hit counter script
LG M1962DP Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. M1962DP
  6. Owner's manual

LG M1962DP Owner's Manual

Monitor tv
Hide thumbs Also See for M1962DP:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
MONITOR TV
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR TV MODELS
M1962DP
M2062DP
M2262DP
M2362DP
M2762DP
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG M1962DP

Summary of Contents for LG M1962DP

  • Page 1 OWNER’S MANUAL MONITOR TV Please read this manual carefully before operating your set and retain it for future reference. MONITOR TV MODELS M1962DP M2062DP M2262DP M2362DP M2762DP www.lg.com...

  • Page 2: Table Of Contents

    CONTENTS PREPARATION MANUAL PROGRAMME TUNING (IN DIGITAL MODE) .........47 FRONT PANEL CONTROLS ......4 MANUAL PROGRAMME TUNING BACK PANEL INFORMATION ......5 (IN ANALOGUE MODE) ......49 STAND INSTALLATION ........6 PROGRAMME EDIT .........51 DETACHING STAND ..........8 IN DTV/RADIO MODE ........52 DETACHING STAND BODY ......10 IN TV MODE .............52 WALL MOUNT : HORIZONTAL INSTALLATION ..
  • Page 3 PRESET SOUND SETTINGS-SOUND MODE ..84 ONLY) ..............106 PRESET SOUND SETTINGS-USER MODE ...85 INPUT BLOCK ..........107 Surround X ............85 KEY LOCK ............108 AUDIO RESET ..........86 DIGITAL AUDIO OUT ........87 TV SPEAKERS ON / OFF SETUP ....88 TO USE A USB DEVICE DTV AUDIO SETTING (IN DIGITAL MODE ONLY) ......89 WHEN CONNECTING A USB DEVICE..109...

  • Page 4: Preparation

    PREPARATION FRONT PANEL CONTROLS ■ This is a simplified representation of the front panel. The image shown may be somewhat different from your set. Headphone Jack IR receiver (Remote controller receiver) INPUT Button MENU Button OK Button VOLUME Button PROGRAMME Button Power Button Power Indicator Illuminates blue when the set is switched on.

  • Page 5: Back Panel Information

    BACK PANEL INFORMATION ■ This is a simplified representation of the front panel. The image shown may be somewhat different from your set. PCMCIA (PERSONAL COMPUTER MEMORY CARD Power Cord Socket INTERNATIONAL ASSOCIATION) CARD SLOT This set operates on AC power. The voltage is indi- Insert the CI Module to PCMCIA CARD SLOT.

  • Page 6: Stand Installation

    PREPARATION <M1962DP/M2062DP/M2262DP/M2362DP> STAND INSTALLATION ■ The image shown may be somewhat different from your set. Carefully place the product screen side down Insert the Stand Base into the product. on a cushioned surface that will protect prod- uct and screen from damage.
  • Page 7 <M2762DP> STAND INSTALLATION ■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Insert the stand base into the product. Stand Base Use a Coin on the bottom of the stand base and turn the screw clockwise to tighten.

  • Page 8: Detaching Stand

    PREPARATION <M1962DP/M2062DP/M2262DP/M2362DP> DETACHING STAND ■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion Detach the monitor to the Stand Base by or soft cloth. turning the screw to the left.
  • Page 9 <M2762DP> DETACHING STAND ■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using a Coin.

  • Page 10: Detaching Stand Body

    ■ The image shown may be somewhat different from your set. ■ Remove the Stand Body in the same way as the following when using it as a Wall Hook. <M1962DP/M2062DP/M2262DP/M2362DP> 1. Remove the screw 2 point. 2. Pull the stand body.

  • Page 11: Wall Mount : Horizontal Installation

    * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 5-2) 787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. < Screw Mounting Interface Dimensions > Model M1962DP M2762DP M2062DP Wall Mount Pad M2262DP...

  • Page 12: Desktop Pedestal Installation

    PREPARATION DESKTOP PEDESTAL INSTALLATION ■ The image shown may be somewhat different from your set. For proper ventilation, allow a clearance of 10 cm on each side and from the wall. 10 cm 10 cm 10 cm 10 cm POSITIONING YOUR DISPLAY ■...

  • Page 13: Swivel Stand(Only M2762Dp)

    SWIVEL STAND(Only M2762DP) ■ The image shown may be somewhat different from your set. After installing the set, you can adjust the set manually to the left or right direction by 179 degrees to suit your viewing position. LOCATION Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat.

  • Page 14: Securing The Set To The Wall To Prevent Falling When The Set Is Used On A Stand (Only M2762Dp)

    PREPARATION SECURING THE SET TO THE WALL TO PREVENT FALLING WHEN THE SET IS USED ON A STAND (Only M2762DP) ■ The image shown may be somewhat different from your set. We recommend that you set up the set close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the set be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.

  • Page 15: Attaching The Tv To A Desk (Only M2762Dp)

    ATTACHING THE TV TO A DESK (Only M2762DP) ■ The image shown may be somewhat different from your set. The SET must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. 1-Screw (provided as parts of the product) Stand...

  • Page 16: Kensington Security System

    PREPARATION KENSINGTON SECURITY SYSTEM - The product is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.

  • Page 17: External Equipment Setup

    EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. Multi-family Dwellings / Apartments Wall (Connect to wall antenna socket)

  • Page 18: Hd Receiver Setup

    EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ The image shown may be somewhat different from your set. HD RECEIVER SETUP Connecting with a component cable Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the SET.
  • Page 19 Connecting a set-top box with a HDMI cable Connect the digital set-top box to HDMI/DVI IN jack on the SET Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) Select HDMI input source using the INPUT button on the remote control.
  • Page 20 EXTERNAL EQUIPMENT SETUP Connecting with an HDMI to DVI cable Connect the digital set-top box to HDMI/DVI IN jack on the SET. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the SET. Turn on the digital set-top box.

  • Page 21: Dvd Setup

    DVD SETUP Connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the SET. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the SET. Turn on the DVD player, insert a DVD.
  • Page 22 EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart cable Connect the Euro scart socket of the DVD to the AV IN Euro scart socket on the SET. Turn on the DVD player, insert a DVD. Select AV input source using the INPUT button on the remote control.
  • Page 23 Connecting the HDMI cable Connect the HDMI output of the DVD to the HDMI/DVI IN jack on the SET Select HDMI input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. NOTE ►Check that your HDMI cable is High Speed HDMI Cable.

  • Page 24: Vcr Setup

    EXTERNAL EQUIPMENT SETUP VCR SETUP ■ To avoid picture noise (interference), allow adequate distance between the VCR and SET. Connecting with a RF cable Wall Jack Antenna Connect the ANT OUT socket of the VCR to the ANTENNA / CABLE IN socket on the SET. Connect the antenna cable to the ANT IN socket of the VCR.
  • Page 25 Connecting with a Euro Scart cable Connect the Euro scart socket of the VCR to the AV IN Euro scart socket on the SET. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select AV input source using the INPUT button on the remote control.

  • Page 26: Insertion Of Ci Module

    EXTERNAL EQUIPMENT SETUP INSERTION OF CI MODULE - To view the encrypted (pay) services in digital TV mode. - This feature is not available in all countries. Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of SET as shown. For further information, see p.57 NOTE ►Check if the CI module is inserted into the PCMCIA card slot in the right direction.

  • Page 27: Digital Audio Out Setup

    DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

  • Page 28: Usb Setup

    EXTERNAL EQUIPMENT SETUP USB SETUP Connect the USB device to the USB IN jacks on the side of SET. After connecting the USB IN jacks, you use the USB function. (► p.109) Memory Stick USB Cable...

  • Page 29: Headphone Setup

    HEADPHONE SETUP You can listen the sound through the headphone. Plug the headphone into the headphone socket. To adjust the headphone volume, press the + or - button. If you press the MUTE button, the sound from the headphone is switched off. NOTE ►...

  • Page 30: Pc Setup

    EXTERNAL EQUIPMENT SETUP PC SETUP When using the remote control, aim it at the remote control sensor on the SET. When connecting with a D-sub 15 pin cable Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the SET.
  • Page 31 Connecting with an HDMI to DVI cable Connect the DVI output of the PC to the HDMI/DVI IN jack on the SET. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the SET. Turn on the PC and the SET. Select HDMI input source using the INPUT button on the remote control.
  • Page 32 EXTERNAL EQUIPMENT SETUP Connecting with an HDMI to HDMI cable Connect the HDMI output of the PC to the HDMI/DVI IN jack on the SET. Turn on the PC and the SET. Select HDMI input source using the INPUT button on the remote control.

  • Page 33: Back Cover For Wire Arrangement

    BACK COVER FOR WIRE ARRANGEMENT Tie cables together with a cable management as shown in the illustration.

  • Page 34: Supported Dispaly Resolution

    EXTERNAL EQUIPMENT SETUP SUPPORTED DISPALY RESOLUTION RGB[PC] / HDMI[PC] mode M1962DP M2262DP/M2362DP/M2762DP Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(kHz) Frequency(Hz) Frequency(kHz) Frequency(Hz) 640 x 480 31.469 59.94 720 x 400 31.468 70.08 640 x 480 37.5 640 x 480 31.469 59.94...
  • Page 35 HDMI - DTV mode Component mode Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(kHz) Frequency(Hz) Frequency(kHz) Frequency(Hz) 720 x 480 15.73 59.94 31.469 59.94 720 x 480 31.5 720 x 480 15.75 60.00 720 x 576 31.25 720 x 576 15.625 50.00 1280 x 720 37.500...

  • Page 36: Watching Tv / Programme Control

    WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. ꔰ Switches the set on from standby or off to standby. (POWER) Adjust the Energy Saving mode of the SET. ENERGY SAVING (►...
  • Page 37 VOLUME Adjusts the volume. UP/DOWN Displays the selected favourite programme. (► P. 59) Check and un-check programmes in the USB menu. MARK Selects your desired Aspect Ratio of picture. RATIO Switches the sound on or off. MUTE Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the...

  • Page 38: Turning On The Tv

    WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the / I, INPUT or Pꕌꕍ...

  • Page 39: Quick Menu

    QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ꔣ Aspect Ratio: Selects your desired picture for- ꕈ Sound Mode: It is a feature to automatically set mat.For Zoom Setting, select 14:9, Zoom and the sound combination which it deems the best Cinema Zoom in Ratio Menu.

  • Page 40: On Screen Menus Selection And Adjustment

    WATCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP PICTURE AUDIO Move Move Move Auto Tuning Aspect Ratio : 16:9 Auto Volume : Off Manual Tuning Picture Wizard...

  • Page 41: Auto Programme Tuning

    AUTO PROGRAMME TUNING (For countries other than Finland, Sweden, Denmark and Norway) Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1000. But the number may differ slightly depending on broadcasting signals.
  • Page 42 WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING (Only for Finland, Sweden, Denmark and Norway) DVB-C Auto Tuning is a menu for users in countries that support DVB cable. Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. If you want to select the Antenna, SETUP SETUP...
  • Page 43 If you want to select the Cable, ■ The image shown may be somewhat different from your set. Service Operator SETUP SETUP SETUP Move Move Move Auto Tuning ꔉ Auto Tuning ꔉ Auto Tuning ꔉ Auto Tuning Auto Tuning Auto Tuning Please select your TV Connection.
  • Page 44 WATCHING TV / PROGRAMME CONTROL • When you select the Cable, the Cable Service Operator selection screen can differ or not exist by the Cable situation of the applicable country • The popup window to select between Service Operator is only shown initially for the 3 cases when you accessing the Initial Setting menu, when you change from Antenna to Cable or when you access the menu after changing the Country.
  • Page 45 AUTO PROGRAMME TUNING If you select the “- -” of Country Setting, (Except for Finland, Sweden, Denmark and Norway) To watch DVB-C in the countries excluding Finland, Sweden, Denmark and Norway select '- -' as the Country in OPTION. You can select User mode or Full mode in Auto Tuning. The corresponding home frequency information may need to be changed when tuning the User mode, and the corresponding information depends on the Cable Service Operator (SO) in service.

  • Page 46: Cable Dtv Setting (In Cable Mode Only)

    WATCHING TV / PROGRAMME CONTROL CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, cor- responding function becomes non-activation.

  • Page 47: Manual Programme Tuning (In Digital Mode)

    MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland, Sweden, Denmark and Norway & When selecting Antenna if Finland, Sweden, Denmark, Norway or “--” country is chosen) SETUP SETUP Move...
  • Page 48 WATCHING TV / PROGRAMME CONTROL (When selecting Cable (DVB cable mode) if Finland, Sweden, Denmark, Norway or “--” country is chosen) SETUP SETUP Move Move Auto Tuning Auto Tuning ◄ ► ꔉ ꔉ Manual Tuning Manual Tuning Manual Tuning Manual Tuning Frequency(kHz) 36200 ➩...

  • Page 49: Manual Programme Tuning (In Analogue Mode)

    MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP SETUP Move Move Auto Tuning Auto Tuning ◄ ► Manual Tuning ꔉ Manual Tuning ꔉ Manual Tuning Manual Tuning ➩...
  • Page 50 WATCHING TV / PROGRAMME CONTROL SETUP SETUP Move Move Auto Tuning Auto Tuning ◄ ► Manual Tuning ꔉ Manual Tuning ꔉ Manual Tuning Manual Tuning ➩ Storage Programme Edit Programme Edit System Software Update : ON Software Update : ON Band V/UHF Diagnostics...

  • Page 51: Programme Edit

    PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P ꕌꕍ button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.

  • Page 52: In Dtv/Radio Mode

    WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE ■ Skipping a programme number • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be Select a programme number to be skipped. selected by the P ꕌꕍ buttons during TV viewing.
  • Page 53 ■ Auto Sort • After activating Auto Sort once, you can Start Auto Sort. YELLOW no longer edit programmes. ■ Skipping a programme number • When a programme number is skipped it Select a programme number to be skipped. means that you will be unable to select it using the P ꕌꕍ...

  • Page 54: Software Update

    WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP SETUP Move Move Auto Tuning Auto Tuning Manual Tuning Manual Tuning ➩ Programme Edit Programme Edit Software Update : On ꔉ...
  • Page 55 * When setting “Software Update” Occasionally, a transmission of Select the Yes using the < > but- After the Software Update is ton and you will see the following complete, the System restarts. updated digital software infor- picture. mation will result in the following menu on the TV screen.

  • Page 56: Diagnostics

    This displays the signal information and service name of the selected MUX. ( * MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) Engineering Diagnostics SETUP Move Manufacturer : LG Electronics Inc. Model / Type : M2762DP Auto Tuning Serial No. : SKJY1107 Manual Tuning Software Version : V01.08.00...

  • Page 57: Ci [Common Interface] Information

    CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer.

  • Page 58: Selecting The Programme List

    WATCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Programme List 1 BBC Mini Glossary ꔉ 2 BBC 3 BBC Displayed when Locked Programme. Exit. ■...

  • Page 59: Favourite Programme Setup

    FAVOURITE PROGRAMME SETUP ■ Selecting favourite programme Favourite programme is a convenient feature that lets you quikly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. Favourite ◄ ►...

  • Page 60: Input List

    WATCHING TV / PROGRAMME CONTROL INPUT LIST HDMI, AV, COMPONENT and RGB can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro- gramme in DTV/RADIO/TV mode.

  • Page 61: Epg (Electronic Programme Guide)(In Digital Mode)

    EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).

  • Page 62: Button Function In Now/Next Guide Mode

    EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. Change EPG mode. Programme Guide 1 YLE TV1 6 Apr. 2007 15:09 ▲ NEXT YELLOW 1 YLE TV1 That ’70s show Keno...

  • Page 63: Button Function In Date Change Mode

    Button Function in Date Change Mode Switch off Date setting mode. GREEN Programme Guide 6 Apr. 2007 15:09 1 YLE TV1 ▲ ◄ 6 Apr. (Fri.) ► 14:00 15:00 Antigues Roadshow Kungskonsumente 1 YLE TV1 Change to the selected date. 2 YLE TV2 Mint Extra TV2: Farmen...

  • Page 64: Button Function In Record/Remind Setting Mode

    EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out. This function is available only when recording equipment that use pin8 recording signalling has been con- nected to the TV-OUT(AV) terminal, using a SCART cable.

  • Page 65: Picture Control

    PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats: 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
  • Page 66 PICTURE CONTROL • 4:3 • Zoom The following selection will allow you to view The following selection will allow you to view a picture with an original 4:3 aspect ratio, the picture without any alteration, while filling gray bars will appear on both the left and the entire screen.

  • Page 67: Picture Wizard

    PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example.

  • Page 68: ꕊ Energy Saving

    PICTURE CONTROL ꕊ ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.

  • Page 69: Preset Picture Settings

    PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Cinema Optimizes video for watching movies. Sport Optimizes video for watching sports events. Game Optimizes video for playing games. PICTURE PICTURE Move...

  • Page 70: Manual Picture Adjustment

    PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated.

  • Page 71: Picture Improvement Technology

    PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”...

  • Page 72: Expert Picture Control

    PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, Expert 1 and Expert 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. PICTURE PICTURE Move...
  • Page 73 ■ Adjusts the contrast to keep it at the best level according to the brightness Dynamic Contrast of the screen. The picture is improved by making bright parts brighter and (Off/Low/High) dark parts darker. ■ Adjusts screen colours so that they look livelier, richer and clearer. This Dynamic Colour feature enhances hue, saturation and luminance so that red, blue, green (Off/Low/High )
  • Page 74 PICTURE CONTROL Expert Pattern ■ This is the pattern necessary for expert adjustment. (Off/Expert 1/Expert 2) ■ This function is enabled in "Picture Mode - Expert" when you watch DTV. Colour Filter ■ This is the function to filter the specific colours of the video. (Off/Red/Green/Blue) You can use the RGB filter to set colour saturation and hue accurately.

  • Page 75: Picture Reset

    PICTURE RESET Settings of the selected picture modes BACK to the default factory settings. PICTURE PICTURE Move Move ▲ ▲ • Brightness • Brightness • Sharpness • Sharpness ➩ • Colour • Colour All picture setting will be resetted. • Tint •...

  • Page 76: Screen Setup For Pc Mode

    PICTURE CONTROL SCREEN SETUP FOR PC MODE Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode. <Vertical resolution : 768> SCREEN Move Prev.
  • Page 77 Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
  • Page 78 PICTURE CONTROL 2. Using Auto Config. (Remocon) This function is available for RGB signals only. <M1962DP> Auto in progress Press Auto Config. Auto in progress Auto Config. For optimal display <1360 x 768 Resolution> change resolution 1360 x 768 <Others Resolution>...
  • Page 79 Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode: RGB[PC]. PICTURE SCREEN Move Move Prev. ▲...
  • Page 80 PICTURE CONTROL Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode: RGB[PC]. PICTURE SCREEN Move Move Prev. ▲ Resolution • Brightness • Sharpness ➩ Auto Config. • Colour Position To Set •...

  • Page 81: Sound Control

    SOUND CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.

  • Page 82: Clear Voice Ii

    SOUND CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off • Clear Voice II ◄ ► Clear Voice II : Off ꕅ3 Clear Voice II : Off ꕅ3...

  • Page 83: Balance

    BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off : Off ꕅ3 : Off ꕅ3 Clear Voice II Clear Voice II Balance ꔉ Balance ꔉ...

  • Page 84: Preset Sound Settings-Sound Mode

    SOUND CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropri- ate sound options based on the programme content.

  • Page 85: Preset Sound Settings-User Mode

    PRESET SOUND SETTINGS-USER MODE AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off : Off ꕅ3 : Off ꕅ3 Clear Voice II Clear Voice II Balance ➩ Balance Sound Mode : Music (User) ꔉ Sound Mode : Music (User) ꔉ...

  • Page 86: Audio Reset

    SOUND CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Move ▲ ▲ Sound Mode : Music Sound Mode : Music ➩ • Surround X : • Surround X : • Treble •...

  • Page 87: Digital Audio Out

    DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF (Sony Philips Digital InterFace) output to Dolby Digital.

  • Page 88: Tv Speakers On / Off Setup

    SOUND CONTROL TV SPEAKERS ON / OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.

  • Page 89: Dtv Audio Setting (In Digital Mode Only)

    DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want. AUDIO AUDIO Move Move ▲ ▲ Sound Mode : Music Sound Mode : Music •...

  • Page 90: I/Ii

    SOUND CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme num- ber and station name. Select Audio. Select the sound output. Broadcast On Screen Display Mono MONO Stereo STEREO...

  • Page 91: Nicam Reception (In Analogue Mode Only)

    NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select NICAM MONO or MONO.

  • Page 92: Time Setting

    TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set auto- matically by a digital signal.

  • Page 93: Auto On/Off Time Setting

    AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time.

  • Page 94: Sleep Timer Setting

    TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min. •...

  • Page 95: Option Setting

    OPTION SETTING ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. Select your desired language. Select your country. • If you want to change Language/ Country selection MENU Select OPTION.

  • Page 96: Language Selection (In Digital Mode Only)

    OPTION SETTING LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a select- ed language is not broadcast, the default language subtitle will be displayed.

  • Page 97: Audio Description (In Digital Mode Only)

    AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.

  • Page 98: Data Service

    OPTION SETTING DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected. OPTION OPTION Move...

  • Page 99: Input Label

    INPUT LABEL Selects a label for each input source. OPTION OPTION Move Move Menu Language : English Menu Language : English Audio Language : English Audio Language : English ➩ Subtitle Language : English Subtitle Language : English Disabled Assistance Disabled Assistance ◄...

  • Page 100: Power Indicator

    OPTION SETTING POWER INDICATOR Select the power indicator on of off. Power indicator On - Normal Mode: Blue LED On. - Off Mode: LED Off Power indicator Off - Normal Mode: Blue LED Off. - Off Mode: LED Off OPTION OPTION Move Move...

  • Page 101: Demo Mode

    DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode.

  • Page 102: Mode Setting

    OPTION SETTING MODE SETTING We recommend setting the TV to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is an optimal setting for displaying at stores.. OPTION OPTION Move Move ▲ ▲ Disabled Assistance Disabled Assistance Country : - -...

  • Page 103: Initializing(Reset To Original Factory Settings)

    INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of ꕋ Day and ꕋ Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup.

  • Page 104: Parental Control / Ratings

    PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’, ‘0’, ‘0’, ‘0’. If a channel is locked, enter the password to unlock it temporarily.

  • Page 105: Block Programme

    BLOCK PROGRAMME Blocks any programmes that you do not want to watch or that you do not want your children to watch. This function is available in Lock System “On”. Enter a password to watch a blocked programme. RADIO YLE TV1 LOCK Move 1 YLE TV1...

  • Page 106: Parental Control

    PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off.

  • Page 107: Input Block

    INPUT BLOCK Enables you to block an input. It is available to use this function in Lock System ”On”. LOCK LOCK Move Move Set Password Set Password Lock System : ON Lock System : ON ➩ • Block Programme • Block Programme •...

  • Page 108: Key Lock

    PARENTAL CONTROL / RATINGS KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. LOCK LOCK Move Move Set Password Set Password Lock System : Off Lock System : Off...

  • Page 109: To Use A Usb Device

    TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected.
  • Page 110 TO USE A USB DEVICE Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized. ►...

  • Page 111: Photo List

    PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440...
  • Page 112 TO USE A USB DEVICE Photo Selection and PopUp Menu Photo List Page 2/3 No Marked Drive1 Up Folder SG103 02/12/2010 SGKIM001 SG101 02/12/2010 SG104 02/12/2010 SG102 02/12/2010 SG105 02/12/2010 SGKIM001 02/12/2010 SGKIM005 02/12/2010 SGKIM002 02/12/2010 SGKIM006 02/12/2010 1366x768, 125KB SGKIM003 02/12/2010 SGKIM007...
  • Page 113 How to view photo Detailed operations are available on full-sized photo view screen. Photo List Page 2/3 No Marked Drive1 Up Folder SG103 02/12/2010 SGKIM001 SG101 02/12/2010 SG104 02/12/2010 SG102 02/12/2010 SG105 02/12/2010 SGKIM001 02/12/2010 SGKIM005 02/12/2010 SGKIM002 02/12/2010 SGKIM006 02/12/2010 1366x768, 125KB SGKIM003...
  • Page 114 TO USE A USB DEVICE Select the Slideshow , BGM, ꘤(Rotate), Delete , Option or Hide. • Use < > button to select the previous or ◄ 1/17 ► next photo. ꘤ Slideshow ꘡ BGM ꘡ Delete Option Hide Q.MENU •...
  • Page 115 Using the Photo List function Choose Options. Set Photo View Set Video. Set Audio. ◄ 1/17 ► ꕉ Previous ꘤ Slideshow ꘡ BGM ꘡ Delete Option Hide Q.MENU Show the PopUp menu. Select Set Photo View, Set Video or Set Audio. ►When you select the Set Photo View, Set Photo View.
  • Page 116 TO USE A USB DEVICE ►When you select the Set Video, Set Video. Picture Mode ◄ Vivid ► ● Backlight ● Contrast ● Brightness ● Colour ● Dynamic Contrast ◄ Medium ► ● Noise Reduction ◄ Medium ► ● Picture Reset ꕉ...

  • Page 117: Music List

    MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be sup- ported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV.
  • Page 118 TO USE A USB DEVICE Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. ► Play (During stop): Play the selected music titles. Music List Page 2/3 No Marked One playback of a piece of music finishes, the Title Duration Music...
  • Page 119 ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
  • Page 120 TO USE A USB DEVICE ►When you select the Set Audio Play, Set Audio Play. ◄ ► Repeat Random ꕉ Previous • When “Off” is selected in Repeat menu, Show the Set Audio Play. replay will stop once the last file in the list finishes playing.

  • Page 121: Movie List

    MOVIE LIST You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files.
  • Page 122 TO USE A USB DEVICE F i l e Video Decoder Audio Codec Extension Resolution name MPEG1, MPEG2 Dolby Digital, MPEG, MP3, LPCM mpeg, vob MPEG1 Dolby Digital, MPEG, MP3, LPCM MPEG2, H.264 / AVC Dolby Digital, AAC, MPEG ts,trp,tp MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.x, Dvix 6, Xvid 1.00, Xvid 1.01, Xvid Dolby Digital, HE-AAC,...
  • Page 123 Movie Selection and PopUp Menu Movie List Page 2/3 No Marked Title Duration Movie SGKIM002 Up Folder Favorite Music SGKIM001 SGKM002 01:34:15 640x480, 720KB 01:35:30 SGKIM001 SGKIM001 01:30:20 Up Folder Navigation Popup Menu Page Change MARK Mark Exit ► Play: Play the selected movie. Divx Play is executed while screen changes.
  • Page 124 TO USE A USB DEVICE Using the Movie List function, play Choose Options. Set Video Play. Set Video. Set Audio. ꕉ Previous Option Q.MENU Show the PopUp menu. Select Set Video Play, Set Video or Set Audio.
  • Page 125 ►When you select the Set Video Play, ► Picture Size: Selects your desired picture format during ◄ Full ► movie play. Picture Size ► Audio Language & Subtitle Language: Changes the Audio Language Language Group of the audio/subtitle during movie play. Subtitle Language ►...
  • Page 126 TO USE A USB DEVICE ►When you select the Set Video, Set Video. Picture Mode ◄ Vivid ► ● Backlight ● Contrast ● Brightness ● Colour ● Dynamic Contrast ◄ Medium ► ● Noise Reduction ◄ Medium ► ● Picture Reset ꕉ...
  • Page 127 Using the remote control When playing, repeatedly, press the REW(◄◄) button to speed up ◄◄(x2) → ◄◄◄ (x4) → ◄◄◄◄(x8) → ◄◄◄◄◄(x16) →◄◄◄◄◄◄(x32) . ◄◄ / ►► repeatedly, press the FF(►►) button to speed up ►►(x2) → ►►► (x4) → ►►►►...

  • Page 128: Divx Registration Code

    TO USE A USB DEVICE DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) Move Move...

  • Page 129: Deactivation

    DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the avail- able devices through the web server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.

  • Page 130: Teletext

    TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to- the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.

  • Page 131: Fastext

    FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. ■ Page selection Press the T.OPT button and then use ꕌꕍ button to select ꔻ menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.

  • Page 132: Digital Teletext

    DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.

  • Page 133: Appendix

    APPENDIX TROUBLESHOOTING The operation does not work normally. ■ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the set. The remote control ■...
  • Page 134 APPENDIX The video function does not work. ■ Station or cable product experiencing problems, tune to another sta- Poor reception on tion. ■ Station signal is weak, reorient antenna to receive weaker station. some channels ■ Check for sources of possible interference. Lines or streaks ■...
  • Page 135 ‘Unknown Product’ message appears when the product is connected. ■ Install the product driver, which is provided with the product, or down- load it from the web site. (http://www.lg.com) Did you install the driver? ■ See if the plug & play function is supported by referring to the video card user’s guide.
  • Page 136 APPENDIX Screen color is abnormal. ■ Set screen color resolution to more than 24 bits (true color) Screen has poor color res- Select control Pane → Display → Settings → Color Table menu in oluion (16_colors). Windows. Screen color is unstable ■...

  • Page 137: Maintenance

    MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new set. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.

  • Page 138: Product Specifications

    APPENDIX PRODUCT SPECIFICATIONS <M1962DP> 470.1mm Wide (18.51 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Screen Type LCD Panel Visible diagonal size: 470.1mm 0.30 mm (H) x 0.30 mm (V) Pixel Pitch 1360 x 768 @ 60 Hz Max.
  • Page 139 <M2062DP> 508.5 mm Wide (20.0 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Screen Type LCD Panel Visible diagonal size : 508.5 mm 0.2766 mm (H) x 0.2766 mm (V) Pixel Pitch 1600 x 900 @ 60 Hz Max.
  • Page 140 APPENDIX <M2262DP> 546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Screen Type LCD Panel Visible diagonal size: 546.86 mm 0.248 mm (H) x 0.248 mm (V) Pixel Pitch 1920 x 1080 @ 60 Hz Max.
  • Page 141 <M2362DP> 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Screen Type LCD Panel Visible diagonal size : 584.2 mm 0.265 mm (H) x 0.265 mm (V) Pixel Pitch 1920 x 1080 @ 60 Hz Max.
  • Page 142 APPENDIX <M2762DP> 686 mm Wide (27 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Screen Type LCD Panel Visible diagonal size: 686 mm 0.3114 mm (H) x 3114 mm (V) Pixel Pitch 1920 x 1080 @ 60 Hz Max.

  • Page 143: Ir Codes

    IR CODES • This feature is not available for all models. Code (Hexa) Function Note Energy Saving R/C BUTTON POWER R/C BUTTON (POWER ON/OFF) TV / PC R/C BUTTON INPUT R/C BUTTON RATIO R/C BUTTON TV/RAD R/C BUTTON Q.MENU R/C BUTTON MENU R/C BUTTON GUIDE...

  • Page 144: External Control Device Setup

    APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel.

  • Page 145: Set Id

    Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.150 OPTION OPTION Move Move Menu Language : English Menu Language : English Audio Language : English Audio Language : English Subtitle Language : English ➩...

  • Page 146: Communication Parameters

    APPENDIX Communication Parameters ■ Baud rate: 9600 bps ( UART ) ■ Stop bit: 1 bit ■ Data length: 8 bits ■ Communication code: ASCII code ■ Parity : None ■ Use a crossed (reverse) cable. Transmission / Receiving Protocol Transmission Command Reference List [Command1][Command2][ ][Set ID][ ][Data][Cr]...
  • Page 147 01. Power (Command: k a) 03. Screen Mute (Command: k d) ► To control Power On/Off of the set. ► To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Data 00 : Screen mute off (Picture on) Video mute off...
  • Page 148 APPENDIX 07. Brightness (Command: k h) 11. OSD Select (Command: k l) ► To select OSD (On Screen Display) on/off when control- ► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. ling remotely. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][l][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 149 15. Balance (Command: k t) 18. Auto Configure(Command: j u) ► To adjust balance. ► To adjust picture position and minimize image shaking You can also adjust balance in the AUDIO menu. automatically. It works only in RGB (PC) mode. Transmission Transmission [k][t][ ][Set ID][ ][Data][Cr]...
  • Page 150 APPENDIX 20. Programme Add/Skip(Command: m b) 22. Back Light (Command: m g) ► To set skip status for the current Programme. ► To Control the back light. Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Add Data : data Min: 00 to Max: 64 [b][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 151 UK Only...
  • Page 154 Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.

This manual is also suitable for:

M2062dpM2262dpM2362dpM2762dpM2262dp-pz.aeuM2262dp-pc.aeu

Table of Contents