Related Manuals for Sony PCV-RS202
Summary of Contents for Sony PCV-RS202
- Page 1 Sony VAIO Desktop User Guide P C V - R S s e r i e s ( P C V - 2 2 2 6 / P C V - 2 2 2 8 )
-
Page 2: Read This First
Macrovision Corporation. Reverse engineering or disassembly is prohibited. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user licence agreement. -
Page 3: Environmental Information
Read this first ® NERGY ® ® As an E Partner, Sony has determined that this product meets the E guidelines for energy efficiency. The NERGY NERGY ® International Energy Star Office Equipment Program is an international program that promotes energy saving through the use of computers and their office equipment. -
Page 4: Safety Information
Safety information Owner's record The serial number and model number are located on the back of your Sony desktop. Record the serial number and the model number and refer to them if you call VAIO-Link. See also the printed Specifications document. - Page 5 There is visible and invisible radiation when the optical disc drive is open: avoid direct exposure to the laser beam. The disc drives are classified as CLASS 1 LASER PRODUCTS and comply with the Laser Product Safety Standard EN 60825-1. Repair and maintenance only by authorised Sony technicians. Improper repairs and use can create safety hazards. CLASS 1...
-
Page 6: Regulatory Information
Read this first Regulatory information Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive). Declaration of Conformity The European Union is targeting the free movement of goods for the internal market and to prevent technical barriers to trade. This effort has resulted in several EU Directives asking that manufacturers make their products comply with essential standards. - Page 7 Disposing of the internal memory backup battery Your Sony VAIO desktop is equipped with an internal back-up memory battery that should not have to be replaced during the lifetime of the product. If you want to replace the battery, please contact VAIO-Link: http://www.vaio-link.com...
- Page 8 Dual drives – Enjoy the freedom of two disc drives*. Sony audio and video quality – The advanced graphics card and high-quality external stereo speakers enable you to take advantage of today’s advanced multimedia applications, games, and entertainment software.
- Page 9 VAIO Recovery and Documentation Disc and VAIO-Link information; A Dual Language Operating System leaflet*; Your Sony Guarantee conditions; A Safety Regulations leaflet; A Modem Regulations leaflet. * Depending on your country. Dual Language Operating Systems are available in Belgium (Dutch and French), the Netherlands...
- Page 10 Glossary refers to terms used in this manual. Refer to your Software Guide for information on the software and how to use Sony applications. About the Software is a short description of the features of the software available with VAIO systems.
- Page 11 Welcome Installing and updating applications explains how to install, run or uninstall a software application. Managing drivers explains how to install, update or uninstall a driver. In the VAIO-Link Customer Service Guide you will find all the VAIO-Link information you need, including specific contact numbers for each country.
- Page 12 Welcome Your Sony VAIO desktop and its accessories The following hardware items are in the box: Main unit VAIO keyboard Stereo speakers VAIO wheel mouse TV-Out cable See the printed Guide to Troubleshooting and Using the VAIO Recovery and Documentation Disc for details.
-
Page 13: Ergonomic Considerations
Welcome Ergonomic considerations Whenever possible, try and take into account the following ergonomic considerations when using your new computer, whether at home or in the office:... - Page 14 Welcome Position of the keyboard and mouse – Place the keyboard directly in front of you (1). Keep your forearms horizontal, with your wrists in a neutral, comfortable position (2) while using the keyboard or mouse – not at an angle. Let your upper arms hang naturally at your sides. Place the mouse at the same level as the keyboard and use your whole arm to move it.
-
Page 15: Table Of Contents
Using your VAIO desktop Using your VAIO desktop This section describes how to start using your computer and how to use your computer’s internal and external devices. Locating connectors Starting your computer Shutting down your computer Using the keyboard Setting up the monitor Using the mouse Using the disc drives Using the floppy disk drive... -
Page 16: Locating Connectors
Using your VAIO desktop Locating connectors Please see the printed Specifications sheet to identify connectors on your model. -
Page 17: Starting Your Computer
Using your VAIO desktop Starting your computer Once you have all the components set up as described in the Getting Started guide, you can begin to use your computer. To start up your computer, proceed as follows: Press the power button on the system unit until the blue VAIO light turns on (1). Press the power button on your monitor to turn the display on (2). -
Page 18: Shutting Down Your Computer
Using your VAIO desktop Shutting down your computer It is important that you shut down your computer properly so you do not lose unsaved data. To shut down your computer, proceed as follows: Click the Start button. Click Turn Off Computer. The Turn off computer screen appears. -
Page 19: Using The Keyboard
Using your VAIO desktop Using the keyboard This section describes the features of the VAIO keyboard. - Page 20 Using your VAIO desktop Keys Escape key (1) Function keys (2) Correction keys (3) Lock keys (4) Print Screen key (5) Numeric keypad area (6) Navigation keys (7) Application key Operator keys (9) ® Windows (10) Volume buttons (11) Mute button (12) Descriptions The <Esc>...
- Page 21 Using your VAIO desktop Keys Standby button (13) Indicator LEDs (14) Descriptions Press this button either to start up your computer, or to enter Standby mode, or to resume from a power saving mode. A green light indicates whether the Num Lock, Caps Lock, and Scroll Lock functions are active.
-
Page 22: Combinations And Functions With The Windows Key
Using your VAIO desktop Combinations and functions with the Windows key Combinations + <F1> + <Tab> + <D> + <E> + <F> + <Ctrl> + <F> + <L> + <M> <Shift> + + <M> + <R> + <U> Function ® Displays Windows Help and Support Center. - Page 23 Using your VAIO desktop Indicators Light Num Lock Turns on when the number keys in the numeric keypad are active. Caps Lock Turns on when the letters appear in uppercase as you type. The <Shift> key lowers the case of typed letters when Caps Lock is on.
-
Page 24: Setting Up The Monitor
Using your VAIO desktop Setting up the monitor If your VAIO desktop is delivered with a monitor, it may be delivered with a digital 15" or 17'' LCD (XGA TFT) monitor or with a common analogue CRT monitor, depending on your model and vendor. For more information on how to use your delivered monitor, refer to the user manual that came with it. -
Page 25: Using The Mouse
Using your VAIO desktop Using the mouse The VAIO wheel mouse allows you to control the cursor in a number of ways. You can point to, select, drag, and scroll objects on the screen using the buttons and the wheel. You can adjust the mouse pointer speed and other functions under Mouse Properties. -
Page 26: Using The Disc Drives
Using your VAIO desktop Using the disc drives Your computer is equipped with two separate drives. See the Specifications sheet for details on your model. The DVD±RW drive reads data from and writes data onto DVD and CD. The DVD-RW drive reads data from and writes data onto DVD and CD. The CD-RW drive reads data from and writes data onto CD. - Page 27 Using your VAIO desktop CD/DVD writable drives: What (re)writable CD formats can I use? Recordable and rewritable CD formats include CD-R, CD-RW (high-speed supported). CD-R (recordable) allows one-time recording on a disc whereas CD-RWs can be rewritten as many as 1,000 times. Writing CDs and DVDs To achieve optimum performance when writing data on to disc (also called ’burning’), follow these recommendations:...
- Page 28 Using your VAIO desktop Make sure that the screensaver is deactivated. Region codes indicators are labelled on the DVDs to indicate in which region and on what type of player you can play the disc. Unless a 2 or ALL is labelled on your DVD or on the packaging, you cannot play the disc on this player.
-
Page 29: Using The Floppy Disk Drive
Using your VAIO desktop Using the floppy disk drive Your VAIO desktop is equipped with a floppy disk drive. Inserting a floppy disk To insert a floppy disk, proceed as follows: Hold the floppy disk with the label side facing up. Gently push the disk into the floppy disk drive until it clicks into place. -
Page 30: Using The Modem
Using your VAIO desktop Using the modem Your VAIO desktop is equipped with an internal modem. You need to connect a phone line to take advantage of online services and the Internet, to register your computer and software online, and to contact VAIO-Link. -
Page 31: Expansion Capabilities
The empty PCI slots allow you the choice of adding to the expansion capabilities of your computer. See Upgrading your VAIO computer You are strongly advised not to add hardware yourself. Please contact your local Sony dealer for advice on changing the internal hardware components. -
Page 32: Using Power Saving Modes
Using your VAIO desktop Using power saving modes The colour of the VAIO and power indicator lights on the main unit tells you which mode the computer is in. VAIO light Blue No light No light Using Standby mode If you plan to stop using your computer for a short period of time (not overnight), you can put it into Standby mode instead of turning it off completely. - Page 33 Using your VAIO desktop ® Use the Windows Save your work, close all applications and close your Internet connection, if applicable. From the Start menu on the Windows Alternatively, press <Alt>+<F4> to get to the same dialog box. Select Stand By. The computer goes into Standby mode, indicated by the umber light under the power button.
- Page 34 Using your VAIO desktop Using Hibernate mode If you are interrupted and need to leave your computer suddenly, you can put it into Hibernate mode. This power saving mode saves you the time of shutting down in the normal way. When you put your computer into Hibernate mode: Everything in the memory is saved to the hard disk.
- Page 35 Using your VAIO desktop ® You can leave Windows running when using Hibernate If you press the power button for more than six seconds, the computer will switch off completely. When the computer is in Hibernate mode, you cannot insert a disc. Hibernate uses less power than Standby.
-
Page 36: Connecting Peripheral Devices
Connecting peripheral devices Connecting peripheral devices You can add functionality to your computer by connecting any of the following peripherals, and more. Before you connect a peripheral, turn off both the computer and the peripheral. Connect the power cord only after connecting all cables. Turn on the computer only after turning on all peripherals. -
Page 37: Notes On Connecting Universal Serial Bus (Usb) Devices
Connecting peripheral devices Notes on connecting Universal Serial Bus (USB) devices You can connect a USB device, for example, a scanner or a printer, to your VAIO desktop. Your computer features the latest USB technology, having been upgraded to USB Specification version 2.0. USB Specification version 2.0 increases device data throughput up to 480 Mbps, 40 times faster than USB 1.1 devices. -
Page 38: Connecting An External Display
Connecting peripheral devices Connecting an external display You can connect multiple displays to your desktop, each using a different port on the back of your computer: an LCD screen using the DVI connector, a CRT or LCD screen using the VGA connector, a TV using the TV-Out connector. - Page 39 Connecting peripheral devices Click nView Display Mode on the left. Select the Device Settings button. Click Select Output Device... and select the desired display. Click OK. If you reboot after changing the settings as above, the default setting returns and the image is shown on the VGA screen again.
-
Page 40: Connecting A Projector
Connecting peripheral devices Connecting a projector You can connect a projector (such as the Sony LCD projector) directly to your computer. To connect a projector to your VAIO desktop, proceed as follows: Plug one end of the VGA cable (not supplied) into the VGA connector on the back of your computer, and the other end into the projector you want to use (1). -
Page 41: Connecting A Tv
Connecting peripheral devices Connecting a TV You can connect a TV directly to your computer. See also Using two screens while watching a DVD film (page 27). In order to be able to use a TV screen, you also have to enable the TV-Out function. Your VAIO desktop is delivered with a TV-Out cable (or ’converter cable’), which is for use with TV sets without an S-Video port. - Page 42 Connecting peripheral devices Connecting a TV that has a S-Video port To connect a TV to your VAIO desktop with an S-Video cable (not supplied), proceed as follows: Plug one end of the S-Video cable into the TV Out port on the back of your computer. Plug the other end of the S-Video cable into your TV’s S-Video port.
-
Page 43: Connecting An External Microphone
Connecting peripheral devices Connecting an external microphone Your VAIO desktop does not contain an internal microphone. If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone. To connect an external microphone, plug the microphone cable (1) into the microphone port (2) identified by the symbol Make sure your microphone is designed for computer use. -
Page 44: Connecting A Printer
Connecting peripheral devices Connecting a printer To connect a printer, proceed as follows: Plug the printer cable into the printer connector on your computer. Plug the printer power cord into an AC outlet. This illustration may not correspond to the configuration of your model. Please check the section Back Panel of your printed Specifications sheet to see where the ports are exactly. -
Page 45: Connecting A Usb Printer
Connecting peripheral devices Connecting a USB printer To connect a USB printer, simply plug the printer's USB cable into one of the USB ports on your VAIO desktop. There are USB ports at the front and at the back of your computer. Do not turn on the computer or the printer until all the connections are made. -
Page 46: Connecting An I.link™ Device
An i.LINK™ connection with other compatible devices is not fully guaranteed. You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices. The i.LINK™ connection varies depending on the software applications, operating system and i.LINK™ compatible devices you use. Refer to the documentation that came with your software for more information. -
Page 47: Connecting A Digital Video Camera Recorder
Launch the DVgate application (see your Software Guide for more information). On Sony digital video cameras, ports labelled DV Out, DV In/ Out or i.LINK™ are i.LINK™-compatible. The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently. -
Page 48: Connecting Two Vaio Computers
Connecting peripheral devices Connecting two VAIO computers If you have adminstrator rights on your computer, you can connect your VAIO desktop to another VAIO computer using an i.LINK™ cable (not supplied). With the software delivered with your VAIO desktop, you can copy, edit or delete files on another VAIO computer that also has Windows You can also print a document on a printer connected to another VAIO computer. -
Page 49: Connecting To A Network
Connecting peripheral devices Connecting to a network Your computer comes with a built-in Ethernet interface. To connect to a network, proceed as follows: Connect your 10BASE-T/100BASE-TX Ethernet cable (not supplied) to the Ethernet port on the back of the computer. The sticker covering the Ethernet port is there to remind customers in Germany not to insert an ISDN cable (see caution below). - Page 50 Connecting peripheral devices For more information about connecting your VAIO desktop to the network, please consult the Hardware troubleshooting section of the VAIO-Link website (http://www.vaio-link.com): How to troubleshoot network problems. For help on connecting to a network, see your network administrator. This illustration may not correspond to the configuration of your model.
-
Page 51: Getting Help
Getting help Getting help This section describes how to get help and support from Sony, as well as troubleshooting tips for your computer. Sony's support options Sony offers you several support options for your computer. Sony documentation Please see the section Documentation pack delivered with your computer, as well as further sources of reference. - Page 52 Getting help e-Support What is e-Support? You have searched our user guides and website (www.vaio-link.com) but have not found an answer to your question/issue? e-Support is the ideal solution for you! Our e-Support Web Portal is an interactive website on which you can submit any technical query you may have regarding your VAIO and receive answers from our dedicated support team.
- Page 53 Getting help Can I submit my questions at any time? Yes, you can submit your questions 24/7, but please keep in mind that our e-Support Team can only treat your queries from Monday till Friday between 8am and 6pm. Is there a cost involved for using e-Support? No, this is a complete free of charge service offered to all registered VAIO customers! How do I know when the e-Support Team has handled my query/case? As soon as your case has been dealt with by our e-Support Team, you will receive an email, notifying you...
-
Page 54: Troubleshooting
This section describes how to solve common problems you might encounter when using your VAIO desktop. Many problems have simple solutions. Please try these suggestions before contacting VAIO-Link or your local Sony dealer. You are recommended to print out this section and keep it for future reference. -
Page 55: About The Computer And Software
Getting help About the computer and software My computer does not start Check that the computer is plugged directly into a power source (without an extension cord) and that it is turned on. Check that the monitor is properly connected to the main unit, plugged into a power source and turned on. - Page 56 Getting help Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears. Use the keyboard’s arrow keys to select the Exit menu. Press <F5> or use the arrow keys to select Load Setup Defaults and then press <Enter>.
- Page 57 Getting help Increasing the system memory may also help. The computer has two memory slots. For memory upgrades, use only PC2100 (DDR266) DDR-SDRAM DIMM or PC2700 (DDR333) DDR-SDRAM DIMM modules (depending on your model). For information on installing memory, please see the section Upgrading memory Another option is to defragment the hard drive.
- Page 58 Getting help If the message Application not responding appears, click End Now. Please be warned that you will lose unsaved data. If this happens regularly: Contact the software publisher or designated provider for technical support. Make sure the software is compatible with your equipment and operating system. Try reinstalling the software.
-
Page 59: About The Display
Getting help About the display My monitor does not display anything Check that the computer is plugged into a power source and that it is turned on. Check that the monitor is plugged into the computer and to a power source, and turned on. Check that the power indicators on the main unit and on the screen are on. - Page 60 Getting help I want to change the resolution of my display To change the resolution of your display, proceed as follows: From the Start menu, select Control Panel. Click Appearance and Themes, then Display. The Display Properties dialog box appears. Select the Settings tab.
-
Page 61: About Discs And Floppy Disks
Getting help About discs and floppy disks Make sure the computer is turned on and press the eject button on the drive. If the eject button is not working, click Start, and select My Computer. Right-click the optical disc drive and select Eject. - Page 62 Getting help In the Device Manager, check that the correct drivers are installed properly. To display the Device Manager, Go to the Control Panel. Click Performance and Maintenance, and then the System icon. In the System Properties dialog box, click the Hardware tab. A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc.
- Page 63 Getting help Is the DVD recorder properly detected and functioning according to the Device Manager? Go to Start, right-click My Computer and select Properties. Click the Hardware tab and select Device Manager. Open DVD/CD-ROM drives in the tree list. Please note that the name of the drive can differ for each model.
- Page 64 Getting help The recording and reading speed of CDs / DVDs is slow Generally, the speed of a CD/DVD-RW is slower than that of a CD/DVD-ROM, or CD/DVD-R. The speed can also vary depending on the type of format.
-
Page 65: About Sound
Getting help About sound My speakers are not producing any sound If you are using an application that has its own volume control, check that the volume is turned up. Check the volume controls in Windows Check that the speakers are connected correctly and turned on, and that the power cable is plugged into the mains (see the printed Getting Started brochure or the back of the Specifications sheet for connection details). - Page 66 Getting help In the Options menu, select Advanced Controls, and then click the Advanced button under Microphone - Balance. The Advanced Controls for Microphone dialog box appears. Deselect the Microphone Boost check box, and then click Close. Close the Recording Control dialog box. The unwanted noise should now be cleared.
-
Page 67: About The Modem
Getting help About the modem My internal modem does not work or cannot establish a connection Check that the phone line is plugged into your computer. Make sure that the modem is the only device connected to your phone line. Check that the phone line is working. -
Page 68: About Peripherals
My mouse does not work If you are using the supplied PS/2 mouse, you must connect it before you turn on your computer. If you are using an optional Sony USB mouse, check that the appropriate driver and software are properly installed. - Page 69 Getting help Some surfaces do not allow the sensor to function properly because the irregularities are too small to be detected. The best surfaces reflect but scatter light; an example is a blank sheet of white drawing paper. Otherwise, use a standard mouse pad. My mouse needs to be set up for left-hand use To set your mouse up for left-handed users, proceed as follows: Go to Start, select Control Panel, then click the Printers and Other Hardware option.
- Page 70 Getting help You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices. How do I install a printer? Always check the printer manufacturer’s website for the latest drivers for Windows Service Pack 1 before proceeding.
- Page 71 The default setting for the printer port mode is correct for most printers. If you cannot print, try changing the printer port mode, as follows: Restart your computer. When you see the Sony logo, press <F2>. The BIOS setup menu screen appears. Use the keyboard’s arrow keys to select the Advanced menu.
-
Page 72: About Digital Video Captures And Dvgate
Getting help About digital video captures and DVgate When I record images to a digital video device using DVgate, my system displays the message 'Recording to DV device failed. Check the power and cable connections to the devices and try again' Close all open applications and restart your computer. -
Page 73: About I.link™ Devices
The connected i.LINK™ device is not recognised Disconnect the i.LINK™ device, then connect it again. You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices. I cannot establish an i.LINK™ connection between two VAIO computers You must have administrator rights on your computer to be able to link the two. -
Page 74: Upgrading Your Vaio Computer
To avoid the invalidation of your guarantee by mishandling, it is recommended that: You contact your local Sony dealer to install any new internal hardware components. You do not install memory modules yourself, if you are not familiar with upgrading memory on a computer. -
Page 75: Removing The Cover
Upgrading your VAIO computer Removing the cover To remove the cover from the main unit, proceed as follows: Shut down your computer and disconnect all peripheral devices, such as your printer. Unplug the computer from the mains. Wait until the computer cools down. The inside of the main unit becomes very hot during operation. - Page 76 Upgrading your VAIO computer Inserting a PCI add-on card Your computer has open PCI expansion slots. These slots enable you to install an add-on card to expand the functionality of your system. When you remove a slot cover to install an add-on card, you may have to temporarily remove other components.
- Page 77 Upgrading your VAIO computer Install the add-on board by sliding it into the expansion slot and secure it with the screw from the expansion slot cover, as shown (may vary from actual configuration): Attach any internal cables that the board requires (see the manual that came with the add-on board). Replace the side cover as described in Replacing the cover Reconnect all peripheral devices and the power cord, and then turn on the computer.
-
Page 78: Upgrading Memory
Upgrading your VAIO computer Upgrading memory In the future, you may want to upgrade the memory installed on your VAIO by replacing / adding memory modules. However, we recommend that you do not install them yourself unless you are familiar with upgrading memory on a computer. - Page 79 Upgrading your VAIO computer Do not place the memory module in places subject to: - Heat sources such as radiators or air ducts, - Direct sunlight, - Excessive dust, - Mechanical vibration or shock, - Strong magnets or speakers that are not magnetically shielded, - Ambient temperature of more than +35°C or less than +5°C, - High humidity.
- Page 80 Upgrading your VAIO computer Adding / replacing a memory module If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer. To add or change a memory module, proceed as follows: Shut down the computer, unplug it, and remove any peripheral devices.
- Page 81 Upgrading your VAIO computer Viewing the amount of memory To view the amount of memory, proceed as follows: Turn on the computer. Click the Start button, point to All Programs, then VAIO System Information, and click VAIO System Information again. You can view the amount of installed memory here.
-
Page 82: Replacing The Cover
Upgrading your VAIO computer Replacing the cover To replace the cover, proceed as follows: Align the cover to the frame of the unit. Slide the side cover firmly over the unit, sliding it forward until the cover snaps into place. Replace the three release screws. - Page 83 Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. Please contact VAIO-Link if you need assistance. On handling the hard disk On using the power source On handling your computer On handling LCD screens On handling floppy disks On handling compact discs (page 83)
-
Page 84: On Handling The Hard Disk
Precautions On handling the hard disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer. -
Page 85: On Handling Your Computer
Precautions On handling your computer Handle the unit carefully while lifting, holding the unit by the bottom only. Do not attempt to lift the unit by using the floppy disk drive as a carry point. Clean the unit with a soft cloth, which is either dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. -
Page 86: On Handling Lcd Screens
Precautions The computer uses high-frequency radio signals and may cause interference to radio or TV reception. Should this occur, relocate the computer a suitable distance away from the set. Use only specified peripheral equipment and interface cables; otherwise, problems may occur. Do not use cut or damaged connection cables. -
Page 87: On Handling Floppy Disks
Precautions On handling floppy disks Do not open the shutter manually or touch the surface of the floppy disk. Keep floppy disks away from magnets. Keep floppy disks away from direct sunlight and other sources of heat. On handling compact discs Do not touch the surface of the disc. - Page 88 Glossary Glossary This section refers to terms used in this manual and elsewhere in the VAIO world. These terms and definitions have been compiled to provide you with a better understanding of your VAIO computer. Term <F1> key 10BASE-T/100BASE-TX ACPI BIOS CD-ROM CD-RW...
- Page 89 DVD-RW. The DVD+RW is a slightly different rewritable DVD format, backed by a group of companies known as the DVD+RW Consortium, which includes Sony. Its advantages include high- compatibility, high capacity and easy-to-use functionality. Like the DVD-RW, it can be rewritten about 1,000 times.
- Page 90 Sony’s version of the IEEE 1394 standard for high-speed digital serial interface. The standard is regarded in the audio/video and IT industries as the most suitable interface for connecting computers and digital audio/video devices (such as digital cameras etc.).
- Page 91 Glossary Term MAPI maximum RAM Motherboard MPEG Definition A LAN (Local Area Network) is a group of computers connected together within a limited geographical area. It enables users to share devices (such as printers) and information using one processor or server. Short for Liquid Crystal Display.
- Page 92 Glossary Term Operating system Partition PC Card Pixel Processor PS/2 PSTN Definition The operating system is software that manages all the other programs in a computer. It defines how the computer reads and writes information to its disks (and other hardware). Windows 2000, Windows Millennium Edition, Windows XP Professional and Windows XP Home Edition are examples of operating systems found on VAIOs.
- Page 93 Glossary Term Resolution RGB signal cable Service pack 1 S-video SDRAM Standard RAM Definition Short for Random Access Memory, the memory used to run programs and store data in current use. RAM is the fastest kind of memory to read from and write to. Information stored in RAM is lost when you turn off the computer.
- Page 94 You can connect up to 127 devices to a USB port. The USB standard is Hot Plug and Play. Short for Video Audio Integrated Operation. Brand name covering Sony's PC products, peripherals, accessories and software. VAIO-branded items are all designed to make the best use of Sony's Audio-Video (AV) and Information Technology (IT) skills.
- Page 95 Glossary Term Definition Short for Extended Graphic Array, a graphics standard. An XGA board can provide up to 1,024 x 768 pixels and supports up to 65 thousand colours.
- Page 96 Sony, BlueSpace NE, DVgate, Giga Pocket, HotKey Utility, Memory Stick Formatter, PicoPlayer, PictureGear Studio, Network Smart Capture, SonicStage, Sony Notebook Setup, Sony Style Imaging, UI Design Selector, VAIO Action Setup, VAIO Edit Components, VAIO Media, VAIO System Information, VAIO Web Phone, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation.