the circle of which the The α in the figure is the maximum angle in which the projector can move. curved surface is an arc See the table below for detailed values.
  • Page 215 Adjustment Range for Projected Images Convex horizontal corner correction (correction to bilateral symmetry by Concave vertical corner correction (correction to horizontal symmetry by using corners as the center line) using corners as the center line) Screen Screen α Angle of possible projector α...
  • Page 216 Adjustment Range for Projected Images Convex vertical corner correction (correction to horizontal symmetry by using corners as the center line) Screen α Angle of possible projector motion Side view Lens type Vertical lens shift: Vertical lens shift: Top Home position Side view Side view ELPLR05...

  • Page 217: Supported Monitor Displays

    Supported Monitor Displays Component video Supported Resolutions Signal Refresh Rate (Hz) Resolution (Dots) When the resolution of the input signals is larger than the projector's panel SDTV (480i) 720x480 resolution, the image quality may decline. SDTV (576i) 720x576 SDTV (480p) 720x480 Computer signals (analog RGB) SDTV (576p)

  • Page 218: Input Signals From Sdi Input Port

    Supported Monitor Displays Input signals from SDI input port Signal Refresh Rate (Hz) Resolution (Dots) WQHD 2560x1440 Signal Refresh Resolution Mode Color Num- Level *1,2 WQXGA 2560x1600 Rate (Hz) (Dots) differ- ber of ence Bits SDTV (480i/480p) 720x480 signals SDTV (576i/576p) 720x576 SDTV 59.94...

  • Page 219: Specifications

    Specifications Projector General Specifications EB-L25000U Product name Dimensions 790 (W) x 299 (H) x 710 (D) mm (not including raised section) 1.43" Wide LCD panel size Display method Polysilicon TFT active matrix 2,304,000 Resolution WUXGA (1920 (W) x 1200 (H) dots) x 3 Automatic Focus adjustment Automatic (1-1.35x)
  • Page 220 Specifications Approx. 66 kg (Excluding the handles) Mass *1 The specifications are when ELPLM12 is attached. *2 ELPLU05/ELPLL09/ELPLL10 has a maximum vertical direction of approx. 55% and a maximum horizontal direction of approx. 25%; ELPLR05 has a maximum vertical direction of approx. 15% and a maximum horizontal direction of approx. 5%. *3 Standard time until brightness of the light source is reduced by half.
  • Page 221 Specifications FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 222: Appearance

    Appearance Center of lens Units: mm...

  • Page 223: Glossary

    Control4 Simple Device Control4 SDDP is a technology developed by Control4 to allow Control4 control systems to acquire device information for the projector. Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the Control4 Web site for more Discovery Protocol (SDDP) details.
  • Page 224 Glossary Projects information to create one screen at a time, displaying the image for one frame. Even though the number of scan lines is the same, the amount Progressive of flicker in images decreases because the volume of information has doubled compared with an interlace system. The light-emitting element of a display maintains the same luminosity and color for an extremely short time.

  • Page 225: General Notes

    7 operating system ® ® Microsoft Windows 8 operating system Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this ® ® Microsoft Windows 8.1 operating system product or third parties for damages, losses, costs, or expenses incurred by the ®...

  • Page 226: Trademarks And Copyrights

    Mac OS X 10.4.x Other product names used herein are also for identification purposes only and may be Mac OS X 10.5.x trademarks of their respective owners. Epson disclaims any and all rights in those marks. Mac OS X 10.6.x OS X 10.7.x ©SEIKO EPSON CORPORATION 2016.

  • Page 227: List Of Safety Symbols Compliant With Iec60950-1 A2

    List of Safety Symbols Compliant with IEC60950-1 A2 The following table lists the meaning of the safety symbols labeled on the Symbol mark Approved Meaning equipment. standards IEC60417 Battery, general Symbol mark Approved Meaning No. 5001B On battery powered equipment. To standards identify a device for instance a cover for IEC60417...
  • Page 228 List of Safety Symbols Compliant with IEC60950-1 A2 Symbol mark Approved Meaning standards ISO 3864 General prohibition To identify actions or operations that are prohibited. ISO 3864 Contact prohibition To indicate injury that could occur due to touching a specific part of the equipment. Never look into the projection lens while the projector is on.

  • Page 229: Index

    EasyMP Monitor ........188 Change Input ..........17 Edge Blending ........87, 128 Image Menu ..........119 Cinema ............67 Epson Web Control ........188 Indicators ............ 148 Cleaning ............175 Esc ..............18 Info menu ........... 136 Cleaning the air filter and air intake vent ESC/VP21 ...........
  • Page 230 Index Lens Operation Lock ......... 112 Password protect ........109 RoomView ..........196 Lens replacement cover ......25 PJLink ............195 RS-232C port ..........16 Lens Shift ............18 PJLink Password ........131 Lens shift ............31 Port Number ..........135 Position ............
  • Page 231 Index Supported monitor displays ..... 217 Swap Screens ..........99 Sync Info ............. 137 Sync............. 121 Test Pattern ........18, 29, 124 Tint .............. 119 Tracking ............121 Trap IP Address 1/2 ........135 User Button ..........124 User's Logo ..........101 User's Logo Protection ......

This manual is also suitable for:

Eb-l25000u

Table of Contents