Page 1
AVH-2440NEX AVH-2400NEX AVH-1440NEX AVH-1400NEX DVD RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents Top menu screen ............20 Thank you for buying this Pioneer ■ Bluetooth ......22 product. Please read through these instructions Bluetooth connection ..........22 so you will know how to operate your Bluetooth settings............. 22 model properly. After you have finished Switching the connected Bluetooth device ..
Precaution Information to user –MODEL NO.: AVH-2440NEX, AVH-2400NEX, AVH-1440NEX, AVH-1400NEX FCC ID: EW4C95 IC: 4250A-C95 –This device complies with Part 15 of FCC Rules and Innovation, Science, and Economic Development Canada licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Page 6
CAUTION This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. CLASS 1 LASER PRODUCT CAUTION—CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW...
• If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
If your vehicle has a compliant backup camera that displays the backup view through the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Connection to the factory backup camera will require an adaptor, sold separately.
• To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below.
About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. Meanings of symbols used in this manual This indicates model names that are supported by the described operations. 0000NEX This indicates to touch the appropriate soft key on the touch screen.
LCD screen VOL (+/ Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 89).
Page 14
MENU Displays the DVD menu during DVD playback. Thumb pad Use to select a menu on the DVD menu. MUTE AUDIO Press to change the audio language, subtitle language or viewing angle SUBTITLE during DVD playback. ANGLE BAND/ESC Press to select the tuner band when tuner is selected as a source. Press to switch between media file types when playing the following types of data: •...
Basic operation Notes on using the LCD panel 2440NEX 2400NEX WARNING • Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. • Do not use with the LCD panel left open. It may result in injury in the event of an accident. •...
Press RESET with a pen tip or other pointed tools. Settings and recorded contents are reset to the factory settings. Preparing the remote control 2440NEX 1440NEX Remove the insulation sheet before use. How to replace the battery Insert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly.
Using the remote control Point the remote control in the direction of the front panel to operate. NOTE The remote control may not function properly in direct sunlight. Important • Do not store the remote control in high temperatures or direct sunlight. •...
Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings. Restore the default setting (page 108). Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers.
Page 19
Operating the time bar You can change the playback point by dragging the key. The playback time corresponding to the position of the key is displayed while dragging the key. Operating the menu bar Press The menu bar pops up on the screen. NOTE The menu bar availability may vary depending on the activating source.
Top menu screen Favorite source icons TIPS • When you connect the external navigation system to this unit, the navigation mode key is displayed at the middle of the right side of the display. • If you select [Power OFF], you can turn off almost all functions. –...
Page 21
Connected device key Displays connected device. Switches the source or application with connected devices such as AppRadio Mode +, external navigation system, etc. When a device with a compatible application is connected, the favorite application key appears. Once the key appears, you can adjust the range of the favorite application key area with the following steps.
Bluetooth Bluetooth connection Turn on the Bluetooth function on the device. Press Touch then The Bluetooth screen appears. Touch [Connection]. Touch The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system.
CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Menu Item Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device.
registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. • The icon for the cellular phone currently being used is displayed on the Phone menu screen.
Page 25
The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key.
Page 26
Touch Touch On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch ▶Dialing from the preset dial list Touch Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. ▶Deleting a phone number Press Touch...
Page 27
Press Touch Touch The voice recognition function launches and the voice control screen appears. TIPS • You can also launch the voice recognition function by pressing • If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone.
Page 28
Touch to turn private mode on or off. NOTES • If two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.
▶The received call and dialed number histories • You cannot make a call to the entry of an unknown user (no phone number) in the received call history. • If calls are made by operating your cellular phone, no history data will be recorded in this product.
Page 30
The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen Track number indicator Switches between playback and pause. Skips files forward or backward. • By pressing then touch , you can also skip files forward or backward. • By pressing then touch and hold , you can also perform fast reverse or fast forward.
Using AppRadio Mode + Important • Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content. • The content and functionality of the supported applications are the responsibility of the App providers.
Page 32
• If you connect your device to this product while an AppRadio Mode + compatible application is already running, the application operation screen will appear on this product. • The desired application is launched, and the application operation screen appears. •...
For smartphone (Android) users NOTES • [USB MTP] is set to [Off] to use AppRadio Mode + (page 89). • The video playback capability depends on the connected Android device. Unlock your smartphone and connect it to this product via USB. Refer to the Installation Manual.
Page 34
The audio mix menu will be displayed on the screen. Touch to mute. Touch again to cancel mute. Adjusts the audio volume. The AV operation screen and the Application screen can be switched by pressing - 34 -...
• Pandora® • Bluetooth® audio • SiriusXM® Satellite Radio • AV input (AV) • AUX • Car Sources (iDatalink) *1 AVH-2400NEX/AVH-1400NEX *2 AVH-2440NEX/AVH-1440NEX Displaying the AV operation screen Press then touch the AV operation key. The AV operation screen appears.
Displays the source list. Selecting a source Source on the AV source selection screen Press then touch Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list Press then touch AV operation key. Touch Touch the source key.
Adjusting the range of favorite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. Press Touch and hold appears at the top left of the favorite source icons. Drag to the desired position.
iPod/iPhone or smartphone connection for AV source When using an iPod/iPhone or a smartphone with this product, the settings are automatically configured according to the device to be connected. This section describes source compatibility for each device with the connection. NOTES •...
Connecting via Bluetooth The following sources are available when an iPod/iPhone is connected to the unit via Bluetooth. • iPod • Pandora • Spotify • Bluetooth audio Connect an iPod/iPhone with this product via Bluetooth (page 22). Press then touch Touch compatible desired source.
Compatible iPhone model • iPhone 4s For details about iPhone compatibility with this product, refer to the information on our website. You can connect and control an iPhone compatible with this product by using separately sold connector cables. Connecting via Bluetooth The following sources are available when an iPhone is connected to the unit via Bluetooth.
Page 41
Compatible smartphones Compatibility with all smartphones is not guaranteed. For details about smartphone compatibility with this product, refer to the information on our website. Connecting via Bluetooth The following sources are available when a smartphone is connected to the unit via Bluetooth.
HD Radio™ Technology/ Radio HD Radio Technology 2440NEX 1440NEX Radio 2400NEX 1400NEX About HD Radio stations HD Radio stations offer high quality audio and data services. HD Radio stations are brought to you by your local FM or AM stations. HD Radio stations feature the following: •...
Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.
Basic operation HD Radio, Radio screen HD Radio indicator and Signal type indicator Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band.
TIPS • By pressing then touch , you can also switch the preset channels. • By pressing then touch and hold and releasing it, you can also perform seek tuning. Storing the strongest broadcast frequencies (BSM) The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset channel keys [1] to [6].
Page 46
Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTE AM: [Level1] [Level2] [Level4] for FM and [Level2] for AM are available only with the stations with the strongest signals. * AVH-2440NEX/AVH-1440NEX - 46 -...
Disc Inserting and ejecting a disc You can play a normal music CD, Video-CD, or DVD-Video using the built-in drive of this product. WARNING 2440NEX 2400NEX Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.
Press Basic operation TIPS • By pressing then touch , you can also skip files/chapters forward or backward. • By pressing then touch and hold , you can also perform fast reverse or fast forward. • If a Video-CD with PBC (playback control) On is being played, appears.
Page 49
Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. Video source screen 1 Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
Page 50
Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left. Searches for the part you want to play. Touch [Title], [Chapter], [10Key], or [Track] then input the desired number from [0] to [9].
Page 51
Displays the DVD menu keypad. If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using these touch panel keys. Touch , or to select the menu item then touch NOTE The way to display the menu differs depending on the disc.
Compressed files Inserting and ejecting media You can play compressed audio, compressed video, or still image files stored in a disc or an external storage device. WARNING 2440NEX 2400NEX Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.
Press Plugging a USB storage device Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable. NOTES • This product may not achieve optimum performance with some USB storage devices. •...
For USB Press then touch Plug the USB storage device into the USB cable (page 53). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation TIPS • By pressing then touch , you can also skip files/chapters forward or backward.
Page 55
Skips files forward or backward. Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order. Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left.
Page 56
Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the left to the right. Selects the previous folder or the next folder. Constructs the database for using the Music Browse mode (page 56). Switches the current music information display.
Page 57
Video source screen (Example: Disc) Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback.
Page 58
Selects a file from the list. Touch a file on the list to playback. Touching a folder on the list shows its contents. You can play a file on the list by touching it. Skips files forward or backward. Still image source TIPS •...
Page 59
Saves the current images as the wallpaper. Touch the following items then touch [Yes] to overwrite the image. [As AVScreen]: Saves the image as the wallpaper for the AV screen. [As HomeScreen]: Saves the image as the wallpaper for the top menu screen. [As Both]: Saves the image as the wallpaper for both the AV screen and top menu screen.
iPod Connecting your iPod When connecting an iPod to this product, the settings are automatically configured according to the device to be connected. For details of the available connection, refer to iPod/iPhone or smartphone connection for AV source (page 38). NOTES •...
Page 61
Displays the link search screen. Select a song from the list related to the song currently playing. If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause.
Page 62
Audio source screen 2 Changes the audiobook speed. Normal—Fast—Slow Displays the hidden function bar. Apple Music® Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.com/music/ NOTE This function is only available when using the iPod function with an iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5, iPhone 5c, iPhone 4s or iPod...
Page 63
Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. •...
Pandora® Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com. The Pandora mobile application is available for iPhone and smartphones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information. WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.
Touch [Pandora]. Launch the Pandora application on the mobile device and start playback. • For details on Bluetooth connection, see page 22. • For details on USB connection, refer to the Installation Manual. Basic operation Playback screen Recalls the preset station stored to a key from the memory. Stores the current station to a key.
Page 66
Adds information for the track currently playing to bookmarks. Switches among connected devices. Selects a Pandora station from the list. • : Switches to the station list. • : Switches to the genre list. • : Plays only one track based on particular musical characteristics from several shuffled stations.
• Certain functions of the Spotify service are not available when accessing the service through Pioneer car audio/video products. • Spotify is a music service not affiliated with Pioneer. More information is available at https://support.spotify.com/. • The Spotify application is available for most iPhone and smartphone, please visit https://support.spotify.com/ for the latest compatibility information.
Press Touch then Touch [AV Source Settings]. Confirm that [Spotify] is turned on. Press then touch Touch [Spotify]. NOTES • For details on Bluetooth connection, see page 22. • For details on USB connection for iPhone, refer to the Installation Manual. Basic operation Playback screen 1 (Track) Switches between playback and pause.
Page 69
Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Selects a track or station from the list. Your Music: Selects a track or station from the list of saved song information. Browse: Selects a track from the category list.
Page 70
Playback screen 1 (Radio mode) Switches between playback and pause. Skips tracks forward or backward. By pressing then touch , you can skip songs forward. Starts new radio mode. Saves or deletes the current song information to or from Your Music. Displays the hidden function bar.
Page 71
Playback screen 2 (Radio mode) Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the left to the right. Gives a Thumbs Up to the playing track. Gives a Thumbs Down to the playing track and skips to the next track. - 71 -...
SiriusXM® Satellite Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy, and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscription are required.
Listening to SiriusXM Press then touch Touch [SiriusXM]. Basic operation TIPS • By pressing then touch , you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen. •...
Page 74
Performs TuneScan™ (page 75). Switches TuneMix™ to on or off. You can use TuneMix™ from each of the music channels stored as presets on the current band. NOTES • When fewer than two music channels are stored as presets, you cannot use TuneMix™.
Replay™ Mode (Time bar display) Switches between playback and pause. Performs content forward or backward. Performs fast forward or rewind. Switches between live broadcast mode and Replay™ mode. TuneScan™ When you activate the TuneScan™ feature, you will hear a few seconds of the songs which have not been listened to from each of the music channels stored as presets on the current band.
Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan. Cancels scan play and returns to the previous channel. SportsFlash™ SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams.
How to access When there is a Featured Favorite, access it with the band key. Touch the band key. SXM1—SXM2—SXM3—FF When there are multiple Featured Favorites, access them from the category list. It is displayed at the bottom of the category list (page 74). Parental lock The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content.
Page 78
Menu Item Description [Featured Favorites] Set to [On] to allow you to discover new channels created by [On] [Off] the SiriusXM Programming department. NOTE If the Featured Favorite Band needs to update, the Featured Band Update message will appear. [Featured Band To be notified when the featured seasonal theme is updated.
You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. NOTE A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.
Page 80
Hides the touch panel keys. To display the keys again, touch anywhere on the screen. You can set the screen size for the video image (page 107). Switches between the video input and audio input. - 80 -...
AV input You can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
MIXTRAX MIXTRAX is an original technology for creating non-stop mixes of selections from your audio library, complete with DJ effects. MIXTRAX EZ operation You can use this unit to play USB audio files. MIXTRAX EZ is used to add a variety of sound effects between songs for arranging the pauses between songs.
MIXTRAX settings Press Touch then The system setting screen appears. Touch [AV Source Settings]. Touch [MIXTRAX Settings]. Menu Item Description [Short Playback Mode] Specify the playback portion. [Off] [60s] [90s] [120s] [150s] [180s] [Random] [Display Effect] Set the effect display for MIXTRAX. [On] [Off] [Cut-In Effect] Set the effect tone that sounds when you skip tracks...
iDatalink Using iDatalink You can access the satellite radio source provided for the vehicle. The vehicle information and many OEM systems such as steering wheel controls, warning chimes, driver safety systems, and etc. can be displayed on this product by connecting the optional iDatalink adapter.
NOTE When the serial number input is required, input the device number of this product. Install the vehicle/head unit specific firmware on your iDatalink Maestro module. Connect this product to iDatalink Maestro, and then install this product to the vehicle. The iDatalink function will be active.
Page 86
Displays the Climate screen. Displays the Parking Assist screen. Gauges screen Vehicle Information screen Climate screen - 86 -...
Parking Assist screen Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. NOTE This function is only available for vehicles equipped with a parking sensor system.
Settings You can adjust various settings in the main menu. Displaying the setting screen Press Touch Touch one of the following categories, then select the options. System settings (page 88) Theme settings (page 95) Audio settings (page 96) Video settings (page 102) Bluetooth settings (page 22) System settings The menu items vary according to the source.
Page 89
[AUX Input] Set to [On] for AUX source (page 79). [On] [Off] *1 AVH-2440NEX/AVH-1440NEX *2 AVH-2400NEX/AVH-1400NEX [Camera settings] A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view camera function. (For details, consult your dealer.) ▶Rear view camera...
Page 90
* AVH-2440NEX/AVH-1440NEX CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the shift lever is moved to REVERSE (R) from another position.
Page 91
[System Language] Menu Item Description [System Language] Select the system language. NOTES • If the embedded language and the selected language setting are not the same, the text information may not display properly. • Some characters may not be displayed properly. [Restore Settings] Menu Item Description...
Page 92
• This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Menu Item Description [Touch panel calibration] Touch [Yes]. Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice.
Page 93
Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching You can use this function when [Dimmer Trigger] is set to [Time]. TIPS • Each touch of moves the cursor backward or forward in the 15 minute width.
Page 94
* With some pictures, you cannot adjust [Hue] and [Color]. NOTES • The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's headlights are off (daytime) and on (nighttime). • [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer Settings].
[OEM Settings] Menu Item Description [OEM Settings] (page 87). [OEM Volume Settings] Menu Item Description [OEM Volume Settings] (page 87). Theme settings The menu items vary according to the source. Menu Item Description [Background] Select the wall paper from the preset items in this product [Home] [AV] or original pictures via the external device.
Menu Item Description (off ) Hides the clock display. *1 Refer to Still image source (page 58). *2 You can preview the top menu screen or the AV operation screen by touching [Home] or [AV] respectively. Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute.
Page 97
Menu Item Description [Off] The volume does not change. [Source Level Adjuster] Adjust the volume level of each source to prevent radical [-4] to [+4] changes in volume when switching between sources other than FM. Touch to adjust the source volume after comparing the FM tuner volume level with the level of the source.
Page 98
Menu Item Description [Time Alignment] Select or customize the time alignment settings to reflect [On] [Off] the distance between the listener’s position and each Listening position*1*2 speaker. You need to measure the distance between the [Off] [Front-L] [Front-R] head of the listener and each speaker unit. [Front] [All] Touch to select the listening position then...
Page 99
Menu Item Description [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. [Off] Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal).
Page 100
▶Before operating the Auto EQ function • Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or cellular phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.
Page 101
Disconnect the iPhone or smartphone device. Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 36). Press Touch then Touch [A-EQ&TA Measurement]. Connect the microphone for acoustical measurement (sold separately) with this product.
NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press Touch then Touch [Crossover] or [Subwoofer Settings]. Touch to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set.
Page 103
Menu Item Description [TV Aspect] Set the aspect ratio suitable for your rear display 16:9 (wide screen display) or 4:3 (regular display). (We recommend use of this function only when you want to fit the aspect ratio to the rear display.) NOTES •...
Page 104
Menu Item Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. Touch [0] to [9] to input a four-digit code number. Touch Registers the code number, and you can now set the level.
Page 105
[Video Signal Setting] Menu Item Description [AV] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to an AV equipment. M] [PAL-N] [SECAM] [AUX] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to an AUX equipment.
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. NOTE Up to 12 menu items can be registered in the favorite menu. Creating a shortcut Press then touch...
Other functions Setting the time and date Touch the current time on the screen. Touch to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. •...
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. TIPS •...
• Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Apple CarPlay compatible device to this product via USB. Press Touch Touch [Apple CarPlay]. Touch Apple CarPlay icon in the tab. The application screen appears.
Page 111
Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.
• Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
The system setting screen appears. Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Android Auto™ compatible device to this product via USB. Press Touch Touch [Android Auto].
Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.
If the error persists, – Restart the smartphone. record the error message and contact your – Turn the ignition switch to OFF and dealer or your nearest Pioneer service then to ON. center. If the error message is still displayed after...
Lightning Lightning is a trademark of Apple Inc. • Pioneer accepts no responsibility for data lost from an iPod, even if that data is lost Apple CarPlay while using this product. Please back up your iPod data regularly.
Page 117
Content application(s) or service by its provider. • Pioneer is not liable for any issues that may arise from incorrect or flawed app- based content. • The content and functionality of the supported applications are the responsibility of the App providers.
– Park your vehicle in a safe place and here, contact your dealer or the nearest apply the parking brake. authorized Pioneer service facility. No video output from the connected Common problems equipment.
Page 119
– The operation is not possible. (For The picture is extremely unclear/ example, the DVD playing does not distorted and dark during playback. feature that angle, audio system, → The disc features a signal to prohibit subtitle language, etc.) copying. (Some discs may have this.) –...
– Stop the vehicle in a safe place and record the error message and contact your check the screen on the smartphone. dealer or your nearest Pioneer service center. The screen is displayed, but operation does not work at all.
Page 121
Pandora Spotify Error-19 Skip limit reached. → Skip limit reached. (Communication error occurred.) → Communication failed. – Do not exceed the skip limit. – Disconnect the cable from the iPod. – Spotify limits the total number of skips Once the iPod’s main menu is per hour.
Page 122
In your dealer or the nearest authorized Canada, visit www.siriusxm.ca or call Pioneer service center for assistance. 1-877-438-9677 if you have questions about your subscription. Check Tuner → The SiriusXM Connect Vehicle Tuner Channel Not Subscribed.
Page 123
– Requires two or more qualified music – Wait until this product returns to a channels to be stored as presets in the temperature within the normal current band. operating limits. Your device is not authorized to play this Disc DivX protected video.
Page 124
– Check that the USB connector or USB Protect cable is not caught in something or → All the files on the connected USB damaged. storage device are embedded with → The connected USB storage device DRM. consumes more than maximum –...
• At extremely high temperatures, a contact your dealer or an authorized temperature cutout protects this product Pioneer Service Station. by switching it off automatically. • Despite our careful design of the product, Handling and care of...
Codec High Definition) format. Do not Detailed information insert in AVCHD discs. If inserted, the disc may not be ejected. for playable media Playing DualDisc Compatibility • DualDiscs are two-sided discs that have a recordable CD for audio on one side and Common notes about disc a recordable DVD for video on the other.
Page 127
characteristics, scratches or dirt on the • You cannot connect a USB storage device disc, or dirt, scratches or condensation on to this product via a USB hub. the lens of the built-in drive. • Partitioned USB storage device is not •...
Page 128
DivX subtitle files • Maximum playback time of audio file stored on an USB storage device: 7.5 h • Srt format subtitle files with the (450 minutes) extension “.srt” can be used. • Only one subtitle file can be used for each CD-R/-RW DivX file.
Page 129
WMA compatibility without video data, DivX files encoded with LPCM (Linear PCM) audio codec • This product is not compatible with the • Depending on the file information following: Windows Media™ Audio 9.2 composition, such as the number of Professional, Lossless, Voice audio streams, there may be a slight CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW delay in the start of playback on discs.
Page 130
.avi • Files may not be able to be played back depending on the bit rate. Format: MPEG-4/DivX/H.264/H.263 Compatible video codec: MPEG-4 (Simple .mov Profile/Advanced Simple Profile)/DivX Format: MPEG-4/H.264/H.263 (Home Theater Profile)/H.264 (Base Line Compatible video codec: MPEG-4 (Simple Profile/Main Profile/High Profile)/H.263 Profile/Advanced Simple Profile)/H.264 (Baseline Profile 0/3) (Base Line Profile/Main Profile/High...
MIXTRAX IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF MIXTRAX is a trademark of the PIONEER THIS SOFTWARE, EVEN IF ADVISED OF THE CORPORATION. POSSIBILITY OF SUCH DAMAGE. Detailed information...
Limitations: Notice regarding video • Access to app-based connected content viewing will depend on the availability of cellular and/or Wi-Fi network coverage for the purpose of allowing your smartphone to Remember that use of this system for connect to the Internet. commercial or public viewing purposes •...
Heat visible. In that case, please consult your from the heater may break the LCD dealer or the nearest authorized Pioneer screen, and cool air from the cooler may Service Station. cause moisture to form inside this product, resulting in possible damage.
-10 ˚C to +60 ˚C (+14 ˚F to +140 ˚F) 10.0 A (Power off ) Dimensions (W × H × D): Audio (AVH-2440NEX/AVH-2400NEX) Maximum power output: • 50 W × 4 ch/4 Ω Chassis: • 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for 178 mm ×...
Page 137
Gain: Time alignment: +10 dB to -24 dB (1 dB/step) 0 to 140 step (1 inch/step) Phase: Normal/Reverse Bass boost: Time alignment: Gain: +12 dB to 0 dB 0 to 140 step (1 inch/step) Speaker level: Bass boost: +10 dB to -24 dB (1 dB/step) Gain: +12 dB to 0 dB DVD drive Speaker level:...
Page 138
H.264 video decoding format: Base Line Profile, Main Profile, High USB standard spec: Profile USB 1.1, USB 2.0 full speed, USB 2.0 high H.263 video decoding format: speed Base Line Profile 0/3 Max current supply: 1.5 A VC-1 video decoding format: USB Class: Simple Profile, Main Profile, Advanced MSC (Mass Storage Class), MTP (Media...
Page 139
CEA2006 Specifications Power output: < = 14 W RMS × 4 Channels (4 Ω and THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and design are subject to possible modifications without notice due to improvements. - 139 -...
Page 141
AVH-2440NEX AVH-2400NEX AVH-1440NEX AVH-1400NEX DVD RDS AV RECEIVER RÉCEPTEUR A/V RDS DVD RADIO AV RDS CON DVD Installation Manual Manuel d’installation Manual de instalación...
Page 142
Pioneer receiver unless it is connected risk of electric shock or other hazards, and on or after May 1, 2018 have rear visibility...
Page 143
(ACC ON), a control signal is output system) through the blue/white lead. Connect to This product an external power amp’s system remote Pioneer navigation system control terminal, the auto-antenna relay To power supply Contact your dealer to inquire about control terminal, or the antenna booster Power cord the connectable navigation unit.
Page 144
whether the car is moving forward or Rear speaker (STD) Power amp (sold backward. Middle range speaker (NW) Yellow/black separately) To Front output (STD) If you use an equipment with Mute To high range output (NW) function, wire this lead to the Audio Front speaker (STD) Mute lead on that equipment.
Page 145
iPhone with 30-pin connector allows you to check what is behind you Yellow (F.C IN) iPod/iPhone with while driving. (AVH-2440NEX/AVH-1440NEX) Lightning connector RCA cable (sold separately) Smartphone (Android™ WARNING View camera (sold separately) device) USE INPUT ONLY FOR REVERSE OR MIRROR NOTES IMAGE REAR VIEW CAMERA.
Page 146
Installation This product Yellow (V IN) Yellow (V OUT) Red, white (R IN, L IN) AUX input Mini-jack AV cable (CD-RM10) (sold Precautions before Before installing separately) installation Yellow • Consult with your nearest dealer if Red, white installation requires drilling holes or To Yellow other modifications of the vehicle.
Page 147
sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents. 5 cm Leave ample Microphone lead space Groove Microphone base Attach the microphone clip to the sun Mount the microphone on the visor.