Epson ET-7750 Quick Start Manual

Tank cleanup

Hide thumbs Also See for ET-7750:

Download this manual

ET-7750 Tank Cleanup

How to clean an Ink Tank on ET-7750.

This guide describes the procedure on how clean the Ink Tank from the printer (Works for all

the colors).

1. Start nozzle check print.

2. While print head is off the capping station, unplug the

printer.

3. Remove 2 screws from top of carriage.

Note: You need a small philips screwdriver.

4. Remove the plastic cover from the carriage.

INKJETBIZ

Call Us: a (408) 394-7595 • www.inkjetbiz.com

SUPPORT

TB-ET7750

107-19

Page 1 TB-ET7750 INKJETBIZ 107-19 ET-7750 Tank Cleanup How to clean an Ink Tank on ET-7750. This guide describes the procedure on how clean the Ink Tank from the printer (Works for all the colors). 1. Start nozzle check print. 2. While print head is off the capping station, unplug the printer.
Page 2 SUPPORT TB-ET7750 INKJETBIZ 107-19 5. Pull the ink tube from desired channel and connect it to the syringe tip. Note: For BK channel there are two lines to empty and clean. 6. Pull back on the plunger until tank and line are empty. 7.
Page 3 SUPPORT TB-ET7750 INKJETBIZ 107-19 8. Fill the tank with ink according to its designated color slot. Note: Neon Yellow goes in the PK slot. 9. Connect the syringe to the ink channel. Once the ink is pulled into the syringe stop and recon- nect the hose to the head nipple pin.
Page 4 SUPPORT TB-ET7750 INKJETBIZ 107-19 10. Make sure plastic guide is fastened down. 1 1. Re-install cover and the 2 screws. 12. Go to Maintenance in the printer driver, run a Power Cleaning to ﬂush remaining ink out of print head. Call Us: a (408) 394-7595 •...