hit counter script
Huawei S9300 Hardware Description
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Switch
  5. Quidway S9300
  6. Hardware description
Huawei S9300 Hardware Description

Huawei S9300 Hardware Description

Hide thumbs Also See for S9300:
Table of Contents

Advertisement

Quick Links

Quidway S9300 Terabit Routing Switch
V100R006C01
Hardware Description
Issue
02
Date
2012-04-30
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei S9300

Summary of Contents for Huawei S9300

  • Page 1 Quidway S9300 Terabit Routing Switch V100R006C01 Hardware Description Issue Date 2012-04-30 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

  • Page 3: About This Document

    About This Document Intended Audience This document provides an overall description of the S9300, details about each chassis and board, cables available to the device, and lists of components. This document describes hardware features of the S9300, which helps intended readers obtain detailed information about each chassis, board, and cable, and rapidly locate specific information through lists of components.
  • Page 4 Quidway S9300 Terabit Routing Switch Hardware Description About This Document Change History Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues. Changes in Issue 02 (2012-04-30) Based on issue 01 (2011-10-26), the document is updated as follows: The following information is modified: 5.6.4...

  • Page 5: Table Of Contents

    Quidway S9300 Terabit Routing Switch Hardware Description Contents Contents About This Document........................ii 1 Cabinets............................1 1.1 Introduction to the N66E Cabinet........................2 1.1.1 Appearance of the N66E Cabinet......................2 1.1.2 Technical Specifications of the N66E Cabinet..................2 1.1.3 Components of the N66E Cabinet......................3 1.1.4 Operating Environment of the N66E Cabinet...................4 1.1.5 Structural Features of the N66E Cabinet....................5...
  • Page 6 4.3.1 Air Filter of the S9312..........................48 4.3.2 Air Filter of the S9306..........................49 4.3.3 Air Filter of the S9303..........................50 4.4 Technical Specifications...........................50 4.4.1 Technical Specifications of the Fan Modules on the S9300..............50 5 Boards............................52 5.1 Introduction..............................55 5.1.1 Board Classification..........................55 5.1.2 Slot Distribution and Board Dimensions....................57 5.1.3 Relation Between Boards........................60...
  • Page 7 Quidway S9300 Terabit Routing Switch Hardware Description Contents 5.3.4 Interfaces..............................71 5.3.5 Interface Attributes..........................72 5.3.6 Technical Specifications..........................74 5.4 FSUA - Enhanced Flexible Service Unit......................75 5.4.1 Introduction.............................75 5.4.2 Function and Application........................75 5.4.3 Panel................................75 5.4.4 Technical Specifications..........................76 5.5 VSTSA - Stacking Card on the Main Control Board..................77 5.5.1 Introduction.............................77...
  • Page 8 Quidway S9300 Terabit Routing Switch Hardware Description Contents 5.10 G48T - 48-Port 10/100/1000BASE-T Interface Card (RJ45)................96 5.10.1 Introduction............................96 5.10.2 Function and Application........................96 5.10.3 Panel..............................96 5.10.4 Interfaces...............................97 5.10.5 Interface Attributes..........................98 5.10.6 Technical Specifications........................98 5.11 G48TBC-48-Port 10/100/1000BASE-T Interface Card (BC, RJ45)..............99 5.11.1 Introduction............................99 5.11.2 Function and Application........................99...
  • Page 9 Quidway S9300 Terabit Routing Switch Hardware Description Contents 5.16 X40SFC-40-Port 10GE Optical Interface Card (FC, SFP+)................116 5.16.1 Introduction............................116 5.16.2 Function and Application........................116 5.16.3 Panel..............................116 5.16.4 Interfaces.............................117 5.16.5 Interface Attributes..........................118 5.16.6 Technical Specifications........................119 5.17 G24CA - 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Interface Card (SFP/RJ45)...119 5.17.1 Introduction............................119...
  • Page 10 Quidway S9300 Terabit Routing Switch Hardware Description Contents 5.22 G24TFA-24-Port 10/100/1000BASE-T Interface Card(FA,RJ45)..............145 5.22.1 Introduction............................145 5.22.2 Function and Application........................145 5.22.3 Panel..............................145 5.22.4 Interfaces.............................146 5.22.5 Interface Attributes..........................147 5.22.6 Technical Specifications........................147 5.23 X12SA - 12-Port 10GE Optical Interface Card (SA, SFP+)................148 5.23.1 Introduction............................148 5.23.2 Function and Application........................148...
  • Page 11 6.2 AC Power Cable.............................178 6.2.1 Introduction............................178 6.2.2 Structure..............................179 6.2.3 Technical Specifications........................179 6.3 Ground Cable..............................180 6.3.1 Introduction............................180 6.3.2 Structure..............................180 6.3.3 Technical Specifications of the S9300 Ground Cables.................181 6.4 Console Cable..............................181 6.4.1 Introduction............................181 6.4.2 Structure..............................181 6.4.3 Technical Specifications........................182 6.5 Ethernet Cable..............................183 6.5.1 Introduction............................183 6.5.2 Structure..............................183...
  • Page 12 7.3 SRU Indicators...............................195 7.4 MCUA Indicators............................196 7.5 LPU Indicators..............................197 7.6 CMU Indicators..............................198 8 List of Boards..........................200 8.1 Boards Supported by the S9300........................201 8.2 Power Consumption and Weight........................204 9 List of Interface Attributes.......................206 9.1 Electrical Interface Attributes.........................207 9.2 10GE Optical Interface Attributes........................207 9.3 GE Optical Interface Attributes........................208...

  • Page 13: Cabinets

    Combined N68E cabinets are not equipped with side panels. When combining two cabinets, you must install side panels on the cabinets. Otherwise, heat dissipation of the S9300 is affected. 1.1 Introduction to the N66E Cabinet This topic describes the appearance, technical specifications, components, operating environment, and structural features of the N66E cabinet.

  • Page 14: Introduction To The N66E Cabinet

    Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets 1.1 Introduction to the N66E Cabinet This topic describes the appearance, technical specifications, components, operating environment, and structural features of the N66E cabinet. 1.1.1 Appearance of the N66E Cabinet This topic describes the appearance of the N66E cabinet. Being compliant with the IEC 60297-2 standard, the N66E cabinet is designed with a modular structure, which facilitates expansion and maintenance.

  • Page 15: Components Of The N66E Cabinet

    Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets Table 1-1 Technical specifications of the N66 cabinet Cabinet Maximum Dimensions (W x D x H) Weight of Type Installation Height an Empty Inside the Cabinet Cabinet N66E 46 U 600 mm x 600 mm x 2200 mm 73 kg ±...

  • Page 16: Operating Environment Of The N66E Cabinet

    Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets Figure 1-2 Components of the rear-serviceable N66E cabinet (1) Front door (2) Rack (3) Rear door (4) Side panels 1.1.4 Operating Environment of the N66E Cabinet This topic describes the ambient temperature and relative humidity in the operating environment of the N66E cabinet.

  • Page 17: Structural Features Of The N66E Cabinet

    Figure 1-3 shows the cable apertures. In the underfloor cabling mode, external cables enter the cabinet through the bottom of the cabinet. NOTE S9300 is in the overhead cabling mode. Figure 1-3 Cable apertures on the cabinet top 52mm 52mm Network...
  • Page 18 The S9300 adopts an air channel from the left to the rear side of the equipment for heat dissipation. l The airflow of S9300 in the cabinet is: front of the cabinet -> left side of the equipment -> inside the equipment ->...

  • Page 19: Introduction To The N68E Cabinet

    Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets Installation Scenarios The installation scenarios of the N66E cabinet are as follows: The cabinet can be installed on the concrete floor. The cabinet can also be installed on the antistatic floor. In this case, the N6X series supports are required.

  • Page 20: Technical Specifications Of The N68E Cabinet

    Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets Figure 1-6 Appearance of the N68E cabinet 1.2.2 Technical Specifications of the N68E cabinet The technical specifications of the N68E cabinet consist of the maximum installation height inside the cabinet, dimensions, and weight of an empty cabinet.

  • Page 21: Components Of The N68E Cabinet

    Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets NOTE l 1 U = 1.75 in. or 44.45 mm. U is the height unit defined in the IEC 60297 standard. l The weight of an empty cabinet includes the weight of the front door, rear door, left side panel, and right side panel.

  • Page 22: Structural Features Of The N68E Cabinet

    In the underfloor cabling mode, external cables enter the cabinet through the bottom of the cabinet. NOTE S9300 is in the overhead cabling mode. Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 23 Quidway S9300 Terabit Routing Switch Hardware Description 1 Cabinets Figure 1-8 Cable apertures on the cabinet top 52mm 52mm Network Network cable/fiber cable/fiber 312mm 312mm 130mm×15mm 130mm×15mm 312mm 312mm 145mm×65mm 145mm×65mm Reserved holes Power cable Front Door ESD Jack Before installing the N68E cabinet, you must wear an ESD-preventive wrist strap and ensure...
  • Page 24 The S9300 adopts an air channel from the left to the rear side of the equipment for heat dissipation. l The airflow of S9300 in the cabinet is: front of the cabinet -> left side of the equipment -> inside the equipment ->...

  • Page 25: Overview Of The S9300

    2.2 Hardware Structure This section describes the hardware structure of the S9300. 2.3 System Configuration and Physical Specifications This section describes the system configuration and physical specifications of the S9300. Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 26: Introduction

    This section describes the characteristics of the S9300. Position The S9300 is a high end Ethernet switch with large capacity and high performance. It mainly functions as an access node or aggregation node on the metropolitan area network (MAN) or a core switch on an enterprise network, providing Fast Ethernet (FE), Gigabit Ethernet (GE), and 10GE interfaces.
  • Page 27 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 Figure 2-1 Appearance and components of the S9312 (1) 1. LPU 2. SRU 3. Rack-mounting ear 4. Cable tray 5. PoE Power Module 6. CMU 7. Power supply...
  • Page 28 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 Figure 2-2 Appearance and components of the S9312 (2) 1. Air filter 2. Fan Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 Figure 2-3 Layout of slots on the S9312 SLOT12-LPU SLOT11-LPU SLOT10-LPU SLOT9-LPU SLOT8-LPU SLOT7-LPU SLOT14-SRU SLOT13-SRU SLOT6-LPU SLOT5-LPU SLOT4-LPU SLOT3-LPU SLOT2-LPU SLOT1-LPU The S9312 uses an integrated chassis of which the main components are described in Table 2-1.

  • Page 30: S9306

    NOTE The S9300 does not provide dedicated PoE power supplies. When an AC power supply is inserted into the PoE power slot, it is used as a PoE power supply, and provides power for powered devices (PDs) by using the Ethernet PoE electrical interface board.
  • Page 31 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 4. Cable tray 5. PoE Power Module 6. CMU 7. Power Supply Figure 2-5 Appearance and components of the S9306 (2) 1. Air filter 2. Fan Figure 2-6 Layout of slots on the S9306...

  • Page 32: S9303

    NOTE The S9300 does not provide dedicated PoE power supplies. When an AC power supply is inserted into the PoE power slot, it is used as a PoE power supply, and provides power for powered devices (PDs) by using the Ethernet PoE electrical interface board.
  • Page 33 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 Figure 2-7 Appearance and components of the S9303 (1) 1. Rack-mounting ear 2. Power supply 3. MCU 4. LPU 5. PoE Power Module 6. Cable tray Figure 2-8 Appearance and components of the S9303 (2) 1.

  • Page 34: System Configuration And Physical Specifications

    When an AC power supply is inserted into slots PWR1 to PWR4, it provides power for the entire device. 2.3 System Configuration and Physical Specifications This section describes the system configuration and physical specifications of the S9300. 2.3.1 System Configuration This section describes the switching capacity, backplane capacity, and forwarding rate of the S9300.

  • Page 35: Physical Specifications

    LPU port If more than six LPUs need to be installed, the power supplies, backplane, and cables of the switch must be upgraded and its nameplate must also be replaced. Contact Huawei technical support engineers. 2.3.2 Physical Specifications This section describes the dimensions, power consumption, weight, voltage, and working environment parameters of the S9300.
  • Page 36 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 Item S9312 S9306 S9303 Maximum 1400 W 800 W 350 W power (full configuration) Noise at 64.6 dB 61.6 db 58.6 db normal temperature Weight (full 70 kg...
  • Page 37 Quidway S9300 Terabit Routing Switch Hardware Description 2 Overview of the S9300 Item S9312 S9306 S9303 Storag -40°C to 70°C Humi Long- 5% RH to 85% RH, non-condensing dity term Short- 0% RH to 95% RH, non-condensing term Storag 0% RH to 95% RH, non-condensing...

  • Page 38: Power Supply

    3 Power Supply Power Supply About This Chapter This chapter describes the AC power supply and DC power supply of the S9300. 3.1 Introduction This section provides an overview of the AC power supply and DC power supply of the S9300.

  • Page 39: Introduction

    This section provides an overview of the AC power supply and DC power supply of the S9300. CAUTION l Do not install DC power supply and AC power supply on the same S9300. l Ensure that the S9300 is properly grounded before powering on it. l Power off the S9300 before removing the power supplies.
  • Page 40 Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Figure 3-1 Configuration of the S9312 power supplies AreaA Area B You can use DC power supplies or AC power supplies on the S9312. DC power supplies, 1+1 configuration Each power supply is configured in active area A and standby area B. The two power...
  • Page 41 Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply The S9312 can use two AC power supplies in 1+1 configuration or four AC power supplies in 2+2 configuration. You can select the 1+1 configuration or 2+2 configuration according to the power supply requirements of the system.
  • Page 42 Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply S9306 The power supplies are located in the PWR1 to PWR4 slots of the S9306. The DC power supplies and AC power supplies are supported. PWR1 and PWR2 are in area A, and PWR3 and PWR4 are in area B.
  • Page 43 The 2200 W power supply unit only provides PoE power, but does not provide power for the entire device. When the input voltage for an S9306 is 110 V, confirm with Huawei technical personnel to determine the power supply configuration.

  • Page 44: Power Supply Principle

    The 2200 W power supply unit only provides PoE power, but does not provide power for the entire device. When the input voltage for an S9303 is 110 V, confirm with Huawei technical personnel to determine the power supply configuration.
  • Page 45 Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Figure 3-4 Principle of the DC power supplies on the S9300 Board 2 Board n Board 1 Backplane RTN1 RTN2 -48V1/-60V1 -48V2/-60V2 PWR1 PWR2 -48/-60V -48/-60V -48V1/-60V1 -48V2/-60V2 RTN1 RTN2...

  • Page 46: Dc Power Supply

    This section describes the panel, functions, and technical specifications of the DC power supply on the S9300. 3.2.1 Appearance The S9300 supports the DC power supplies working in 1+1 backup mode. The power supplies are installed at the bottom of the chassis and are used for power input and power distribution.

  • Page 47: Panel

    Figure 3-6 Appearance of the DC power supply of the S9300 3.2.2 Panel Figure 3-7 shows the panel of the DC power supply. Figure 3-7 Panel and components of the DC power supply of the S9300 NEG(-) RTN(+) NEG(-) RTN(+) INPUT INPUT 1.

  • Page 48: Function Overview

    Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Indicator Color Description INPUT Green If the indicator is on, it indicates that the -48 V power input is normal. If the indicator is off, it indicates that the -48 V power input is unavailable.

  • Page 49: Ac Power Supply

    The 800 W AC power supply adopts the standard structure with a height of 3 U. Figure 3-8 shows the appearance of an 800 W AC power supply of the S9300. Figure 3-8 Appearance of the 800 W AC power supply of the S9300 3.3.2 Panel...
  • Page 50 Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Figure 3-9 Panel of the 800 W AC power supply FAULT FAULT 1. Power input 2. Handle 3. Switch 4. Indicator Table 3-4 describes the indicators of the 800 W AC power supply.

  • Page 51: Function Overview

    Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply 3.3.3 Function Overview The 220V AC power supply provides 800W power and the 110V power supply provides 400W power. In addition, the AC power supply supports EMC filtering and provides the following...

  • Page 52: Panel

    Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Figure 3-10 Appearance of the 2200 W AC power supply 3.4.2 Panel Figure 3-11 shows the panel of an 2200 W AC power supply. Figure 3-11 Panel of an 2200 W AC power supply...

  • Page 53: Function Overview

    Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Table 3-6 Description of indicators on an AC power supply Indicator Color Description Green If the indicator is on, it indicates that the AC power input is in the normal range.
  • Page 54 Quidway S9300 Terabit Routing Switch Hardware Description 3 Power Supply Table 3-7 Technical specifications of the AC power supply Item Specification Dimensions (height x 130 mm x 393 mm x 41 mm depth x width) Weight < 6.0 kg Rated input voltage 220 V AC/110 V AC;...

  • Page 55: Heat Dissipation System

    4 Heat Dissipation System Heat Dissipation System About This Chapter This chapter describes the heat dissipation system of the S9300, including fans and air filters. 4.1 Introduction This section provides an overview of the heat dissipation system of the S9300.

  • Page 56: Introduction

    4 Heat Dissipation System 4.1 Introduction This section provides an overview of the heat dissipation system of the S9300. 4.1.1 Heat Dissipation System of the S9312 The heat dissipation system ensures that the S9312 operates in the normal temperature. For the temperature requirements, see 2.3.2 Physical...

  • Page 57: Heat Dissipation System Of The S9303

    4.2.1 Constitution of the Fan Module The S9300 uses the modularized fans. The S9303, S9306, and S9312 use the same type of fans. The difference lies in the number of fans used on them. Installed at the rear of the subrack of...

  • Page 58: Panel Of The Fan Module

    Hardware Description 4 Heat Dissipation System the S9300, the fan modules are used to cool down the S9300. The fan modules support hot swapping and they can be exchanged. The fan module consists of the fan tray, two layers of fans, and the fan control board (FCB). For the technical specifications of the fan modules, see 4.4.1 Technical Specifications of the Fan...
  • Page 59 S9300When a fan is faulty, a trap is reported. If all fans are faulty, shut down the device. Each S9300 fan module serves a zone in the chassis and adopts the intelligent fan speed adjustment technology. The fan module monitors the temperature of key components and controls the temperature in each zone.

  • Page 60: Air Filter

    SLOT1-LPU Dynamic Fan Speed Adjustment By default, the S9300 adjusts fan speed according to board temperature. The user can configure the S9300 to adjust fan speed according both board temperature and optical module temperature. When either of the board temperature or optical module temperature exceeds the limit, the S9300 increases fan speed.

  • Page 61: Air Filter Of The S9306

    Figure 4-7 Air filter of the S9312 The air filters can be removed. For the method of removing and installing the air filters, see the Quidway S9300 Terabit Routing Switch Parts Replacement. 4.3.2 Air Filter of the S9306 The air filter and fan modules of the S9306 are installed separately. The S9306 has one air filter, which is inserted from the back of the equipment.

  • Page 62: Air Filter Of The S9303

    The air filter can be removed. For the method of removing and installing the air filter, see the Quidway S9300 Terabit Routing Switch Parts Replacement. 4.4 Technical Specifications This section describes the technical specifications of the fan module of the S9300. 4.4.1 Technical Specifications of the Fan Modules on the S9300 Table 4-2 shows the technical specifications of the fan modules on the S9300.
  • Page 63 Quidway S9300 Terabit Routing Switch Hardware Description 4 Heat Dissipation System Item Specification Maximum noise 62 dB Operating voltage -38.4 V DC to -72 V DC Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 64: Boards

    About This Chapter This chapter describes the boards supported by the S9300. 5.1 Introduction This section provides an overview of the boards supported by the S9300, including board classification, slot distribution, relation between boards, board appearances, and interfaces on each board.
  • Page 65 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards This section describes the 48-Port 100/1000BASE-X Interface Card (BC, SFP), including the appearance, functions and features, applicable device, slot, panel, indicators, interfaces, and technical specifications. 5.10 G48T - 48-Port 10/100/1000BASE-T Interface Card (RJ45)
  • Page 66 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.20 T24XA - 24-Port 10/100/1000BASE-T and 2-Port 10GBASE-X Interface Card(EA,RJ45/ XFP) This section describes the 24-Port 10/100/1000BASE-T and 2-Port 10GBASE-X Interface Card (EA,RJ45/XFP), including the appearance, functions and features, panel, interface attributes, and technical specifications.

  • Page 67: Introduction

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.1 Introduction This section provides an overview of the boards supported by the S9300, including board classification, slot distribution, relation between boards, board appearances, and interfaces on each board. 5.1.1 Board Classification The supports main control boards and Line Processing Units (LPUs).
  • Page 68 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Board Name Description Type l G24CA NOTE The LPUs are classified into S series boards, E series boards, l G24SA F series boards, B series boards boards, and POS boards: l X12SA l The S series boards are SA boards, for example, 24-port 100M/1000M Ethernet optical LPU (SA, SFP)-32K MAC.

  • Page 69: Slot Distribution And Board Dimensions

    XFP optical module. 5.1.2 Slot Distribution and Board Dimensions Slots Figure 5-1, Figure 5-2, and Figure 5-3 show the slots of the S9300. Figure 5-1 Slots of the S9312 Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 70 Figure 5-2 Slots of the S9306 Figure 5-3 Slots of the S9303 Table 5-2, Table 5-3, and Table 5-4 describe the slot distribution on the S9300. Table 5-2 Slot distribution of the S9312 Slot Quant Height Note 1-12 35 mm...
  • Page 71 19.8 mm Slots for MCUs in 1+1 backup mode Board Dimensions Table 5-5 provides the dimensions of each board of the S9300. For the definitions of depth, width, and height of a board, see Figure 5-4. Table 5-5 Board dimensions...

  • Page 72: Relation Between Boards

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.1.3 Relation Between Boards Figure 5-5 Figure 5-6 show the relation between boards on the S9300. Figure 5-5 Relation between boards on the S9312 and S9306 Master Slave Backplane Power Master...

  • Page 73: Interfaces On The Boards

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-6 Relation between boards on the S9303 Master Slave Backplane Power Master MCU control bus Slave MCU control bus 5.1.4 Interfaces on the Boards All interfaces are integrated on the boards are accessible from the board panel.
  • Page 74 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Interface Interface Interface Attribute Type Board Category Name LC/PC G48SA G48SC G48SD G48SBC G48SFA G48CEAT G24SA G24SC G24SD G24CA S24XA S24XC G24CEAS 10GE LC/PC X40SFC S24XA S24XC T24XA X12SA X4UXA X4UXC...

  • Page 75: Sru - Main Control Unit

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Interface Interface Interface Attribute Type Board Category Name RJ45 G48CEAT G48TFA G48TA G48TC G48TD G48TBC G48VA G24CEAS G24CA G24TFA T24XA Maintenance Ethernet 10M/100M auto- RJ45 electrical interface sensing MCUA interface Console...

  • Page 76: Function And Application

    The switching plane provides high-speed and non-blocking data channels to implement service switching between service modules. The S9300 supports double SRUs in 1:1 backup mode with the data switching units working in either 1+1 load balancing mode or 1:1 backup mode.

  • Page 77: Panel

    SRUs. When the master SRU fails, the slave SRU substitutes for the master SRU automatically to prevent service interruption. NOTE The SRUA and SRUB cannot be installed on the same S9300. 5.2.3 Panel Figure 5-7 Figure 5-8 show the appearances of the SRU panels.
  • Page 78 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-8 Appearance of the LE03SRUA and LE02SRUB panel Buttons and Indicators on the SRU Panel Table 5-8 describes the buttons and indicators on the SRU panel. Table 5-8 Description of the buttons and indicators on the SRU panel...

  • Page 79: Interfaces

    Console interface Used to connect to the console to implement on-site system configuration of the S9300. BITS interface The CLK1 and CLK2 interfaces on the SRU map the BITS0 and BITS1 interfaces of the clock board.
  • Page 80 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Compliance IEEE 802.3 standard Table 5-11 describes the attributes of the console interface. Table 5-11 Attributes of the console interface Attribute Description Connector type RJ45 Operation mode Full duplex Universal Asynchronous Receiver/Transmitter (UART)

  • Page 81: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Cable Time synchronization mode: time synchronization network cable, which is a common straight-through network cable with the RS422 interface level Clock synchronization mode: E1/T1 cable, which is a balanced cable with an impedance of 120 ohms.

  • Page 82: Function And Application

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.3.2 Function and Application Function Description The MCUA of the S9303 has the following functions: Providing out-band communication channels between boards. Providing high-precision stratum-3 clock and synchronous Ethernet clock conforming to IEEE 1588: These clocks ensure synchronization of interfaces and transmission clocks between LPUs.

  • Page 83: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-10 Appearance of the LE03MCUA panel Buttons and Indicators on the Panel Table 5-14 describes the buttons and indicators on the MCUA panel. Table 5-14 Description of the buttons and indicators on the MCUA panel...

  • Page 84: Interface Attributes

    BITS device or connected to the BITS interfaces of other products to synchronize the time and clock. NOTE Currently, the S9300 does not support external PoE power supplies. 5.3.5 Interface Attributes This section describes the attributes of the interfaces on the MCUA. Table 5-16 describes the attributes of the 10M/100M Base-TX Ethernet interface.
  • Page 85 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-17 Attributes of the console interface Attribute Description Connector type RJ45 Operation mode Full duplex Universal Asynchronous Receiver/Transmitter (UART) Compliance RS-232 standard Data equipment Data Circuit-terminating Equipment (DCE) type Table 5-18 describes the attributes of the RS485 interface.

  • Page 86: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Frame format l 1 pps + time of day (TOD) l DC Level Shifter (DCLS) l 2 MHz l 2 Mbit/s: HDB3 code l 1.544 Mbit/s: B8ZS code Compliance...

  • Page 87: Fsua - Enhanced Flexible Service Unit

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.4 FSUA - Enhanced Flexible Service Unit The FSUA is an optional and pluggable unit installed on the SRU to enhance the functions of the SRU. 5.4.1 Introduction The FSUA is installed on the SRU shown in Figure 5-11.

  • Page 88: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-12 Appearance of the FSUA panel Table 5-22 describes the buttons and indicators on the FSUA panel. Table 5-22 Description of the buttons and indicators on the FSUA panel Indicator/Button...

  • Page 89: Vstsa - Stacking Card On The Main Control Board

    5.5.1 Introduction The stacking card supported by the S9300 is called VSTSA. The VSTSA can be installed on the SRU of the S9306 or S9312 to provide switch stacking function. Figure 5-13 Position of VSTSA in SRU VSTSA 5.5.2 Function and Application...
  • Page 90 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-14 Appearance of the VSTSA panel 1. Master state indicator 2. Stack ID indicator 3. ACT/LINK indicator 4. RUN/ALM indicator Buttons and Indicators on the Panel Table 5-24 describes the buttons and indicators on the VSTSA panel.

  • Page 91: Interfaces

    The VSTSA provides four interfaces: S0-0, S0-1, S1-0, and S1-1. The S9300 currently supports the stack of up to two switches. When S9300A and S9300B are connected through VSTSAs, the interfaces are connected as Figure 5-15 shows.

  • Page 92: Cmu - Centralized Monitoring Unit

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-26 Technical specifications of the VSTSA Item Specification Board dimensions 243.7 mm x 170.0 mm x 35.1 mm (depth x width x height) Power 12 W consumption Weight 1 kg Long-term 0°C to 45°C...

  • Page 93: Panel

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Application The CMU is applied to the S9312 or S9306. There are two CMU slots on the subrack: one for the master CMU and the other for the slave CMU. You can install one or two CMUs as required.

  • Page 94: Interfaces

    RS485 interface Management interface of external PoE power supplies. NOTE Currently, the S9300 does not support external PoE power supplies. 5.6.5 Interface Attributes This section describes the attributes of the interfaces on the CMU. Table 5-29 describes the attributes of the RS485 interface.

  • Page 95: Spu - Vampa Vas Board

    5.7.1 Introduction Functioning as the value-added service (VAS) board of the S9300, the Service Process Unit (SPU) provides service functions such as load balancing, firewalls, Network Address Translation (NAT), IP Security (IPSec), and NetStream, thus meeting requirements of different application scenarios for diverse industry networks.
  • Page 96 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards The VAMPA functioning as an SPU is installed horizontally. The panel contains a serial interface (identified as CON) and an FE electrical interface (identified as ETH), as shown in Figure 5-18.

  • Page 97: Description Of Interfaces On The Spu

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.7.4 Description of Interfaces on the SPU This topic describes types, quantity, and functions of interfaces on the SPU. Table 5-33 describes VAMPA interfaces and functions. Table 5-33 VAMPA interfaces and functions...

  • Page 98: G48S - 48-Port 100/1000Base-X Interface Card (Sfp)

    5.8.1 Introduction The 48-port GE optical interface card (SFP) of the S9300 is called G48S for short. The G48S boards are classified into the following types: (EA, SFP), (EC, SFP), (ED, SFP) and (FA, SFP).

  • Page 99: Panel

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Function Description The G48S provides 48 GE optical interfaces to implement data access and wire-speed switching. Application The G48S can be installed in any LPU slot on the S9312, S9306, or S9303.

  • Page 100: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator/Button Color Description LINK Green-yellow If the indicator is on, it indicates that the link is connected. 5.8.4 Interfaces Interfaces Table 5-39 describes the types and functions of the interfaces on the G48S.
  • Page 101 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-41 Attributes of the SFP optical module (100M/1000M bit/s) Attri Description bute Tran 500 m 10 km 10 km (single- 40 km 40 km 80 km 100 km smiss mode bidirectional...

  • Page 102: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attrib Description Center 1471 1491 1511 1531 1551 1571 1591 1611 wavele ngth Transm 0 dBm to 5.0 dBm itting power Receiv -28.0 dBm sensitiv Overlo -9.0 dBm optical power Extinct 8.5 dB...

  • Page 103: G48Sbc-48-Port 100/1000Base-X Interface Card (Bc, Sfp)

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Item Specification Maximum power G48SA: 75 W consumption G48SC: 92 W G48SD: 110 W G48SFA: 65 W Weight G48SA: 2.54 kg G48SC: 2.66 kg G48SD: 2.66 kg G48SFA: 2.60 kg Long-term 0°C to 45°C...

  • Page 104: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-20 Appearance of the G48SBC panel 1234 RUN/ALM 1. ACT indicator of the 2. ACT indicator of the 3. Link indicator of the 4. Link indicator of the lower optical interfaces...

  • Page 105: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-46 Types and functions of the interfaces on the G48SBC Name Quantity Description 100M/1000M BASE-X The G48SBC provides forty-eight 100M/1000M optical interface Ethernet optical interfaces to transmit and receive services.
  • Page 106 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attri Description bute Tran -9.5 -9.0 -9.0 -9.0 -5.0 -5.0 -2.0 0 dBm smitt dBm to dBm to dBm to dBm to dBm to dBm to dBm to to 5 -2.5 -3.0...

  • Page 107: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attrib Description Overlo -9.0 dBm optical power Extinct 8.5 dB ratio Table 5-50 Attributes of optical/electrical modules Attribute Description Connector RJ45 Standards IEEE802.3z compliance Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network protocol 5.9.6 Technical Specifications...

  • Page 108: G48T - 48-Port 10/100/1000Base-T Interface Card (Rj45)

    5.10.1 Introduction The 48-port GE electrical interface card (RJ45) of the S9300 is called G48T for short. The G48T boards are classified into the following types: (EA, RJ45), (EC, RJ45), (ED, RJ45) and (FA, RJ45).

  • Page 109: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-21 shows the appearance of the G48T panel. Figure 5-21 Appearance of the G48T panel 9 11 1. Link/ACT indicators of the upper electrical 2. Link/ACT indicators of the lower electrical...

  • Page 110: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-54 Types and functions of the interfaces on the G48T Name Quantity Description 10M/100M/1000M The G48T provides 48 Ethernet electrical BASE-T electrical interfaces (10M/100M/1000M auto sensing) interface to transmit and receive Ethernet services.

  • Page 111: G48Tbc-48-Port 10/100/1000Base-T Interface Card (Bc, Rj45)

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Item Specification Short-term -5°C to 55°C temperature 5.11 G48TBC-48-Port 10/100/1000BASE-T Interface Card (BC, RJ45) This section describes the 48-Port 10/100/1000BASE-T Interface Card (BC, RJ45), including the appearance, functions and features, panel, and technical specifications.

  • Page 112: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Buttons and Indicators on the Panel Table 5-57 describes the indicators on the G48TBC panel. Table 5-57 Description of indicators on the G48TBC panel Indicator Color Description RUN/ALM Green l If the indicator is on, it indicates that the board is powered on, but the software is not running.

  • Page 113: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-59 Attributes of the 10M/100M/1000M Base-T Ethernet interface Attribute Description Connector type RJ45 Compliance IEEE 802.3z standard Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol 5.11.6 Technical Specifications Table 5-60 describes the technical specifications of the G48TBC.

  • Page 114: Function And Application

    5.12.2 Function and Application Function The G48VA of the S9300 consists of the following functional units: Data switching unit: consists of the CPU, LAN switch, and physical layer (PHY). PoE management unit: consists of the CPU and the Dual Inline Memory Module (DIMM).

  • Page 115: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-61 Description of buttons and indicators on the G48VA panel Indicator/Button Color Meaning RUN/ALM Green If the indicator is on, it indicates that the board is powered on but the software is not running.

  • Page 116: Technical Specifications

    5.13.1 Introduction The 36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X Interface Card(EA,RJ45/SFP) supported by the S9300 is called G48CEAT. The G48CEAT supports 32K MAC addresses. Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 117: Function And Application

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.13.2 Function and Application Function The G48CEAT provides 36-port 10M/100M/1000M Ethernet electrical interfaces and 12-port 100M/1000M Ethernet optical interfaces to implement data access and line-speed switching. Application The G48CEAT can be installed in any LPU slot of the S9312, S9306, and S9303.

  • Page 118: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator/Button Color Description If the indicator is on, it indicates that the board is faulty. Orange If the indicator is on, it indicates that the board is installed in a slot and the CBUS is powered...
  • Page 119 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Compliance IEEE 802.3z standard Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network protocol IP Table 5-68 Attributes of the SFP optical module (100M/1000M bit/s) Attri Description bute Tran 500 m...
  • Page 120 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-69 Attributes of 100M/1000M colorized optical modules Attrib Description Transm 80 km ission distanc Center 1471 1491 1511 1531 1551 1571 1591 1611 wavele ngth Transm 0 dBm to 5.0 dBm...

  • Page 121: Technical Specifications

    100BASE-FX Interface Card (EC, SFP), including the appearance, functions and features, panel, interface attributes, and technical specifications. 5.14.1 Introduction The 48-port FE optical interface card (SFP) of the S9300 is called F48S for short. The F48S boards are classified into the following types: (EA, SFP) and (EC, SFP). Table 5-73 provides the full name of the boards and capacities of the MAC address tables.

  • Page 122: Function And Application

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-73 Lists of F48S Full Name Short Name Capacity of MAC Address Table 48-Port 100BASE-FX Interface Card (EA, F48SA SFP) 48-Port 100BASE-FX Interface Card (EC, F48SC 128K SFP) 5.14.2 Function and Application Function Description The F48S provides 48 FE optical interfaces to implement data access and wire-speed switching.

  • Page 123: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-74 Description of buttons and indicators on the F48S panel Indicator/Button Color Description RUN/ALM Green If the indicator is on, it indicates that the LPU is powered on, but the software is not running.

  • Page 124: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Compliance IEEE 802.3u standard Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network protocol IP Table 5-77 Attributes of the SFP optical module (100 Mbit/s) Attrib Description Transm 2 km 15 km...

  • Page 125: F48T - 48-Port 10/100Base-T Interface Card (Rj45)

    RJ45) , including the appearance, functions and features, panel, and technical specifications. 5.15.1 Introduction The 48-port FE electrical interface card (RJ45) of the S9300 is called F48T for short. The F48T boards are classified into the following types: (EA, RJ45), (EC, RJ45) and (FA, RJ45).

  • Page 126: Function And Application

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.15.2 Function and Application Function Description The F48T provides 48 FE electrical interfaces to implement data access and wire-speed switching. Application The F48T can be installed in any LPU slot on the S9312, S9306, or S9303.

  • Page 127: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator/Button Color Description Orange If the indicator is in orange, it indicates that the board is inserted in the subrack and is installed, and the board is powered on. Link/ACT Green If the indicator is on, it indicates that the link is connected.

  • Page 128: X40Sfc-40-Port 10Ge Optical Interface Card (Fc, Sfp+)

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-83 Technical specifications of the F48T Item Specification Board dimensions 426.8 mm x 394.7 mm x 35.1 mm (depth x width x height) Maximum power F48TA: 59 W consumption F48TC: 70 W...

  • Page 129: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-27 Appearance of the X40SFC panel 1234 RUN/ALM 1. ACT indicator of the 2. ACT indicator of the 3. Link indicator of the 4. Link indicator of the lower optical interfaces...

  • Page 130: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-85 Types and functions of the interfaces on the X40SFC Name Quantity Description 10G BASE-X optical The X40SFC provides forty 10 Gbit/s optical interface interfaces to transmit and receive Ethernet services at 10 Gbit/s.

  • Page 131: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Fiber type OM1/OM2, multi- OM3, multi-mode Single-mode mode 5.16.6 Technical Specifications Table 5-88 describes the technical specifications of the X40SFC. Table 5-88 Technical specifications of the X40SFC Item Specification Dimensions (depth x 426.8 mm x 394.7 mm x 35.1 mm...

  • Page 132: Panel

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards By default, a combo interface works in the auto mode. In the auto mode, if the electrical interface is connected to a network cable first, the combo interface works as an electrical interface to transmit data;...

  • Page 133: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator/Button Color Description If the indicator is in red, it indicates that the LPU is faulty. Orange If the indicator is in orange, it indicates that the LPU is installed, and the board is powered...
  • Page 134 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-91 Interface attributes of the GE optical LPU (100M/1000M Base-SFP) Attribute Description Connector type LC/PC Optical interface Depending on the SFP optical module. attribute Compliance IEEE 802.3z standard Frame format...
  • Page 135 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attri Description bute Extin 9 dB 9 dB 6 dB 6 dB 9 dB 8.5 dB 9 dB 8 dB ction ratio Fiber Multi- Single-mode type mode Table 5-93 Attributes of 100M/1000M colorized optical modules...

  • Page 136: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Network protocol Table 5-95 Attributes of the 10M/100M/1000M Base-T Ethernet interface Attribute Description Connector type RJ45 Compliance IEEE 802.3z standard Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol 5.17.6 Technical Specifications Table 5-96 describes the technical specifications of the G24CA.

  • Page 137: Introduction

    24 optical interfaces. Among the 24 optical interfaces, there are eight Combo interfaces. NOTE When using the G24CEAS, install the CKM on the main control board. When the S9300 uses two main control boards, install CKMs on the two main control boards. 5.18.2 Function and Application...

  • Page 138: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 4. ACT indicators of the upper 5. Link indicators of the lower 6. Link indicators of the upper optical interfaces optical interfaces optical interfaces Buttons and Indicators on the Panel Table 5-97 describes the buttons and indicators on the G24CEAS panel.

  • Page 139: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Name Quantity Description 100M/1000M BASE- The G24CEAS provides 24 Ethernet optical X optical interface interfaces (100M/1000M auto sensing) to transmit and receive 1000 Mbit/s Ethernet services. NOTE A Combo interface works as either an optical interface or an electrical interface. You can run the combo- port { auto | copper | fiber } command to set the mode of the Combo interface.
  • Page 140 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attri Description bute Tran -9.5 -9.0 -9.0 -9.0 -5.0 -5.0 -2.0 0 dBm smitt dBm to dBm to dBm to dBm to dBm to dBm to dBm to to 5 -2.5 -3.0...

  • Page 141: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attrib Description Overlo -9.0 dBm optical power Extinct 8.5 dB ratio Table 5-102 Attributes of optical/electrical modules Attribute Description Connector RJ45 Standards IEEE802.3z compliance Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network protocol...

  • Page 142: S24X - 24-Port 100/1000Base-X And 2-Port 10Gbase-X Interface Card(Sfp/Xfp)

    (SFP/XFP), including the appearance, functions and features, panel, interface attributes, and technical specifications. 5.19.1 Introduction The S9300 supports S24X cards, including the S24XA-24-Port 100/1000BASE-X and 2-Port 10GBASE-X Interface Card(EA,SFP/XFP), and the S24XC-24-Port 100/1000BASE-X and 2- Port 10GBASE-X Interface Card(EC,SFP/XFP). Table 5-105 provides the full name of the boards and capacities of the MAC address tables.

  • Page 143: Panel

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Function The S24X provides 24 GE optical interfaces and two 10GE optical interfaces to implement data access and line-speed switching. Application The S24X can be installed in any LPU slot of the S9312, S9306, and S9303.

  • Page 144: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator/Button Color Meaning Amber If the indicator blinks, it indicates that data is being transmitted. LINk Green-yellow If the indicator is on, it indicates that the link is connected. 5.19.4 Interfaces Table 5-107 describes the types and functions of the interfaces on the S24X.
  • Page 145 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-109 Attributes of the SFP optical module (100M/1000M bit/s) Attr Description ibut Tran 500 m 10 km 10 km (single- 40 km 40 km 80 km 100 km smis mode...
  • Page 146 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-110 Attributes of 100M/1000M colorized optical modules Attrib Description Trans 80 km missio distanc Center 1471 1491 1511 1531 1551 1571 1591 1611 wavele ngth Trans 0 dBm to 5.0 dBm...

  • Page 147: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-112 Interface attributes of the optical interface card (10G Base-XFP) Attribute Description Connector type LC/PC Optical interface Depending on the SFP optical module. For details about the attributes attribute of the optical module, see Table 5-113.

  • Page 148: T24Xa - 24-Port 10/100/1000Base-T And 2-Port 10Gbase-X Interface Card(Ea,Rj45/Xfp)

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Parameter Description Power l S24XA: 65 W consumption l S24XC: 81 W Weight l S24XA: 2.4 kg l S24XC: 2.5 kg Long-term 0°C to 45°C temperature Short-term -5°C to 55°C temperature 5.20 T24XA - 24-Port 10/100/1000BASE-T and 2-Port...

  • Page 149: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-31 Appearance of the T24XA panel 1. Link/ACT indicators of the upper electrical 2. Link/ACT indicators of the lower electrical interfaces interfaces Buttons and Indicators on the Panel Table 5-115 describes the buttons and indicators on the T24XA panel.

  • Page 150: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-116 describes the types and functions of the interfaces on the T24XA. Table 5-116 Types and functions of the interfaces on the T24XA Name Quantity Description 10M/100M/1000M The T24XA provides 24 Ethernet electrical...

  • Page 151: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Network protocol Table 5-119 Attributes of the XFP optical module (10 Gbit/s) Attribute Description Transmissi 300 m 10 km 40 km 80 km on distance Center 850 nm 1310 nm...

  • Page 152: G24S - 24-Port 100/1000Base-X Interface Card (Sa, Sfp)

    5.21.1 Introduction The 24-port 100M/1000M optical interface card (SFP) of the S9300 is called G24S for short. The G24S boards are classified into the following types: (SA, SFP), (EC, SFP), and (ED, SFP).
  • Page 153 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-32 Appearance of the G24SA panel 1. ACT indicators of the 2. ACT indicators of the 3. Link indicators of the 4. Link indicators of the lower optical interfaces upper optical interfaces...

  • Page 154: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator/Button Color Description Amber If the indicator blinks, the data is being transmitted or received. LINK Green-yellow If the indicator is on, it indicates that the link is connected. 5.21.4 Interfaces Table 5-123 describes the types and functions of the interfaces on the G24S.
  • Page 155 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-125 Attributes of the SFP optical module (100M/1000M bit/s) Attri Description bute Tran 500 m 10 km 10 km (single- 40 km 40 km 80 km 100 km smiss mode bidirectional...

  • Page 156: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attrib Description Center 1471 1491 1511 1531 1551 1571 1591 1611 wavele ngth Transm 0 dBm to 5.0 dBm itting power Receiv -28.0 dBm sensitiv Overlo -9.0 dBm optical power Extinct 8.5 dB...

  • Page 157: G24Tfa-24-Port 10/100/1000Base-T Interface Card(Fa,Rj45)

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Item Specification Maximum power G24SA: 45 W consumption G24SC: 63 W G24SD: 75 W Weight G24SA: 2.22 kg G24SC: 2.66 kg G24SD: 2.66 kg Long-term 0°C to 45°C temperature Short-term -5°C to 55°C temperature 5.22 G24TFA-24-Port 10/100/1000BASE-T Interface Card...

  • Page 158: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-34 Appearance of the G24TFA panel RUN/ALM 1. Link/ACT indicators of the upper electrical 2. Link/ACT indicators of the lower electrical interfaces interfaces Buttons and Indicators on the Panel Table 5-129 describes the indicators on the G24TFA panel.

  • Page 159: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-130 Types and functions of the interfaces on the G24TFA Name Quantity Description 10M/100M/1000M The G24TFA provides 24 10M/100M/1000M BASE-T Ethernet BASE-T Ethernet electrical interfaces to transmit electrical interface and receive Ethernet services at 1000 Mbit/s.

  • Page 160: X12Sa - 12-Port 10Ge Optical Interface Card (Sa, Sfp+)

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.23 X12SA - 12-Port 10GE Optical Interface Card (SA, SFP This section describes the 12-port 10GE optical interface card (SA, SFP+), including the appearance, functions and features, applicable device, slot, panel, indicators, interfaces, and technical specifications.

  • Page 161: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-133 Description of buttons and indicators on the X12SA panel Indicator/Button Color Meaning RUN/ALM Green If the indicator is on, it indicates that the board is powered on but the software is not running.

  • Page 162: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Optical interface Depending on the SFP optical module. For details about the attributes of attribute the optical module, see Table 5-136. Compliance IEEE 802.3ae standard Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP...

  • Page 163: X4Ux - 4-Port 10Gbase-X Interface Card (Xfp)

    5.24.1 Introduction The 4-port 10GE optical interface card (XFP) of the S9300 is called X4UX for short. The X4UX boards are classified into the following types: (EA, XFP) (EC, XFP)and (ED, XFP).

  • Page 164: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-36 shows the appearance of the X4UX panel. Figure 5-36 Appearance of the panel of the X4UX Buttons and Indicators on the Panel Table 5-139 describes the buttons and indicators on the X4UX panel.

  • Page 165: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-140 Types and functions of the interfaces on the X4UX Name Quantity Description 10G BASE-X optical The X4UX provides four 10GE BASE-X interface optical interfaces to transmit and receive 10 Gbit/s Ethernet services.

  • Page 166: Technical Specifications

    X Interface Card (EC, XFP), including the appearance, functions and features, panel, interface attributes, and technical specifications. 5.25.1 Introduction The 2-port 10GE optical interface card (XFP) of the S9300 is called X2UX for short. The X2UX boards are classified into the following types: (EA, XFP) and (EC, XFP). Table 5-144 provides the full name of the boards and capacities of the MAC address tables.

  • Page 167: Function And Application

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-144 Lists of X2UX Full Name Short Name Capacity of MAC Address Table 2-Port 10GBASE-X Interface Card (EA, X2UXA XFP) 2-Port 10GBASE-X Interface Card (EC, X2UXC 128K XFP) 5.25.2 Function and Application...

  • Page 168: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-145 Description of buttons and indicators on the X2UX panel Indicator/Button Color Description RUN/ALM Green If the indicator is on, it indicates that the LPU is powered on, but the software is not running.

  • Page 169: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Compliance IEEE 802.3ae standard Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network protocol IP Table 5-148 Attributes of the XFP optical module (10 Gbit/s) Attribute Description Transmissio 300 m 10 km...

  • Page 170: Ckm - Clock Board

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Item Specification Long-term 0°C to 45°C temperature Short-term -5°C to 55°C temperature 5.26 CKM - Clock Board This section describes the CKM, including the appearance, functions and features, and technical specifications.

  • Page 171: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-38 Clock board appearance 5.26.4 Interfaces The CLM has two BITS interfaces, corresponding to the CLK1 and CLK2 interfaces on the main control board. Table 5-150 describes the types and functions of the two BITS interfaces.

  • Page 172: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.26.5 Interface Attributes Table 5-151 describes the attributes of the BITS interfaces. Table 5-151 Attributes of the BITS interfaces Attribute Description Connector type RJ45 Operation mode Transmission rate: l Clock frequency synchronization: 2 MHz, 2 Mbit/s, 1.544 Mbit/s.

  • Page 173: Function And Application

    (in compliance with T1 and E1 standards) NOTE l When using the WMNPA, insert the CKM into the MPU. If the S9300 uses two MPUs, the CKMs must be installed on both the MPUs. l When using the WMNPA, insert at least one subcard; otherwise, the WMNPA does not function properly.

  • Page 174: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-39 Appearance of the WMNPA panel RUN/ALM 1. Subcard Buttons and Indicators on the Panel Table 5-154 describes the indicators on the WMNPA panel. Table 5-154 Description of indicators on the WMNPA panel...

  • Page 175: P4Cf-4-Port Oc-3C/Stm-1C Pos-Sfp

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-155 Technical specifications of the WMNPA Item Specification Dimensions (depth 426.8 mm x 394.7 mm x 35.1 mm x width x height) Maximum power l With two P1UF subcards: 84 W...

  • Page 176: Panel

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Application The 4-port OC-3c/STM-1c POS-SFP is an optional subcard which can be installed on the WMNPA. Users can choose to install this subcard according to the service requirement, which improves service flexibility and expansibility.

  • Page 177: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Indicator Description LINK/ACT If the indicator is on, the link functions properly. (green) If the indicator blinks, data is being transmitted or received. If the indicator is off, it indicates that the link is Down.

  • Page 178: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-160 Attributes of the 155 Mbit/s SFP optical module Attribute Description Transmission 2 km 15 km 40 km 80 km distance Center 1310 nm 1310 nm 1310 nm 1550 nm...

  • Page 179: P4Hf-4-Port Oc-12C/Stm-4C Pos-Sfp

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.29 P4HF-4-Port OC-12c/STM-4c POS-SFP This section describes the 4-port OC-12c/STM-4c POS-SFP, including the appearance, functions and features, panel, interface attributes, and technical specifications. 5.29.1 Introduction The 4-port OC-12c/STM-4c POS-SFP provides 622 Mbit/s optical interfaces. This subcard is applicable to the aggregation layer of MPLS networks.

  • Page 180: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Figure 5-41 Appearance of the 4-port OC-12c/STM-4c POS-SFP FPIC panel PIC - 4 O C - O × Buttons and Indicators on the Panel Table 5-163 describes the indicators on the 4-port OC-12c/STM-4c POS-SFP FPIC panel.

  • Page 181: Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Table 5-164 Types and functions of the interfaces on the 4-port OC-12c/STM-4c POS-SFP FPIC Name Description ntity OC-12c/STM-4c The 4-port OC-12c/STM-4c POS-SFP FPIC provides four POS-SFP optical 622 Mbit/s optical interfaces to transmit and receive interface services.

  • Page 182: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Receiver -31.0 dBm -30.0 dBm -30.0 dBm sensitivity Overload -8.0 dBm -8.0 dBm -8.0 dBm optical power Fiber type Single-mode Single-mode Single-mode 5.29.6 Technical Specifications Table 5-167 describes the technical specifications of the 4-port OC-12c/STM-4c POS-SFP FPIC.

  • Page 183: Function And Application

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards 5.30.2 Function and Application Function Table 5-168 describes the functions of the 1-port OC-48c/STM-16c POS-SFP. Table 5-168 Functions of the 1-port OC-48c/STM-16c POS-SFP Function Description Supported protocol and PPP, HDLC service...

  • Page 184: Interfaces

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Buttons and Indicators on the Panel Table 5-169 Description of indicators on the 1-port OC-48c/STM-16c POS-SFP FPIC panel Indicator Description STATUS (green) If the indicator blinks once every 2s (0.5 Hz), it indicates that the system is running properly.

  • Page 185: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Attribute Description Network protocol IP Table 5-172 Attributes of the 2.5 Gbit/s SFP optical module Attribute Description Transmission 2 km 15 km 40 km 80 km distance Center 1310 nm 1310 nm...
  • Page 186 Quidway S9300 Terabit Routing Switch Hardware Description 5 Boards Item Specification Long-term temperature 0°C to 45°C Short-term temperature -5°C to 55°C Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 187: Cables

    6 Cables Cables About This Chapter This chapter describes the DC power cables and AC power cables of the S9300, including the structures and technical specifications of DC power cables and AC power cables. 6.1 DC Power Cable This section describes the structure and technical specifications of the DC power cables.

  • Page 188: Dc Power Cable

    This section describes the structure and technical specifications of the DC power cables. 6.1.1 Introduction The power cables of the S9300 consist of the power cables in the cabinet and power cables out of the cabinet. The external power cables connect the power distribution cabinet to the power distribution box, and the internal power cables connect the power distribution box to the S9300 in the cabinet.
  • Page 189 Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Technical Specifications of the DC Power Cables in the Cabinet Table 6-1 Technical specifications of the DC power cables in the cabinet Item Specification -48 V power cable Electronic and electrical cable-600 V-UL3386-5.2...

  • Page 190: Ac Power Cable

    6.2 AC Power Cable This section describes the structure and technical specifications of the AC power cables. 6.2.1 Introduction The power cables of the S9300 include: Internal power cables, which are in the chassis Issue 02 (2012-04-30) Huawei Proprietary and Confidential...

  • Page 191: Structure

    An external power cable transmit power from the user's power distribution frame to the power distribution box in the cabinet, and then an internal power cable transmits power from the power distribution box to the S9300 in the cabinet. Internal power cables are classified into:...

  • Page 192: Ground Cable

    This section describes the structure and technical specifications of the ground cables. 6.3.1 Introduction The ground cables connect the S9300 and cabinet to the ground. The ground cables in the front, rear, and side panels of the cabinet have been properly connected before delivery.

  • Page 193: Technical Specifications Of The S9300 Ground Cables

    This section describes the structure and technical specifications of the Console cable. 6.4.1 Introduction The Console cable is used to connect the S9300 Console port to the serial port of the Console to transmit the configuration data of the S9300.

  • Page 194: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Figure 6-3 Console cable 1. Direction A 2. DB25 plug 3. Label 4. Network port connector RJ45 5. Direction B 6. Direction C 7. DB9 plug W1 and W2 communication cables...

  • Page 195: Ethernet Cable

    Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Item Specification Connector Network interface connector-Crystal connector-8PIN-8 bits-Connector Connector Cable connector-D style-9PIN-Plug Fire- resistance 6.5 Ethernet Cable This section describes the structure and technical specifications of the Ethernet cables. 6.5.1 Introduction Ethernet cables are classified into the straight-through cable and the crossover cable.
  • Page 196 Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Figure 6-4 Structure of RJ45 Table 6-9 describes pin assignments of the straight-through cable. Table 6-10 describes pin assignments of the crossover cable. Table 6-9 Pin assignments of the straight-through cable...

  • Page 197: Technical Specifications

    Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Connector Connector X2 Color Relation X1.7 X2.7 White/Brown 6.5.3 Technical Specifications Table 6-11 describes the technical specifications of the straight-through cable. Table 6-12 describes the technical specifications of the crossover cable.

  • Page 198: Introduction

    Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables 6.6.1 Introduction Table 6-13 provides the types of optical fibers used by the S9300. Table 6-13 Types of the optical fibers Cable and Use Local Remote Cables Connector Connector Fiber connecting the...

  • Page 199: Technical Specifications

    One end of the clock cable is the RJ45 connector, which is connected to the BITTS interface on the SRU or MCU of the S9300. The other end of the clock cable is connected to the external clock device. The connector type depends on the type of the external clock device. The external...

  • Page 200: Structure

    6-7. Figure 6-7 Structure of the 120Ω trunk cable NOTE When the connected device is RJ45 clock source, the RJ48 cables are used for the connection of S9300 and the RJ45 clock source. Issue 02 (2012-04-30) Huawei Proprietary and Confidential...

  • Page 201: Technical Specifications

    Figure 6-8 Structure of the straight-through cable NOTE When the connected device is RJ45 time source, the RJ45 cables is used for the connection of S9300 and the RJ45 time source. When the connected device is SMB clock source or BNC clock source, the RJ45 cable is used for the connection of S9300 and transmultiplexer.
  • Page 202 Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Cable Description Length Trunk cable-15 m-120 ohm-1E1-0.4 mm-(8-bit network interface-II)- 15 m (120CC4P0.4P430U(S))-(8-bit network interface-II) Trunk cable-30.00 m-120 ohm-1E1-0.4 mm-(8-bit network interface-II)- 30 m (120CC4P0.4P430U(S))-(8-bit network interface-II)-Expert Trunk cable-60.00 m-120 ohm-1E1-0.4 mm-(8-bit network interface-II)- 60 m (120CC4P0.4P430U(S))-(8-bit network interface-II)-Expert...

  • Page 203: Stack Cables

    This section describes the structure and technical specifications of the stack cables. 6.8.1 Introduction The stack cables of the S9300 are the QSFP high-speed cables, which interconnect the interfaces on the VSTSA cards. The S9306s or S9312s are connected through the stack cables to form a logical switch, thus implementing packet forwarding.
  • Page 204 Quidway S9300 Terabit Routing Switch Hardware Description 6 Cables Item Description Fire-resistance UL VW-1 (UL758) or CM (UL444) or CL2 (UL13) or FT4 Color Black or Blue Number of cores Length 10 m Bend radius 75 mm Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright ©...

  • Page 205: List Of Indicators

    7 List of Indicators List of Indicators About This Chapter This chapter describes the status and meanings of the indicators on the S9300, including the indicators of boards, fan modules, and power supplies. 7.1 Fan Module Indicators This section describes the fan module indicators.

  • Page 206: Fan Module Indicators

    Quidway S9300 Terabit Routing Switch Hardware Description 7 List of Indicators 7.1 Fan Module Indicators This section describes the fan module indicators. Table 7-1 describes the fan module indicators. Table 7-1 Description of the fan module indicators Name Color Description...

  • Page 207: Sru Indicators

    Quidway S9300 Terabit Routing Switch Hardware Description 7 List of Indicators Table 7-3 Description of the AC power supply indicators Indicator Color Description Green If the indicator is on, it indicates that the AC power input is normal. If the indicator is off and the FAULT indicator...

  • Page 208: Mcua Indicators

    Quidway S9300 Terabit Routing Switch Hardware Description 7 List of Indicators Indicator/Button Color Meaning Green This indicator shows whether the SRU is the master SRU or slave SRU. If the indicator is on, it indicates that the SRU is the master SRU.

  • Page 209: Lpu Indicators

    Quidway S9300 Terabit Routing Switch Hardware Description 7 List of Indicators Indicator/Button Color Description Green Indicates the active MCU or the standby MCU. If the indicator is on, it indicates that the MCU is the active one. If the indicator is off, it indicates that the MCU is the standby one.

  • Page 210: Cmu Indicators

    Quidway S9300 Terabit Routing Switch Hardware Description 7 List of Indicators Interface Indicators of the Optical LPU Each interface provides two indicators. The left is the ACT indicator, and the right is the Link indicator. Table 7-7 describes the meanings of the indicators.
  • Page 211 Quidway S9300 Terabit Routing Switch Hardware Description 7 List of Indicators Table 7-9 Description of the CMU indicators Indicator/Button Color Description RUN/ALM Green If the indicator blinks every 2s (0.5 Hz), it indicates that the system is in normal state.

  • Page 212: List Of Boards

    This chapter describes the types and technical specifications of the boards. 8.1 Boards Supported by the S9300 This section describes the boards supported by the S9300. 8.2 Power Consumption and Weight This section describes the power consumption and weight of boards.

  • Page 213: Boards Supported By The S9300

    B series boards are BC boards, for example, 48-port 100M/1000M Ethernet optical LPU (BC, SFP)-128K MAC. A POS board consists of a WAN card and subcard such as P4CF, P4HF, or P1UF. The following tables list the boards supported by the S9300. Table 8-1 Main control boards and subcards Name...
  • Page 214 Quidway S9300 Terabit Routing Switch Hardware Description 8 List of Boards Table 8-3 service boards Name Description VAMPA Value-added service (VAS) board Table 8-4 Ethernet LPUs Name Description G24CA 24-port 100/1000BASE-X and 8-port 10/100/1000BASE-T interface card (SA, SFP/RJ45) G24SA 24-port 100/1000BASE-X interface card (SA, SFP)-32K MAC...
  • Page 215 Quidway S9300 Terabit Routing Switch Hardware Description 8 List of Boards Name Description S24XC 24-Port 100/1000BASE-X and 2-Port 10GBASE-X Interface Card (EC,SFP/XFP)-128K MAC T24XA 24-port 10/100/1000BASE-T and 2-port 10GBASE-X interface card (EA, RJ45/XFP)-32K MAC G24CEAS 24-port 100/1000BASE-X and 8-port 10/100/1000BASE-T Combo...

  • Page 216: Power Consumption And Weight

    This section describes the power consumption and weight of boards. Table 8-6 shows the power consumption and weight of the boards on the S9300. Suppose that the temperature in the equipment room is 25°C. Table 8-6 Power consumption and weight of boards...
  • Page 217 Quidway S9300 Terabit Routing Switch Hardware Description 8 List of Boards Board Maximum Power Weight Consumption F48SC 76 W 2.66 kg F48TA 59 W 2.50 kg F48TC 70 W 2.62 kg F48TFA 40 W 2.30 kg X40SFC 183 W 2.90 kg...

  • Page 218: List Of Interface Attributes

    9 List of Interface Attributes List of Interface Attributes About This Chapter This chapter describes the attributes of interfaces supported by the S9300. 9.1 Electrical Interface Attributes This section describes the attributes of electrical interfaces. 9.2 10GE Optical Interface Attributes This section describes the attributes of 10GE optical interfaces.

  • Page 219: Electrical Interface Attributes

    Quidway S9300 Terabit Routing Switch Hardware Description 9 List of Interface Attributes 9.1 Electrical Interface Attributes This section describes the attributes of electrical interfaces. Table 9-1 lists the attributes of electrical interfaces. Table 9-1 Attributes of the 10M/100M/1000M Base-T Ethernet interface...

  • Page 220: Ge Optical Interface Attributes

    Multi-mode Single-mode NOTE Only Huawei certificated optical modules can be used on the S9300. If the non-certificated optical modules are used, Huawei will not fix the problems caused by these optical modules. 9.3 GE Optical Interface Attributes This section describes the attributes of GE optical interfaces.
  • Page 221 Quidway S9300 Terabit Routing Switch Hardware Description 9 List of Interface Attributes Each interface of the GE optical LPU has an optical module. Table 9-5, Table 9-6, Table 9-7 Table 9-8 show the attributes of the interface and the optical module.
  • Page 222 Quidway S9300 Terabit Routing Switch Hardware Description 9 List of Interface Attributes Attri Description bute Over 0 dBm -3.0 -3.0 -3.0 -3.0 -3.0 -3.0 -9.0 load optic powe Extin 9 dB 9 dB 6 dB 6 dB 9 dB 8.5 dB...

  • Page 223: Fe Optical Interface Attributes

    Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network protocol NOTE Only Huawei certificated optical modules can be used on the S9300. If the non-certificated optical modules are used, Huawei will not fix the problems caused by these optical modules. 9.4 FE Optical Interface Attributes This section describes the attributes of FE optical interfaces.
  • Page 224 Single-mode type mode NOTE Only Huawei certificated optical modules can be used on the S9300. If the non-certificated optical modules are used, Huawei will not fix the problems caused by these optical modules. Issue 02 (2012-04-30) Huawei Proprietary and Confidential...

Table of Contents