Contents Safety information ..............................iii General Safety guidelines ....................................iii TCO Certified........................................iv Chapter 1. Getting started...........................1-1 Shipping contents......................................1-1 Notice for use.........................................1-2 Product overview ......................................1-2 Adjusting the tilt ......................................1-2 Monitor controls .......................................1-3 Cable lock slot......................................1-3 Setting up your monitor ....................................1-3 Connecting and turning on your monitor..............................1-3 Chapter 2.
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached.
Congratulations! This product is TCO Certified – for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
Chapter 1. Getting started This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. Shipping contents The product package should include the following items: • Information Flyer • Flat Panel Monitor •...
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. Place your monitor with the screen face down on a soft flat surface. Align the stand assembly bracket to the monitor.
Monitor controls The keypad controls on the panel frame are accesses to various functions. For information on how to utilize these keypad controls, please see “Adjusting your monitor image” on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Setting up your monitor This section provides information on how to set up your monitor.
Page 9
3. Connect one end of the HDMI cable to the monitor HDMI connector and the other end to the computer. HDMI Note: Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the "Lenovo HDMI to HDMI Cable OB47070" www.lenovo.com/support/ monitoraccessories.
Page 10
4. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from HDMI. Note: Please be aware that excessive and/or extreme volume might damage your hearing ability. 5. Insert the Adapter into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets.
Page 11
6. Power on the monitor and the computer. 7. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website http://support.lenovo.com/docs/q24i_10. Refer to the “Manually installing the monitor driver” on page 3-5 section to install the driver.
In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
• Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. • General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On-Screen Display (OSD) is not displayed. Icon Name Description Switches the video input source. Input Source Shift back to previous level when in OSD mode.
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Q24i-10 1920x1080 Brightness Contrast DisplayMode Scaling OverDrive InputSignal: VGA To use the controls: Press to open the main OSD menu. 2. Use to move among the icons.
Page 16
Table 2-1. OSD functions OSD Icon on Main Controls and Submenu Description Menu Adjustments Brightness Adjusts overall brightness Contrast Adjusts difference between light and dark areas Enable dynamic contrast ratio. • Standard • Game DisplayMode • Web • Movie All input ports •...
Page 17
Table 2-2. OSD functions OSD Icon on Main Controls and Submenu Description Menu Adjustments VGA input source VGA input port Input Source HDMI HDM Iinput source HDMI input port Shows Model name,Refresh,Firmware,Serial Number . Information Note: This screen offers information only, and (does) not allow for setting changes.
Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. •...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power indicator is The video signal cable Be sure the video cable “Connecting and turning amber, but there is no is loose or disconnected is connected with the on your monitor” on image.
(where X indicates "the folder in which the downloaded driver is located" (such as a desktop)). 14. Select the "Q24i-10.inf" file and click the Open button. Click the OK button. 15. In the new window, select Q24i-10 and click Next.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 1680 x 1050 at a refresh rate of 60 Hz.
Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: •...
Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that isthe property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacturer. Do not use the ac power cord for other devices. Appendix B. B-3...