Pci Card & Interfaces; The E-Mu 1010 Pci Card; Important; Connections - E-Mu 1212M Owner's Manual
Digital audio system
Hide thumbs
Also See for 1212M:
- Owner's manual (144 pages) ,
- Quick start manual (108 pages) ,
- Manual (64 pages)
Table of Contents
Advertisement
3 - PCI Card & Interfaces
The E-MU 1010 PCI Card
The E-MU 1010 PCI card is the heart of the system and contains E-MU's powerful
E-DSP chip. The powerful hardware DSP on this card leaves more power free on your
CPU for additional software plug-ins and other tasks.
When the MicroDock is connected to the 1010 PCI card, the digital I/O on the PCI
card is disabled. Use the digital I/O on the MicroDock.
Connections
(',
Connects to
MicroDock
via EDI Cable
S/PDIF
In/Out
ADAT
or S/PDIF
Optical
In/Out
ADAT Optical Digital Input & Output
The ADAT optical connectors transmit and receive 8 channels of 24-bit audio using the
ADAT type 1 & 2 formats. The word clock contained in the input data stream can be
used as a word clock source.
advantages such as immunity to electrical interference and ground loops. Make sure to
use high quality glass fiber light pipes for connections longer than 1.5 meters.
E-MU PCI Digital Audio Systems
Important
EDI Connector
Connects to the MicroDock using the supplied EDI
cable. This cable provides a a two-way data link
between the E-MU 1010 and the MicroDock as well
as supplying power to the MicroDock.
S/PDIF Digital Audio Input & Output
RCA phono jacks are standard connectors used for
S/PDIF (Sony/Philips Digital InterFace) connections.
Each jack carries two channels of digital audio.
The E-MU 1010 receives digital audio data with word
lengths of up to 24-bits. Data is always transmitted at
24-bits.
S/PDIF digital I/O can be used for the reception and/
or transmission of digital data from external digital
devices such as a DAT external analog-to-digital
converter or an external signal processor equipped
with digital inputs and outputs.
The S/PDIF out can be configured in either Profes-
sional or Consumer mode in the Session Settings
menu. The 1010 PCI card can also send and receive
AES/EBU digital audio through the use of a cable
adapter.
See "AES/EBU to S/PDIF Cable Adapter"
details.
The S/PDIF input and outputs are usable at the
44.1kHz, 48kHz 88.2kHz and 96kHz sample rates,
but are disabled for 176.4kHz and 192kHz. The
word clock contained in the input data stream can be
used as a word clock source.
See "System
Settings". Optical connections have certain
for
See "System
Settings".
3 - PCI Card & Interfaces
The E-MU 1010 PCI Card
Important: When
using any type of digital
I/O such as S/PDIF or
ADAT, you MUST sample
sync the two devices or
clicks and pops in the
audio will result.
17
Hide quick links:
Advertisement
Table of Contents
