Using the Auto Clean Function................17 Wireless Remote Control ................18 Ventilation......................19 Air Direction .....................19 Additional Features ..................19 SMART FUNCTIONS ..............20 LG ThinQ Application ..................20 Smart Diagnosis ....................21 MAINTENANCE ................23 Air Filter ......................23 TROUBLESHOOTING ..............24 Before Calling for Service ................24 Normal Sounds You May Hear ................24...
SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this product, follow basic precautions, including the following: INSTALLATION • Before use, the appliance must be properly installed as described in this manual. •...
Page 5
• If water enters the product, turn off the power at the main circuit, then unplug the product and call for service. • If the product has been submerged, contact the LG Electronics Customer Information Center for instructions before resuming use.
Page 6
CAUTION To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: INSTALLATION • Take care when installing the product that exhaust or condensation does not damage nearby property.
Page 7
REFRIGERANT (FOR R32 ONLY) WARNING • Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer. • The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames an operating gas appliance or an operating electric heater).
PRODUCT OVERVIEW Exterior Parts Interior Parts Control Panel Evaporator Remote Control Air Guide Air Filter Control Box Vertical Air Deflector (Horizontal Louver) Brance Horizontal Air Deflector (Vertical Louver) Compressor Air Inlet Condenser Front Grille Base Pan Cabinet Power Cord Air Outlet...
INSTALLATION Electrical Data WARNING Power cord may include a current interrupter • This appliance should be installed in device. TEST and RESET buttons are provided accordance with the National Electrical Code. on the plug case. The device should be tested on •...
Parts Included (Appearance May Vary) Heatproof foam (2) (Adhesive backed) Foam-PE (2) (Adhesive backed) Foam strip Right curtain (Non-adhesive) panel Frame guide (2) Window locking bracket Left curtain panel Sill bracket (2) Support bracket (2) Type “A” Screws Type “A” Screws Type “B”...
How to Install the Unit NOTE • All supporting parts should be secured to firm To prevent vibration and noise, make sure the wood, masonry, vinyl, fiberglass, or metal. unit is installed securely and firmly. • This product is a window air conditioner. As such, a standard single-hung or double-hung Install the unit out of direct sunlight.
Preparation of the Cabinet Insert the hooks on the lower panel guides into the slots on the bottom of the cabinet. Make sure that the flanges on the lower panel Remove 4 screws which fasten the cabinet at guides will face toward the inside of the room. both sides and at the back.
Cabinet Installation Carefully place the cabinet back in the window and align the cabinet track holes with the support brackets. Attach each support bracket Inside Sill Inside Sill to the cabinet through a cabinet track hole, Center Hole Center Hole using a type D screw and a lock nut.
Pull each curtain panel out until it meets the CAUTION window sash track. Pull the bottom window sash down behind the upper panel guide until • The unit is heavy. Use an assistant to help they meet. lift the unit and set it in place. Lifting and maneuvering the unit by yourself could result in injury.
Page 15
Before installing the front grille, fold out the Open and remove the inlet grille from the vent control lever located to the left of the product. Secure the front grille assembly with control panel, as shown below. 2 type A screws. Assemble the inlet grille to the front grille again.
OPERATION Control Panel and Remote Control Remote Control Auto Clean(3 s) Light Off(3 s) NOTE • The feature may be changed according to the type of model. Power Operation Mode Press the Mode button to cycle between 4 Press to turn the air conditioner ON or types of air conditioner operation: Energy OFF.
NOTE Wi-Fi • Auto Restart : If the air conditioner turns Enables connection of the air conditioner to off due to a power outage, it will restart the home Wi-Fi. automatically once the power is restored, with the same settings as were set before the unit Clean Filter turned off.
Wireless Remote Control Inserting Batteries If the display screen of the remote control begins to fade, replace the batteries. Insert AAA (1.5 V) batteries before using the remote control. Remove the cover on the back of the remote control. With the plus and minus poles facing as marked, insert two new AAA 1.5V batteries.
Ventilation Additional Features Push the ventilation lever in to the closed position Slinger Fan to maintain the best cooling performance. Pull the ventilation lever out to open the vent and draw This air conditioner is equipped with a slinger fan. fresh air into the room.
Internet service diagnose the problem. provider or refer to your wireless router manual. • LG ThinQ is not responsible for any Settings network connection problems or any faults, malfunctions, or errors caused by network Allows you to set various options on the appliance connection.
Installing the LG ThinQ Using LG ThinQ to Diagnose Application Issues Search for the LG ThinQ application from the If you experience a problem with your Wi-Fi Google Play Store or Apple App Store on a equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ smartphone.
Page 22
FCC Notice FCC RF Radiation Exposure Statement This following notice cover the transmitter module contained in this product. This equipment complies with FCC radiation This equipment has been tested and found to exposure limits set forth for an uncontrolled comply with the limits for a Class B digital device, environment.
MAINTENANCE Wash the filter using lukewarm water below WARNING 40 °C (104 °F). • Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops. Air Filter Check the air filter at least twice a month to see if cleaning is necessary.
TROUBLESHOOTING Before Calling for Service The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service. Normal Sounds You May Hear High Pitched Chatter Today’s high efficiency compressors may have a high pitched chatter during the cooling cycle.
Page 25
Problem Possible Causes & Corrective Action The air conditioner is unplugged. • Make sure the air conditioner plug is pushed completely into the outlet. The fuse is blown/circuit breaker is tripped. • Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.
Page 26
Remote control signal obstructed. prematurely. • Remove obstruction. Air conditioner is turned off. Can’t connect the LG • Turn the air conditioner on. ThinQ App. to the air Wireless router is turned off. conditioner. • Turn the router on.
Page 27
Problem Possible Causes & Corrective Action The password for the Wi-Fi network was entered incorrectly. • Delete your home Wi-Fi network and begin the registration process again. Mobile data for your smartphone is turned on. • Turn off the Mobile data of your smartphone before registering the appliance.
If during in-home service repair cannot be completed, it may be necessary to remove, repair and return the product. If in-home service is unavailable, LG may elect, at our option, to provide for transportation of our choice to and from a LG authorized service center.
Page 29
HOW TO OBTAIN WARRANTY SERVICE & ADDITIONAL INFORMATION: Call 1-800-243-0000 or visit our website at www.lg.com. Mail to: LG Customer Information Center (ATTN: CIC)
Page 30
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
Page 31
Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by...
Page 32
LG Customer Information Center 1-800-243-0000 Register your product Online! LG Electronics Inc. www.lg.com 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.