Table of Contents
Related Manuals for LG 60PN5000
Summary of Contents for LG 60PN5000
- Page 1 OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. 42PN4500 60PN6550 60PN5000 50PN5300 50PN6500 50PN4500 60PN5300 60PN6500 www.lg.com P/NO : MFL67701702 (1308-REV05)
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. WARNING/CAUTION Follow all instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN Do not use this apparatus near water. - Page 3 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a apparatus.
- Page 4 If you smell smoke or other odors coming from Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user’s Keep the product away from direct sunlight.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panel is a high technology product with resolution of two million to six million FCC NOTICE pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV.
-
Page 6: Licenses
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 7: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL LICENSES WATCHING TV Turning the TV on for the first time TABLE OF CONTENTS TROUBLESHOOTING INSTALLATION PROCEdURE EXTERNAL CONTROL dEVICE SETUP ASSEMBLING ANd PREPARING SPECIFICATIONS Unpacking Parts and buttons Additional information of the manual Lifting and moving the TV Setting up the TV... -
Page 8: Installation Procedure
The illustrations in this manual may differ from the actual product and item. Remote control, Owner’s manual, Power Cord CD manual Batteries (AAA) (See p.25) (For 42PN4500) (For 50PN4500, 60PN5000, (For 42PN4500) 50/60PN5300,50/60PN6500, 60PN6550) Stand Screws Stand Screws Desk-mount Screw (See p.14) - Page 9 ASSEMBLING AND PREPARING CAUTION Do not use any unapproved items to ensure the safety and product life span. Any damages or injuries by using unapproved items are not covered by the warranty. Some models appear to have a thin film on the screen. It is actually part of the screen, do not remove it. NOTE The items supplied with your product may vary depending on the model.
-
Page 10: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Remote control sensor Power indicator Screen Buttons Speakers Button Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. Changes the input source. -
Page 11: Additional Information Of The Manual
NOTE If the web page does not appear automatically, access My computer and then click LG and index. html to view the owner’s manual. Hold the top and bottom of the TV frame firmly. -
Page 12: Setting Up The Tv
Do not fasten the screws with too much force; otherwise they may be worn out and get loosened. For 42PN4500 3 EA M4 x 14 Stand Body For 50PN4500, 60PN5000, 50/60PN5300, 50/60PN6500, Front 60PN6550 3 EA M5 x 16... - Page 13 ASSEMBLING AND PREPARING To detach the stand, For 50PN4500, 50PN5300, 50PN6500 4 EA M5 x 16 1 EA M5 x 16 Protection cover NOTE Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
-
Page 14: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a table (For 42PN4500) Lift and tilt the TV into its upright position on a table. Fix the TV to a table to prevent from tilting forward, - Leave a 10 cm (4 inches) (minimum) space from damage, and potential injury. -
Page 15: Mounting On A Wall
Mounting on a wall Securing the TV to a wall (optional) (Depending on model) An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. -
Page 16: Tidying Cables
Use an by accident. authorized LG wall mount and contact the local dealer or qualified personnel. Gather and bind the cables with the cable holder. -
Page 17: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. -
Page 18: Connecting To A Hd Receiver, Dvd Player Or Vcr
MAKING CONNECTIONS Connecting to a HD receiver, DVD Player or VCR Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 19: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE When using the HDMI/DVI cable, Single link is only supported. -
Page 20: Component Connection
MAKING CONNECTIONS Component Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. Check to ensure each cable is matched with the corresponding color connection. -
Page 21: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. AUDIO IN (PC) AV IN AUDIO... -
Page 22: Connecting To A Pc
MAKING CONNECTIONS Connecting to a PC NOTE It is recommended to use an HDMI connection for the best image quality. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. - Page 23 MAKING CONNECTIONS Method B: dVI to HdMI Connection (*Not Provided) AUDIO IN (PC) AV IN AUDIO VIDEO L/MONO VIDEO AUDIO (*Not Provided)
-
Page 24: Connecting To An Audio System
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. Digital Optical Audio Connection Transmits the digital audio signal from the TV to an external device. -
Page 25: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 26 REMOTE CONTROL Adjusts the volume level. Accesses your favorite channel list. Selects a menu or option. AUDIO Digital signal: Changes the audio language. Analog signal: Changes the MTS sound. MUTE Mutes all sounds. ^ CH v Scrolls through the saved channels. ^ PAGE v Moves to the previous or next screen.
-
Page 27: Watching Tv
WATCHING TV WATCHING TV When the basic settings are complete, press OK. NOTE Turning the TV on for the first time If you do not complete the Initial setting, it will appear whenever the TV turns on. When you turn the TV on for the first time, the Initial Disconnect the power cord from the power outlet when you do not use the TV for a long setting screen appears. -
Page 28: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING General Problem Solution Cannot control the TV with the Check the remote control sensor on the product and try again. remote control. Check if there is any obstacle between the product and the remote control. Check if the batteries are still working and properly installed ( No image display and no sound is Check if the product is turned on. - Page 29 The station signal may be weak. Aim the antenna to the proper direction. Check if there is local interferences such as an electrical appliance or power tool. EXTERNAL CONTROL dEVICE SETUP To obtain the external control device setup information, please visit 'www.lg.com'.
- Page 30 19.6 kg (43.2 lbs) 25.4 kg (55.9 lbs) Without stand 18.4 kg (40.5 lbs) 24.0 kg (52.9 lbs) Current Value / Power consumption 2.1 A / 210 W 2.75 A / 275 W 60PN5000 (60PN5000-UA) 50PN5300 MODELS (50PN5300-UF) 60PN5300 (60PN5300-UF) Dimensions With stand 1,168.0 x755.4 x 292.7 (mm)
- Page 31 CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases.
- Page 32 The extended owner’s manuals that contain LG Customer Information Center information on the advanced features of this LG TV are located on the CD-ROM provided in an For inquires or comments, visit www.lg.com or call; electronic version. 1-800-243-0000 USA, Consumer User To read these files, you will need to use the personal computer (PC) equipped with a CD-ROM drive.
-
Page 33: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... - Page 34 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button Q.Menu R/C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R/C Button...
- Page 35 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 36 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) RS-232C IN Phone jack Type (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL &...
- Page 37 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 38 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 39 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute ► To control Power Off of the set. on, TV will not display OSD.
- Page 40 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 41 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 42 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 43 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) ► To change 3D option for TV. ► To change 3D mode for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01][Cr]...