Page 1 User’s Guide If you need assistance: InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see guide. TOSHIBA 5205 Series ® ® Center Chapter 9 on page 260 in this...
Page 2 If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
Page 3: Fcc Notice
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and...
Page 4: Type Of Service
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: If Problems Arise
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
Page 6: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B), as...
Page 7: Wireless Lan And Your Health
If you should experience any such problem, immediately turn off either one of your Bluetooth™ or Wireless LAN. Please contact Toshiba PC product support on web site http://www.toshiba- europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for more information.
Page 8: Regulatory Information
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 België/ For outdoor usage only channel 10 (2457 MHz) and 11 (2462 MHz) is Belgique: allowed. For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 10 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 11 Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information. Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 12: Device Authorization
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 13: Interference Statement
Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 14 Approved Countries/Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 15: Wireless Lan Card
Mexico Norway Singapore Switzerland Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 16: Bluetooth Wireless Technology Interoperability
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 17: Bluetooth Wireless Technology And Your Health
WirelessLAN. Please contact Toshiba PC product support on web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http:// www.pcsupport.global.toshiba.com in the United States for more information. Bluetooth wireless technology and your Health The products with Bluetooth wireless technology, like other radio devices, emit radio frequency electromagnetic energy.
Page 18 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 19 Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’ s authority to operate the equipment. Taiwan Article 14 Unless approved, for any model accredited low power radio frequency...
Page 20 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 21 Approval Number : 01NYDA1305 The following restrictions apply: Do not disassemble or modify the device. Do not install the embedded wireless module into other device. CD-ROM, DVD-ROM, and Multifunction drive safety instructions The CD-ROM, DVD-ROM and Multifunction drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.
Page 22 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 23 Microsoft, Windows, DirectX, PowerPoint and DirectShow are registered trademarks, and Windows Media is a trademark of Microsoft Corporation. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. i.LINK is a registered trademark of the Sony Corporation.
Page 24: Table Of Contents
Contents Introduction ...34 This guide ... 34 Safety icons ... 35 Other icons used... 36 Other documentation ... 36 Service options ... 37 Chapter 1: Finding Your Way Around ... 38 Making sure you have everything ... 38 Front with the display closed ... 39 Back ...
Page 25 Keeping yourself comfortable ... 53 Precautions... 56 Setting up your computer ... 57 Setting up your software... 58 Registering your computer with Toshiba ... 59 Installing additional memory (optional) ... 60 Connecting a mouse ... 64 Connecting a printer ... 64 Connecting a USB printer...
Page 26 Ctrl, Fn, and Alt keys ... 84 Function keys... 84 Windows Overlay keys... 85 Emulating a full-size keyboard ... 87 TOSHIBA Console button ... 87 Starting a program... 88 Saving your work ... 88 Printing your work ... 89 Using diskettes ... 90 Inserting and removing diskettes...
Page 27 Going into Stand by mode more quickly ... 119 Starting again from Stand by ... 121 Chapter 4: Mobile Computing ... 122 Toshiba’s energy-saver design ... 122 Running the computer on battery power ... 122 Using additional batteries ... 123 Battery safety precautions...
Page 28 Contents Disposing of used batteries safely ... 133 Traveling tips... 134 Chapter 5: Getting to Know the Windows System... 135 Lesson 1: Exploring the desktop ... 135 Finding your way around the desktop ... 136 Windows Lesson 2: Using the pointing device and control buttons together ...
Page 29 Chapter 6: Getting to Know the Windows Center... 165 Media Center Setup... 166 Connecting the Computer to a Television... 166 Connecting the Remote Sensor ... 166 Starting the Media Center ... 169 The Remote Control ... 173 Watching Television Programs... 179 Watching Live TV Using Time Shifting ...
Page 30 Contents Watching Your Digital Movies ... 200 Organizing Your Videos... 201 Playing Digital Videos ... 202 Playing a Video in Full Screen Mode ... 202 Sorting Videos ... 203 Watching a DVD... 203 Stopping a DVD Movie... 204 Playing a DVD movie already in your drive ... 205 Changing the Media Center Settings ...
Page 31 Inserting an SD card ... 238 Removing an SD card ... 238 Using the Toshiba Style bay ... 239 Inserting a device into the Toshiba Style bay . 239 Removing a device form the Chapter 8: Toshiba Utilities ... 241 TOSHIBA Accessibility ...
Page 32 Hotkey utility ... 247 TOSHIBA Console ... 248 Customize your computer... 249 Network ... 249 Security... 249 TOSHIBA Button Controls ... 251 Power Management ... 255 Toshiba Hardware Setup ... 258 ... 259 Chapter 9: If Something Goes Wrong ... 260 Problems that are easy to fix ...
Page 33 Develop good computing habits ... 282 If you need further assistance... 283 Before you call ... 283 Contacting Toshiba ... 284 Other Toshiba Internet Web sites ... 285 Toshiba’s worldwide offices ... 285 Appendix A: Hot Keys ... 288 Volume Mute... 288 Instant password security...
Page 34: Introduction
Your system comes with the Microsoft Center (MCE) operating system. This guide contains information on the operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with the computer.
Page 35: Safety Icons
yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Page 36: Other Icons Used
C: drive. Guides for other programs that may come preinstalled on your computer and for additional programs on your Recovery CDs. For accessory information, visit Toshiba's web site at toshiba.com. The Microsoft explains the features of the operating system. ®...
Page 37: Service Options
Service options Toshiba offers a full line of service options built around its ® SelectServ warranty programs. For more information, visit Toshiba’s Web site a toshiba.com If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 38: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 39: Front With The Display Closed
Front with the display closed The infrared port allows cable-free communication with another device, such as a computer or printer, that has a compatible infrared port. The display latch keeps the display panel closed and locked. To open the display panel, slide the display latch to the right and raise the panel.
Page 40: Right Side
The PC Card eject button releases the PC Card from the slot. The 3.5 mm headphone/S/PDIF Digital Optical out lets you connect stereo headphones or other audio-output devices, Toshiba Style bay with TV tuner installed Video /audio line out jack (yellow) Line in jack (blue)
Page 41 The 3.5 mm video/audio line out jack allows you to play DVD audio and video on a projector or TV that accepts audio/video inputs. The Toshiba Style bay allows you to insert an additional optical drive (DVD-ROM, CD-RW, etc.), battery pack, or hard disk drive module.
Page 42: Left Side
The security lock slot allows you to attach an optional PORT- Noteworthy for securing it to a large, heavy object such as your desk. Left side Bass air vent (monitor) port USB ports *only functional for systems with Wi-Fi™ The DVD-ROM or DVD-ROM/CD-RW drive enables you to play high-resolution, full-screen videos at up to 30 frames per second.
Page 43 The eject button opens the drive tray when the computer is turned on. The Bass air vent provides air to cool the bass speaker. The RGB (monitor) port allows you to connect an external monitor. The USB (Universal Serial Bus) ports allow you to connect USB peripherals to your computer.
Page 44: Front With The Display Open
For more information, see “Hot Keys” on page CD/DVD control buttons “Front with the display closed” on 288. Screen Internet button Keyboard indicator panel TV out button Speaker TOSHIBA Console button Keyboard Palm rest Secondary control button System indicator panel key, activate...
Page 45 251. The lights on the keyboard indicator panel provide information about various keyboard functions. For details, “Keyboard indicator panel” on page The TOSHIBA Console button allows quick access to various functions. For more information, see “TOSHIBA Console button” on page The TV out button activates an external display device such as a TV when connected to the video/audio line out jack.
Page 46: Keyboard Indicator Panel
The 85-key keyboard provides all the functionality of a full- size keyboard. For more information, see keyboard” on page The front panel provides a palm rest to assist you in maintaining proper posture while using the computer. Keyboard indicator panel The cursor control mode light glows when the cursor control overlay is on.
Page 47: System Indicator Panel
The Toshiba Style bay light glows green when the computer is accessing a DVD-ROM drive, CD-RW/DVD-ROM drive, or Toshiba Style HDD adaptor in the Toshiba Style bay. When the secondary battery is in the Toshiba Style bay, the Toshiba Style bay indicator will: Glow green when fully charged...
Page 48: Cd/Dvd Control Buttons
Glow amber while charging Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data. CD/DVD control buttons The control buttons near the display latch are for playing CDs and DVDs.
Page 49 The next track button causes the disc player to skip to the following track on the disc. If you have set a password for logging onto your system, your computer will start up and you will need to log on before being able to play a CD or DVD.
Page 50: Underside
Underside Battery Battery release latch Mini-PCI cover* Toshiba Style bay release latch Modem cover *Wi-Fi Mini PCI module is optional The Wi-Fi Mini-PCI cover secures a Wi-Fi Mini-PCI card for wireless networking (*for systems with Wi-Fi). The Wi-Fi Mini PCI module is optional.
Page 51 The expansion memory slot cover protects the slots where you insert additional memory. See “Installing additional memory (optional)” on page 60 for detailed information. The Toshiba Style bay release latch secures the optional drive or device that is installed in the Toshiba Style bay.
Page 52: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 53: Keeping Yourself Comfortable
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba authorized service provider. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 54 Getting Started Selecting a place to work If you are using an external monitor, the top of the display should be no higher than eye level. If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly.
Page 55 Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work.
Page 56: Precautions
Getting Started Selecting a place to work Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency.
Page 57: Setting Up Your Computer
Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used. Overheating of a PC Card can result in errors or instability in its operation. Be careful when you remove a PC Card that has been used for a long period.
Page 58: Setting Up Your Software
A window will display asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. Enter you personal information in the registration window.
Page 59: Registering Your Computer With Toshiba
Toshiba warranty worldwide at no charge to you. You can register your computer with Toshiba by double- clicking the icon on your desktop or by mailing the registration card that may ship with your computer.
Page 60: Installing Additional Memory (Optional)
Getting Started Setting up your computer Installing additional memory (optional) Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost.
Page 61 Remove the battery. Close the display panel and turn the computer upside down to locate the expansion memory slot cover to the memory slot. Base of the computer Using a standard Phillips no. 1 screwdriver, unscrew the two screws that secure the memory slot cover, then remove the memory slot cover.
Page 62 Getting Started Setting up your computer Put the screws and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 63: Removing A Memory Module
Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. Replace the memory slot cover. Replace the screws and tighten them. Turn the computer over and reconnect any cables you removed.
Page 64: Connecting A Mouse
Getting Started Connecting a mouse The General tab view automatically appears and shows total memory. If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and make sure the memory module is seated properly, as described in Connecting a mouse You may want to use a mouse instead of the TouchPad, the...
Page 65: Using External Display Devices
See your printer documentation for additional configuration steps, or see Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen. Also you can attach a television set or other external video device to your computer for viewing DVD movies or presentations.
Page 66: Adjusting The Quality Of The External Display
Getting Started Using external display devices While holding down setting you want takes effect. This hot key cycles through the settings in the following order: Built-in display panel only Built-in display panel and external monitor simultaneously External monitor only Built-in display panel and external video device simultaneously External video device only Release the...
Page 67: Connecting An Optional External Diskette Drive
Connecting an optional external diskette drive Connecting an optional external diskette drive An optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. For more information about diskettes, see on page Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to...
Page 68: Connecting The Ac Adapter
Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 69: Charging The Battery
Connecting the AC adapter to the computer Connect the power cable to a live electrical outlet. The AC power and battery lights glow. Damaged power cables can cause fire or electric shock. Never DANGER modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable.
Page 70: Using The Computer For The First Time
Getting Started Using the computer for the first time is on. The less power the computer is consuming, the faster the battery will charge. For more information on battery use, see computer on battery power” on page Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time.
Page 71: Turning On The Power
Turning on the power Check that all the drives are empty. If you have a printer connected to your computer, turn on the printer and wait until the printer indicates that it is ready (on line). Turn on the computer by pressing the power button located above the keyboard.
Page 72: Activating The Power-On Password
To activate the power-on password: Press the TOSHIBA Console button. The TOSHIBA Console window appears. For more information see Click Security. Click User password.
Page 73: Using Your Pointing Device
If you forget your power-on password and therefore can not turn on your computer, take your computer to a Toshiba authorized service center for help. After the third incorrect password submission, the system automatically shuts down.
Page 74: Using The Touchpad
Getting Started Using the computer for the first time Sample Mouse Properties window Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad.
Page 75 Using the computer for the first time To move the cursor to the bottom of the page, slide your finger toward yourself. To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right. To move the cursor to the left side, slide your finger from right to left.
Page 76: Setting Up A Printer
Getting Started Using the computer for the first time Setting up a printer If you started your computer with a printer connected and turned on, it may have been detected automatically. If this is not the case, then you must install the printer driver for the model of printer that is connected to your computer.
Page 77 Using the computer for the first time Sample Printers and Faxes window Click Add a Printer. The Add Printer Wizard window appears. Sample Add Printer Wizard Getting Started...
Page 78: Setting Up The Fax Function
Right-click the fax icon. Click Properties from the drop-down menu. Click the DEVICES tab. Under the device name, right-click Toshiba Soft Modem AMR, highlight Receive and click the Disable option. To enable the auto-receive function, repeat steps 1-4. But under the device name, right-click Toshiba Soft Modem AMR, highlight Receive and click the Enable device to receive and Auto options.
Page 79: Powering Off The Computer
Powering off the computer It’s a good idea to power off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 80: Moving The Computer
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer or through Toshiba’s Web site at toshibaaccessories.com. Using a computer lock You may want to secure your computer to a heavy object such as your desk.
Page 81 To secure the computer: Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot located on the right side of the computer, then rotate the key a quarter turn and remove it.
Page 82: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 83: Using The Keyboard
If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy. Use Disk Defragmenter to conserve disk space and help your computer perform at its optimal level. Before turning off the computer, always use the Turn Off command (unless you want to use Stand by or Hibernation mode as described in computer”...
Page 84: Character Keys
Learning the Basics Using the keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The spacebar creates a space character instead of just passing over an area of the page. The lowercase l (el) and the number 1 are not interchangeable.
Page 85: Windows ® Special Keys
® Windows special keys ® Windows special keys The keyboard provides two keys that have special functions in the operating system: The Windows The Application key has the same function as the secondary (or right mouse) control button. Overlay keys Sample keyboard overlay keys The keys with numbers and symbols on the front of them form the numeric and cursor overlay.
Page 86 Learning the Basics Using the keyboard Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode keyboard indicator light glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 87: Emulating A Full-Size Keyboard
For further information and instructions, see “Assigning a key to a program or document” on page TOSHIBA Console button The TOSHIBA Console button provides quick access to some common functions. When the default setting is active, the TOSHIBA Console button brings up the TOSHIBA Console.
Page 88: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options: Double-click the icon for the program on your desktop Use the Start menu...
Page 89: Printing Your Work
To save: A file you are updating, open the program’s File menu and click Save. A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 90: Using Diskettes
Learning the Basics Using diskettes Sample Print dialog box Click OK to print. Using diskettes The optional 3.5-inch external USB diskette drive lets you use high-density (1.44 MB) diskettes for data transfer and storage. Diskette activity light Sample optional external diskette drive The diskette activity light flashes while the drive is being accessed.
Page 91: Inserting And Removing Diskettes
Inserting and removing diskettes Hold the diskette so that the arrow on its upper surface points toward the drive. Push the diskette gently into the drive slot. When the diskette is in place, the eject button pops out. To release a diskette from the external drive slot, push the eject button.
Page 92: Backing Up Your Files
Learning the Basics Backing up your files Never eat, smoke, or use erasers near your diskettes. Foreign particles can damage the diskette’s surface. Keep your diskettes away from sources of magnetism, such as speakers and radios, since these can destroy data. Backing up your files Backing up your files means copying individual files to a diskette or copying entire sections of your hard disk to...
Page 93: Using The Dvd-Rom Or Multifunction Drive
Using the DVD-ROM or Multifunction drive Using the DVD-ROM or Multifunction drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 94: Drive Components And Control Buttons
Learning the Basics Using the DVD-ROM or Multifunction drive A special feature allows you to play audio CDs even when the computer is turned off. For more information, see control buttons” on page If your computer has a DVD-ROM/CD-RW multifunction drive, you can also write files (including music) to a CD- Recordable (CD-R) or CD-ReWritable (CD-RW) disc.
Page 95: Cd/Dvd Control Buttons
Using the DVD-ROM or Multifunction drive The manual eject button allows you to manually open the disc tray when power to the computer and the drive is off. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip.
Page 96 Learning the Basics Using the DVD-ROM or Multifunction drive CD/DVD and digital audio modes. To unlock the mode button, press and hold it for four seconds. You can only lock the mode to its current setting when the computer is in Standby or Hibernation mode, or when the power is off.
Page 97: Cd/Dvd Control And Digital Audio Control
Do not install or remove a memory module while the DVD- ROM drive power is on. Learning the Basics Digital Audio Mode The operating system starts, the TOSHIBA MEDIA PLAYER starts and the digital audio file begins to play. TOSHIBA MEDIA...
Page 98: Inserting A Disc
Learning the Basics Using the DVD-ROM or Multifunction drive Inserting a disc Before playing an audio CD or a DVD, turn the volume down. Playing the disc at maximum volume could damage your ears. To turn the volume down, use the volume control dial or access the Volume Control program (click Programs, Accessories, Entertainment, Volume Control...
Page 99 Using the DVD-ROM or Multifunction drive Carefully place the disc in the empty tray with its label facing up. Inserting a disc Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction.
Page 100: Playing An Audio Cd
Depending on your default setting, your CD player will be either the Windows Media MEDIA PLAYER. For information on how to set the default, please see “TOSHIBA Button Controls” on page To access the Windows Media click Windows Media Player. Rewind...
Page 101: Viewing The Contents Of A Cd Or Dvd
Using the DVD-ROM or Multifunction drive To access TOSHIBA MEDIA PLAYER: Click Start, then click All Programs. Select Accessories and then TOSHIBA MEDIA PLAYER. Next track Previous track Rewind CD mode Sample TOSHIBA MEDIA PLAYER window Select the CD mode button to enable the CD controls.
Page 102: Removing A Disc With The Computer On
Learning the Basics Using the DVD-ROM or Multifunction drive require a lot of space, such as photographs and large presentation files. You can use Explorer or My Computer to view the contents of any CD or DVD. Removing a disc with the computer on Never press the eject button while the computer is accessing the drive.
Page 103: Removing A Disc With The Computer Off
Using the DVD-ROM or Multifunction drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 104: Setting Up For Communications
For more information regarding your system’s V.92 modem, visit the Toshiba web site at Attach one end of a standard RJ11 telephone cable to the modem port on the back of the computer.
Page 105: Connecting Your Computer To A Network
Plug the other end of the RJ11 telephone cable into the modular jack of a standard voice-grade telephone line. Connecting your computer to a network You can connect your computer to a network locally or remotely. Locally, using the built-in 10/100 Ethernet LAN adapter by connecting it to a standard RJ45 LAN line.
Page 106: Turn Off Or Shut Down Command
Learning the Basics Powering down the computer Each option has its advantages. TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Page 107: Hibernation Command
Hibernation command The Hibernation command powers off the computer, but it first saves the current state of the computer to the hard disk. Since Hibernation does not require power to maintain the saved information, the system settings are retained indefinitely. Restoring information from the hard disk takes longer than restoring it from memory.
Page 108: Using Turn Off Or Shut Down
Learning the Basics Using Turn Off or Shut down When starting up again, this choice uses less time and battery power than either Turn Off, Shut down or Hibernation. On restarting, the computer returns to the state in which you left it, and opens all the programs and files you were using.
Page 109: Turning Off Or Shutting Down More Quickly
Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Learning the Basics Using Turn Off or Shut down ® XP Pro operating system and...
Page 110 Learning the Basics Using Turn Off or Shut down Sample TOSHIBA Power Saver Properties window Click Details in the Running on batteries section. The Full Power Properties window appears. Click the System Power Mode tab.
Page 111 Sample Full Power Properties window Select Power Off for the option you want. When I press the power button Set this option to Power Off if you want the computer to turn off when you press the power button. Click Override all Modes with settings here. The Set the range window appears.
Page 112: Starting Again After Turn Off Or Shut Down
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Full Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, press and release the power button;...
Page 113: Going Into Hibernation Mode
Sample TOSHIBA Power Saver Properties window Click the Hibernate tab, then click the Enable hibernate support check box. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Going into Hibernation mode If you are using the Windows...
Page 114: Going Into Hibernation Mode More Quickly
Learning the Basics Using Hibernation The Turn off computer window appears. Sample Turn off computer window with shift key held down to show Hibernate option The computer saves the state of the system, including all open programs and files, to the hard disk. Then the computer turns itself off.
Page 115 The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window In the Running on batteries area, click the Details button. Click the System Power Mode tab.
Page 116 Learning the Basics Using Hibernation Sample Full Power Properties window Select Hibernation for the options you want. When I press the power button Set this option to Hibernation so that the computer will go into Hibernation mode when you press the power button.
Page 117: Starting Again From Hibernation
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Full Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Hibernation...
Page 118 Learning the Basics Using Stand by The Turn off computer window appears. Sample Turn off computer window Click Stand By. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode.
Page 119: Going Into Stand By Mode More Quickly
Click Start, Control Panel. The Control Panel window appears Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Click Details in the Running on batteries section. Learning the Basics...
Page 120 Learning the Basics Using Stand by The Full Power Properties window appears. Click the System Power Mode tab. Sample Full Power Properties window Select Standby for the options you want. When I press the power button Set this option to Standby so that the computer will go into Stand by mode when you press the power button.
Page 121: Starting Again From Stand By
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Full Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Stand by To start the computer from Stand by mode, press and release the power button until the on/off light changes to green.
Page 122: Chapter 4: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 123: Using Additional Batteries
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer or visit the Toshiba Web site at toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Page 124: Battery Safety Precautions
Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through toshiba.com. A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed to cause reverse polarity.
Page 125: Maximizing Battery Life
Maximizing battery life To maximize the life of your battery: At least once a month, disconnect the computer from a power source and operate it on battery power until the battery fully discharges. Before doing so, follow the steps below: Turn off the computer’s power.
Page 126: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at toshiba.com. Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live wall outlet.
Page 127: Charging The Rtc Battery
Leave the power connected, and the battery should begin charging after a few minutes. HINT: Once a battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity.
Page 128: Monitoring Battery Power
Click Start, Control Panel. The Control Panel opens. Click Performance and Maintenance. Click the Toshiba Power Saver icon. Choose the Power Save Modes tab, then under the Running on Batteries section, click Details. Click the Power Save Mode tab.
Page 129: Conserving Battery Power
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. You may also set individual power-saving options to suit your own needs.
Page 130: What To Do When The Battery Runs Low
Mobile Computing Monitoring battery power What to do when the battery runs low When the battery runs low you can Plug the computer into an external power source and recharge the battery. Put the computer in Hibernation mode and replace the battery with a charged spare.
Page 131: Changing The Main Battery
Click the Toshiba Power Saver icon. Choose the Power Save Modes tab, then under the Running on Batteries section, click Details. Click the Alarm tab and set the alarm, as desired. Changing the main battery When your battery power is running low, you have two options: connect the computer to an AC power source or install a charged battery.
Page 132: Inserting A Charged Battery
Mobile Computing Changing the main battery Carefully slide the battery release latch toward the right side of the computer. Removing the battery With the battery release latch pulled toward the right side of the computer, grasp the battery pack and gently pull it free.
Page 133: Disposing Of Used Batteries Safely
Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. Mobile Computing Disposing of used batteries safely...
Page 134: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, compact discs and diskettes.
Page 135: Chapter 5: Getting To Know The Windows
Chapter 5 Getting to Know the Windows Operating System This chapter introduces the Windows by guiding you through a few basic tasks. Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 136: Finding Your Way Around The Desktop
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. However, the differences are not significant and do not indicate any change in the functionality of your system.
Page 137 Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.
Page 138: Windows ® Xp File System
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop For more information on starting programs, see Starting programs” on page Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open.
Page 139: Lesson 2: Using The Pointing Device And Control Buttons Together
Getting to Know the Windows ® XP Operating System Lesson 2: Using the pointing device and control buttons together Your office may have more than one file cabinet, just as your computer may have more than one disk drive. Computers can be connected together to form a network, so that programs, documents and other data can be quickly and easily shared between computers.
Page 140 Getting to Know the Windows ® XP Operating System Lesson 2: Using the pointing device and control buttons together Click an empty area of the desktop to close the Start menu. With the cursor in an empty area of the desktop, click the secondary button to open the desktop shortcut menu.
Page 141 Getting to Know the Windows ® XP Operating System Lesson 2: Using the pointing device and control buttons together Now click the Close button in the upper-right corner of this window. The My Computer window is closed. Click an empty area of the taskbar at the bottom of the screen and, while holding down the primary button, use the pointing device to drag the cursor to the right edge of the desktop, then release the primary button.
Page 142: Lesson 3: Learning About The Internet
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet If you can not move the taskbar, it’s probably because it has been locked. To unlock it: Right-click the taskbar. A menu appears. If the Lock the taskbar option has a check mark, then the feature is in use.
Page 143: Lesson 4: Creating A New Document
Getting to Know the Windows ® XP Operating System Click Start, then My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click Address Bar. The operating system displays the address bar. It indicates that you are in “My Computer.” Sample My Computer window Lesson 4: Creating a new document This lesson teaches you how to create a text file without...
Page 144 Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document To give your document a meaningful name, type and press Doc.txt Double-click the My New Doc icon. The operating system opens the new document in Notepad—the text editor built into the operating system.
Page 145: Lesson 5: Creating A New Folder
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder DEFINITION: A folder is an area where you can store documents and other types of files. It is analogous to a file folder stored in a file cabinet. In this case, a disk drive in the computer is the file cabinet.
Page 146: Lesson 6: Starting Programs
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Close the window by clicking its Close button and continue with the next lesson to learn how to start programs. Lesson 6: Starting programs Usually, you will know which program you want to use for a particular task.
Page 147 Getting to Know the Windows ® XP Operating System To open the second program: Click Start, then click All Programs. Point to Accessories, then click Windows Explorer. The operating system opens Windows provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Page 148: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning them so that you can see more than one of them at a time.
Page 149: Using The Taskbar
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Using the taskbar If you have applications open on the desktop, you can rearrange them by pointing to the program’s button on the taskbar with the pointing device and clicking the secondary button.
Page 150: Resizing And Moving Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the Maximize button in the top-right corner of the Paint window. The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed.
Page 151: Lesson 8: Closing Programs
Getting to Know the Windows ® XP Operating System Repeat steps Windows desktop. Now that the windows are side by side, you can see how you could refer to one window while working in the other. Resizing and moving windows allows you to rearrange the desktop to suit your needs.
Page 152: Lesson 9: Creating Shortcuts
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Lesson 9: Creating shortcuts By adding shortcuts to your desktop, you can open programs or files with the click of a button. You will probably want to create shortcuts for the programs you use most frequently.
Page 153: Creating A Shortcut To The Character Map
Getting to Know the Windows ® XP Operating System Creating a shortcut to the Character Map Use this method when you do not know the name and location of the program file. Click Start, then click Search. Sample Search option on the Start menu The operating system displays the Search Results window.
Page 154 Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Search Results window HINT: Search also allows you to perform searches on the Internet. Click All files and folders. Type char name. The operating system displays a list of all the files with “char”...
Page 155: Lesson 10: Changing The Screen Saver
Getting to Know the Windows ® XP Operating System Clicking a shortcut icon opens the program or folder immediately. You can place as many shortcuts on your desktop as you find useful. HINT: The Character Map is a useful tool when you want to add a special character to a document.
Page 156 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver The operating system opens the Display Properties window. Sample Display Properties window Click the Screen Saver tab. Click the arrow beside the current option—probably “(None)” —to open the screen saver list box. Scroll through the screen saver options by clicking the scroll arrows in the list box.
Page 157: Lesson 11: Setting The Date And Time
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time You initially set the computer’s date and time properties when you turned the computer on for the first time and set up the operating system. To change the date and time settings: Click Start, Control Panel.
Page 158: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Click the Date and Time tab and set the correct month, year, day, and time. Click the Time Zone tab and drop-down list box, and set your time zone.
Page 159 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin window To completely remove an object, select it, and then click File, Delete. The Confirm File Delete window appears. Click Yes to permanently delete the file. The object is permanently deleted from the Recycle Bin.
Page 160: Lesson 13: Using System Restore
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Page 161: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? This teaches you how to use some of the Help features in the ® Windows ® Windows XP Help and Support The operating system has a Help facility.
Page 162 Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 163: Using The Windows Xp Tour
Getting to Know the Windows ® XP Operating System Not every Help topic contains a hot link to start the program it is talking about. However, when you do encounter one, it provides a convenient way to start the program to look at while you read about the program in the Help topic.
Page 164: Lesson 15: Turning Off Your Computer
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Lesson 15: Turning off your computer It is very important that you let the operating system turn off your computer. As it shuts down, the operating system performs a number of tasks that ensure that everything is in place the next time you turn on the computer.
Page 165: Chapter 6: Getting To Know The Windows
Chapter 6 Getting to Know the Windows Center This section introduces you to the Windows Media Center, a complete multimedia center where you can play your entire library of audio, video, and picture media on your computer, using either your computer’s keyboard, mouse, or the remote control.
Page 166: Media Center Setup
Getting to Know the Windows ® XP Media Center Media Center Setup Media Center Setup This section shows you how to set up your computer to use the Media Center. Connecting the Computer to a Television Your computer has TV-out capability, meaning you can connect it to a television and view the computer image on the television.
Page 167 Getting to Know the Windows ® XP Media Center If you have a cable TV set-top box, satellite, or other set-top box that controls your TV signal, connect the remote sensor control cable to the remote sensor and position the end of it over the remote receiver on your cable box.
Page 168 Getting to Know the Windows ® XP Media Center Media Center Setup Select the signal source for TV in the Media Center program settings (refer to Settings” on page Connecting the TV Signal Source When You Have an Existing Setup To connect the signal source from the wall to a VCR and TV using a coaxial cable: Remove the coaxial cable from the VCR input and connect it...
Page 169: Starting The Media Center
Getting to Know the Windows ® XP Media Center Connect the remote sensor to the back of the remote control receiver, and place the remote sensor IR port onto the Set-top box's IR receiver port. Existing setup Wall Cable Set-top box/ satellite In Set-top box/ satellite Out...
Page 170 Getting to Know the Windows ® XP Media Center Starting the Media Center To complete the setup procedure you need to: Be logged on as an administrator. For more information, refer to your Microsoft Help. Have an Internet connection to download your television ser- vice provider’s program guide.
Page 171 Getting to Know the Windows ® XP Media Center You can run Media Center side by side with other Windows software programs. It’s possible to browse through your pictures, watch videos, play music, and even record TV while using other Windows programs. Simply resize the Media Center windows as you would any other window.
Page 172 Getting to Know the Windows ® XP Media Center Starting the Media Center ❖ Change your Media Center Settings When enjoying the Media Center, use the icons on the Title Bar to return to the Media Center main screen, go back to the previous screen, or to display the Media Center’s online help.
Page 173: The Remote Control
Getting to Know the Windows ® XP Media Center Navigating Media Center In the Media Center windows, a selected item, such as a folder, file, or menu item is outlined with a green border. To select items, use the arrow buttons on the remote control, and then the OK button to enter your selection.
Page 174 Getting to Know the Windows ® XP Media Center Starting the Media Center Remote Control Buttons Overview Play Record Replay Start Back Live TV My Music My Video Volume DVD Menu Clear The Remote Control The remote control has the following buttons/functions: Standby —...
Page 175 Getting to Know the Windows ® XP Media Center Starting the Media Center FWD (Fast forward) — Moves media forward. Replay — Moves media backward (seven seconds for videos and live TV, one music track or one DVD chapter at a time). Pause —...
Page 176 Getting to Know the Windows ® XP Media Center Starting the Media Center Channel/Page up (+) and down (-) — Changes the TV channel or moves a page up and down, depending on the available options. DVD Menu — Opens the main menu on a DVD movie, if available.
Page 177 Getting to Know the Windows ® XP Media Center Direct Access Buttons The direct access buttons open the main Media Center windows. TV opens the My TV window where you can watch and record TV and access other My TV features. Recorded TV opens the Recorded TV window where all your recorded TV programs are stored.
Page 178 Getting to Know the Windows ® XP Media Center Starting the Media Center Moves a video forward. Moves a TV program (that has been paused or stopped) forward to the current moment in live TV, and then begins playing. Use REW to rewind selected video or picture media. Press REW again to increase the rewinding speed.
Page 179: Watching Television Programs
Getting to Know the Windows ® XP Media Center For videos and live TV and videos, Replay moves back 7 seconds. Using the Media Center Remote Control To begin using your remote control: Point the remote control at the remote sensor. The remote sensor should be located near your monitor or in a convenient place.
Page 180 Getting to Know the Windows ® XP Media Center Watching Television Programs Quickly check which TV shows you have scheduled to record. Search for TV shows by title, keyword, or category. Sample My TV screen To watch a television program: Press the TV button on the remote control.
Page 181: Watching Live Tv Using Time Shifting
Getting to Know the Windows ® XP Media Center Watching Live TV Using Time Shifting When you open the My TV window and begin watching live TV, Media Center begins recording the selected program in the background for up to 30 minutes. This allows you to use your remote control to stop, pause, rewind, and fast forward live TV programs within a 30- minute time range.
Page 182 Getting to Know the Windows ® XP Media Center Watching Television Programs You can manually update the TV Guide in the Media Center Settings window at any time, even if you have automatic updates set up. If the TV Guide has not been downloaded from the Internet because there is no Internet connection, the message ‘No data available’...
Page 183: Watching A Recorded Tv Program
Getting to Know the Windows ® XP Media Center currently playing, the inset window will maximize and the program will play. Watching a Recorded TV Program Recorded TV is the storage place for all your recorded programs. In the Recorded TV window, you can sort your shows by name, date, or category.
Page 184: Searching For A Tv Program
Getting to Know the Windows ® XP Media Center Watching Television Programs the remote control. Select the option to change, and then press OK again. Select Recording errors to see which shows weren’t recorded and determine why they weren’t recorded. The show may have been in conflict with another show and then cancelled by Media Center, or it may have been a duplicate episode in a series.
Page 185: Recording Tv
Getting to Know the Windows ® XP Media Center Recording TV Sample Searching for a TV program screen Recording TV The Media Center allows you to record TV programs so that you can watch them when it is convenient. You can record the show you are watching, or you can record another or future show or series from the Guide, the Search, or the Settings window in My TV.
Page 186: Recording Tv Tips
Getting to Know the Windows ® XP Media Center Recording TV If there is a recording conflict or error, the Record Conflict icon appears next to the show in the TV Guide. This means the show will not be recorded unless the conflict is resolved. Recording TV tips If you are watching live TV during a scheduled recording time, you can watch only the show being recorded.
Page 187: Recording From The Guide
Getting to Know the Windows ® XP Media Center Recording from the Guide To record a current or future show or series from the Guide: Press the Start button on the remote control, select My TV, and then select Guide. Use the arrow buttons on the remote control to find the show you want to record, select the show, and then press You can also press the numeric buttons on the remote...
Page 188: Recording Manually
Getting to Know the Windows ® XP Media Center Recording TV Use the arrow buttons to scroll through the search results to select the show you want to record, select the show, and then press OK. Select Record or Record Series in the window, and then press OK.
Page 189: Changing Your Settings
Getting to Know the Windows ® XP Media Center Select Record in the window, and then press OK on the remote control to set the recording and return to the Settings window. Press Back on the remote control to return to the Start menu.
Page 190: Changing Recording Priorities
Getting to Know the Windows ® XP Media Center Recording TV Recording a TV program, including manually recording The TV Guide The TV Signal Parental Control specifications DVD settings Audio settings To make a change, click on the desired setting. Changing recording priorities To enable the Media Center to resolve recording conflicts, you can specify how program recordings are handled.
Page 191: Listening To Music
Getting to Know the Windows ® XP Media Center Press Back on the remote control to return to the previous window. Listening to Music The My Music window in the Media Center works with Windows Media Player to find and play your music files and CDs.
Page 192: Creating Your Music Library Using Windows Media Player
Getting to Know the Windows ® XP Media Center Listening to Music Sample My Music screen Creating Your Music Library Using Windows Media Player Each time you add music files outside of Windows Media Player, you must use the Tools menu to add music files to your Windows Media Player Library for Media Center to find them.
Page 193: Adding Music From Your Hard Drive To Windows Media Player Library
Getting to Know the Windows ® XP Media Center Click the Media Library tab to see where your new audio files have been placed. You can rename files by selecting the file and typing a new name or genre over the old one. The way you label your music files determines the category in which they are placed.
Page 194: Playing Digital Music Files
Getting to Know the Windows ® XP Media Center Listening to Music Select Search to search all drives, or select Browse to search through a specific drive. Select the desired drive and then click OK. Windows Media Player searches the selected drives for all supported audio files and adds them to the Media Library.
Page 195: Finding Music Files In My Music
Getting to Know the Windows ® XP Media Center Press the Start button on the remote control. Insert a CD into the CD drive — the CD plays automatically in Media Center. If you have other media such as live TV already playing when you insert the CD, Media Center asks you if you want to play the CD.
Page 196: Playing A Song
Getting to Know the Windows ® XP Media Center Listening to Music Playing a Song You can play a song from anywhere in My Music. You can select it from the View Song list, or from the Album, Artist, and Genre lists. You can also play a single song from a playlist as follows: In the My Music window, select View Songs.
Page 197: Creating A Playlist
Getting to Know the Windows ® XP Media Center Use the arrow buttons to select an album, and then press OK on the remote control. You can also select: Shuffle to rearrange the music tracks on the album. Play to play the album selected. The Now Playing window opens, and the album starts playing.
Page 198: Displaying Your Pictures
Getting to Know the Windows ® XP Media Center Displaying Your Pictures Click New playlist in the toolbar, type in a name for your playlist, and then click OK. Your new playlist should appear under the My Playlists area of the Media Player window.
Page 199: Viewing A Slide Show
Getting to Know the Windows ® XP Media Center Sample My Pictures screen After you organize your pictures in the My Pictures folder in Windows Explorer, open Media Center to view your pictures: Press the Start button on the remote control to open the Media Center Start menu.
Page 200: Sorting Your Pictures
Getting to Know the Windows ® XP Media Center Watching Your Digital Movies Press the Start button on the remote control to open the Media Center Start menu. Select My Pictures. Use the arrow buttons on the remote control to select the folder of pictures you want to view as a slide show, and then press OK.
Page 201: Organizing Your Videos
Getting to Know the Windows ® XP Media Center Watching Your Digital Movies Sample My Videos screen Organizing Your Videos When you attach a digital video camera to your PC, Windows asks you how you want to capture your video. You can choose from various software programs to capture and then edit your video file.
Page 202: Playing Digital Videos
Getting to Know the Windows ® XP Media Center Watching Your Digital Movies under Other Places, and then double-click the Shared Video folder. You can add, delete, edit, rename, and organize your video files into folders you create in the Shared Video folder. Your videos can now be played in Media Center.
Page 203: Sorting Videos
Getting to Know the Windows ® XP Media Center Press Back on the remote control to exit full screen mode and return to the previous window. Sorting Videos To organize your videos by date or by name: On the Media Center Start menu, select My Videos or Shared Video.
Page 204: Stopping A Dvd Movie
Getting to Know the Windows ® XP Media Center Watching a DVD Sample Play DVD screen Stopping a DVD Movie Press the Stop button on the remote control to stop the movie. Use the arrow buttons on the remote control to select an item on the Stopped menu, and then press OK.
Page 205: Playing A Dvd Movie Already In Your Drive
Getting to Know the Windows ® XP Media Center Playing a DVD movie already in your drive If you already have a DVD movie in your drive, but you have been doing other things in Media Center or in other programs from your desktop, you can play the DVD by: Press the Start button on the remote control.
Page 206 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings Administrator Controlled Settings Some settings apply to all Media Center windows for all users and must be set up by the administrator. These settings are: Parental Control sets up rating permissions for TV viewing.
Page 207 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings In the General window, do one of the following: Select About Media Center to find information about your version of Media Center. Select UI sounds to turn the sound on or off. Use the arrow buttons to select an option, and then press OK on the remote control.
Page 208 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings Select Scheduled to check a list of scheduled recordings, delete scheduled recordings, resolve recording conflicts, and to change recording priorities for the programs you scheduled to record. Select Recording errors to find out if a program wasn’t recorded.
Page 209 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings Delete recorded shows from the Recorded TV window. For more information, refer to the My TV chapter. Increase the percentage of hard disk space available for recorded TV shows in Default Settings.
Page 210 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings the channel. To hide a channel, clear the check mark by selecting it. Select Change lineup to change the network and Guide information for channels to display correctly. Select Get Guide data to manually update the Television Program Guide from the Internet.
Page 211 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings Use the arrow buttons to select the + or - area. Press the OK button on the remote control to scroll through the movie rating levels. When you find the one you want, use the arrow buttons to select OK in the window, and then press OK on the remote control to enter settings and return to the TV/DVD settings window.
Page 212 Getting to Know the Windows ® XP Media Center Changing the Media Center Settings Use the arrow buttons to select the + or - buttons. Press OK on the remote control to scroll through the choices available. Audio: If you select Secondary Audio Program (SAP) instead of stereo, Media Center allows a simultaneous broadcast of a primary and secondary audio program.
Page 213: Chapter 7: Exploring Your Options
Chapter 7 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: New system file protection A system restore function, allowing you to rollback the system to its previous mode An improved help center, support automation, and automatic Windows...
Page 214: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: Taskbar — which resources to display for quick access Web content —...
Page 215: Changing Desktop And Browsing Style
Changing desktop and browsing style The operating system enables you to customize the way you view your desktop and browse the files and folders on your local computer or network file server. You can arrange that: Items that normally require a double-click will open with a single click.
Page 216: Personalizing Individual Windows
Exploring Your Options Personalizing your desktop Sample Web-style option Click the preferred options. Click Apply, then click OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Page 217: Customizing Window Toolbars
Exploring Your Options Personalizing your desktop Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus.
Page 218: Displaying Information About Each Folder
Exploring Your Options Personalizing your desktop The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears.
Page 219 Double-click the folder you want to open. In the Tools menu, select Folder Options. The Folders Options box appears. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then click OK. Helpful information on how to use the folders appears on one side of the window.
Page 220: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Using your computer at the office By connecting an external monitor, external full-size keyboard, an external mouse and an external diskette drive, you can work with your notebook as if it were a standard office computer.
Page 221 Exchanging data with another computer Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 222: Connecting The Modem To A Telephone Line
RJ45 jack on your computer. A remote network, you need a dial-up connection. A wireless network, you need a wireless networking PC Card, or contact your authorized Toshiba representative. Setting up the connection To set up a dial-up connection, use the New Connection Wizard: Click Start and point to All Programs.
Page 223: Setting Up A Wireless Connection
Your Wi-Fi Mini PCI module or Bluetooth module is integrated into your computer system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. Using Bluetooth The following information applies to those systems with the...
Page 224: Setting Up A Direct Cable Connection
Release the keys. Bluetooth is now enabled. Your Bluetooth module is based on the Bluetooth specification version 1.1. Toshiba cannot confirm all compatibility with PC products and/or electronic devices using Bluetooth other than Toshiba mobile PCs. Setting up a direct cable connection To establish a direct cable connection with another computer: Click Start, All Programs.
Page 225: The Internet
The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet Internet features Uploading and downloading files from the Internet For more information about the Internet, about the Internet” on page The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines.
Page 226: Connecting To The Internet
Exploring Your Options An overview of using the Internet You can connect to the Internet by using a telephone line and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and satellite links. Connecting to the Internet To connect to the Internet, you need: A modem A Web browser...
Page 227: Internet Features
Internet features The Internet offers many types of communication tools to help you perform many tasks. Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 228: Toshiba's Online Resources
Exploring Your Options Toshiba’s online resources Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades. For more information, see “Contacting Toshiba”...
Page 229: Transferring And Editing Video Data
Sample display options window The picture will automatically display on the TV screen If a movie is already playing, turn it off and repeat step 2. You must change to TV Out mode before playing a movie or launching Media Center. As you press the Fn and F5 keys, the display box shifts to highlight the different display output devices.
Page 230: Playing Dvds
Exploring Your Options Exploring video features for devices that transfer high levels of data in real-time, such as video devices. Like your USB ports, the i.LINK port supports hot swapping (the ability to connect and disconnect devices while the computer is on). The main difference between the i.LINK port and your USB ports is that the i.LINK port supports faster data transfer rates.
Page 231: Exploring Audio Features
Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones or external speakers. Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone in jack and using the Sound Recorder feature in the operating system.
Page 232: Adjusting Recording Quality
Exploring Your Options Exploring audio features Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder. Positioning bar Sample Sound Recorder screen Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. When you have finished recording, click the Stop button.
Page 233: Using External Speakers Or Headphones
In the Sound Recorder window, click Edit, then click Audio Properties. In the Audio Properties dialog box, adjust the Sound Playback quality and volume, and the Sound Recording volume. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with a subwoofer and internal speakers.
Page 234: Using Pc Cards
Exploring Your Options Using PC Cards Attaching a headphone or speaker cable Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone/S/ PDIF Digital Optical out. The headphone/S/PDIF Digital Optical out requires a 16- ohm stereo mini-jack.
Page 235: Pc Card Supporting Software
Check the documentation that came with the PC Card to see if it conforms to the PCMCIA 2.1 standard, or later. Other cards may work with your computer, but are likely to be much more difficult to set up and use. PC Card supporting software The operating system provides the Card and Socket Services for your PC Card and is installed automatically.
Page 236: Removing Pc Cards
Exploring Your Options Using PC Cards Align the card connectors with the PC Card slot and carefully slide the card into the slot until it locks into place. To avoid damaging the PC Card or the computer, do not force the card into the PC Card slot.
Page 237: Hot Swapping
Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.
Page 238: Using Sd Cards
Exploring Your Options Using SD cards Using SD cards Your computer supports the use of SD memory/input/output cards. The cards can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc. Inserting an SD card Turn the card so that the metal contacts are face down.
Page 239: Using The Toshiba Style Bay
The TV turner is factory installed in the Toshiba Style bay. If you swap it with another device, be sure to save any unsaved work and then power down the computer before removing and replacing the TV tuner.
Page 240: Removing A Device Form The Toshiba Style Bay
Style bay have been stopped before removing the device. If the locking screw is in place, remove it. Slide the Toshiba Style bay lock to the unlocked position. Pull the Toshiba Style release lever toward the back of the computer. Removing a device from the Toshiba Style bay...
Page 241: Chapter 8: Toshiba Utilities
Fn-esse Hotkey utility TOSHIBA Console TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 242 Toshiba Utilities TOSHIBA Accessibility To open Accessibility: Click Start, then click All Programs. Select Toshiba Utilities, then select Accessibility. The TOSHIBA Accessibility window appears. Check the Use Fn-StickyKey box. Sample TOSHIBA Accessibility window Put a check mark next to the desired option.
Page 243: Fn-Esse
Fn-esse The operating system shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any program without using the Start menu. This section describes how to use the Fn-esse program to quickly access your programs and files. For information on creating operating system shortcuts, see shortcuts”...
Page 244: Assigning A Key To A Program Or Document
Toshiba Utilities Fn-esse Sample Fn-esse keyboard The keys are color-coded as follows: Available keys are black. Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. Unavailable keys are dark gray.
Page 245 HINT: If you are making a direct key assignment, complete step 3. If you are making a popup assignment, complete step 4. To make a direct key assignment, select Direct to display the Add/Edit Command dialog box, then complete these steps: Toshiba Utilities Fn-esse key, then...
Page 246: Viewing Existing Key Assignments
Toshiba Utilities Fn-esse Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click the Browse button to specify this information. Click OK. To make a popup assignment, select Popup to display the Application Explorer window, then complete these steps: Select the desired folder.
Page 247: Changing Or Removing Existing Key Assignments
Stand by [Fn+F3] and Hibernation [Fn+F4]. To activate the utility: Click Start, All Programs, Toshiba Utilities and then click Hotkey utility. The Toshiba Hotkey utility window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option.
Page 248: Toshiba Console
The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. You can normally access the TOSHIBA Console in two ways: Press the TOSHIBA Console button located above the F9 key on your keyboard.
Page 249: Customize Your Computer
The TOSHIBA Console offers three categories of features: Customize Your Computer Network Security Customize your computer The features available in this category are: Power Management (for detailed information, see “Power Management” on page TOSHIBA Button Controls (for detailed information, see “TOSHIBA Button Controls”...
Page 250 Toshiba Utilities TOSHIBA Console Creating a password recovery diskette You can create a password recovery diskette to protect you in case you forget your power-on password. For information on how to set a power-on password, see on password” on page The power-on password must be activated prior to step 1.
Page 251: Toshiba Button Controls
The computer will read the diskette and start the computer. TOSHIBA Button Controls The TOSHIBA Button Controls allow you to enable or disable the TOSHIBA Console and Internet buttons and the programs associated with them. Those buttons are located just above the function keys at the top of the keyboard.
Page 252 You can choose which of two media players you prefer to have as your default (your automatic choice upon powering up) when you play a CD. If you want to change the default setting, do the following: In the TOSHIBA Console, click Toshiba Button Controls. Click the Media Apps tab.
Page 253 Sample Media Apps tab Under Select a Player, choose either the Windows Media Player or TOSHIBA MEDIA PLAYER in the Audio/Video Control and CD Audio Control menu selections. Click Apply, then click OK. You can also program the Sub LCD, the rectangular window in the middle of the CD/DVD control button panel in the front of your computer.
Page 254 Toshiba Utilities TOSHIBA Console Choose the appropriate clock setting, either for 12 or 24 hours, and click the appropriate radio button. Sample SubLCD tab Besides setting the clock, you can also program a message by using the Owner String feature.
Page 255: Power Management
You can either use one of the preset modes or create and use your own customized mode. The preset modes cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can...
Page 256 OK or Apply. Plugged in section This section has a single preset power usage mode Power. You can create other AC power modes, but Toshiba recommends use of the preset Full Power mode. Running on batteries section...
Page 257 The Name field displays the name assigned to the mode in the Power Saver Properties window. You can change the name here if you wish. Toshiba Utilities TOSHIBA Console...
Page 258: Toshiba Hardware Setup
In the TOSHIBA Console, double-click the Toshiba Hardware icon. Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following: General — Allows you to view current BIDS version Password — Allows you to set user passwords.
Page 259 Since the system is a quick-booting system, you must press the arrow keys immediately after pressing the power button. LAN — Lets you enable or disable the Wake on LAN feature. Choose the desired tab and accompanying options. Toshiba Utilities TOSHIBA Console key. Enter ®...
Page 260: Chapter 9: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 261 To close a program that has stopped responding: Press Ctrl Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 262: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
Page 263: The Windows® Operating System Is Not Working
The Windows® operating system is not working The computer displays the message. The computer was placed in Stand by mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 264: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 265: Internet Problems
The Windows® operating system is not working See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 266: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu.
Page 267: Resolving Hardware Conflicts On Your Own
Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 268: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 269: Memory Module Problems
Click Start, Control Panel, Performance and Maintenance, Administrative Tools. Double-click the Computer Management icon. In the left pane, click Device Manager. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the Device Properties dialog box, which provides an array of tabs.
Page 270: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Reinstall the memory module, following the instructions “Installing additional memory (optional)” on page and making sure it is seated properly. Check for the error again. If the error recurs, remove the memory module entirely and check for the error again.
Page 271: Keyboard Problems
The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again. If the battery has completely discharged, it will not begin charging immediately. Leave the AC adapter and power cable connected, wait 20 minutes and see if the battery is charging.
Page 272: Display Problems
If Something Goes Wrong Resolving a hardware conflict If the problem occurs when both the keypad overlays are off, make sure the software you are using is not remapping the keyboard. Refer to the software’s documentation and check that the program does not assign different meanings to any of the keys.
Page 273 Try adjusting the contrast and brightness controls on the external monitor. Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 274: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode.
Page 275 You can choose one or both options: Automatically fix file system errors Scan for and attempt recovery of bad sectors Click Start. Error-checking runs the test. Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented.
Page 276: Dvd-Rom Or Multifunction Drive Problems
If Something Goes Wrong Resolving a hardware conflict The computer displays the message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette.
Page 277: Sound System Problems
Some discs run correctly, but others do not. If the problem is with an application CD-ROM, refer to the software’s documentation and check that the hardware configuration meets the program’s needs. The color of the materials used to make the disc can affect its reliability.
Page 278 If Something Goes Wrong Resolving a hardware conflict Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS). Sometimes the CIS contains enough information for you to use the card immediately.
Page 279 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click My Computer icon with the secondary button, then click Properties.
Page 280: Printer Problems
If Something Goes Wrong Resolving a hardware conflict The operating system displays a message that you may safely remove the card. Remove the card from the slot. The system does not recognize your PC Card. Refer to the PC Card documentation. Removing a malfunctioning card and reinstalling it can correct many problems.
Page 281: Modem Problems
the printer. Turn the printer back on, make sure it is on line, then turn the computer back on. Try printing another file. For example, you could create and attempt to print a short test file using Notepad. If a Notepad file prints correctly, the problem may be in your original file.
Page 282: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits The other system may be busy or off line. Try making a test transmission to someone else. Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes.
Page 283: If You Need Further Assistance
Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. If Something Goes Wrong If you need further assistance...
Page 284: Contacting Toshiba
If you need further assistance Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. Start with accessing Toshiba on the Internet using any Internet browser by typing...
Page 285: Other Toshiba Internet Web Sites
Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Czech Republic CHG Toshiba, s.r.o.
Page 286 Irvine, California 92618 800-457-7777 (within the US) 949-859-4276 (outside of the US - this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 5249-6500...
Page 287 Ur. Quinta Grande 2720 Alfragide Portugal Slovakia HTC a.s. Dobrovicova 8 81109 Bratislava Slovakia Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich...
Page 288: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 289: Instant Password Security
After typing in the password, press To activate the password feature, you must first enable it by using Toshiba Hardware Setup. Refer to Setup” on page To activate the password feature: Click Start, Control Panel.
Page 290: Power Usage Mode
Presentation and Super Long Life Sample power usage modes The power usage mode in the Windows under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. For more information, see Management” on page ®...
Page 291: Stand By Mode
Stand by mode This hot key puts the computer into Stand by mode. Sample Stand by confirmation box Stand by mode A message box is displayed by default to confirm that the computer is going into Stand by mode. This message box can be set so it doesn’t display.
Page 292: Hibernation Mode
Hibernation mode Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it doesn’t display.
Page 293: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. Built-in display panel only Built-in display panel and external monitor simultaneously External monitor only...
Page 294: Display Brightness
Display brightness Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness. Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer. The wireless modes you can toggle between are: Sample wireless modes window Bluetooth enabled—This enables just the Bluetooth module.
Page 295: Disabling Or Enabling The Touchpad
Disabling or enabling the TouchPad This hot key disables or enables the TouchPad. To use the TouchPad, see page Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off.
Page 296: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 297: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 298 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 299 SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 300 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 301 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 302 Glossary color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 303 direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 304 Glossary drag — To hold down the control button or mouse button while moving the cursor to drag a selected object. In the Windows operating system, this refers to the primary control button or left mouse button, unless otherwise stated. driver —...
Page 305 file extension — The three characters following the period (pronounced “dot”) at the end of a file name. The extension indicates the type of file. Examples are .exe for program files and .hlp for help files. See also file name. folder —...
Page 306 Glossary Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 307 L2 (level two) cache — Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory. See also cache, CPU cache, L1 cache. LAN (local area network) — A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network.
Page 308 Glossary MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 309 parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Most modern printers are parallel.
Page 310 Glossary RAM (random access memory) — Volatile memory that can be written to as well as read. By volatile, we mean that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory.
Page 311 serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel.
Page 312 Glossary Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the 802.11 A/B communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) —...
Page 313: Index
Index AC adapter 68 AC power light 47, 68, 71 Accessories programs 160 adding memory 60 alarms low battery 130 audio CDs playing 94 audio features 231 avoiding injury 53 battery alarms 130 changing 131 charge not lasting 271 charging 69, 126 conserving power 129 disposal 133 inserting 132...
Page 314 Index previous track 48 primary control 45 secondary control 45 Start 137 stop 49 TOSHIBA Console 45, 87 calculator 152 CD control buttons 96 CD player TOSHIBA MEDIA PLAYER Windows Media Player 100 CD Player control panel 100, 101 CD/DVD control buttons 45, 48, 94,...
Page 315 computing tips 82 connecting AC adapter 68 external monitor 220 external speakers 233 headphones 234 modem 104 monitor 65 power cable 69 television 65 to a network 105 USB-compatible keyboard 67 mouse 64 video projector 65 conserving battery power 129 control buttons 75 cooling vents CPU 40...
Page 316 Index opening 70 displaying folder information 218 disposing of used batteries 133 DMA (Direct Memory Access) 267 double-click 75 downloading 227 DVD-ROM 93 launch WinDVD 230 DVD-ROM drive 42, 230 inserting a disc 98 problems 276 removing a disc 102 troubleshooting 269 DVD-ROM/CD-RW launch WinDVD 230...
Page 317 keyboard 243 starting 243 using keyboard or pointing device viewing key assignments 246 folders 138 displaying information 218 front panel 46 function keys 44, 84 hard disk drive cover 51 light 47, 72 hardware conflicts 266 resolving 267 headphone/S/PDIF 41 headphones connecting 234 Help 161...
Page 318 46 diskette activity 90 hard disk drive 47, 72 keyboard 45 numeric mode 46 on/off 47 system 45 Toshiba Style bay activity 48 lock slot 42 main battery changing 131 recharging 126 removing 131 memory adding 60...
Page 319 New Folder icon 145 new text document 143 next track button 45, 49, 96 Notepad 144 numeric mode light 46 object properties 155 on/off light 47 online tours 163 operating system 34 Paint program 146 password power-on 72 PC Card checklist 278 CIS (Card Information Structure) computer stops working 279...
Page 320 Index computer hangs when PC Card inserted 279 computer will not power up 262 contacting Toshiba 283, 284 corrupted/damaged data files 275 Device Manager 268 disabling a device 268, 269 disk drive is slow 275 display is blank 272 DVD-ROM/CD-RW drive tray doesn’t eject 276...
Page 321 138 taskbar 138, 149 customizing 214 telephone line connecting the modem 104 television adjusting display 66 connecting 65 text file 143 tips on computing 82 toolbars customizing 217 displaying in a window 218 Toshiba Internet Web sites 285...
Page 322 TOSHIBA Button Controls 100, 251 TOSHIBA Console 87, 248 TOSHIBA Console button 45, 87 Toshiba Hardware Setup 258 TOSHIBA MEDIA PLAYER 100, choosing a default 253 Toshiba Style bay light activity light 48 TouchPad disabling 73 enabling 73 using 74 travelling tips 134...
Page 323 closing programs 151 creating a new folder 145 creating a text file 143 creating shortcuts 152 desktop 135 Help 161, 265 Help and Support 265 opening a Web page 143 problem solving 263 Recycle Bin 158 removing objects 158 resizing or moving windows 148, special features 213 starting programs 146 System Restore 160...

This manual is also suitable for:

Satellite 5205 series

Toshiba 5205-S705 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5: Getting to Know the Windows

Chapter 6: Getting to Know the Windows

Chapter 7: Exploring Your Options

Chapter 8: Toshiba Utilities

Chapter 9: If Something Goes Wrong

Appendix A: Hot Keys

Quick Links

Related Manuals for Toshiba 5205-S705

Summary of Contents for Toshiba 5205-S705