Page 1
Operating instructions Dishwasher Always read the operating instructions and the installation sheet before setting up, installing, and commissioning the appliance. This prevents both personal injury and damage to the machine. en-CA HG07 M.-Nr. 11 848 180...
Contents Warnings and safety instructions ..............Notes on the operating instructions ..............15 Notes on the layout ..................... 15 Items included ....................16 Guide to the appliance ..................17 Machine overview....................17 Control field ......................18 Caring for the environment ................19 Initial commissioning ..................
Page 4
Contents Selecting a program .................... 43 Display of program cycle time................44 Starting a program ....................44 End of program....................45 Energy management ................... 45 Turning off the dishwasher .................. 46 Unloading the dishwasher................... 46 Interrupting a program..................47 Cancelling or changing a program ..............47 Options .......................
Page 5
Contents Technical Service....................79 Contact in the event of a fault ................79 EPREL database ....................79 Warranty ......................79 Optional accessories ..................80 Installation......................82 Water intake ......................82 Water drainage ....................84 Electrical connection ................... 86 Sound emission testing ..................88...
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 7
Warnings and safety instructions Correct application This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. This dishwasher is intended for use at altitudes of up to 4,000 m above sea level.
Page 8
Warnings and safety instructions Safety with children Children under 8 years of age must be kept away from the dishwasher unless they are constantly supervised. Children aged 8 and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognize the possible dangers caused by incorrect operation.
Page 9
It is most important that this basic safety requirement is fulfilled. If in doubt, the electrical installation should be checked by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate or lack of grounding system (e.g., electric shock). ...
Page 10
Warnings and safety instructions Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency, and voltage) match the domestic electricity supply. This data must correspond in order to avoid the risk of damage to the dishwasher. Compare these before connecting the appliance to the electricity supply.
Page 11
If the power cable is damaged, it must only be replaced with a specific cable of the same type (available from Miele Service). For safety reasons, this must only be done by Miele Service or a service technician authorized by Miele.
Page 12
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact Miele Service. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10–12 kg (depending on model).
Page 13
Warnings and safety instructions Dishware may be very hot at the end of the program. Allow dishware to cool until it is comfortable enough to handle before unloading them. Only use detergent and rinse aid formulated for domestic dishwashers.
Page 14
Warnings and safety instructions Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance, and, if applicable, product liability claims will be invalidated. Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the...
Notes on the operating instructions These operating instructions apply to Additional information and several different dishwasher models of comments different heights. Additional information and comments The different dishwasher models will be are contained in a narrow frame. named as follows: normal = dishwasher measuring Instructions for the user 80.5 cm high (built-in appliance)
Items included The following items are supplied: - dishwasher - operating instructions for operating the dishwasher - installation sheet for installing the dishwasher - other installation accessories for installing the dishwasher (see installation sheet) - funnel for filling the reactivation salt - additional printed matter and add- ons if required...
Guide to the appliance Machine overview a Top spray arm g Filter combination b Cutlery tray (depending on model) h Salt reservoir c Upper basket (depending on model) i Data plate d Middle spray arm j Rinse aid reservoir e Aeration valve k Detergent compartment f Lower spray arm...
Guide to the appliance Control field a On / Off button d Time display For turning the dishwasher on and e Timer button off. For selecting a later program start. b Program selection f Express button For reducing the program cycle time. Normal = Normal Pots g Indicator lights / refill reminders...
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
Initial commissioning Every dishwasher is tested at the Risk of scalding due to hot factory. There will be residual water in water. the machine from this test. It is not an During operation, water in the indication that the dishwasher has dishwasher may be very hot.
Initial commissioning Water softener If the water hardness in your area is available in a unit other than °dH, you In order to achieve good cleaning can convert the values as follows: results, the dishwasher needs to 1 °dH = 0.18 mmol/l = 1.78 °fH operate with soft water.
Initial commissioning Displaying and setting the water The value set for the water hardness is hardness level shown as a figure after in the time display. Open the door. 4 will start flashing in the time Turn the dishwasher off with the display.
Initial commissioning Reactivation salt Damage to the water softener from detergent. In order to maintain the functions of the water softener, it must be reactivated Dishwasher detergent will damage the water softener. regularly. Do not fill the salt reservoir with In order to be reactivated, the water powder or liquid detergent.
Initial commissioning Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 l of water to enable the salt to dissolve. Once the dishwasher has been used once, there is always sufficient water in the salt reservoir.
Initial commissioning Refilling the salt After the salt reservoir has been filled, the refill reminder may still appear in the When the Salt refill reminder lights display if the salt concentration has not up, wait until the end of the program yet reached the correct level.
Initial commissioning Rinse aid If you only ever wish to use combination detergent products in Rinse aid is necessary to ensure water your dishwasher, you do not need to does not cling and leave marks on add rinse aid. dishware during the drying phase and However, for optimum rinsing and helps dishware dry faster after it has drying results, use dishwasher...
Initial commissioning Adding rinse aid Close the lid firmly until you hear it click into place. Otherwise, water can enter the rinse aid reservoir during a program. Wipe up any spilled rinse aid. This prevents over-foaming occurring during the next program. Filling the rinse aid reservoir When the refill reminder Rinse aid appears in the display, the reservoir...
Page 28
Initial commissioning Open the door. Setting the rinse aid dosage You can adjust the rinse aid dosage for Turn the dishwasher off with the best results. button, if it is turned on. The rinse aid dosage can be set from 0 ...
Caring for the environment - You can connect the dishwasher to a Energy-saving dishwashing hot water supply. A hot water This dishwasher is exceptionally connection is particularly suitable economical in its use of water and with energy-saving water heating electricity. sources, such as solar energy with a For best results, follow these tips: circulation system.
Loading the dishwasher - The spray arms must not be blocked General information by items which are too tall or hang Remove coarse food residues from through the baskets. Test for free dishware. movement by manually rotating the spray arms. There is no need to pre-rinse items under running water.
Page 31
Loading the dishwasher Wash items not suitable for Damage due to caustic alkaline dishwashers: detergents. - Wooden cutlery and dishware or Aluminum parts (e.g., the grease items with wooden parts. These may filters of ventilation hoods) can be discolour and fade. The glue used in damaged by caustic alkaline these items is not dishwasher-proof detergents.
Loading the dishwasher Loading the FlexCare Cup Rack Upper basket You can put cups, small bowls, and flat See “Loading examples” under dishware on the FlexCare Cup Rack. “Loading the dishwasher” for Glasses can be arranged along the cup examples of how to load dishware and rack so they sit securely during the cutlery.
Page 35
Loading the dishwasher Adjusting the FlexCare Cup Rack You can set the height and depth of the cup rack at 2 different levels so that it can accommodate larger cups and so that taller items can be placed underneath it. Pull the cup rack upward and click it into the desired position (see arrow).
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Lift the basket up until it clicks into In order to gain more space for taller place. items in the lower basket or upper basket, the upper basket can be To lower the upper basket: adjusted on 3 levels with 3/4 "...
Loading the dishwasher Lowering the spikes Lower basket The spikes at the front are used for See “Loading examples” under washing plates, soup bowls, platters, “Loading the dishwasher” for dessert bowls, and saucers. examples of how to load dishware and cutlery.
Loading the dishwasher You can push the left insert to the Cutlery tray / cutlery basket middle in order to accommodate tall (depending on model) items and long stemmed glasses in the See “Loading examples” under upper basket. “Loading the dishwasher” for You can put large and long cutlery in examples of how to load dishware and the recessed middle part of the tray.
Loading the dishwasher Loading the cutlery basket Install the insert onto the cutlery basket if required. The cutlery basket can be placed anywhere on the front rows of spikes in the left or right corner of the lower basket. ...
Detergent There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Damage caused by using These detergents allow you to adjust unsuitable detergents. the amount dispensed according to Detergents that are not suitable for the amount of wash items and the domestic dishwashers can cause level of soiling.
Detergent Detergent dispensing Risk of chemical burns from detergent. The detergent compartment holds a Dishwasher detergents can cause maximum of 50 ml. burning on the skin and in the eyes, There are marks in the detergent nose, mouth, and throat. compartment to aid with dispensing: Avoid contact with detergents.
Detergent Adding detergent The detergent must not cause the detergent-compartment lid to get stuck. This can prevent the lid from opening during the program. Do not overfill the detergent compartment. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.
Operation Turning on the dishwasher Selecting a program Turn on the water supply faucet if it is Choose your program according to the turned off. type of load and the degree of soiling. Open the door. The different programs and their uses are described under “Program ...
Operation Display of program cycle time Starting a program Start the program by closing the door The cycle time of the program selected appears in hours and minutes in the within 4 seconds of the last press of a display before the program begins. If button.
Operation End of program Energy management The buzzers might sound at the end of To save energy, the dishwasher will the program. switch off automatically 10 minutes after the last time a button is pressed or The program has ended when : after the end of a program.
Operation Turning off the dishwasher Unloading the dishwasher Open the door. Dishware tends to break and chip more easily when it is hot. Allow dishware to The dishwasher can be turned off at cool until it is comfortable enough to any time using the button.
Operation Interrupting a program Cancelling or changing a program A program will be interrupted as soon as the door is opened. If a program is cancelled, important After 4 seconds, the indicator light of program stages may be missed. the selected program and the time A program should only be cancelled display will flash.
Options Timer Activating the timer Open the door. You can set the start time of a program. The program start time can be delayed Turn the dishwasher on with the for between 30 minutes and 24 hours. button. With start time delays between ...
Page 49
Options Starting a program before the time After you have activated the timer, all for the timer has elapsed: the displays will turn off after a few minutes to save energy. A program can be started before the time for the timer has elapsed. Press the button to switch the time Proceed as follows: display back on again for a few...
Program overview Program When to use Program sequence Pre- Main Interim Final Drying wash wash rinse rinse °F/°C °F/°C Program for regular use to completely 140– 133– Normal wash a full load of normally soiled 167/60 149/56 dishes with the ability to adjust energy –75 –65...
Page 51
Program overview Consumption Duration Energy Water Cold water Hot water Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C 50°F/10°C 120°F/49°C h:min h:min 1.06 1.20 3.2/12.1 3:04 2:43 1,35 0,85 14,0 3:11 3:03 0,90 0,40 13,0 2:44 2:28 1.10 1.15 2.9/11.0 1:13 0:58 0,75–1,05 0,45–0,55...
Program options Open the door. Express Turn the dishwasher on with the The Express program option reduces button. the program cycle time. The indicator light for the program In order to achieve optimum cleaning selected will flash. results, the temperature, and therefore the energy consumption, will increase ...
Program options Press the Program button 4 times. Buzzers The top left program indicator light will A sequence of buzzer tones will sound flash rapidly 4 times at intervals. at the end of the program or if there is a fault. The flashing sequence in the time display indicates whether the buzzers at The buzzers at the end of a program...
Program options Press the Program button 7 times. AutoOpen The top left program indicator light will In some programs, the door flash rapidly 7 times at intervals. automatically opens slightly to assist the drying process. The flashing sequence in the time display indicates whether the AutoOpen This program option can be deactivated program option is activated or not:...
Program options Press the Program button 9 times. Turning off the refill reminders The top left program indicator light will If you only ever use combination flash rapidly 9 times at intervals. detergent products containing salt and rinse aid in your dishwasher, you can The flashing sequence in the time turn off both refill reminders if you wish.
Program options Press the Program button 10 times. Extra clean The top left program indicator light will You can choose this program option to emit 1 long flash at intervals. increase the cleaning performance of the programs. The flashing sequence in the time display indicates whether the If you activate this program option, the Extra clean program option is activated...
Program options Press the Program button 11 times. Extra Dry The top left program indicator light will You can select this program option in emit 1 long flash and 1 short flash at order to increase the program drying intervals. performance. The flashing sequence in the time If you activate this program option, the display indicates whether the Extra dry...
Program options Press the Program button 19 times. Factory default settings The top left program indicator light will If you have altered any settings, you emit 1 long flash and 9 short flash at can reset them back to the factory intervals.
All surfaces are susceptible to dishwasher cleaner (available from scratching. Contact with unsuitable Miele Service or Miele’s online store). cleaning agents can alter or Follow the instructions on the product discolour all surfaces. packaging.
Cleaning and care To avoid damage to the outer Cleaning the door and the door surface, do not use: seal - cleaning agents containing soda, The door seal and the sides of the ammonia, acid or chloride dishwasher door are not accessed and cleaned by the spray arm jets.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray arm jets and bearings. The spray cutlery tray (if present).
Page 62
Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upward to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm anti-clockwise ...
Page 63
Cleaning and care Refitting the spray arms Inserting the cutlery tray (if present) Refit the upper spray arm and tighten Slide the cutlery tray back onto the it by hand. rails from the front. Refit the middle spray arm. ...
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soil from “Cleaning the spray arms” under the suds solution.
Page 65
Cleaning and care In order to clean the inside of the Rotate the screw thread clockwise filter, pull the microfilter on the plastic until the arrow in the viewing window ring downwards and away from the points to the lock symbol . filter combination.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a program, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove.
Page 67
Cleaning and care Damage caused by incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters.
The circuit breaker has tripped. Reset the circuit breaker (see data plate for the minimum fuse rating). If the circuit breaker trips again, contact Miele Service. The dishwasher is not switched on. Switch the dishwasher on with the button.
If the indicator lights flash again, there is a technical fault. Turn the dishwasher off. Close the faucet. Contact Miele Service. Fault : The Waterproof system has reacted. The drain pump may Turn the dishwasher off.
“Before using for the first time”) and turn the dishwasher back on again. If the same fault message appears again, contact Miele Service. The door locking pins do not retract after the door is opened. There may be a technical fault.
(see “Water drainage” under “Installation”). The dishwasher stops A technical fault has occurred. during a program. Turn the dishwasher off. Fault number 8 Close the faucet. appears in the time Contact Miele Service. display.
Frequently Asked Questions Water drainage fault Problem Possible cause and solution The dishwasher stops Before remedying the fault: during a program. Turn the dishwasher off. The alarm tone is Water drainage fault. sounding. There might be water in the wash cabinet. The /...
Frequently Asked Questions General dishwasher problems Problem Possible cause and solution The alarm tone is The safe mode of the dishwasher was activated. sounding. This takes place in the following instances: The indicator light of – if you do not close the door within 4 seconds of the selected program the last press of a button at program start and the time display will...
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking A spray arm is hitting the dishware. noise in the wash Carefully open the door and rearrange the cabinet. dishware that is obstructing the spray arm. There is a rattling noise Dishware is moving around in the wash cabinet.
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishware is not The dishware was not loaded correctly. clean. See notes under “Loading the dishwasher”. The program was not powerful enough. Select a more powerful program (see “Program overview”).
Page 76
Frequently Asked Questions Problem Possible cause and solution The dishware is not dry The rinse aid dosage is set too low or the rinse aid or glasses and cutlery reservoir is empty. are flecked. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see “Rinse aid”...
Page 77
Frequently Asked Questions Problem Possible cause and solution Plastic parts are Natural dyes, e.g., from carrots, tomatoes, or discoloured. ketchup may be the cause. The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes. ...
Page 78
Frequently Asked Questions Problem Possible cause and solution There are rust stains on The affected items are not corrosion resistant. cutlery. No remedy. Purchase cutlery which is dishwasher-proof. A program was not run after reactivation salt was added. Traces of salt have got into the normal wash cycle.
In the event of a fault which you cannot From March 1, 2021, information on remedy yourself, please contact your energy labelling and ecodesign Miele dealer or Miele Service. requirements will be available in the European Product Database (EPREL). Contact information for Miele Service...
These and many other useful products - Phosphate free – kind to the can be ordered directly from Miele’s environment online store, Miele Service, or from your Miele dealer. - Water-soluble wrapping – no need to unwrap Detergents...
Page 81
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher. Dishwasher cleaner - For use with the Clean Machine program without detergent dispensing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and...
A 5 ft (1.5 m) long, flexible metal which the dishwasher is being extension hose (tested to operated. 14,000 kPa / 140 bar) is available as an Connect the dishwasher to a drinking optional accessory from Miele specialist water supply. retailers or Miele Service.
Page 83
*INSTALLATION* Installation A faucet with a 9/16" male thread must Risk of damage due to excessive be provided on site. If this type of pressure. faucet is not available, only a qualified A brief increase in the water pressure installer may connect the dishwasher to can damage components of the the domestic water supply.
*INSTALLATION* Installation Water drainage Lay the drain hose so that it does not kink and is not being subjected to The appliance drainage system has a pressure or tugged. non-return valve, which prevents dirty water from flowing back into the ...
Page 85
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a program can cause the appliance to empty itself of water.
USA: 1-888-99-MIELE(64353) right side of the door. CDN: 1-800-565-6435 A damaged power cord must only be replaced with a genuine Miele cord Specifications by a Miele service technician. The dishwasher comes equipped with a 4 ft (1.2 m) power cord (measured from...
Page 87
*INSTALLATION* Installation Hardwired electrical connection Prior to making a hardwire It is possible to hardwire this appliance connection to the terminal, remove to an existing power cable. the powercord. Otherwise there will be a risk of electric shock from the ...
Sound emission testing Prerequisites for sound emission testing Load the dishwasher with 16 standard place settings and use the Normal program. Setup for sound emission testing The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. ...
Page 89
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Stick the insulating strip onto the front top edge of the base board .
Page 91
Please have the model and serial number of your appliance available when contacting Customer Service. Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.ca Customer Care Centre Phone: 800 565-6435 customercare@miele.ca Germany Manufacturer Miele &...