Related Manuals for LG 65WT980H
Summary of Contents for LG 65WT980H
- Page 1 OLED TV 65WT980H (M3 X L8) X 5 (+4) X 5 (+2) X 5 (+2) (Ø 3 X L18) (Ø 5 X L65) www.lg.com...
- Page 11 Satellite IN...
- Page 12 HDMI IN/ARC...
- Page 16 1446 3.85 793.8 48.5 230.2 65WT980H0ZA AC 100-240 V ~ 50 / 60 Hz Power Requirement...
- Page 17 OWNER’S MANUAL Safety and Reference OLED TV Please read this manual carefully before operating your set and retain it for future reference. *SAC35974010* www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved. (1909-REV00)
- Page 18 Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
- Page 19 Unauthorized modification could void the user’s authority to operate this product. • Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
-
Page 20: Separate Purchase
Preparing Separate Purchase Separate purchase items can be changed or modified for quality • If the TV is turned on for the first time after it was shipped from the improvement without any notification. Contact your dealer to buy these factory, initialization of the TV may take a few minutes. -
Page 21: Lifting And Moving The Tv
Lifting and moving the TV • Avoid touching the screen at all times, as this may result in damage to the screen. • When supported cable is not long enough to connect TV set with Companion Box (AV box), you can use an extension Please note the following advice to prevent the TV from being scratched cable. -
Page 22: Tools You Will Need
• When installing on a gypsum board or medium-density fiberboard Provided item (MDF) wall, fasten the screws to the wooden pillars that support the wall. If there are no wooden pillars, check the distance from the inner wall before installing. - 30 mm or below: Install directly on the inner wall using a 65 mm screw. -
Page 23: How To Attach To Masonry Walls
How to attach to masonry walls • When mounting a TV on the wall, make sure not to install the TV with the power and signal cables hanging from the Please follow the below direction. back of the TV. 1 Use a drill bit Ø 8 mm to drill a hole for the anchor location within a • ... -
Page 24: Satellite Dish
Connections • If the cable that connects the panel to the Companion Box (AV box) is to be embedded in the wall, it is recommended to make use of a conduit as shown in the figure below. The conduit must be installed in accordance with the Connect various external devices to the TV and switch input modes to wall-embedded installment regulations of each country. -
Page 25: Other Connections
Other connections External Devices Available external devices are: Blu-ray player, HD receivers, DVD players, Connect your TV to external devices. For the best picture and audio VCRs, audio systems, USB storage devices, PC, gaming devices, and quality, connect the external device and the TV with an HDMI cable. other external devices. -
Page 26: External Speakers
External Speakers Method of volume control port • Cable Spec. Each Up / Down pin is pulled to 3.3 V with CPU GPIO. / UP / DOWN VOLUME CPU detects transition STEREO CONTROL from 3.3 V to level for volume control. (8 ) Control port for Speaker out DOWN RIGHT... -
Page 27: Wired Network Connection
Network Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to port on the TV. -
Page 28: Using Remote Control
Using Remote Control * To use the button, press and hold for more than 3 seconds. (POWER) Turns the TV on or off. (INPUT) Changes the input source. The descriptions in this manual are based on the buttons on the remote Number buttons Enters numbers. -
Page 29: Registering Magic Remote Control
Troubleshooting Registering Magic Remote Control How to register the Magic Remote Control The software version can be updated for improvement in performance. To use the Magic Remote, first pair it with your TV. Customer needs to ensure the compatibility of customer’s equipment 1 Put batteries into the Magic Remote and turn the TV on. -
Page 30: Abnormal Display
Abnormal display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. • This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. -
Page 31: Specifications
Specifications (Depending on country) Broadcasting Specifications Digital TV Analogue TV DVB-T DVB-T2 PAL/SECAM B/G, D/K, I Television system DVB-C SECAM L DVB-S/S2 DVB-S/S2 DVB-C DVB-T/T2 VHF III: 174 ~ 230 MHz Channel coverage UHF IV: 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950 ~ 2,150 MHz 46 ~ 890 MHz... -
Page 32: Operating Temperature
Wireless module (LGSBWAC72) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 14 dBm 5,150 to 5,725 MHz 16.5 dBm 5,725 to 5,850 MHz (Not for EU) 11.5 dBm Bluetooth Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 8.5 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. - Page 33 HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode. (Depending on model) Frequency (kHz) Frequency (Hz) 31.46 59.94 Horizontal Vertical 640 x 480p Resolution 31.5 Frequency (kHz) Frequency (Hz) 31.47 59.94...
-
Page 34: Supported Photo Formats
Supported Photo Formats Supported Audio Formats File File Format Resolution Item Info Format Format Minimum: 64 (W) x 64 (H) Bit rate 32 Kbps - 320 Kbps Maximum (Normal Type): 15360 (W) x Sample freq. 16 kHz - 48 kHz .jpeg, .jpg, .mp3 JPEG 8640 (H) Support MPEG1, MPEG2 .jpe Maximum (Progressive Type): 1920 (W) Channels... -
Page 35: Supported Video Formats
• ULTRA HD Video: 3840 x 2160, 4096 x 2160 • Some HEVC encoded ULTRA HD videos other than the content Extension Codec officially provided by LG Electronics may not be played. VC-1 Advanced Profile (except for • Some codecs can be supported after a software upgrade. Video .asf... -
Page 36: Open Source Software Notice Information
The terms HDMI and HDMI High-Definition Multimedia Interface, LG Electronics will also provide open source code to you on CD-ROM and the HDMI Logo are trademarks or registered trademarks of for a charge covering the cost of performing such distribution (such HDMI Licensing Administrator, Inc. - Page 37 - [Picture] [Picture Mode Settings] [OLED LIGHT] Adjust static image on the screen for a long time. LG OLED TVs incorporate to lower value dedicated functions that protect the screen from possible image - [Picture] [OLED Panel Settings] [Logo Luminance retention.
- Page 38 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No.
- Page 39 OWNER’S MANUAL RS-232C OLED TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
- Page 40 IR CODES • This feature is not available for all models. Code (Hexa) Function Note Remote control Button (POWER) (Power On/Off) (INPUT) Remote control Button Number Key 1-9 11-19 Remote control Button Remote control Button (Screen Remote) Remote control Button (Voice recognition) Number Key 0 Remote control Button...
- Page 41 Code (Hexa) Function Note Remote control Button (RED) Remote control Button (GREEN) Remote control Button (YELLOW) Remote control Button (BLUE) Remote control Button Remote control Button Remote control Button Remote control Button...
-
Page 42: External Control Device Setup
EXTERNAL CONTROL DEVICE SETUP Phone jack Type (Depending on model) • You need to purchase the phone-jack to RS-232C cable required for RS-232C Setup the connection between the PC and the TV, which is specified in the manual. • Image shown may differ from your TV. * For other models, connect to the USB port. -
Page 43: Communication Parameters
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations Data (Standard RS-232C cable) Command1 Command2 (Hexadecimal) 1 Power 00 to 01 2 [Aspect Ratio] (See p. 6) 3 Screen Mute (See p. 7) 4 Volume Mute 00 to 01 5 Volume 00 to 64 Control... -
Page 44: Transmission / Receiving Protocol
Transmission / Receiving Protocol 1 Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission Transmission (k)(a)( )([Set ID])( )([Data])(Cr) (Command1)(Command2)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Off] (Command1) : First command to control the TV. (j, k, m or x) [Data] 01 : [On] (Command2) : Second command to control the TV. - Page 45 3 Screen Mute (Command: k d) 6 [Contrast] (Command: k g) ►To select screen mute on/off. ►To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission (k)(d)( )([Set ID])( )([Data])(Cr) (k)(g)( )([Set ID])( )([Data])(Cr) [Data] 00 : Screen mute off (Picture on) / Video mute off Data Min : 00 to Max : 64 [Data] 01 : Screen mute on (Picture off) * Refer to "Real data mapping".
- Page 46 9 [Tint] (Command: k j) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen tint. ►To lock the front panel controls on the monitor and remote control. You can also adjust tint in the picture settings. Transmission Transmission (k)(m)( )([Set ID])( )([Data])(Cr) (k)(j)( )([Set ID])( )([Data])(Cr)
- Page 47 15 [Energy Saving] (Command: j q) 17 [Equalizer] (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalizer. Energy Saving in picture settings. Transmission Transmission (j)(v)( )([Set ID])( )([Data])(Cr) (j)(q)( )([Set ID])( )([Data])(Cr) Power Saving Level Function...
- Page 48 18 Tune Command (Command: m a) 19 Programme [Skip] / [Add] (Command: m b) ►Select channel to following physical number. ►To set skip status for the current Programme. Transmission Transmission (m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr) (m)(b)( )([Set ID])( )([Data])(Cr) [Data] 00 : High channel data [Data] 00 : [Skip] [Data] 01 : Low channel data...
-
Page 49: External Input
22 [Input] select (Command: x b) (Main Picture Input) * Real data mapping ►To select input source for main picture. 00 : Step 0 Transmission (x)(b)( )([Set ID])( )([Data])(Cr) Step 10 ([Set ID] 10) [Data] Structure Step 15 ([Set ID] 15) 10 : Step 16 ([Set ID] 16) 64 :... - Page 50 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial no.