Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG SCN71800S0
Summary of Contents for AEG SCN71800S0
- Page 1 EN FRIDGE-FREEZER SCN71800S0 USER MANUAL...
- Page 2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 3: Table Of Contents
CONTENTS Contents 4 Safety information 6 Control panel 11 First use 11 Daily use 13 Helpful hints and tips 15 Care and cleaning 16 What to do if… 18 Technical data 18 Installation 26 Noises 28 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to... -
Page 4: Safety Information
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation and safety features. -
Page 5: Daily Use
– thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. -
Page 6: Control Panel
Control panel • Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. Installation For electrical connection carefully follow the instructions given in specific paragraphs. •... -
Page 7: Switching Off
Fridge Temperature warmer button Mode button OK button Freezer Temperature colder button Freezer Temperature warmer button Display It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible. Display Fridge compartment indicator Fridge temperature indicator and timer indicator... -
Page 8: Switching Off The Fridge
Control panel Press the appliance ON/OFF button for 5 seconds. The display switches off. To disconnect the appliance from the power disconnect the mains plug from the pow- er socket. Switching off the fridge To switch off the fridge: Press the Mode button until the corresponding icon appears. The fridge Off indicator and the fridge compartment indicator flash. -
Page 9: Child Lock Function
Press the Timer regulator button to change the Timer set value from 1 to 90 minutes. Press the OK button to confirm. The Minute Minder indicator is shown. The Timer start to flash (min). At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds: Remove any drinks contained in the freezer compartment. -
Page 10: Coolmatic Function
Control panel • flashing Alarm light • acoustic buzzer When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing alarm button. COOLMATIC function If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator. -
Page 11: First Use
Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. Press the OK button to confirm. The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end: Press the Mode button until the FROSTMATIC indicator flashes. -
Page 12: Storage Of Frozen Food
Daily use Storage of frozen food When first starting-up or after a period out of use, before putting the products in the com- partment let the appliance run at least 2 hours on the higher settings. If large quantities of food are to be stored, remove all drawers and baskets from appliance and place food on cooling shelves to obtain the best performance. -
Page 13: Helpful Hints And Tips
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at dif- ferent heights. -
Page 14: Hints For Fresh Food Refrigeration
Helpful hints and tips warmer settings to allow automatic defrosting and so a saving in electricity consump- tion. Hints for fresh food refrigeration To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator •... -
Page 15: Care And Cleaning
• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time; • not open the door frequently or leave it open longer than absolutely necessary. • Once defrosted, food deteriorates rapidly and cannot be refrozen. •... -
Page 16: What To Do If
What to do if… The absence of frost is due to the continuous circulation of cold air inside the compart- ment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: •... - Page 17 Problem The compressor does not start immediately after pressing the FROSTMATIC or COOLMATIC button, or after changing the tem- perature. Water flows on the rear plate of the refrigerator. Water flows into the re- frigerator. The temperature in the appliance is too low/high. The temperature in the re- frigerator is too high.
-
Page 18: Technical Data
Technical data Replacing the lamp CAUTION! Disconnect the plug from the mains socket. Closing the door Clean the door gaskets. If necessary, adjust the door. Refer to "Installation". If necessary, replace the defective door gaskets. Contact the Service Center. TECHNICAL DATA Dimension of the recess Rising Time Voltage... -
Page 19: Electrical Connection
Positioning Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance: Climate class Electrical Connection CAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. -
Page 20: Door Reversibility
Installation Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. Connect the wire coloured brown to the terminal either marked with the “L“ or col- oured red. Check that no cut, or stray strands of wire is present and the cord clamp over the outer sheath. -
Page 21: Ventilation Requirements
Ventilation requirements min. 6 cm 200 cm Installing the appliance CAUTION! Make sure that the mains cable can move freely. Do these steps. The airflow behind the appliance must be sufficient. min. 200 cm Installation • Loosen and remove the lower pin. - Page 22 Installation 4 mm 44 mm Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture. Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hinge.
- Page 23 Installation Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case. Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B). Attach the hinge covers (E) to the hinge.
- Page 24 Installation ca. 50 mm ca. 50 mm 90° 21 mm 90° 21 mm Disconnect the parts (Ha), (Hb), (Hc) and (Hd). Install the part (Ha) on the inner side of the kitchen furniture. Push the part (Hc) on the part (Ha).
- Page 25 8 mm 8 mm Installation Open the appliance door and the kitchen furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appli- ance door and the furni- ture door and mark the holes.
-
Page 26: Noises
Noises Do a final check to make sure that: • All screws are tightened. • The sealing strip is attached tightly to the cabinet. • The door opens and closes correctly. NOISES There are some sounds during normal running (compressor, refrigerant circulation). Press the part (Hd) on the part (Hb). - Page 27 Noises BRRR! BRRR! BLUBB! BLUBB! HISSS! HISSS! SSSRRR! SSSRRR!
-
Page 28: Environmental Concerns
Environmental concerns CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. - Page 32 222344536-A-272011...