Advertisement
Available languages
Available languages
Quick Links
WARNING Failure to read and follow the operator's
manual and all operating instructions can
result in death, bodily injury, and/or property
damage.
WARNING Fuel and its vapors are flammable and
explosive. Turn off engine and wait at least
2 minutes before refueling. Let spilled fuel
evaporate before starting engine. Always allow
space for fuel expansion.
WARNING High pressure water spray can cut
through skin. Never spray people or animals,
as injury can result. Spray gun traps high
water pressure, even when engine is stopped
and water is disconnected. ALWAYS point spray gun in
safe direction, press red button and squeeze spray gun
trigger, to release high pressure, every time you stop
engine.
You will need:
• Utility knife • Unleaded fuel • Garden hose, 50 feet or less • Safety goggles (indirect vented type)
Unpack pressure washer
1.
Remove everything from carton except pressure washer.
2.
Open carton completely by cutting each corner from top to bottom.
3.
Ensure you have all included items prior to assembly.
If items are damaged or missing, call 1-800-222-3136.
Assemble pressure washer
1.
Place handle (a) against two upright posts.
2.
Insert two handle bolts (g) towards outside, through holes at bottom
of handle. Fully tighten handle in an upright position with two red
handle knobs (f). Hand tighten.
2
3.
Place accessory tray (e) over four holes on back side of handle. Push
all four tree clips (b) into holes until they sit flat against accessory
tray.
3
4.
Attach hose wrap (j) to the back side of accessory tray.
Place hose wrap over bracket in the back of accessory tray and twist
one eighth turn to lock in position.
4
5.
Hose wrap is easily removed from the accessory tray for wrapping
and unwrapping of the high pressure hose. A hose clip on the
reel makes it easy to wrap the hose while it is detached from the
accessory tray.
6.
Attach bottle bracket (l) to handle with carriage bolt (c) and black
plastic knob (d). Tighten by hand.
5
© 2009 Every effort has been made to ensure that the information in this document is accurate and correct. However, we reserve the right to alter or otherwise improve the product and this document at any time without prior notice and without incurring obligation.
*This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association (PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).
2600 MAX PSI* Pressure Washer
WARNING Outdoor use ONLY. DO NOT start or run
engine indoors or in an enclosed area, even
if windows and doors are open. Running
engines give off carbon monoxide, an
odorless, poison gas that can cause nausea, fainting or
death.
WARNING Starter cord kickback (rapid retraction)
can result in bodily injury. NEVER pull
starter cord without first relieving spray
gun pressure. Pull starter cord slowly until
resistance is felt, then pull rapidly. Kickback will pull
hand and arm toward engine faster than you can let go.
High pressure can cause spray gun to kickback. Hold
spray gun with both hands during use.
WARNING Risk of eye injury. Spray can splash
back or propel objects. Always wear indirect
vented (chemical splash) safety goggles,
marked to comply with ANSI Z87.1 when
using or in vicinity of this equipment. NEVER substitute
safety glasses or dry-condition goggles for indirect
vented safety goggles.
Items Included:
Operator's Manual (not shown)
1
a
2
1
f
3
e
b
4
j
5
c
l
Quick Start Guide
Add engine oil and fuel
NOTICE Before starting the engine, check oil level and ensure that
engine is serviced as described in the Operator's Manual.
NOTICE DO NOT use E85 fuel.
NOTICE DO NOT mix oil with fuel.
1.
Move pressure washer outdoors to a flat, level surface.
2.
Remove oil fill cap (A). Slowly pour entire contents of provided oil
bottle (n) into oil fill.
3.
Replace and fully tighten oil fill cap.
4.
Remove fuel cap (B). Add clean, fresh, UNLEADED fuel. Allow space
in fuel tank for fuel expansion.
5.
Replace fuel cap. Let any spilled fuel evaporate before starting
engine.
Move pressure washer
to safe operating location
WARNING Outdoor use ONLY. DO NOT start or run engine indoors
or in an enclosed area, even if windows and doors are open.
Running engines give off carbon monoxide, an odorless,
poison gas that can cause nausea, fainting or death.
1.
Move pressure washer outdoors to a flat, level surface. Running
engines give off carbon monoxide.
2.
Keep at least 5 ft. (1.5 m) clearance on all sides of pressure washer
including overhead to reduce the risk of exhaust heat or exhaust
gases igniting nearby combustible material.
Connect spray gun
1.
Attach high pressure hose (m) to spray gun (p).
2.
Remove and discard 2 shipping caps from high pressure outlet
and garden hose inlet connections.
3.
Uncoil high pressure hose and attach to high pressure outlet.
Connect water supply
NOTICE If inlet screen is damaged or missing,
DO NOT use pressure washer, call 1-800-222-3136.
1.
Inspect garden hose inlet screen for damage.
2.
Clean screen if necessary. Refer to operator's manual for instructions.
3.
Run cold water through garden hose for 30 seconds to clean out any
debris. Garden hose length must not exceed 50 feet. Turn off water
supply and attach garden hose to water inlet. Tighten by hand.
4.
Detergent siphon hose (h), is used when cleaning with pressure
washer-safe detergents. Refer to operator's manual for more
information.
11
Start pressure washer
NOTICE You MUST connect and turn on water supply fully before
starting engine.
WARNING Risk of eye injury. Spray can splash back or propel
objects. Always wear indirect vented (chemical splash)
safety goggles, marked to comply with ANSI Z87.1 when
using or in vicinity of this equipment. NEVER substitute
safety glasses or dry-condition goggles for indirect vented safety
goggles.
1.
Turn on water supply.
2.
Put on safety goggles.
3.
Push trigger lock (red button) on spray gun and pull trigger until
water comes out in a steady stream. Release trigger to locked
position.
12
4.
Attach quick connect wand (q) to spray gun (p).
g
5.
Choose desired quick connect spray tip (k), pull back on collar of
quick connect wand (q). Insert spray tip and release collar. Tug on
spray tip to make sure it is securely in place.
6.
Turn fuel valve (C) to "On" position.
7.
Pull choke rod (D) to "Closed" position.
8.
Move engine stop switch (E) to "On" position.
WARNING Starter cord kickback (rapid retraction) can result in
bodily injury. NEVER pull starter cord without first relieving
spray gun pressure. Pull starter cord slowly until resistance
is felt, then pull rapidly. Kickback will pull hand and arm
toward engine faster than you can let go. High pressure can cause
spray gun to kickback. Hold spray gun with both hands during use.
9.
When starting engine, hold top of handle with left hand.
With your right hand, pull cord slowly until resistance is felt and then
pull rapidly to avoid kickback. After each starting attempt, where
engine fails to run, always point gun in safe direction and squeeze
spray gun trigger to release high pressure.
NOTE: When engine starts, slowly move choke rod to "Open" position
as engine warms. If engine falters, move choke rod to "Closed" position,
then to "Open" position.
10.
Point gun toward surface to be cleaned. Push trigger lock (red
button) and pull trigger to begin spraying.
Stop pressure washer
1.
Let engine idle for 2 minutes.
d
2.
Move engine stop switch (E) to "Off" position.
3.
Turn off water supply.
4.
Point spray gun in safe direction, push trigger lock, and squeeze
spray gun trigger to relieve retained high water pressure.
5.
Disconnect garden hose from pump.
6.
Disconnect high pressure hose from pump and gun for storage. For
long term storage instructions, see operator's manual.
7.
Remove safety goggles.
Have Questions?
Do not return to store. We can help.
Call Customer Service Toll-Free 1-800-222-3136
Or visit our website www.craftsman.com
6
6
7
8
9
10
10
13
14
15
16
16
17
16
6
B
A
7
Exhaust Port
Pointed away from
dwelling openings
8
m
p
9
10
Inlet Screen
11
h
12
Trigger Lock
13
p
q
14
k
q
15
C
16
E
D
OFF
Closed
ON
17
Advertisement
Related Manuals for Craftsman 2600 MAX PSI
Summary of Contents for Craftsman 2600 MAX PSI
- Page 1 Have Questions? Quick Start Guide Do not return to store. We can help. Call Customer Service Toll-Free 1-800-222-3136 2600 MAX PSI* Pressure Washer Or visit our website www.craftsman.com Add engine oil and fuel WARNING Failure to read and follow the operator’s WARNING Outdoor use ONLY.
- Page 2 ¿ALGUNA PREGUNTA? No vuelva a la tienda. Podemos ayudarle. Llame gratuitamente al departamento de servicio al cliente, 1-800-222-3136 2600 MAX PSI* Limpiadora a presión o visite nuestro sitio web, www.craftsman.com Adición de aceite de motor y combustible ADVERTENCIA Si no se leen y siguen las ADVERTENCIA SÓLO para uso a la intemperie.